summaryrefslogtreecommitdiff
path: root/meta/lib
AgeCommit message (Collapse)AuthorFiles
2014-07-03Added testcase decorator to use in logging. Added class decorator LogResults ↵Lucian Musat3
that outputs test results in separate log file. Signed-off-by: Lucian Musat <georgex.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-03lib/oe/package_manager.py: Fix _pkg_translate_smart_to_oe functionMark Hatle1
File: '/home/mhatle/git/oss/oe-core/meta/lib/oe/package_manager.py', lineno: 278, function: _pkg_translate_smart_to_oe 0274: 0275: if found == 1 and fixed_arch == fixed_cmp_arch: 0276: break 0277: #bb.note('%s, %s -> %s, %s' % (pkg, arch, new_pkg, new_arch)) *** 0278: return new_pkg, new_arch 0279: 0280: def _list_pkg_deps(self): 0281: cmd = [bb.utils.which(os.getenv('PATH'), "rpmresolve"), 0282: "-t", self.image_rpmlib] Exception: UnboundLocalError: local variable 'new_arch' referenced before assignment Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-30oeqa/selftest/_toaster.py: fix 'IndentationError' issuesIonut Chisanovici1
There were some indentation errors when the _toaster.py was merged into master. This patch fix those errors. Signed-off-by: Ionut Chisanovici <ionutx.chisanovici@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-30oeqa/selftest/toaster.py: renamed to _toaster.pyIonut Chisanovici1
In order not to run the toaster selftests by default, we renamed to _toaster.py Signed-off-by: Ionut Chisanovici <ionutx.chisanovici@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-25lib/oe/package_manager.py: Add processing for alternative SDK_OSMark Hatle1
For the meta-mingw layer, we need to process alternative SDK_OS, since this is not a Linux based OS. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-25populate_sdk: Fix TOOLCHAIN_TARGET_TASK_ATTEMPTONLY implementationMark Hatle1
The variable was only partially implemented, and the part that was there was named incorrectly to, missing the 'TASK' piece. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-24oeqa/targetcontrol.py: Separate the matching of supported image fstypes from ↵Corneliu Stoicescu1
the resulting value check. Because we used a bb.fatal call inside the get_image_fstype classmethod, this caused problems when accessed without instantiating the object with a valid bb environment. Separating the matching part of the classmethod(that is usable by outside scripts) from the check of the resulting value. The matching is done within a new classmethod and the latter keeps the old method name and internal functionality, this way we don't have to change any other target controllers code. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-19sstatesig: Add try/except around the stat callsRichard Purdie1
Its possible sstate symlinks to other sstate mirrors which then my get removed/cleaned. If we find invalid symlinks, skip over them rather than error with a backtrace. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13controllers/masterimage.py: Make testimage kernel naming pattern universalCorneliu Stoicescu1
YB: #6254 The QemuTargetControl class does not specify any kernel naming but the runqemu script it uses uses the " KERNEL_IMAGETYPE + MACHINE + '.bin' " naming scheme. Modifying the other major target controller class, MasterImageHardwareTarget, to use the same kernel naming scheme. This is usefull also to outside scripts that want to anticipate the kernel file name for all target controllers. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13oeqa/controllers/testtargetloader.py: add 'import os'Corneliu Stoicescu1
YB: #6254 This module uses os but relies on other modules to import it. Adding 'import os' in order to be self-sustained. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13targetcontrol.py: Add a classmethod to get extra files needed by the target ↵Corneliu Stoicescu1
controllers YB: #6254 Add a new classmethod that can be used by outside scripts to get the extra files needed by the target controllers. An outside script can predict rootfs, manifest and kernel files needed by a target controller, but sometimes there are other files needed. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13masterimage.py: enable dynamical determination of rootfs typeCorneliu Stoicescu1
YB: #6375 Adding support for get_image_fstype() in the MasterImageHardwareTarget and GummibootTarget classes. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13targetcontrol.py: make possible dynamical determination of rootfs typeCorneliu Stoicescu1
YB: #6375 Added a new method get_image_fstype() that autodetermines what fstype to use for the rootfs file. This method uses a new list variable 'supported_image_fstypes' that contains image fstypes supported by the target controller. This method is also a classmethod which means outside scripts can get the image fstype. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13rootfs.py: change the logic in _uninstall_unneededChen Qi1
Previously, if we have 'package-management' and 'read-only-rootfs' both in IMAGE_FEATRUES, we would meet the following error at system start-up. rm: can't remove '/etc/rcS.d/S99run-postinsts': Read-only file system However, what's really expected is that when there's no postinstall script at system start-up, the /etc/rcS.d/S99run-postinsts should not even be there. Whether or not to remove the init script symlinks to run-postinsts should not depend on whether we have 'package-management' in IMAGE_FEATURES; rather, it should only depend on whether we have any postinstall script left to run at system start-up. This patch changes the _uninstall_unneeded function based on the logic stated above. [YOCTO #6257] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-10oeqa/utils/commands.py: add support for postconfig optionCorneliu Stoicescu1
Adding support for postconfig option to the bitbake() and related methods. This enables us to use 'bitbake -R postconfig_file <command>'. Usage: bitbake(cmd, postconfig="some confguration") 'postconfig_file' would contain what we add in 'postconfig' Other methods affected: get_bb_env(), get_bb_var() Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-06-06Added new test cases for bitbake modes (-e -n -p -r -R -c -k)Lucian Musat1
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-01classextend: Fix crosssdk remapping for multilibRichard Purdie1
Multilib builds only require one crosssdk toolchain. We therefore shouldn't be remapping crosssdk names. This resolves build failures looking for weird multilib crosssdk toolchains. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30toaster: toaster oe-selftest supportIonut Chisanovici1
This patch adds toaster tests using the oe-selftest infrastructure. You need to have builds done - the tests will verify data integrity after the toaster collection phase. Once you have your toaster builds done, to run the automated backend tests via oe-selftest do the followings: 1. Update builddir/conf/bblayers.conf to contain the meta-selftest layer 2. From the builddir run: 'oe-selftest toaster' or if you just want to run a single test: 'oe-selftest toaster.Toaster_DB_Tests.testname' This first part adds the meta/lib/oeqa toaster file. Signed-off-by: Ionut Chisanovici <ionutx.chisanovici@intel.com> Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-29sstatesig: Move saferecipedeps handling to be earlierRichard Purdie1
We want to use the saferecipedeps handling code to allow gcc-cross-* to work on multiple different tunes. Its currently in target only code so it needs to be earlier to allow it to work on native-> target dependencies. This change has no effect on existing uses but makes gcc-cross become shared as desired. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-11classes/lib/oe: Fix cross/crosssdk referencesRichard Purdie2
With the renaming of the cross packages, its no longer possible to use endswith("-cross") and similar to detect cross packages. Replace these references with other techniques. This resolves certain build from sstate failures which were due to the system believing cross packages were target packages and therefore dependency handling was altered. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08package_manager: Fix NoneType Object on do_populate_sdkRicardo Ribalda Delgado1
PACKAGE_EXCLUDE can be not defined or empty, leading to a build error. File: '/var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/meta/lib/oe/package_manager.py', lineno: 1649, function: _create_configs 1645: "Pin-Priority: %d\n\n" % (arch, priority)) 1646: 1647: priority += 5 1648: *** 1649: for pkg in self.d.getVar('PACKAGE_EXCLUDE', True).split(): 1650: prefs_file.write( 1651: "Package: %s\n" 1652: "Pin: release *\n" 1653: "Pin-Priority: -1\n\n" % pkg) Exception: AttributeError: 'NoneType' object has no attribute 'split' ERROR: Function failed: do_populate_sdk ERROR: Logfile of failure stored in: /var/lib/jenkins/jobs/qt5022-cesium/workspace/build/tmp/work/bobcat_64-poky-linux/meta-toolchain/1.0-r7/temp/log.do_populate_sdk.21363 NOTE: recipe meta-toolchain-1.0-r7: task do_populate_sdk: Failed Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08package_manager: Fix Argument list too longRicardo Ribalda Delgado1
Function buildhistory_list_installed_image fails with error "Argument list too long". This patch uses a temporal file to pass the package list to opkg-query-helper.py File: '/var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/meta/lib/oe/package_manager.py', lineno: 421, function: list 0417: try: 0418: output = subprocess.check_output("echo -e '%s' | %s" % 0419: (output, opkg_query_cmd), 0420: stderr=subprocess.STDOUT, *** 0421: shell=True) 0422: except subprocess.CalledProcessError as e: 0423: bb.fatal("Cannot compute packages dependencies. Command '%s' " 0424: "returned %d:\n%s" % (e.cmd, e.returncode, e.output)) 0425: Exception: OSError: [Errno 7] Argument list too long ERROR: Function failed: buildhistory_list_installed_image ERROR: Logfile of failure stored in: /var/lib/jenkins/jobs/qt5022-cesium/workspace/build/tmp/work/qt5022-poky-linux/qimage-dev/1.0-r0/temp/log.do_rootfs.16747 NOTE: recipe qimage-dev-1.0-r0: task do_rootfs: Failed ERROR: Task 7 (/var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/../qtec/meta-qt5022/recipes-core/images/qimage-dev.bb, do_rootfs) failed with exit code '1' NOTE: Tasks Summary: Attempted 4999 tasks of which 30 didn't need to be rerun and 1 failed. NOTE: Writing buildhistory Auto packing the repository for optimum performance. Summary: 1 task failed: /var/lib/jenkins/jobs/qt5022-cesium/workspace/repo/yocto/../qtec/meta-qt5022/recipes-core/images/qimage-dev.bb, do_rootfs Summary: There were 74 WARNING messages shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-04sstatetests: Use TUNE_ARCH instead of TARGET_ARCHRichard Purdie1
The scripts extact variable values from bitbake -e. Unfortunately TARGET_ARCH is unset from that environment so we use TUNE_ARCH instead which will have the value we need. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-04sstatetests: Update after binutils-cross name change with PN additionRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30oeqa: add proper handling for command errors where neededPaul Eggleton3
For use outside of tests themselves, we want a better error than AssertionError, so create one and allow us to request it when calling runCmd(). This enables us to avoid tracebacks during master image operations if the power control command fails. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30classes/testimage: if start fails, don't try to stopPaul Eggleton1
If we couldn't start the target, it doesn't make sense to try and stop it here since logically it shouldn't now be in any kind of "started" state. (It's the start function's job to clean up after itself if it fails - to that end, fix up the QemuTarget class so that it does.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30oeqa/controllers/masterimage: more robust master image startupPaul Eggleton1
Instead of powering up the target when the object is constructed, wait until deploy is called. Then there are basically two different scenarios: a) The device is booted into the master image already, in which case we can just use it b) The device is booted into another image or can't be contacted, in which case we need to power cycle it. Here we also now wait until it has booted up instead of trying to contact it immediately. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30oeqa/controllers/masterimage: add a serial control commandStefan Stanacar1
Similar to power control command, this depends on a user's setup to get to the serial port of a board. For a local connected board this could just be: TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200" and for a serial console server: "telnet 10.11.12.13 7003" or some conmux command. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30oeqa/targetcontrol: restart method shouldn't be abstractStefan Stanacar2
And drop the un-needed and un-used restart methods. Only qemu ever used this and actually does it safely. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30oeqa/controllers/masterimage: add a base class for hw targetsStefan Stanacar1
Right now GummibootTarget is the only hardware TEST_TARGET with deployment, but we will add more, so let's make an abstract base class, that will do the common thing for all the hw targets. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30lib/oe/sdk: Ensure target directory exists before creating the linkRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-29oeqa/utils: sshcontrol: realtime logging of outputStefan Stanacar1
Log the output of the command as it runs not when it finished, else tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log isn't as useful as it could be. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-04-25Globally replace oe.utils.contains to bb.utils.containsOtavio Salvador2
BitBake has the exact same code as oe.utils.contains so there's no reason to duplicate it. We now rely on the bb.utils.contains code for metadata. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-23make menuconfig work for recent xfce environmentAndreas Müller1
xfce terminal was renamed 'Terminal' -> 'xfce4-teminal' mainline end of 2012, so the distros supporting 'Terminal' will dissapear. The distros not mentionied in __init__ do (e.g fedora 19 - tested) fail - or will fail sooner or later. Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-23selftest: DiskMonTest: use a high value for free spaceStefan Stanacar1
Using the free space of the host works when oe-selftest is the only build running, but if something else on the host remove things this will fail (as seen on AB). Using an absurdly high value should fix this. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-10selftest: DiskMonTest: use POSIX output for dfAlexandru Palalau1
Without "-P" df splits the output on multiple lines and breaks the test Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-04selftest/sstatetests.py: Added 'populate_lic' to ignore_patternsCorneliu Stoicescu1
Because the sstate-cache-management script does not remove populate_lic sstate files, we should ignore them when checking for removed files. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-04rootfs.py: introduce USE_DEVFS checkMatthieu Crapet1
Since commit a83144bac8d67704ff66f5dc0fc56f5b63979694 (2014-02-11), USE_DEVFS is not considered anymore. For compatibility, let's restore USE_DEVFS semantic. Also add USE_DEVFS to documentation.conf. Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-31lib/oeqa: add a test target controller for EFI targetsStefan Stanacar2
The purpose of this module is to deploy a test image on a EFI-enabled hardware and run our runtime tests. A bit of background: - testimage.bbclass uses the concept of TEST_TARGET which is a class name that is responsible for target deploying. A layer can provide it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget (ssh into an already up and running machine and run tests), the default one being qemu. - basically testimage does something like: target.deploy() try: target.start() runTests() finally: target.stop() This module assumes a running EFI machine with gummiboot as bootloader and core-image-testmaster installed (or similar). Also your hardware under test has to be in a DHCP-enabled network that gives it the same IP for each reboot. One time setup (master image): - build core-image-testmaster with EFI_PROVIDER = "gummiboot" - install the image on the target Test image setup: - build your test image, e.g core-image-sato as you usually do, but with these in local.conf: IMAGE_FSTYPES += "tar.gz" - Now run the tests: INHERIT += "testimage" TEST_TARGET = "GummibootTarget" TEST_TARGET_IP = "192.168.2.3" bitbake core-image-sato -c testimage Other notes: - TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling. The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf. Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'. The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being that it accepts: on/off/cycle as the last argument. - if no command is defined it would use classic reboot. This is fine as long as the machine actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where some manual interaction is okay from time to time. [YOCTO #5614] Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-30sstatesig: Anchor inherits class testsRichard Purdie1
There was a nasty sstate hash corruption issue occurring where the fact the testimage bbclass was inherited meant that the checksum changed due to testimage.bbclass being confused with image.bbclass. This patch anchors the bbclass names to avoid this confusion. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-28image.py: check file exists before deletingLaurentiu Palcu1
When RM_OLD_IMAGE = "1", we delete old images but we didn't check they actually exist... [YOCTO #6029] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-28rootfs.py: add new cleanup methodLaurentiu Palcu1
This commit adds a new _cleanup() internal method that will be called at the end of rootfs creation, so that each backend can delete various files that were probably generated during rootfs postprocess execution, etc. [YOCTO #6049] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-28package_manager.py: leave the __db.00* files in placeLaurentiu Palcu1
Do not delete the __db.00* files in the PackageManager class. Leave this operation up to the client classes. One side effect of this deletion was the following message appearing in the output of the next rpm command executed: rpmdb: BDB1540 configured environment flags incompatible with existing environment We might also gain some time here by not deleting/creating those files very often. [YOCTO #6049] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-27selftest/bbtests.py: Fixed regex and added bitbake output to ↵Corneliu Stoicescu1
test_warnings_errors The test failed when more than 1 error or 1 warning is present. Also pasting the bitbake output when the test fails. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-26apt/package_mamager: Ensure WORKDIR is used for lists directoryRichard Purdie1
The native sysroot should not be used as a store for the lists files since multiple images running at once would conflict over this. Instead redirect this to WORKDIR. This means some extra directories need to be created. Also create apt.conf.d to silence some warnings. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-26package_manager: Fix apt-ftparchive index creation problemsRichard Purdie1
a) There were missing parameters to the release and package commands (".") b) The commands need to be executed as one block since they build upon each other Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-26package_manager: Ensure we don't process directories twiceRichard Purdie1
Processing directories twice is both pointless and introduces a race condition. When building the list, ensure duplicates (like "all" and "noarch") are handled correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21rootfs.py, sdk.py: adjust/create the wrappers for creating installed ↵Laurentiu Palcu2
packages list Since we created a new PkgsList object that will deal with listing the installed packages in a rootfs, use the new class both for images and SDKs in the wrapper functions. The old list_installed_packages() wrapper listed only the packages inside an image rootfs. It didn't deal with target/host SDK rootfs's. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21package_manager.py: create separate class for installed packages listingLaurentiu Palcu1
This commit creates a new class that has the only purpose to generate various listings of installed packages in the rootfs. Basically, the methods involved in listing the installed packages, that were part of each backend PM class implementation, were moved to this new class. This change avoids instantiating a new PM object just to get the list of installed packages in a certain rootfs. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-19package_manager: Use apt-ftparchive for deb packagesRicardo Ribalda Delgado1
Use apt-ftparchive to create a Release file compatible with SecureApt. apt-ftparchive is also a more efficient replacement of dpkg-scanpackages: root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/bobcat _64# time PSEUDO_UNLOAD=1 apt-ftparchive packages . >/tmp/kkk real 0m26.873s user 0m20.968s sys 0m1.212s root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/bobcat _64# time PSEUDO_UNLOAD=1 dpkg-scanpackages . >/tmp/kkk dpkg-scanpackages: info: Wrote 6022 entries to output Packages file. real 0m59.721s user 0m16.668s sys 0m11.164s apt-ftparchive is not compatible with libpseudo. The calls to ftw() returns the path in absolute format instead of relative. This produces wrong Packages and Release files. ie: MD5Sum: d20227a958f6870137ce0e41b7b84307 1453 /home/ricardo/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/all/Release This is why it is called with PSEUDO_UNLOAD. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 10:23:24 +0000