| Age | Commit message (Collapse) | Author | Files |
|---|
|
This is done similarly to gobject-introspection, but with much
less delicate hacking around the upstream way of working.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu
will read it.
The bsp which can be boot by runqemu will inherit it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10146]
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the recent changes, executing depmod is not needed
anymore.
This simplifies and removes a lot of unnecessary code.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The information retrieved via depmod is incomplete with
regards to kernel modules that are dependencies, in
particular where two kernel modules are built from
different source trees / recipes, which leads to incomplete
dependency information for packages created.
So far, our packages created didn't contain dependencies on
packages created by other recipes, as we solely use depmod
for that, and depmod can only work well after *all* kernel
modules have been copied into one place - it doesn't work
well in a staged approach.
Now that all .ko have correct dependency information at packaging
time, we can use that information to properly track dependencies
across recipies, and can combine the information from the
.modinfo elf section with the information from depmod.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When compiling multiple external kernel modules, where one
depends on the other, there are two problems at the
moment:
1) we get compile time warnings from the kernel build
system due to missing symbols (from modpost).
2) Any modules generated are missing dependency
information (in the .modinfo elf section) for any
dependencies outside the current source tree and
outside the kernel itself.
This is expected, but the kernel build system has a way to
deal with this - the dependent module is expected to
specify KBUILD_EXTRA_SYMBOLS (as a space-separated list)
to point to any and all Module.symvers of kernel modules
that are dependencies.
While 1) by itself is not really a big issue, 2) prevents
the packaging process from generating cross-source tree
package dependencies.
As a first step to solve the missing dependencies in
packages created, we:
1) install Module.symvers of all external kernel module
builds (into a location that is automatically packaged
into the -dev package)
2) make use of KBUILD_EXTRA_SYMBOLS and pass the location
of all Module.symvers of all kernel-module-* packages
we depend on
This solves both problems mentioned above.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously merge_config.sh was wrapped by the configme script, configme
took the different KCONFIG_MODES as options, and used --allnoconfig
or --alldefconfig.
With the switch to merge_config.sh no longer being wrapped, the new
processing wasn't matching the existing values and only supported
allnoconfig or alldefconfig.
To avoid breaking existing layers, and also keep any working that
have already switched, we can make the case statement match both.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before the kernel tools were simplified and streamlined, there was code
which not only migrated a patch/cfg/scc to the kernel build tree, it
also migrated any subdirectories of those patches.
The effect of this data migration was that any other meta data in
a patch's directory structure would be available for processing.
While we don't want to do this migration anymore, it is possible to
check the path of any SRC_URI patches, and if they include a "kernel-meta"
subdirectory add it to the search path.
This restores the functionality without the old complexity.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
CMake sets all imported headers as system headers. This causes trouble for c++
projects [1].
Thanks to Jack Mitchell for pointing to the setting [2]. Build tested upon
meta-qt5-extra-world which had lots of fallout before.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70129
[2] http://lists.openembedded.org/pipermail/openembedded-core/2016-September/126067.html
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
do_kernel_configme calls merge_config.sh (installed in the sysroot by
the kern-tools-native recipe) which may invoke the compiler to complete
the configuration process.
Depending on the build (and dependencies), this may error due to sysroot poisoning [1].
The errors are similar to:
make[1]: Entering directory '4.1+gitAUTOINC+a7e53ecc27-r0/linux-x64-standard-build' HOSTCC scripts/basic/fixdep
work-shared/x64/kernel-source/scripts/basic/fixdep.c:106:23: fatal error: sys/types.h: No such file or directory
compilation terminated.
make[2]: *** [work-shared/x64/kernel-source/scripts/basic/Makefile:22: scripts/basic/x86_64-nilrt-linux-fixdep] Error 1
Adding $TOOLCHAIN_OPTIONS to $CFLAGS before calling merge_configs.sh
fixes the error because $TOOLCHAIN_OPTIONS defines the sysroot and make
uses it to correctly compile & fill all missing kernel config options.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2014-October/098253.html
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the updated kernel tools, we generate a list of sccs, patches,
configs and BSP definitions as part of the meta data generation.
It is valid if there aren't any of these artifacts found (i.e. you
are just building a branch and a default config), but invoking the
tools with no inputs isn't a good idea.
To avoid this issue, we generate a string based on the artifacts
and skip calling the tools if there's nothing to do.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fire TaskArtifact MetaData event for deployment tasks when task
either completed or skipped. Event contains full task id
(recipe+task) and list of deployment artifacts from sstate
manifest.
This should allow Toaster to always get notified about deployment
artifacts produced by the build.
[YOCTO #9869]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery
to generate manifest for deployed ext sdk artifacts and do final deployment
to SDK_DEPLOY.
This is done in a similar way to do_populate_sdk in a previous patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery
to generate manifest for deployed sdk artifacts and do final deployment
to SDK_DEPLOY.
Set stamp-extra-info flag for do_populate_sdk task. This flag is used
in the name of sstate manifest. Setting it to predetermined value for
populate_sdk task should help to get correct manifest filenames when
processing runQueueTask events.
The do_populate_sdk function is also executed by do_populate_sdk_ext
so in order to avoid conflicts with the sstate postfuncs, split
the main code into a separate function.
We also need to set SDKDEPLOYDIR as do_populate_sdk_ext expects
it in order not to break ESDK generation.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adding image_complete task should make sstate machinery
to generate manifest for deployed images and do final
deployment to DEPLOY_DIR_IMAGE.
Made sure IMGDEPLOYDIR doesn't contain images from past deployments
to prevent them to be included into sstate manifests.
Set stamp-extra-info flag for do_image_complete task. This flag
is used in the name of sstate manifest. Setting it to predetermined
value for image_complete should help to get correct manifest
filenames when processing runQueueTask events.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed deployment directory from DEPLOY_DIR_IMAGE to
SDKDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed deployment directory from DEPLOY_DIR_IMAGE to
IMGDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Renamed variable deploy_dir to deploy_dir_image in selftest code
to avoid confusion with DEPLOYDIR variable.
Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable
as it's now used as a new deployment destination.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation for changing deployment directory for image
and populate_sdk targets.
Introduced new variables, IMGDEPLOYDIR and SDKDEPLOYDIR. Set it to current
image/sdk deployment locations.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
builds
The absence of signing_key.* in $kerneldir made signing of
out-of-tree kernel modules fail (silently). Add copying of these
files during the shared_workdir task.
Signed-off-by: Mattias Waldo <mattias.waldo@saabgroup.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a similar manner to diffconfig, tell the bitbake user where the
defconfig will be saved to.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SSTATE_SKIP_CREATION variable will be used to skip creation of
sstate .tgz files. It makes sense for image creation tasks as
tarring images and keeping them in sstate would consume a lot of
disk space.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
autotools.bbclass
* recipes which don't inherit autotools or cmake bbclass and want to
use the configure options from PACKAGECONFIG need to handle
PACKAGECONFIG_CONFARGS themselves.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To complete the transition/renaming to chained image type CONVERSION
while maintaining bacwards compatibility to COMPRESS(ION), make sure also
COMPRESS_DEPENDS is checked. Without this, the dependencies for legacy
COMPRESSIONTYPES do not get built.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current style might be a leftover from when _class-target did not
exist.
Also change the assignment to SSTATECLEANFUNCS to an append, which makes
more sense. useradd.bbclass is the only user of SSTATECLEANFUNCS as of
writing, so it won't make any functional difference.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It's possible that the binary to be searched for contains whitespace which will
cause the search to fail, so strip any whitespace before looking.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Recent renaming of COMPRESSIONTYPES variable can break recipes that
still use it. Including value of COMPRESSIONTYPES variable into
CONVERSIONTYPES should prevent this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LICENSE should be a superset of all LICENSE_<pkg> values. That is,
LICENSE should contain all licenses and LICENSE_<pkg> can be used to
"filter" this on a per-package basis. LICENSE_<pkg> shouldn't contain
anything that isn't specified in LICENSE.
This patch implements simple checking of LICENSE_<pkg> values. It does
do not do advanced parsing/matching of license expressions, but,
checks that all licenses mentioned in LICENSE_<pkg> are also specified in
LICENSE. A warning is printed if problems are found.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The loop iterating over LICENSE_pn variables has never worked. In
addition, the LICENSE variable is supposed to contain all licenses
defined in LICENSE_pn variables. Thus, it is simpler just to use LICENSE
as the data we get is essentially the same.
[YOCTO #9499]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
CMake wants a relative path for CMAKE_INSTALL_*DIR, an absolute path
breaks cross-compilation. This fact is documented in the following
ticket: https://cmake.org/Bug/view.php?id=14367
$sysconfdir and $localstatedir are not relative to $prefix, so they are
still set as absolute paths. With his change ${PROJECT}Targets.cmake
that are generated by cmakes "export" function will contain relative
paths instead of absolute ones.
Signed-off-by: Thomas Witt <Thomas.Witt@bmw.de>
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Excluded removal of do_bootimg, do_bootdirectdisk and do_vmimg
timestamps to prevent unneeded rootfs rebuilds.
[YOCTO #10159]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now, useradd dollar sign requires three prepending backslash characters to
avoid unintended expansion. It used to be just one prepending backslash
character before Krogoth. Restore that behaviour.
[YOCTO #10062]
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of just removing TMPDIR from the path for display, optionally allow a
package to be passed and remove PKGDEST/package too.
This means that messages that specify a package name can pass that name and the
resulting path will be absolute inside that package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The path in startup.nsh for iso image is corrupted as follows:
fs0:\EFI\BOOT^Hootx64.efi
Using printf will emit correct path which is:
fs0:\EFI\BOOT\bootx64.efi
This happens because of echo command. Switching to printf
like the one used in efi_populate() function.
Signed-off-by: Pranav Tipnis <pranav.tipnis@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"bitbake recipe -ccleansstate" should remove binary pkgs from deploy dir
as normal cleansstate does without packagefeed-stability.bbclass.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10164]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
build_syslinux_cfg function creates syslinux configuration file.
The code assumes that the output directory exists, which is not
always the case. For example rm_work task removes rootfs directory
structure and causes build_syslinux_cfg to fail with this error:
Unable to open ../<image>-<version>/syslinux_vm.cfg
Made build_syslinux_cfg depend on output directory to ensure that
directory is created before running the function.
[YOCTO #10159]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This likely used to work when we expanded python functions and broke when
we stopped. Since it defaults to "", it never caused an issue but
is incorrect usage so fix it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the enhanced functionality, the term "compression" is no longer
accurate, because the mechanism also gets used for conversion
operations that do not actually compress data.
It is possible to remove this naming problem in a backward-compatible
manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for
the old COMPRESS_CMD/DEPENDS as fallbacks.
[YOCTO #9346]
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We've been running with a set of kern-tools that were designed to work
with build systems that knew nothing about git, trees, commits, etc.
As such, there's been a set of shims/wrappers in place to work with
within bitbake/oe-core. These were the *me scripts: createme, updateme,
patchme and configme.
With this commit, we strip that legacy code and use the tools directly.
This means less complexity, fewer corner cases .. and no surprises
when the tools are arunning. As another benefit, the tools consume
much less time during a typical build and have no noticeable impact
on the overall build time.
Existing .scc files, features, and processing are not impacted as
these tools are compatible with existing feature descriptions and
kerne configuration fragments.
The audit of kernel configuration fragments is now detached
from the linux-yocto build structure and process. This means that
they can eventually be tweaked to offer kernel audit to any type of
kernel build and configuration process.
Additionally, the kernel symbol audit phase can now resolve symbol
dependencies and offer guidance when a symbol is missing:
WARNING: linux-yocto-4.4.15+gitAUTOINC+b030d96c7b_f5e2c49d58-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
---------- CONFIG_BT_6LOWPAN -----------------
Config: CONFIG_BT_6LOWPAN
From: /home/bruce/poky/build/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/standard/features/bluetooth/bluetooth.cfg
Requested value: CONFIG_BT_6LOWPAN=y
Actual value:
Config 'BT_6LOWPAN' has the following conditionals:
BT_LE && 6LOWPAN (value: "n")
Dependency values are:
BT_LE [y] 6LOWPAN [n]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We expect that any package that uses the npm bbclass
will have a runtime dependency on node.js
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
