summaryrefslogtreecommitdiff
path: root/meta/conf
AgeCommit message (Collapse)AuthorFiles
2016-10-28musl: enable gobject introspectionAlexander Kanavin1
It's working with recent versions of musl, so there's no reason to keep it disabled. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-19local.conf.sample.extended: remove RM_OLD_IMAGEJoshua Lock1
RM_OLD_IMAGE has been removed so don't include this variable in sample local.conf Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-15arch-mips.inc: remove duplicates from PACKAGE_ARCHSRobert Yang1
Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Error, the PACKAGE_ARCHS variable contains duplicates. The following archs are listed more than once: mips64-o32 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15x86-base: Update version to 4.8Saul Wold1
This update will avoid confusion with other parts of OE-Core that set the kernel version to 4.8 for qemux86* and genericx86*. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15Remove RM_OLD_IMAGE, it's no longer usefulJoshua Lock1
Since the move to put image deployment under sstate control in d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically removed before a new image is deployed (the default behaviour of the sstate logic). RM_OLD_IMAGE is therefore no longer required to provide this behaviour, remove the variable and its users. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-07security_flags: Diable PIE for mesa-glKhem Raj1
This creeped in along with rest of the changes in c999b3d88dfcffbe0fb66406fb0bff1fb66f34bc even after it was reported a build failure in mesa-gl This is also showing up on arm architecture now | /usr/src/debug/glibc/2.24-r0/git/csu/elf-init.c:87: undefined reference to `__init_array_end' | /usr/src/debug/glibc/2.24-r0/git/csu/elf-init.c:87: undefined reference to `__init_array_start' | /a/builder/mnt/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: .libs/mesa_dri_drivers.so: hidden symbol `__init_array_end' isn't defined Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-07arch-mips: Add mipsisa{32, 64}r6{el, } tunesZubair Lutfullah Kakakhel4
Add support for MIPS Release 6 ISA and the various tune configurations. This patch adds the tunes for 32r6 and 64r6 n64 and not the n32 variants at the moment. Release 6 onwards, the tuples are now - mipsisa32r6-linux-gnu - mipsisa32r6el-linux-gnu - mipsisa64r6-linux-gnuabi64 - mipsisa64r6el-linux-gnuabi64 - mipsisa64r6-linux-gnuabin32 - mipsisa64r6el-linux-gnuabin32 For more details, check https://wiki.debian.org/Multiarch/Tuples Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-07bitbake.conf: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel1
Add support for MIPS Release 6 ISA Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-06uninative: users can override download sitebavery1
The default download site for the uninative tarball is http://downloads.yoctoproject.org/releases/uninative/<version>. There are scenarios in which the user may need to force the download to be somewhere else. This patch allows the UNINATIVE_URL to be set in the local.conf. Signed-off-by: bavery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-05sanity: Update minimum version requirement to 1.31.2Richard Purdie1
This is so we can depend on the bb event threading fix which prevents event pipe corruption. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-01machine-sdk: Clear ABIEXTENSION to avoid sstate checksum mismatch issuesRichard Purdie3
When switching MACHINE, nativeksdk recipes could end up being rebuilt. Clear ABIEXTENSION to avoid this problem and ensure sstate checksum consistency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30multilib.conf: Ensure sstate checksums don't change when using this includeRichard Purdie1
When enabling multilib.conf, the world was rebuilding due to changes in the pkg-config search path. This doesn't matter so exclude it from the checksums. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28SDK: Allow changing SDKMACHINE without wiping TMP folderJuro Bystricky1
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder. Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS result in conflicts. Eventually we hit the error: ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist. The build has stopped as continuing in this scenario WILL break things This patchset addresses the problem by SDK_SYS as the recipe name suffix instead of SDK_ARCH. [YOCTO #9281] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-27machine/qemu*: Add comment regarding the reason for virtio-rng-pciNathan Rossi5
Bring across the comment that was in runqemu regarding why the virtio-rng-pci device was needed. This comment is added to each location where the virtio-rng-pci device is added. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-26uninative: Upgrade to 1.4Richard Purdie1
This adds the new version of patchelf which resolves issues some users were seeing with older versions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23arch-mips: Add mips64-o32 tunesZubair Lutfullah Kakakhel1
Add mips64 + o32 rootfs abi tune configurations Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23tune-ppc[65]00.inc: Disable QEMU usermode usageOtavio Salvador2
The QEMU usermode fails with invalid instruction error when used with those tunes. The issue is being tracked in [YOCTO: #10304]. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23arch-mips: Add mips64r2 tunesZubair Lutfullah Kakakhel1
Add MIPS64r2 optimizations Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23bitbake.conf: add eudev's udevdir to FILES_${PN}Robert Yang1
* The eudev's udevdir can be ${base_libdir}/udev or ${libdir}/udev, it doesn't have to be hardcoded to /lib/udev, so add them FILES_${PN}. * Use /lib/udev rather than /lib/udev/rules.d for FILES_${PN} since there might be files in /lib/udev except subdir rules.d Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-09-23runqemu: Move virtio RNG to machine configurationNathan Rossi5
Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-23bitbake.conf: add a lazy default for SDKMACHINERoss Burton1
If the user doesn't set SDKMACHINE in their local.conf then uninative and buildtools will fail in obscure ways, so ensure that a default value is set. Also as SDK_ARCH will be overritten then loading the machine-sdk configuration file, don't bother assigning it. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-20default-distrovars.inc: remove libidn from LGPLv2_WHITELIST_GPL-3.0Jackie Huang1
The libidn recipe is now buildable in distros which blacklist GPL-3.0 without needing to be explicitly whitelisted (since it provides at least one non GPLv3 package). Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-19qemuppc.conf: adjust kernel consoleRobert Yang1
Fixed kernel trace when booting: [ 12.825809] random: crng init done [ 13.918323] irq 36: nobody cared (try booting with the "irqpoll" option) [ 13.924821] CPU: 0 PID: 335 Comm: getty Not tainted 4.8.0-rc5-yocto-standard #1 [ 13.930492] Call Trace: [ 13.936214] [cff73f20] [c00790f0] __report_bad_irq.isra.0+0x3c/0x128 (unreliable) [ 13.941908] [cff73f40] [c0079518] note_interrupt+0x2b8/0x304 [ 13.947265] [cff73f70] [c00766f4] handle_irq_event_percpu+0x5c/0x74 [ 13.952503] [cff73f90] [c0076768] handle_irq_event+0x5c/0xdc [ 13.957667] [cff73fa0] [c007a29c] handle_fasteoi_irq+0xdc/0x234 [ 13.962984] [cff73fc0] [c007592c] generic_handle_irq+0x3c/0x58 [ 13.968288] [cff73fd0] [c0006c74] __do_irq+0x54/0x18c [ 13.973612] [cff73ff0] [c000f9c8] call_do_irq+0x24/0x3c [ 13.978742] [cf0cdb70] [c0006e40] do_IRQ+0x94/0x110 [ 13.983992] [cf0cdba0] [c001215c] ret_from_except+0x0/0x14 [ 13.989281] --- interrupt: 501 at pmz_set_termios+0x130/0x6d8 [ 13.989281] LR = pmz_set_termios+0xf0/0x6d8 [ 13.999353] [cf0cdc90] [c049f130] uart_change_speed.isra.2+0x60/0x168 [ 14.004436] [cf0cdcb0] [c049fdbc] uart_startup.part.8+0xec/0x1e0 [ 14.009625] [cf0cdce0] [c04a0ab4] uart_open+0x138/0x16c [ 14.014723] [cf0cdd00] [c047e510] tty_open+0x118/0x65c [ 14.019743] [cf0cdd60] [c01894c8] chrdev_open+0xdc/0x1e0 [ 14.024616] [cf0cdd90] [c01807d0] do_dentry_open+0x23c/0x358 [ 14.029418] [cf0cddc0] [c0194878] path_openat+0x58c/0x1084 [ 14.034054] [cf0cde50] [c01965b4] do_filp_open+0xbc/0x10c [ 14.038539] [cf0cdf00] [c01822fc] do_sys_open+0x154/0x224 [ 14.043105] [cf0cdf40] [c0011a44] ret_from_syscall+0x0/0x38 [ 14.047828] --- interrupt: c01 at 0xfeef5a0 [ 14.047828] LR = 0xfeef544 [ 14.056543] handlers: [ 14.060980] [<c04a2b10>] pmz_interrupt [ 14.065468] Disabling IRQ #36 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-16qemuboot-x86: Add task_timeout = -1 to uvesafbSaul Wold1
This causes the default timeout to be set to infinity, it will still report out every 5000 milliseconds Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-13bitbake.conf: Add BBSERVER to HASHBASE_WHITELISTEd Bartosh1
Using BBSERVER variable in checksum calculations causes unnecessary rebuilds when running memres bitbake. Whitelisted BBSERVER variable to prevent this unwanted behaviour. [YOCTO #10201] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-09distro-alias.inc: rename gtk-doc-stub to gtk-docAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09source-highlight: add a recipeAlexander Kanavin1
gtk-doc relies on this to highlight source code snippets Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09runqemu: Allow unique network interface MAC addressesRichard Purdie2
Current qemu instances all share the same MAC address. This shouldn't be an issue as they are all on separate network interfaces, however on the slight chance this is causing problems, its easy enough to ensure we use unique MAC addresses based on the IP numbers we assign. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemu.inc: inherit qemuboot.bbclassRobert Yang1
All qemu boards should be able to boot by runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc: Use virtio networking instead of pcnetRichard Purdie1
qemuppc can use virtio networking and we may as well do so for better prformance as we do under the other emulated hardware. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc.conf: set vars for runqemuRobert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemumips/qemumips64.conf: set vars for runqemuRobert Yang3
Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps which can be boot by runqemu can require qemuboot-mips.inc Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemux86.conf/qemux86-64.conf: set vars for runqemuRobert Yang3
Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps which can be boot by runqemu can require qemuboot-x86.inc. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm64.conf: set vars for runqemuRobert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set PREFERRED_VERSION_linux-yoctoRobert Yang1
The base_version_less_or_equal() will raise errors if PREFERRED_VERSION_linux-yocto is None. For example, when we build DISTRO = "nodistro", PREFERRED_VERSION_linux-yocto is not be defined since it is defined in poky.conf, and then bitbake will choose the higher version which is 4.8 currently, so set PREFERRED_VERSION_linux-yocto to 4.8, otherwise, runqemu can't boot it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm: Add DTB file new kernelRichard Purdie1
For kernels after 4.7, we need to ensure the DTB file for the kernel is used by runqemu. Doing this conditionally based upon the kernel verison being built seems to be the only way forward for this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set vars for runqemuRobert Yang1
These info are from old runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05libc-headers: update to v4.8Bruce Ashfield1
Updating the libc-headers to use the 4.8 kernel as the default. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03arch-mips.inc: Disable QEMU usermode usage when building with n32 ABIAlexander Kanavin1
QEMU usermode doesn't support n32 binaries, erroring with "Invalid ELF image for this architecture". Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-25layer.conf: remove pointercalMaxin B. John1
remove pointercal reference from layer.conf file since we moved the pointercal recipe from oe-core. Signed-off-by: Maxin B. John <maxin.john@intel.com>
2016-08-25distro_alias.inc: remove xtscal, pointercal and tslib referencesMaxin B. John1
Remove xtscal, pointercal and tslib reference from distro_alias.inc file since we moved those recipes from oe-core Signed-off-by: Maxin B. John <maxin.john@intel.com>
2016-08-23xserver-xf86-config: pre-load int10 and exa modulesKhem Raj2
musl doesn't like lazy loading that xorg uses, therefore load the needed modules explicitly [YOCTO #10169] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-20Revert "local.conf.sample: Disable ARM and PPC due to prelink test case ↵Richard Purdie1
failures" This reverts commit d3e5c1d17f80b3dd7a6d85e07b5c0c516f09ae93.
2016-08-19local.conf.sample: Disable ARM and PPC due to prelink test case failuresMark Hatle1
Internal prelink test cases reloc8 and reloc9 are failing on both ARM and PPC systems. Disable them by removing the prelink from the IMAGE_CLASSES setting. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-19Revert "local.conf.sample: Disable prelink by default"Mark Hatle1
This reverts commit 300f858ba07c938427ccd05a3d7220027a03d461. Reenable prelink Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-19gcc: Upgrade to 6.2 RC1Khem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-08-18sanity: Require bitbake 1.31.1 for multi-config changesRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-17security_flags.inc: enable PIE for a few recipesAlexander Kanavin1
They used to fail with PIE enabled, but no longer do. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-12uninative: Update to 1.3Richard Purdie1
Uninative 1.2 didn't contain the nativesdk locale fix we really needed to release and update to uninative 1.3 which does contain that fix and also uses glibc 2.24 final release. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-10world-broken: Add libunwind for musl/armKhem Raj1
gcc and libunwind race and when libunwind wins results are build fails for gcc as described this is only seen on musl/arm since on musl /usr/include is search before gcc fixed headers and unwind.h is in fixed headers. So it works ok on glibc but not on musl due to reversed search order. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 07:20:04 +0000