summaryrefslogtreecommitdiff
path: root/meta/conf
AgeCommit message (Collapse)AuthorFiles
2014-01-29unfs3: Fix dependencies and allow target buildsJason Wessel1
Fixed in this patch: * All patches marked as submitted to the upstream * Remove the pseudo dependency because unfs3 can fully stand alone or be used with pseudo and it does not link against pseudo * Dependencies to flex for nativesdk and target builds are fixed such that unfs3 can be deployed into an image * Add unfs3 references in separatebuilddir.inc because unfs3 works correctly with autotools. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28unfs3, unfs-server: Replace all instances of unfs-server with unfs3Jason Wessel1
Other recipes dependencies and even some comments need to be updated for the removal of unfs-server and the replacement with unfs3. The unfs3 is a complete drop in replacement providing all the prior functionality of NFSv2 but also adding NFSv3. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28feature-arm-thumb: Fix missing t2 suffix for armv7a MACHINEsMartin Jansa1
* unfortunatelly that note about armv7 matching also armv7a is no longer valid since armv7 include in armv7 was replaced with armv6+neon in this commit: commit 75b8adbc042e0f65fb1286bc550d02becd3b6aea Author: Khem Raj <raj.khem@gmail.com> Date: Tue Mar 27 18:37:45 2012 -0700 tune/armv7: Delete since then thumb and arm feeds had the same architecture * be aware that this will rename lots of feeds Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28qemux86_64: Use the core2-64 tuneDarren Hart1
As x86_64 has been "demoted" to an ABI definition rather than a concrete tune file, replace it with core2-64 for the qemux86-64 machine. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune: README: Typographical correctionsDarren Hart1
No new content, just correcting a few typographical errors. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune: README: Document best practiceDarren Hart1
Describe the expected usage of base architecture tune files and arch-specific files, specifically the stacking of generations. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune: README: Whitespace cleanupDarren Hart1
Before making content changes, cleanup the various whitespace errors in this file. Mostly end-of-line whitepsace. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune: Remove tune-x86_64.incDarren Hart1
The tune-x86_64.inc file is conceptually flawed. x86_64 is more akin to the x86 and x86-32 ABIs defined in arch-x86.inc than it is a concrete tune file, such as i586 or core2 - to the extent that everything but the default tune is defined in the arch-x86.inc file. This becomes very apparant when attempting to include tune-x86_64.inc in the x86 tune hierarchy. Remove the tune-x86_64.inc tune file in favor of it being an ABI definition in arch-x86.inc and relying on the linear hierarchy of concrete cpu-types in tune-i586, tune-core2, and tune-corei7. core2_64 should suffice in lieu of x86_64 for all but a couple esoteric corner cases involving older pre-core2 CPUs. In these cases, if they exist at all, the BSP can replace the include tune-x86_64.inc with arch-x86.inc and set the default tune to x86_64. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune-corei7: Add support for cpu-type corei7Darren Hart1
corei7 offers a significant advancement since the previous core2 cpu-type described in the tune-core2 file. From the GCC(1): Intel Core i7 CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1 and SSE4.2 instruction set support. This offers optimizations for Nehalem and Silvermont (e.g. Bay Trail) CPUs (and beyond). Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune: Make 32b or 64b explicit in tune name for core2Darren Hart1
Core2 has both a 32b and a 64b variant. Currently, core2 implies 32b, while core2_64 is the 64b version. This implicit 32b mode will become confusing in later architectures, such as corei7, where it would be natural for people to assume "corei7" meant 64 bit. Rather than carrying forward an implicit 32b mode and rather than changing the naming scheme part way through the architecture hiearchy, make the 32b and 64b variant explicit in the tune name by changing core2 to core2-32. This patch also standardises on using '-' in the names. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune-core2: Only add the current ARCH to PACKAGE_EXTRA_ARCHSDarren Hart1
Inherit the PACKAGE_EXTRA_ARCHS from i586 and only explicitly add core2 here. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28tune-core2: Replace -mtune=generic with -mtune=core2Darren Hart1
-march specifies which ISA to use. -mtune specifies which cpu-type to optimize instruction ordering for, but not which ISA to use. There are times when it may make sense to specify mtune=generic and use a more specific march, such as core2, but the opposite makes little sense at all: use cpu-type specific ISA, but order the instructions generically. While the -mtune is implied by -march, gcc does not verify it is using -mtune=core2 with: gcc -Q -march=core2 --help=target Explicitly specify -mtune=core2 to be sure. Add a comment header describing the CPUs targeted by this tune file. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28i586: Only add the current tune to PACKAGE_EXTRA_ARCHSDarren Hart1
The generic x86 build supports i586 by default, so this specific tune file technically doesn't add any specific ARCHes to PACKAGE_EXTRA_ARCHS. For consistency, append the current tune to PACKAGE_EXTRA_ARCHS. Since we do not have specific tune files for i386 and i486, just drop them. These could be added to tune-x86 version if there is a need to maintain them, but they really do not belong here. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28x86: Replace ia32 with x86 when referring to the generic architectureDarren Hart6
ia32 implies 32bit, while these files provide descriptions for IA32, X86_64, and X32 architectures. The term "x86" fits this used better without resorting to using the term "Intel" which isn't quite right as it excludes things like the tune-c3 file describing a Via CPU. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-27local.conf.sample: Add automatic defaults for BB_NUMBER_THREADS and ↵Richard Purdie1
PARALLEL_MAKE Its rather sad that people don't appear to read local.conf and then complain about slow builds when they're just using a single thread. Most systems have more than one core now so we might as well use a more automatic default for these values. This may lead to better experiences for new users. [YOCTO #2528] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16default-providers: Change update-alternatives provider to opkg-utilsPaul Barker1
This allows dependencies to be added to the opkg recipe without causing circular dependency loops. As opkg-utils has minimal dependencies it is the best recipe to provide update-alternatives. This partially solves Yocto Project issue 4836. More work is still needed for a complete solution. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14security_flags: db can't use pie flags from gcc for security buildSaul Wold1
[YOCTO #5721] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14separatebuilddir: Drop cmake lines since cmake class has this as default nowRichard Purdie1
The changes to cmake make this unneeded now. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14separatebuilddir: build libproxy and taglib out of the source treeRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06security_flags: add the rest of the grub-efi related packagesSaul Wold1
[YOCTO #5515] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-02bitbake.conf: add full stop to default DESCRIPTIONPaul Eggleton1
SUMMARY should not end with a full stop; however if DESCRIPTION is not set in a recipe and thus defaulted from SUMMARY, the additional DESCRIPTION values for other standard packages e.g. ${PN}-dev look a bit odd without a full stop separating the SUMMARY value and the rest of the text. Add a full stop to avoid this. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-01-02bitbake.conf: set a default for MACHINE_FEATURESPaul Eggleton1
Ensure that if MACHINE_FEATURES is not set by the machine config that we don't end up with expansion errors during parsing. Technically since the introduction of MACHINE_FEATURES_BACKFILL = "rtc" this is unlikely to be a problem unless "rtc" is also added to MACHINE_FEATURES_BACKFILL_CONSIDERED, however we should be consistent with DISTRO_FEATURES which is defaulted in bitbake.conf. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-12-20bitbake.conf: Exclude WORKDIR changes from sstate checksumsRichard Purdie1
The layout of stamp files ensures that changes to WORKDIR mean recipes get rebuilt correctly. Since WORKDIR usually contains MULTIMACH_TARGET_SYS and that depends on tune variables, including WORKDIR in sstate checksums adds a lot of noise to the system for what amounts to no gain. On the other hand, removing it reduces noise, reduces the size of the siginfo files and reduces the amount of processing bitbake has to do. It therefore seems like dropping it from the checksums is an all around win. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-20conf-notes: remove meta-toolchain-sdk referencesSaul Wold1
[YOCTO #5676] (From OE-Core rev: 4c81f743eb15604eb389f3ceafe7af7567a02e0d) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-20sanity.conf: Require bitbake 1.21.1 as a minumum version for deltask ↵Richard Purdie1
functionality Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18security_flags: more relocation issuesSaul Wold1
These are similar relocation R_X86_64_PC32 issues that are solved by removing the -pie flags. [YOCTO #5515] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18pointercal-xinput: Mark as SIGGEN_EXCLUDERECIPES_ABISAFEOtavio Salvador1
When including xinput-calibrator, in commit "xinput-calibrator: move it from meta-oe to oe-core" the pointercal-xinput has not been added to the SIGGEN_EXCLUDERECIPES_ABISAFE. This changes adds it to the meta/conf/layer.conf's file list. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-16qemu/local.conf.sample: Add sdl PACKAGECONFIGRichard Purdie1
Currently the SDL configuration option for qemu floats. This is confusing to new users and makes the build non-determinstic. This patch adds a PACKAGECONFIG option, defaulting to off and adds documentation to local.conf.sample leaving it on by default since this is the configuration our quick start assumes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-13local.conf.sample.extended: add some missed changes for directfb / archiverPaul Eggleton1
Bring some changes over from the meta-yocto version of this file that should have also been applied here but weren't. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-12external-sourcery-toolchain: removePaul Eggleton5
As per discussion on the mailing list [1], remove this largely unmaintained external toolchain support in favour of the maintained version in meta-sourcery [2]. Also correct the example and documentation.conf entries for TCMODE to match up with this change. [1] http://lists.openembedded.org/pipermail/openembedded-core/2013-December/087133.html [2] https://github.com/MentorEmbedded/meta-sourcery/ Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-10ltp: set PREFERRED_PROVIDER and rename runtests_noltp.sh scriptMartin Jansa1
* ltp installs 2 different runtests_noltp.sh files from different directories into /opt/ltp/testcases/bin/runtests_noltp.sh last one installed wins and causes unexpected changes in buildhistory's files-in-image.txt report, rename them to have unique name as other ltp scripts have. * also define PREFERRED_PROVIDER to resolve note shown when building with meta-oe layer: NOTE: multiple providers are available for ltp (ltp, ltp-ddt) NOTE: consider defining a PREFERRED_PROVIDER entry to match ltp Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-09documentation.conf: update for new image testing variablesRoss Burton1
IMAGETEST is now TEST_IMAGE, and TEST_SCEN and TEST_SERIALIZE don't exist anymore. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-05bitbake.conf/native.bbclass: Use FC instead of F77 for fortranRichard Purdie2
gcc tooling appears to be standardising around the FC variable naming. This patch changes the F77 namespace to FC instead and use the default gfortran compiler. If anyone needs the F77 variables or tools, those can still be made on a case by case basis. Also updates local.conf.sample.extended accordingly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-04security_flags: Add entry for opensslSaul Wold1
It seems we might be stumbling over an obscure linkage issues possibly similar to http://marc.info/?l=openssl-dev&m=130132183118768&w=2 This issue appears for x86-64 systems with the PIE related compiler flags. libcrypto.a(cryptlib.o): relocation R_X86_64_PC32 against symbol `OPENSSL_showfatal' can not be used when making a shared object; recompile with -fPIC The error suggests recompiling with -fPIC, but it is already compiled that way. Disable the PIE flags makes it work for now, I have posted to openssl ML [YOCTO #5515] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-29local.conf.sample: Fix typoYi Zhao1
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-22security_flags: grub-efi-natve does not build with flags enabledSaul Wold1
[YOCTO #5505] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-21ia32-base: Remove cpio and ext3 defaultsRichard Purdie1
On real IA hardware, neither the ext3 or cpio images are particularly useful or used. cpio is legacy from initramfs and that specific image now overrides FSTYPES accordingly. The size difference in filesystems makes ext3 as a file format less useful, mainly being useful in the qemu case. When needed users can still override the default FSTYPES so having saner defaults makes sense. This improves build times and uses less network bandwidth for builds and releases. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-20libjson: update to 0.11 and rename to json-cJack Mitchell1
libjson is now known as json-c. Config.status is removed as it breaks seperate build dir builds. Built without parallel make as it fails, official word is not to bother trying. Signed-off-by: Jack Mitchell <jmitchell@cbnl.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-20bitbake.conf: Remove obsolete/unused MIRROR cruftPhil Blundell1
ADOBE_MIRROR, HANDHELDS_CVS and E_SVN were broken links and not used by any recipe in oe-core. FREEDESKTOP_CVS is no longer useful because all the source code that matters is in git; no recipe in oe-core still uses the CVS repository. E_MIRROR, FREEBSD_MIRROR, FREESMARTPHONE_GIT still point to valid-seeming locations but there are no recipes in oe-core that use them. Any layers which need these variables can define them for themselves. GPE_SVN, GPE_EXTRA_SVN, GPEPHONE_MIRROR and GPEPHONE_SVN are not used by any recipe in oe-core and the corresponding projects seem to be mostly dead upstream. Again, any layers which still wish to use these variables can define them locally. All the above are just wasting space in bitbake's datastore and would be better deleted. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-20ia32-base.inc: remove eee-acpi-scripts from MACHINE_EXTRA_RRECOMMENDSPaul Eggleton1
We shouldn't bring this in unconditionally for all ia32 machines. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-14bitbake.conf: remove CPU_FEATURES defaultsPaul Eggleton1
This variable has been unused since the tune file overhaul two years ago. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14bitbake.conf: remove BOOTSTRAP_EXTRA_* variable defaultsPaul Eggleton1
These were for task-bootstrap in OE-Classic and have never been used in OE-Core. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12bitbake.conf: Default DISTRO to nodistroRichard Purdie2
An empty distro value leads to OVERRIDES and FILESOVERRIDES containing "::" entries which causes odd issues such as files being included when they shouldn't be. We could put in anonymous python to guard against empty entries but its messy and setting a default value for DISTRO to something harmless is much easier. This patch adds a weak default and ensures the sanity test doesn't complain about it. DISTRO_VERSION and SDK_VERSION are also updated to match. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-04documentation.conf: update contentsBelen Barros Pena1
This patch updates descriptions and brings more info for the variable configurations as documented in the OE-Core manual. This file is used by Toaster to display help for the configuration variables. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-18local.conf.sample.extended: Add some additional comments for security flagsSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-16bitbake.conf: add WARN_QA and ERROR_QA to the hash whitelistRoss Burton1
I discovered bitbake rebuilding packages because WARN_QA had changed. These variables don't influence the output, so add them to the whitelist. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-14separatebuilddir: remove entries for imake and xorg-cf-filesCristiana Voicu1
Imake and the associated xorg-cf-files recipes were removed. Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-14bitbake.conf: Remove double slash from PATH_prepend and PKG_CONFIG_DIRMartin Jansa1
* we correctly have ${STAGING_DIR_NATIVE}${base_sbindir_native} and then double slash in ${STAGING_DIR_NATIVE}/${base_bindir_native} * similar in PKG_CONFIG_DIR where libdir also starts with slash ${STAGING_DIR_HOST}/${libdir}/pkgconfig * also fix double slash in insane.bbclass and staging.bbclass * I was a bit nervous about staging change (in case the / was important in some weird use-case, but the extra slash is there since following commit where other extra slashes were removed only the one before libdir was kept: commit 6ea78d648951e5bbe9669412c0863daaf7f49ca5 Author: Richard Purdie <rpurdie@linux.intel.com> Date: Mon Nov 2 17:10:51 2009 +0000 autotools.bbclass: Separate out useful staging functions into base.bbclass and call from autotools classes * this isn't fixing any real-world issue AFAIK, I was just trying to debug one weird case where debugedit fails with canonicalization unexpectedly shrank by one character and it's easier to grep for '//' without many harmless instances already in run* scripts etc Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-24documentation.conf: update contentsBelen Barros Pena1
Documentation.conf is used in WebHob to display information strings about the collected variables. This patch brings the file up-to-date with latest information available from the manual. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-24qemu: don't claim support for IrDA and PCMCIARoss Burton1
QEMU machines don't have virtual IrDA or PCMCIA hardware, so don't claim to support them. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 01:28:50 +0000