summaryrefslogtreecommitdiff
path: root/meta/conf/layer.conf
AgeCommit message (Collapse)AuthorFiles
2018-04-06layer.conf: Update LAYERSERIES rocko -> sumoRichard Purdie1
Also set LAYERSERIES_COMPAT for core (we're compatible with ourself). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-06layer.conf: add -bootconf recipes to SIGGEN_EXCLUDE_SAFE_RECIPE_DEPSCalifornia Sullivan1
The bootloaders depend on these to be functional in the non-deploy case, but changes in them don't require rebuilding of the packages. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-04layer.conf: add busybox-inittab to SIGGEN_EXCLUDERECIPES_ABISAFEDenys Dmytriyenko1
Similar to sysvinit-inittab Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-01sstatesig: Move hardcoded native toolsJoshua Watt1
Now that SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS supports the wildcard syntax, these exclusions no longer need to be hardcoded Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-11-29initramfs-framework: add install moduleCalifornia Sullivan1
The non-EFI counterpart for installation was previously missing for initramfs-framework. This simply puts the normal install script in the correct location for initramfs-framework to make use of it. Partial fix for [YOCTO #12346]. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-09oprofile: remove the recipeAlexander Kanavin1
Perf is the preferred solution, and oprofile is difficult to maintain against musl. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2017-09-13meta/conf/layers.conf: Add ca-certificates as ABISAFEMark Hatle1
meta-oe was doing this before, but it was triggering a yocto-compat-script failure during the signature checking. The ca-certificates changing is ABISAFE, as the certificates themselves do not modify the compiles behavior of the applications. This should permit easier upgrades without as much rebuilding. The original value was set in meta-oe by commit ff7a4b13c4efeffc5853a93c6ff7265fa3d6c143. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-09-12initramfs-framework: bump PR and fix install-efi and setup-live modulesCalifornia Sullivan1
Bump initramfs-framework PR, as it was missed in the previous initramfs-framework patch. These modules are shell scripts so they can be allarch. Fix the SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS in layer.conf, as these dependencies moved from the main recipe to these modules. Finally, set the PR to 4 in the new module recipes to avoid breaking package feeds. Fixes [YOCTO #12024]. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-08-30initramfs-framework: Change recipe to be allarchOtavio Salvador1
There is no COMPATIBLE_HOST in the recipe neither it makes sense for this to be machine specific. Possibly, initramfs-framework's based modules may be machine specific but if there is the case they can just RDEPENDS on initramfs-framework-base and provide the specific module as another recipe. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-06-28meta/conf/layer.conf: bump layer version for LSB changesRoss Burton1
As oe-core has just dropped a number of recipes that were for LSB conformance, bump the layer version so we can also remove meta-qt4 from the autobuilder. Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-06-09meta*: Add LAYERSERIES_COMPAT and LAYERSERIES_CORENAMES markup to layer.confRichard Purdie1
This means mismatched layers are more clearly identified to the user in cases where compatibility has not been tested. This is perhaps not as needed for the core repository (other than CORENAMES) but lets lead by example. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-05-01bitbake.conf: Add HOSTTOOLS_DIR for ${TMPDIR}/hosttoolsPeter Kjellerstedt1
The path to where to install and find the tools copied from the host environment is already used in a couple of places. This warrants it to get its own variable. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-11base/bitbake.conf: Filter contents of PATH to only allow whitelisted toolsRichard Purdie1
We currently have a determinism problem in that the host tools present in PATH can influence the build. In particular, the presence of pkg-config on the build host can mask missing pkgconfig class dependencies. This adds in a new HOSTTOOLS variable and then uses it to set up a directory of symlinks to the whitelisted host tools. This directory is placed as PATH instead of the usual /usr/bin:/bin and so on. This should improve determinism of builds and avoid the issues which have been particularly obvious since the introduction of recipe specific sysroots. If users find there is a tool missing, they can extend HOSTTOOLS from a global class or global conf file. Right now the settings should be enough to build everything in OE-Core. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-02-19layer.conf: bump version for change in eSDK selftest behaviourJoshua Lock1
Since 59a99cd8 "oeqa/sdk: Updates sanity tests for minimal eSDK" we can now run oe-selftests against a minimal eSDK. We need to increase the layer version so that we can detect this change in behaviour in our automated testing. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-25layer.conf: remove pointercalMaxin B. John1
remove pointercal reference from layer.conf file since we moved the pointercal recipe from oe-core. Signed-off-by: Maxin B. John <maxin.john@intel.com>
2016-07-25layer.conf: bump version for uclibc removal and LSB updateRoss Burton1
As of oe-core layer version 9, uclibc has been removed and LSB approximates version 5 (which means that Qt 3 isn't required for LSB conformance). Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-30layer.conf: Whitelist ca-certificate dependency on opensslRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-02layer.conf: Update after replacement of udev with eudevRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-02layer.conf: Whitelist cantarell-fonts fontconfig dependencyRichard Purdie1
fontconfig is a stable API dependency and allarch fonts are desirable. This matches the other fonts. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-28adt-installer: Drop since its replaced by the extensible SDKRichard Purdie1
The extensible SDK replaces adt-installer so this can be removed now, all future effort in this direction will be placed onto that. This includes a layer version change so the autobuilder knows when to stop building adt-installer. [YOCTO #6404] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16layer.conf: Add gstreamer1.0-meta-base to SIGGEN_EXCLUDERECIPES_ABISAFERichard Purdie1
This recipe and its packages are by design like a packagegroup and can be safely depended not to change names upon despite it being machine specific. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-11meta/conf/layer.conf: adapt to more flexible initramfs-framework RDEPENDSPatrick Ohly1
initramfs-framework now RDEPENDS on ${VIRTUAL-RUNTIME_base-utils}, which can be busybox or some alternative like toybox. Making the SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS exception flexible, too, ensures that distros using toybox still pass the selftests. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07meta/conf/layer.conf: bump layer version due to Qt4 removalRoss Burton1
Qt4 has been moved to meta-qt4, so increase the layer version so that this can be detected programatically. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16layer.conf: Correct gcc-cross dependencyRichard Purdie1
The dependency listed in layer.conf is incorrect, gcc-cross DEPENDS on ${TARGET_PREFIX}libc-for-gcc, not virtual/libc. These happen to resolve the same values however they may not always both be built. The result of this was that gcc-cross gets a different task hash depending on whether virtual/libc was included in the build. Specifically "bitbake m4" and "bitbake virtual/kernel" would result in different task checksums. The fix is to use the correct dependency name. [YOCTO #8692] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-11-16meta/conf/layer.conf: fix typoPaul Eggleton1
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-01layer.conf: Add SIGGEN exclusion for oprofile kernel dependencyRichard Purdie1
The oprofile kernel dependency is a simple RRECOMMENDS, it therefore doesn't have any interface constraints and doesn't need to rebuild every time the kernel changes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01layer.conf: Improve siggen exclusion to handle virtual/libcRichard Purdie1
Now the system supports virtual/xxx in SIGGEN_ variables, convert this one to use virtual/libc instead of the hardcoded expansion which is error prone. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-31layer.conf: Add missing dependency for allarch package initramfs-frameworkRichard Purdie1
Similiarly to the other previous changes, add a missing allarch package dependency for initramfs-framework on udev. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-30layer.conf: Add several allarch dependency exclusionsRichard Purdie1
These are dependencies that our allarch packages have in OE-Core that cause those allarch packages to rebuild every time MACHINE changes. With these changes, OE-Core allarch packages all have a common sstate signatures and no longer rebuild. (From OE-Core rev: 63bff90fa4fb4a95e8c79f9f8e5dd90ae1dfc69d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-25layer.conf: Increase layer version to 6Richard Purdie1
This means we can use this as a test to enable certain autobuilder tests such as testsdk. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-03-10layer.conf: bump version as error-report interface changedRoss Burton1
The error-report tooling command-line options were changed and anyone doing automated builds and using error-reports needs to know what options to parse. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-21layer.conf: set a variable to map to the OE Layer Index namePaul Eggleton1
Add a variable that allows us to map the OE-Core layer to the name that represents it in the OpenEmbedded layer index. This will be used by bitbake-layers layerindex-fetch so that it knows that for example OE-Core is already fetched and included in the current configuration. Note - it won't be required for us to go around and set this for every layer - we can do the matching based on repo and subdirectory, but OE-Core is somewhat special in that it does sometimes appear in different places, for example in poky. [YOCTO #5348] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-03opkg-arch-config: Renamed from opkg-config-basePaul Barker1
The name 'opkg-arch-config' is much more descriptive. Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
2014-09-23layer.conf: Mark opkg-utils as ABISAFE for update-alternatives usageRichard Purdie1
Currently linux-firmware rebuilds for each machine due to its usage of update-alternatives which in turn means a dependency on opkg-utils. Marking opkg-utils as ABISAFE is the only option we have right now to avoid this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-23layer.conf: Add in useradd dependencies as ABISAFE dependenciesRichard Purdie1
Currently allarch recipes using useradd rebuild each time MACHINE changes which is not desireable. Adding the useradd dependencies to this list ensures they do not change under these circumstances. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-01conf: Account for eglibc->glibc moveKhem Raj1
Change references in documentation appropriately Signed-off-by: Khem Raj <raj.khem@gmail.com>
2014-08-11SIGGEN_EXCLUDERECIPES_ABISAFE: add initscriptsMartin Jansa1
* update-rc.d now adds initscripts dependency even to allarch recipes making them effectively TUNE_PKGARCH, "fix" it by excluding initscripts from all signatures Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30layer.conf: Add musl to safe recipes for exclusionKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-01layer.conf: Exclude gcc-cross dependencies from checksumsRichard Purdie1
gcc-cross technically depends on the C library however we can use one toolchain for multiple different tunes within a given architecture. Manually remove these dependencies so that gcc-cross isn't rebuild with every tune change. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07layer.conf: update LAYERVERSION_core for core-image-full-cmdlinePaul Eggleton1
LAYERVERSION_core change to 4 means rename of core-image-basic to core-image-full-cmdline. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18pointercal-xinput: Mark as SIGGEN_EXCLUDERECIPES_ABISAFEOtavio Salvador1
When including xinput-calibrator, in commit "xinput-calibrator: move it from meta-oe to oe-core" the pointercal-xinput has not been added to the SIGGEN_EXCLUDERECIPES_ABISAFE. This changes adds it to the meta/conf/layer.conf's file list. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-20classes/imagetest-qemu: remove old image testing classPaul Eggleton1
This has now been superseded by testimage. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-09-12layer.conf: Version bump for DEPLOY_DIR layout changeRichard Purdie1
Increase the version to signify the layout change of the images in the deploy directory. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-07-05layer.conf: Bumping LAYERVERSION_coreElizabeth Flanagan1
Bumping LAYERVERSION_core to denote where meta-toolchain* is being depreciated. This goes back to my RFC: http://comments.gmane.org/gmane.comp.handhelds.openembedded.core/39016 As we are removing meta-toolchain* and replacing it with bitbake <imagename> -c populate_sdk this causes issues with those of us who need to do automated builds both on the current development branch and on prior development branches. Example: For prior releases, I need to build meta-toolchain*. Without having a simple way to figure out where this is no longer the case, I (and other folks who run automated builds) end up having to jump through a lot of hoops trying to figure out where this layer changed. Utilizing LAYERVERSION_* to do it makes sense as there is a significant change that would cause issues for build engineers. Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-10meta-*/conf/layer.conf: tweak BBFILES commentPaul Eggleton1
"packages" was the old name (pre-2010) under which the recipe files were stored. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08layer.conf: add systemd-serialgetty to SIGGEN_EXCLUDERECIPES_ABISAFEMartin Jansa1
* it was imported from meta-systemd without SIGGEN_EXCLUDERECIPES_ABISAFE change Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-19layer.conf: avoid unnecessary early expansion with :=Christopher Larson1
bitbake handles immediate expansions of LAYERDIR for us automatically. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-06netbase: split up in netbase and init-ifupdownConstantin Musca1
- netbase should only include etc-rpc, etc-protocols, etc-services and the hosts file - the init script/configuration files should be in another package (init-ifupdown) [YOCTO #2486] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-16connman-conf: configures connman in qemu machinesCristian Iorga1
For qemu machines, connman should not configure virtual wired interfaces. Wired interfaces (eth0) are assigned static IP addresses by the virtual machine manager (qemu). This packages places the eth0 interface in a list of blacklisted interfaces, forbiding connman administering wired interfaces for qemu machines. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-26layer.conf: allow other layers to depend on this versionPaul Eggleton1
Set LAYERVERSION and rename the collection to "core". Given changes such as the tabs to spaces cleanup for python functions in the current version, this allows other layers to depend on this version of OE-Core specifically should they choose to do so, by specifying the following in their own layer.conf: LAYERDEPENDS_layername = "core:1" Where layername is whatever value is being added to BBFILE_COLLECTIONS. (This change does nothing unless a layer has LAYERDEPENDS set.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-31 10:01:58 +0000