| Age | Commit message (Collapse) | Author | Files |
|---|
|
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While harmless, we should overwrite the config not append to it,
and use m4 as target, otherwise the WARN check will
build an entire image and we are not interested in that.
Also add an output check for the WARN_QA test.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
complete cleanup at the end
The script should clean-up all the .inc files that might
have been created by tests regardless of the outcome or if
the script is interrupted. (currently the
last test will leave a conf/selftest.inc around, even
if it's not included anywhere)
Also fix delete_recipeinc to actually delete what's supposed to.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
targets
Add a new module which abstracts the target object used by testimage.bbclass
The purpose of this module is to move the deployment of a target from testimage.bbclass,
basically abstracting different implementations of how we setup a target and how it runs commands.
It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote").
QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass)
SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running
with network and ssh.
Simply put, it opens the door for running the tests on different types of targets by adding new classes
(maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses
the existing SSHControl module and add a serial implementation.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new manifest file instead of ${WORKDIR}/installed_pkgs.txt for determining
if an image has a certain package, because installed_pkgs.txt goes away with rm_work
enabled.
We can't use the IMAGE_MANIFEST var for the file path because that relies on IMAGE_NAME which
changes at every run (because of date), so we use the link which points to the last
one built.
[ YOCTO #5072 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake-layers
Tests for bitbake-layers and expected output for some bitbake options.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build images and tests different build options like RM_OLD_IMAGE
and for WARN_QA/ERROR_QA behaviour.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
various scripts
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connman unique test starts another instance of connmand and then does a ps to
verify that there's only one of these running, on the assumption that the new
one has quit because there's already one running (started by init).
However, connmand is forking into the background straight away so there's a race
between running ps and the second connmand discovering the first and exiting.
This race can be seen because the test displays the output of ps, and by the
time that second ps has been executed the new connmand has exited.
This is a classic race condition and on a heavily loaded autobuilder inserting
an arbitrary sleep isn't wise. In the scheme of things this test isn't very
useful, so delete it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of running the commands with a fixed timeout,
we should kill the command if there is no output
for timeout seconds.
Also changed some strings/comments.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add oeTest superclass, make oeRuntimeTest inherit that and
make the necesarry adjustments. Tests in lib/oeqa/runtime don't
change, they still inherit oeRuntimeTest.
We should do this because oetest.py in the future can be a base module
for more stuff than oeRuntimeTest.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Builds a simple Hello World module on target.
Added to the defaults for core-image-sato-sdk.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new QEMU_DONT_GRAB environment variable to disable grabs,
finally/hopefully solving the random hangs that the autobuilder has been hitting
for a while.
[ YOCTO #5131 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Increase the timeout for smart commands as under load for qemumips
it's still to small. Also give ping more time fixing a potential
timeout for sato systemd.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't add inappropiate channels on the target.
This happens when building two different machines in the
same dir and then running the tests for each machine.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A 0 value to select.select() immediately returns with no timeout. This was
pegging the cpu at 100% for the python process which was bad and may be
contributing to some of the timeout problems.
Profile from -P of a core-image-minimal before:
97526792 function calls (97525652 primitive calls) in 45.189 seconds
and after:
50204 function calls (49064 primitive calls) in 17.318 seconds
Saving 97.5 million function calls has to be good :)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This uses scanelf from the pax-utils package and scans the binaries in PATH
for TEXTREL and RPATH information. For a sato image with pax-utils installed
it shows no output (which is good).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a file object to generate a our test file instead of calling `dd`;
removes dd's output from testimage.log, keeps unittest output clean.
Also remove unused imports.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set longMessage to True for all tests derived from oeRuntimeTest, in
order to have somewhat info on assertions with cryptic or no messages.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:
qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply, but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
-w deadline
Specify a timeout, in seconds, before ping exits regardless of
how many packets have been sent or received. In this case ping
does not stop after count packet are sent, it waits either for
deadline expire or until count probes are answered or for some
error notification from network.
Just when the link up/link down happens ping returns:
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
and exits sooner than the 30 seconds timeout.
This patch should do what was originally intended (wait at most
30 seconds for at least one reply).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recently syslog behaviour changed for systemd images (log
it's in a buffer not in /var/log/messages), account
for the new stuff.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4a8cde3c9bb05800240c0a0f5dedf8d
changed the kill method and broke this code, so let's fix it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f /
poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but
in the wrong location.
I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was
unintentional, it should have been under meta/lib/oeqa/runtime.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as
normal) and enable them with TEST_SUITES_append = " testname". Test
module names shouldn't collide though.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
These checks are unnecessary.
setUpModule is run when a module is loaded and we
shouldn't run commands on the target here, (plus if
ssh doesn't work we error out in setup multiple times, instead
of skipping the real test, which might depend on test_ssh).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Sometimes smart throws:
Committing transaction...
Preparing... ######################################## [ 0%]
1:Removing psplash-default ######################################## [100%]
error: Couldn't fork %postun: Cannot allocate memory
and returns a 0 exit code (it thinks it succesfully removed the package,
when in reality it didn't), so we need to catch those specifically.
Also, sometimes output from download command is:
Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm
and that tricks our smart download test, so use a regex there.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
The check was obviously wrong and it surfaced
with the recent change in behaviour for skipping tests.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
When a test module wants to be skipped because it doesn't
apply to the image but it was nevertheless a required
test (one in TEST_SUITES), we issued an warning that it
was a required test and went on with running the module.
Usually all tests in the module failed (e.g gcc tests on a non-sdk image),
but this allowed us to know that something went wrong with the image
(some package/feature didn't make it).
However, instead of just issuing an warning and running the tests
it's better to throw an exception. The traceback will tell us what's wrong,
and we don't run every single test method.
Output will look like this:
--snip--
| NOTE: Test modules ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc']
| NOTE: Found 5 tests
| test_ping (oeqa.runtime.ping.PingTest) ... ok
| test_ssh (oeqa.runtime.ssh.SshTest) ... ok
| ERROR
|
| ======================================================================
| ERROR: setUpModule (oeqa.runtime.gcc)
| ----------------------------------------------------------------------
| Traceback (most recent call last):
| File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule
| skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES")
| File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule
| "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason))
| Exception:
| Test gcc wants to be skipped.
| Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES
| Test was required in TEST_SUITES, so either the condition for skipping is wrong
| or the image really doesn't have the requred feature/package when it should.
|
| ----------------------------------------------------------------------
| Ran 2 tests in 1.036s
|
| FAILED (errors=1)
| NOTE: Sending SIGTERM to runqemu
--snip--
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Downloads iptables/cvs/sudoku-savant sources and builds them on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This class can be used for test cases that configure
and build packages on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tweak QemuRunner so we can actually restart the
qemu target in a test (if we want more memory for example).
Also add a restart method to the base test class so that tests
can use it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add class to be inherited by smart tests, along with more basic tests and tests
using a rpm repository.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Decorators should return whatever the decorated methods return.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Save host IP address to host_ip.
Read /proc/PID/cmdline on host to look for IPs of target and host;
instead of running 'ps'.
Also removed some extra empty lines from file.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
to the target
It can be used by smart repo/channel tests to serve deploy_dir.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies to target rpm-doc file from deploy_dir
and tries to install and then remove that package.
rpm-doc was chosen because it's small, it only adds
a few files to target, and it's almost always found in
deploy_dir for images with package-management/rpm.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies a 5MB to target using scp, more of an
network test than a scp one.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies some usual commands functionality with PAM support
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies the usage of skeleton init script available with meta-skeleton layer
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New logrotate test which verifies the log directory change in logrotate.conf.
Needs an image with logrotate installed.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
