summaryrefslogtreecommitdiff
path: root/meta/conf
AgeCommit message (Collapse)AuthorFiles
2018-03-15tcmode-default.inc: Define QEMUVERSION and softly pin itKhem Raj1
This provides ability to surgically override qemu for certain machines which are provided by external layers. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-14uninative: Add compatiblity version checkRichard Purdie1
If glibc is newer on the host than in uninative, the failure mode is pretty nasty for clusters where the sstate is shared, including the Yocto Project autobuilder. This check aborts the use of uninative in such scenarios where a newer glibc version appears and avoids corruption of sstate caches. We use ldd to check the glibc version since that is included in libc-bin (or equivalent) which locales use so it should always be present. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-12unfs3: Fix build with muslKhem Raj1
Should also fix build on new build hosts where with glibc 2.27 rpc support is dropped in favor of libtirpc Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-11yocto-uninative: Upgrade to 1.8 version with glibc 2.27Richard Purdie1
Now distros are starting to ship glibc 2.27 we need a uninatve version which contains glibc 2.27 which is in the 1.8 version. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-06tcmode-default.inc: add settings for goMatt Madison1
to allow GOVERSION to be set for using an older go toolchain. Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-06maintainers.inc: add myself as -bootconf recipe maintainerCalifornia Sullivan1
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-06layer.conf: add -bootconf recipes to SIGGEN_EXCLUDE_SAFE_RECIPE_DEPSCalifornia Sullivan1
The bootloaders depend on these to be functional in the non-deploy case, but changes in them don't require rebuilding of the packages. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-06maintainers.inc: self-assign recipes from recipes-extended/perlTim Orling1
In prior round, the perl module recipes in recipes-extended/perl were inadvertantly overlooked. Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-06maintainers: self-assign perl module maintainershipTim Orling1
Also, take over the other recipes that were just enabled for ptest: - liberror-perl - liburi-perl - libxml-parser-perl - libxml-perl - libxml-simple-perl Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-04maintainers.inc: add myself as maintainer for the new busybox-inittabDenys Dmytriyenko1
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-04layer.conf: add busybox-inittab to SIGGEN_EXCLUDERECIPES_ABISAFEDenys Dmytriyenko1
Similar to sysvinit-inittab Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-04tclibc-musl.inc: Add needed libc deps for musl for on-device SDKKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-04maintainers: Add myself for musl-utilsKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-03latencytop: remove recipeAlexander Kanavin2
Last commit and release were in 2009; website is down; it's a dead project. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-03maintainers: Change icecc-create-env maintainerJoshua Watt1
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-01glibc: Enable static PIE support when security_flags are enabledKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-01default-distrovars: don't rename locales for nativesdkRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-01glibc: Upgrade to 2.27 releaseRoss Burton1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-01sstatesig: Move hardcoded native toolsJoshua Watt1
Now that SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS supports the wildcard syntax, these exclusions no longer need to be hardcoded Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-02-24binutils: Upgrade to 2.30 releaseKhem Raj1
Additionally cherry-pick 5ffeba4a09 Revert "PowerPC PLT speculative execution barriers" b01452b1d4 [PR22764][LD][AARCH64]Allow R_AARCH64_ABS16 and R_AARCH64_ABS32 against absolution symbol or undefine symbol in shared object. a985e9b9de Import patch from mainline to remove PROVODE qualifiers around definitions of __CTOR_LIST__ and __DTOR_LIST__ in PE linker scripts. eec4607fc5 Add support for DWARF-4 line number tables. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-24maintainers: update for change to icecc-create-env recipe nameRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-24image-live.bbclass: drop support for compressed ISO imagesAlexander Kanavin1
While modern Linux kernels still support it, the userspace tools haven't been updated in over a decade. Also, squashfs provides both better performance, and better compression ratio: https://elinux.org/Squash_Fs_Comparisons Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-24pax: remove the recipeAlexander Kanavin1
The situation with pax (vs. tar and cpio) is perfectly described here: https://xkcd.com/927/ The only reason pax is still around, kind of, is because both POSIX and LSB mandate it. Outside of those documents, it's not used by anyone. Meanwhile, the upstream URI we've been taking it from went down, and rather than seek an alternative source, I just went ahead and removed the recipe. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-20documentation.conf: Remove references to tasks which were removedRichard Purdie1
The fetchall and checkuriall tasks were removed, remove the doc strings for them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-02-16maintainers.inc: add missing entriesAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-16maintainers.inc: change ownershipChang Rebecca Swee Fun1
Taking ownership on recipes related to boot and base setup. Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-16maintainers.inc: change ownership for bmap-tools and wic-toolsChang Rebecca Swee Fun1
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-16maintainers.inc: update ownershipAnuj Mittal1
I propose to take over gstreamer stack and x264. Remove libav entry since the recipe was removed from oe-core. Change ownership of libva* since Wei Tee is no longer working on oe-core. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-15pigz: pigz is not gzipRoss Burton1
Whilst pigz is effectively a parallel gzip, the command line arguments are not the same so pigz isn't a drop-in replacement for gzip. [ YOCTO #12139 ] [ YOCTO #12410 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-09maintainers.inc: update recipe ownershipChang Rebecca Swee Fun1
Remove recipe for sato-icon-theme that was obsolete since YP 2.2 release and change ownership for eudev recipe. Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-02-09machines: bump default linux-yocto to v4.15Bruce Ashfield2
Ensure that the qemu* machines are building the latest available kernel in master. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-09linux-libc-headers: update to v4.15Bruce Ashfield1
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-06maintainers.inc: update maintainershipYi Zhao1
Reassign some Robert Yang's recipes to Yi Zhao. Remove guile and mailx since these recipes were removed from oe-core. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-06security_flags.inc, xorg-driver-common.inc: Move SECURITY_X_LDFLAGS logicTom Rini1
We need to ensure that all xorg modules are linked with SECURITY_X_LDFLAGS to ensure that they will be able to resolve their run time dependencies. The approach of listing each driver in security_flags.inc lets less frequently used drivers be run-time broken. Move the flag logic into xorg-driver-common.inc so that all xorg modules from all layers will have the correct security flags used. Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-06bitbake.conf: Add xattr to DISTRO_FEATURES_NATIVENiko Mauno1
Commit db1f1adace58763c35774e3fdfeaac5c3ca646fd disabled 'xattr' from DISTRO_FEATURES when native packages are built, whereas for target packages it was retained. This changed eg. mtd-utils-native to build without extended attributes (capabilities) support from there on. Thus even setcap was called succesfully for a binary during pkg_postinst on build host, the capabilities did not exist on target rootfs due to now xattr-less host-side mkfs utility. Adding xattr to DISTRO_FEATURES_NATIVE restores previous behaviour, fixing the discontinuity in capability propagation to target device rootfs. Signed-off-by: Niko Mauno <niko.mauno@vaisala.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-31tcmode-default.inc: drop preferred version of gzip-nativeMartin Jansa1
* gzip was recently upgraded from 1.8 to 1.9, now all the builds show: NOTE: preferred version 1.8 of gzip-native not available (for item gzip-native) NOTE: versions of gzip-native available: 1.9 * drop the setting, because nobody is probably going to use older gzip-native than 1.4 when there is only 1.9 available in oe-core Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-30tcmode-default.inc: bump LINUXLIBCVERSION to 4.14%Martin Jansa1
* linux-libc-headers were updated without updating PREFERRED_VERSION causing following messages being shown in every single build: NOTE: preferred version 4.12% of nativesdk-linux-libc-headers not available (for item nativesdk-linux-libc-headers) NOTE: versions of nativesdk-linux-libc-headers available: 4.14.13 NOTE: preferred version 4.12% of linux-libc-headers not available (for item linux-libc-headers) NOTE: versions of linux-libc-headers available: 4.14.13 NOTE: preferred version 4.12% of linux-libc-headers not available (for item linux-libc-headers-dev) NOTE: versions of linux-libc-headers available: 4.14.13 NOTE: preferred version 4.12% of nativesdk-linux-libc-headers not available (for item nativesdk-linux-libc-headers-dev) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-29bitbake.conf: Add comm to HOSTTOOLSNiko Mauno1
This mitigates following issues during u-boot do_compile() step -- otherwise, if comm is not available, they are quietly ignored: .../scripts/check-config.sh: line 33: comm: command not found .../scripts/check-config.sh: line 39: comm: command not found Since 'comm' is provided by coreutils package, adding it to HOSTTOOLS was considered a lower impact fix compared to adding coreutils-native buildtime dependency to u-boot recipe. Signed-off-by: Niko Mauno <niko.mauno@vaisala.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-29meta: don't use deprecated functions from utils.bbclassRoss Burton3
These functions were moved to meta/lib/oe in 2010 and the base_* functions in utils.bbclass were intended to be a short-term compatibility layer. They're still used in a few places, so update the callers to use the new functions. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-29bitbake.conf: add STAMPS_DIR to BB_HASHBASE_WHITELISTMing Liu1
This allows scripts/bitbake-whatchanged to calculate the dependency changes correctly since it needs to set different STAMPS_DIR during the comparation. Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-18maintainers: updateRoss Burton1
Some people are no longer working on oe-core, so reassign their packages. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-18tune-i686: Add new tune for better support of 686-class CPUs.Carlos Alberto Lopez Perez2
There isn't currently any tune available for i686 x86 optimizations. The tune for i586 doesn't enable i686 specific optimizations, and the one for core2 enables things that won't work on a i686 CPU (like SSE3). Make the tune for core2 inherits from this one and move there the setting of X86ARCH32. Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06maintainers.inc: add missing entries for gst-validate, gst-examples and mesonAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06bitbake.conf: Set AUTOREV to have a vardepvalueRichard Purdie1
If you have a recipe which does not include SRCPV in PV but does set SRCREV = "${AUTOREV}" and you run do_fetch, then change the repo to a new commit then run do_unpack, do_unpack will fail since the new commit doesn't exist in the repo that was fetched. The problem is the revision chosen is not represented in the do_fetch task hash. It if were, the fetch would rerun first and the commit would be present. It works when PV includes SRCPV since that does contain the chosen commit from the AUTOREV. The solution is to include the SRCPV value into the representation of AUTOREV used for checksum calculation purposes. Add a selftest for this issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06local.conf.sample: Weakly set BB_DISKMON_DIRSRichard Purdie1
For various reasons we need to be able to set and override this from auto.conf on our test infrastructure. We have tried forcing the variable but this then breaks other selftests. In the interests of not complicating things further and needing to modify the tests across releases, weaken the default assignment. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-05maintainers.inc: assign python recipes to Derek StrakaAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-05maintainers.inc: remove python recipes no longer provided in oe-coreAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-02maintainers.inc: remove stat recipeYi Zhao1
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-02machine/include/qemu.inc: update RDEPENDS to match kernel namingRoss Burton1
The kernel class now sets RDEPENDS_${KERNEL_PACKAGE_NAME}-base so this include needs to do the same, otherwise bitbake emits a warning and the kernel isn't removed. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-02kernel: Add support for multiple kernel packagesHaris Okanovic1
Some distros may want to provide alternate kernel "flavors" via feeds or within bootable images. For example, readily available builds which provide certain diagnostic features can enable developers and testers to more quickly resolve issues by avoiding lengthy kernel builds. This change allows for building multiple flavors of the kernel and module packages by templatizing kernel package names via a new KERNEL_PACKAGE_NAME variable in kernel.bbclass. It defaults to the old name of "kernel", but can be overridden by certain recipes providing alternate kernel flavors. To maintain compatibility, recipes providing alternate kernel flavors cannot be the "preferred provider" for virtual/kernel. This is because OE puts the preferred provider's build and source at "tmp-glibc/work-shared/$MACHINE/kernel-build-artifacts/" and "tmp-glibc/work-shared/$MACHINE/kernel-source/" instead of "tmp-glibc/work/*/$PN/" like other recipes. Therefore, recipes using the default KERNEL_PACKAGE_NAME="kernel" follows the old semantics -- build in the old location and may be preferred provider -- while recipes using all other KERNEL_PACKAGE_NAME's build from the normal WORKDIR and don't provide "virtual/kernel". Testing: 1. Add `KERNEL_PACKAGE_NAME_pn-linux-yocto-tiny = "tiny-linux"` to local.conf so that linux-yocto-tiny may build alongside the main kernel (linux-yocto). 2. `bitbake linux-yocto linux-yocto-tiny` to build both kernel flavors. 3. Verified image and modules IPKs exist for both: tmp-glibc/deploy/ipk/qemux86/kernel-* for linux-yocto tmp-glibc/deploy/ipk/qemux86/tiny-linux* for linux-yocto-tiny 4. Verified linux-yocto is the "preferred provider", and was built in shared directory: tmp-glibc/work-shared/qemux86/kernel-* 5. Add `CORE_IMAGE_BASE_INSTALL_append_pn-core-image-base = "tiny-linux"` to local.conf to install both kernel flavors in core-image-base. 6. `bitbake core-image-base` to build an image. 7. Verified image contains two bzImage's under /boot/, with "yocto-standard" (linux-yocto recipe) selected to boot via symlink. Discussion threads: http://lists.openembedded.org/pipermail/openembedded-core/2015-December/thread.html#114122 http://lists.openembedded.org/pipermail/openembedded-core/2017-July/thread.html#139130 [YOCTO #11363] Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Coauthored-by: Gratian Crisan <gratian.crisan@ni.com> Coauthored-by: Haris Okanovic <haris.okanovic@ni.com> Coauthored-by: Josh Hernstrom <josh.hernstrom@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-19 06:18:10 +0000