summaryrefslogtreecommitdiff
path: root/meta/lib/oeqa/runtime
AgeCommit message (Collapse)AuthorFiles
2019-02-25logrotate.py: restore /etc/logrotate.d/wtmpMingli Yu1
During the test logrotate.LogrotateTest.test_1_logrotate_setup, there is below logic: # mkdir $HOME/logrotate_dir # sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp After all logrotate.LogrotateTest finished, only cleanup $HOME/logrotate_dir as below, but don't restore the config file /etc/logrotate.d/wtmp. [snip] def tearDownClass(cls): cls.tc.target.run('rm -rf $HOME/logrotate_dir') [snip] That's to say, there is one additional line added to /etc/logrotate.d/wtmp and will make the logrotate service start failed when run systemd.SystemdBasicTests.test_systemd_failed Take an example as below when run test as root: # cat /etc/logrotate.d/wtmp # no packages own wtmp -- we'll rotate it here /var/log/wtmp { olddir /root/logrotate_dir missingok monthly create 0664 root utmp minsize 1M rotate 1 } # ls /root/logrotate_dir ls: cannot access '/root/logrotate_dir': No such file or directory # systemctl start logrotate Job for logrotate.service failed because the control process exited with error code. See "systemctl status logrotate.service" and "journalctl -xe" for details. # systemctl status logrotate logrotate.service - Rotate log files Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset> Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago Docs: man:logrotate(8) man:logrotate.conf(5) Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE) Main PID: 540 (code=exited, status=1/FAILURE) Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files... Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'. Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files. Add the logic to restore /etc/logrotate.d/wtmp to make the cleanup complete to fix the above issue. (From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/runtime/ptest: Ensure OOM errors are loggedRichard Purdie1
Currently processed being killed by the OOM killer may not be spotted by ptest-runner. After we complete the tests, check the logs and report if there were any. This ensures the user is aware of OOM conditions affecting the ptest results. (From OE-Core rev: 20a441d53817f80e0ce1597e77f6e794422ac49a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/logparser: Various misc cleanupsRichard Purdie1
Get rid of further unneeded code complications: * value mappings we could just direct use * ftools when we can write files easily ourself * test result status filtering we don't use * variable overwriting module imports (From OE-Core rev: d6065f136f6d353c3054cc3f440a4e259509f876) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/logparser: Improve results handlingRichard Purdie1
Merge the results handling into the ptest log parser as a seperate method. Drop the weird "pass.skip.fail." prefix to the results filename, its just bizarre. Drop the code turning a list into a regex then searching the regex for an item, "x in y" is perfectly capable. Use a dict, sort the keys as needed and drop the list sorting code. (From OE-Core rev: f317800e950b4a37b4034133bc52e0c47f04dc29) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/utils/logparser: Add in support for duration, exitcode and logs by sectionRichard Purdie1
Allow parsing of the ptest duration, exit code and timeout keywords from the logs, returning data on each section. Also include the logs broken out per section. (From OE-Core rev: a9a67dccaa5be0f06eedcab46dcff7cbf9202850) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/logparser: Reform the ptest results parserRichard Purdie1
Now we have a dedicated ptest parser, merge in the remaining ptest specific pieces to further clarify and simplify the code, moving to a point where we can consider extending/enhancing it. (From OE-Core rev: 05991bb5bc8018275d03fdeecee3d5a757840c7c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/logparser: Further simplification/clarificationRichard Purdie1
Rename the paster to be ptest specific and apply some further cleanups to the code to simplify and clarify what its doing. (From OE-Core rev: 45a5886f1ec458d4c306b8d68fd31d568bc36b47) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/utils/logparser: Simplify ptest log parsing codeRichard Purdie1
logparser is only used by ptest. Its slightly overcomplicated as it was intended to be reusable but wasn't. Simplify it as a dedicated parser is likely to me more readable and maintainable. (From OE-Core rev: c7478345b2b4a85cb1fec40e762633871f0e94cb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25oeqa/runtime/ptest: Avoid traceback for tests with no sectionRichard Purdie1
Some tests end up without a section, avoid tracebacks trying to use None as a string in that case. (From OE-Core rev: 86fb5d898a29761f120c2eaa538a32cf2e078487) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-02-25perl: add testdepends for sshArmin Kuster1
fixes: DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print' | DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057 | DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused for master/thud/sumo (From OE-Core rev: a590e7805e3bec5dd995f7ea0b9e79a21f82b48b) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-01-28oeqa/qemu & runtime: qemu do not need ip input from externalYeoh Ee Peng1
Qemu do not use the ip input from external. It will retrieve ip from QemuRunner instance and assign ip value. (From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-01-28oeqa/runtime/cases: Improve dependencies of kernel/gcc/build testsRichard Purdie6
Mark up these tests as needing a compiler, make and kernel source code as appropriate, the image feature requirements can then be retired. (From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-01-28oeqa/runtime/cases: Improve test dependency informationRichard Purdie10
Add the OEHasPackage decorator to a variety of tests so they determine automatically if they should run against a given image. To ensure tests can do this we need to move target operations such as scp commands into the tests and out of the class startup/teardown. (From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2019-01-28oeqa: make it work for multiple usersRobert Yang1
There are failures when multiple users run oe-selftest on the same host: PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved- tests/201812250324_qemu' This is because /tmp/oe-saved-tests was created by user A, while user B tries to write data in it, then the error will happen. This patch can fix the problem. Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than /tmp/oe-saved-tests/ to fix the problem. (From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2018-11-16oeqa/utils/httpserver: Rework to avoid hangs and improve loggingRichard Purdie3
testimage.bbclass installs a SIGTERM handler which conflicts with the use of multiprocessing here. This is paritcularly problematic if the http service is terminated before its started and hence before its had a chance to reset the default signal handler (as the code was written). Instead, temporarily remove testimage's handler whilst forking the http process which means the correct handler is installed and won't deadlock. Also take the opportunity to add in some log messages about the server start and shutdown so that future debugging is easier and its clearer what the code is doing. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-06oeqa/runtime/ptest: Inject results+logs into stored json results fileRichard Purdie1
This allows the ptest results from ptest-runner, run in an image to be transferred over to the resulting json results output. Each test is given a pass/skip/fail so individual results can be monitored and the raw log output from the ptest-runner is also dumped into the results json file as this means after the fact debugging becomes much easier. Currently the log output is not split up per test but that would make a good future enhancement. I attempted to implement this as python subTests however it failed as the output was too confusing, subTests don't support any kind of log output handling, subTest successes aren't logged and it was making things far more complex than they needed to be. We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest will pass currently and we don't want that to fail the whole image test run. Its assumed there would be later analysis of the json output to determine regressions. We do have to change the test runner code so that 'unexpectedsuccess' is not a failure. Also, the test names are manipuated to remove spaces and brackets with "_" used as a replacement and any duplicate occurrences truncated. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-12ksample.py: fix error messageChen Qi1
The current error message is like: kobject-example.kodoesn't exist Add a space so that it looks like: kobject-example.ko doesn't exist Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-11oeqa/runtime/opkg: Ensure the test works on multilibRichard Purdie1
After allarch was disabled in multilib, this test broke. Fix the test to account for that change. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-30oeqa/runtime/dnf: Make sure test_dnf_install does not skippedYeoh Ee Peng1
During debugging dnf issue, we found that the test_dnf_install PASSED the testing even though the environment does not allow dnf install to run successfully. Further debugging had identified that current test_dnf_install will execute dnf install even when the package to be installed already exist, thus dnf install will just skipped and this test will PASSED even though it was not. To solve this, added additional logic to check if the package to be installed already exist, if yes then remove the package before actually run dnf install. This will make sure dnf install was tested as expected. Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23oeqa/runtime/ldd: Clean up testRichard Purdie1
* Merge the two tests together as having them separate is pointless * Test that ldd runs correctly * Add in a dependency on the "ldd" package being installed instead of the sdk tools feature Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-19kernel-devsrc: restructure for out of tree (and on target) module buildsBruce Ashfield1
The existing kernel-devsrc package starts with a full copy of the kernel source and then starts to strip out elements that are not required. This results in extra time (I/O) and extra space being taken up in the final package. The main purpose of the kernel-devsrc package has been to build modules against the running kernel, not to include a full copy of the source code for re-building the kernel. The end result was a 600M kernel-devsrc package. This restructuring of the package uses an approach similar to other distros, where the kernel-devsrc package is for building against the running kernel and uses a curated set of copied infrastructure, versus a mass copy of the entire kernel. The differences in this approach versus other is largely due to the architecture support and the split build/source directory of the kernel. The result is a kernel-devsrc package of about 10M, which is capable of running "make scripts" and compiling kernel modules against the running kernel. Along with the changes to the copying of the infrascture, we also have the following changes: - a better/more explicit listing of dependencies for on-target builds of "make scripts" or "make modules_prepare" - The kernel source is installed into /lib/modules/<version>/build and a symlink created from /usr/src/kernel to the new location. This aligns with the standard location for module support code - There is also a symlink from /lib/modules/<version>/source -> build to reserve a spot for a new package that is simply the kernel source. That package is not part of this update. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-16runtime selftest: limit kernel hw bp archesHongzhi.Song1
1. So far, only qemux86[-64] support hw breakpoint, no matter whether or not with kvm. qemuppc: The oe-core configuration uses a PPC G4 system as the default cpu but qemu doesn't simulate the hw breakpoint register for G4. qemuarm: The arch more than v7 supports hw breakpoint, however arm use v5 as default. qemuarm64: We temporarily drop qemuarm64 for the moment. Normally it will print debug info once, but endlessly when we trigger the break point. Now it is hard to located the issue, but we will confirm it later. qemumips*: Kernel dosen't support hw bp for mips. 2. Syslog maybe not started, so we use dmesg to confirm. 3. Running 'ls' to trigger the hardware breakpoint test. Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-16runtime selftest: test_trace_events_sample of ksample.pyHongzhi.Song1
The debug info can not be written to trace buffer immediately by thread. So we should sleep some seconds. Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-14parselogs.py: output correct log locationChen Qi1
The log entry in results is altered to remove 'target_logs'. This causes wrong log location in output. e.g. AssertionError: 1 != 0 : Log: /path/to/image/1.0-r0/postinstall.log But when user wants to check the log, the user will find the log is not present. The actual log file is /path/to/image/1.0-r0/target_logs/postinstall.log. So fix to use the correct log location. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-08context.py: Do not mask exceptions needlessly.Paulo Neves1
There were a lot of assumptions in the controller import code of context.py which were not true anymore. These assumptions reflected themselves by catching exceptions and re-raising them with unhelpful error messages in other parts of the code. This commit does not fix the classes controller classes that became broken after the refactor but at least it allows for the exceptions to be thrown where the imports fail, thus actually showing what exactly went wrong with the import. An example of such an improvement is that before if the controller class failed during it's init contructor the controller would just be skipped and the task would just complain it could not find the controller. Now for example, if there is a NamerError due to a variable not being declared, the user will get that report. Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-08-08oe_syslog.py: fix for syslog-ngChen Qi1
When using syslog-ng as the syslog provider, oe_syslog test case fails because it cannot find the syslog daemon. This is because it greps for 'syslogd' but syslog-ng's daemon is 'syslog-ng'. So fix it to check both 'syslogd' and 'syslog-ng'. Also, when the test case fails, what I get is: | AssertionError: 1 != 0 : No syslogd process; ps output: <empty here> This does not help user. The output is actually from the 'PS | GREP' command. And when the 'PS | GREP' command fails, the output is always empty. So also fix this problem. After the change, it looks like: | AssertionError: False is not true : No syslog daemon process; ps output: | PID USER VSZ STAT COMMAND | 1 root 16476 S {systemd} /sbin/init | 2 root 0 SW [kthreadd] | 3 root 0 IW [kworker/0:0] ... Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-07-31systemd.py: increase default bus timeoutChen Qi1
Use SYSTEMD_BUS_TIMEOUT to set default timeout to 240s to avoid timeout problem on slow qemu machines. Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
2018-07-31parselogs.py: ignore network interface name changing failureChen Qi1
The following error from systemd-udevd is not harmful. It's just because our qemu targets are using eth0. Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy Note that systemd is using a different network interface naming scheme from traditional ethX naming scheme. To make this error message go away, we could symlink /etc/udev/rules.d/80-net-setup-link.rules to /dev/null to recover traditional naming scheme. But I'm not sure if this will cause regression in user experience for systemd users of OE. So just ignore this error message so that parselogs.py test case does not fail. Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
2018-07-31oe_syslog.py: fix settings in OEHasPackage decoratorChen Qi1
1. For test_syslog_running, we should not restrict it to run for only busybox-syslog and sysklogd. So extend it to all syslog providers in oe-core and meta-openembedded. 2. For test_syslog_startup_config, fix to make it depend on the existence of busybox-syslog. The previous condition "!sysklogd && busybox" is incorrect, because busybox may be compiled without syslog support, and sysklogd and busybox-syslog conflict with each other. Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
2018-07-30oeqa/runtime/scanelf: removeRoss Burton1
These tests are intended to search for bad RPATHs and text relocations, but we do these tests at buildtime and as pax-utils is never installed in any default images the tests are never executed. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-26oeqa: rationalise Perl testsRoss Burton1
As with the Python test, this can be both better and faster. No need to copy a file, just run a one-liner. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-18oeqa/runtime/python: clean up Python testRoss Burton1
Currently this is three test cases: 1) test_python_exists. Fail if python3 isn't in PATH. 2) test_python_stdout. Run a Python script and check the output is as expected 3) test_python_testfile. Check that a file test_python_stdout wrote to exists. (1) should be a setup and skip the test module if it isn't present. (2) and (3) should be merged, there's no point copying over a two line Python file, and the test doesn't verify that the file doesn't exist in the first place. Rewrite the test to check that Python is present in a class setup so the entire test is skipped if it isn't and do some simple rot13 to verify that bytecode is being executed correctly. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-18oeqa/parselogs: remove references to BSPs that no longer existAnuj Mittal1
These platform specifc BSPs were removed from meta-intel and superseded by intel-core* BSPs. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-05oeqa/runtime/cases/parselog.py: ignore a message from westonChen Qi1
The following error message when starting core-image-weston is not critical as long as the image could start up correctly. So extend the common_errors list for parselog.py test case to ignore this message. logind: cannot setup systemd-logind helper (-61), using legacy fallback [YOCTO #12835] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-02oeqa/runtime: Add testcases for kernel sampleHongzhi.Song1
We are going to let runtime test support kernel tests. Now we just add kernel self-contained sample tests. And we plan to add overall kernel tests in the future. This patch is just add kernel samples test which contains about 13 tests enabled by kernel-sample.scc. So it needs statement, KERNEL_FEATURES_append += " features/kernel-sample/kernel-sample.scc" in local.conf. Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-18oeqa/runtime/cases/rpm.py: change to use base-passwd-docChen Qi1
The test cases assume that rpm-doc is built out, as it says it its comment. This is not always true. And it sometimes results in following error. | cls.tc.target.copyTo(test_file, dst) | UnboundLocalError: local variable 'test_file' referenced before assignment Change to use base-passwd-doc, as this package is more likely to be built out than rpm-doc. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-18oeqa/runtime/cases/parselogs.py: ignore a message from watchdogChen Qi1
The following message from watchdog is not an error. "error retry time-out = 60 seconds" Checking watchdog's source codes, we have: src/watchdog.c: log_message(LOG_INFO, "error retry time-out = %d seconds", retry_timeout); It's clear this is an info message, so parselogs should ignore it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-18oeqa/runtime/cases/parselogs.py: extend common_errors listChen Qi1
Add the following line to common_errors list. Failed to read /var/lib/nfs/statd/state: Success This message is not harmful, it does not result in rpc.statd starting failure. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-07oeqa/runtime/dnf: Fix test error when static libs are enabledRichard Purdie1
The test works by excluding curl-dev which curl-staticdev depends upon. When static libraries aren't disabled, this leads to an odd looking test failure. Simply exclude curl-staticdev as well in case its enabled to make sure the test always works. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-07oeqa: replace Alex Kanavin's @intel email address with a personal oneAlexander Kanavin1
As I will be leaving Intel, this address will no longer be valid, so swap it for my personal one for now. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-04oeqa/runtime/cases/multilib.py: fix test_file_connman skipping logicChen Qi1
The test_file_connman should be executed only when 'lib32-connman' is installed and 'connman' is not installed. When lib32-connman and connman are both installed, the /usr/sbin/connmand could be from connman or lib32-connman, depending on the installation order. What we want to check is the connmand command from lib32-connman, so we need to make sure that connman is not there to cause chaos. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-04oeqa/runtime/cases/multilib.py: skip if needed packages are not availableChen Qi1
1) The test cases use 'readelf' command to do the check. This command is from binutils. So skip the test if the needed binutils package is not installed. The related error message in log.do_testimage is like below. Output: sh: readelf: not found 2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test if lib32-libc6 is not installed. The related error message in log.do_testimage is like below. Output: readelf: Error: 'lib/libc.so.6': No such file Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-04oeqa/runtime/cases/rpm.py: skip if rpm not availableChen Qi1
This test case should only run when rpm package is installed. So skip it if rpm package is not installed. This fixes: RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-05-14runtime/dnf: Add new dnf test casesJose Perez Carranza1
Add test cases to test “exclude” and “installroot“ options, also modify the logic of filtering packages on the feed to have all the packages needed by the tests. [YOCTO #10744] Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-05-04oeqa/runtime/cases/python: use python 3 rather than python 2Alexander Kanavin1
For example, core-image-sato skipped the test alltogether, as it no longer pulls in Python 2.x at all. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-05-04logrotate: update to 3.14.0Yi Zhao1
Since the wtmp and btmp definitions had been moved from logrotate.conf to logrotate.d in this release, we also need to install them to /etc/logrotate.d/. Also update oeqa runtime logrotate test case. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-04-18oeqa/runtime/stap.py: add runtime test for systemtapVictor Kamensky2
Add runtime test for stap to test basic SystemTap operations: can compile very basic module and run on target device. Note we disable (-DSTP_NO_VERREL_CHECK) SystemTap additional kernel release check since during OE testing mismatching kernel-devsrc and kernels are used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-30make-mod-scripts/kernel-devsrc: Fix objtool issuesRichard Purdie1
Kernels which use tools/objtool can now fail when building external modules due to objtool being missing, the generated files can also cause problems for kernel-devsrc. Ensure objtool is generated in make-mod-scripts by also calling "make prepare". For devsrc, delete the generated binaries since they'd be native binaries and unsuitable for the target. The oeqa kernel module tests also need to have the additional "make prepare" step added. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-04oeqa/runtime/opkg.py: add runtime test for opkgYeoh Ee Peng1
Add runtime test for opkg to test that it can install ipk package from remote source. [YOCTO# 11488] Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-04oeqa/runtime/apt.py: add runtime test for aptYeoh Ee Peng1
Add runtime test for apt to test that it can install deb package from remote source. [YOCTO# 11488] Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-19 08:28:14 +0000