Age | Commit message (Collapse) | Author | Files |
|
Fixes [YOCTO 1136]
linux-yocto adds some configure steps that are necessary to prepare the source
tree after the do_patch task. This causes a "-c menuconfig" to fail in a clean
build tree. Typical use of menuconfig should be to modify the config provided
by the recipe being built. It therefor makes sense for the menuconfig task to
come after the configure task. This also happens to fix the issue seen with the
linux-yocto kernel recipe.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
We need to check if we know of the task type, before we attempt
to process it. In order to reproduce the problem build with:
PACKAGE_CLASSES = "package_ipk"
Then change it to:
PACKAGE_CLASSES = "package_rpm"
Build again -- and then try bitbake -c cleansstate <recipe>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
* libc-{common,package}.bbclass: fix shlib renaming for the C library
Without this you'd end up with eglibc_2.12.ipk instead of libc6_2.12.ipk as before
* eglibc-locale: don't make versions go backwards after split from eglibc
eglibc was way beyond PR = "r1" at the time of the split, so increase PR to make package upgrades work
[RP: Fixup PR merge conflict]
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After the recent locale changes there were warnings about many unpackaged files.
Fix this by directing libc-package.bbclass to operate directly on the files in
the sysroot and adding packaging for .debug files in this package.
Also sync up the eglibc and glibc versions of this code more closely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch eliminates the warning "not been run using the bitbake wrapper..."
when we run bitbake-layers.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
recipe
This patch will check whether the recipe is an extened recipe, if yes, some informaiton couldn't be got, so collect those information(like maintainer information or lastcheckversion) from non bbextended recipe.
Signed-off-by: Mei Lei <lei.mei@intel.com>
|
|
Currently the only way to get anything to build is to set USE_NLS="yes"
for glib-2.0. We might as well do this in the recipe by default for
now and simpllify the code.
The magic handling of USE_NLS_<recipename> is also removed since this
can be done in the form USE_NLS_pn-<recipename> using overrides these
days.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
serves no useful purpose
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
can drop this fallback code
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace the hard coded libdir for locale generating to meet the multilib
requirement.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
*libc's do_package will cost a lot of time due to the locale handing,
which may delay the other recipe's do_package task and affect the build
performance.
This commit moves locale handling into a separate recipe *libc-locale.
[RP: Add fixup with recent eglibc commit conflict for FILES_pn-dbg and PACKAGES]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The old versions of cvs and iptables may meet compile error under some architecture
- cvs 1.11.23 fails on x86-64 host and iptables 1.4.9 fails on arm host. Update them
to latest version could solve these build error.
Meanwhile, 240s timeout is set for sudoku becasue 120s is not enough to finish
compile.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
During native recipe processing we want to intercept any calls to chown
and do nothing. This prevents errors and allows the same recipes to be
used for both native and target recipes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
sstate
do_install was putting files directly into the sysroot which means sstate
had no knowledge of them. This meant they didn't get cleaned along with the
other files from the task amongst other issues.
This patch puts them in ${D} where they were supposted to be.
Tested-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were some odd instances where the PKGV could not be loaded in the old
way. Change to verify that PKGV exists before attempting to retrieve the
value from the key.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Without this, images will fail now that kernel-abiversion is back.
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
This fixes external module recipes that need $KERNEL_VERSION. It got removed by
commit a9d41062e24a6b99661b3a5256f369b557433607
Author: Darren Hart <dvhart@linux.intel.com>
Date: Tue Mar 8 17:09:10 2011 -0800
kernel/bbclass: rework kernel and module classes to allow for building out-of-tree modules
seemingly as an oversight.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
The perf component is built with the kernel, so ensure that it gets the
debug information associated with it.
Also bump the PR in the linux-yocto-* to ensure they get rebuilt.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
We clearly state now if we are:
* Skipping an empty package
* Creating a (full) package
* Creating an empty package
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Since perl-native now populates into its own dir, here we need
change accordingly.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
This is a verbatim copy of the corresponding class from oe master.
Signed-off-by: Phil Blundell <philb@gnu.org>
|
|
OVERDIDES is the key variable that needs to be set prior to data finalisation.
The other variables should be manipulated after finalisation so any
DEPENDS_prepend and _append are accounted for. This patch ensures this is
the case.
The PACKAGES maniupulations are not enabled at this time as they
don't function 100% correctly yet.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
contents of the task represent
This is particularly important since the file doens't use BBCLASSEXTEND
and PN is therefore misleading
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
handling updates
This massively cleans up the dependency handling in the two classes
when interacting with BBCLASSEXTEND.
This change has a dependency on the bitbake override handling change
and also the existence of the RecipePreFinalise event.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
variable, not the override name
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lockfiles
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instruct RPM to use the on-disk permissions, owners, groups,
and directory permissions, instead of defaulting to root:root
Code changes suggested by Mark Hatle.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
* sometimes it's usefull to remove only sstate cache and keep downloaded sources for rebuild
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
If not overridden it gets the value which is for target recipes
usually defined in machine tune files
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
To support translation, qmake based projects usually call lrelease and
lupdate however OE changes the binary names so this needs some mangle
to work out of box.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't package /etc/rpc and do_install() makes some effort to remove
that file so as to avoid the "installed but not shipped" diagnostic. But,
due to a typo in the command line, the file wasn't actually being removed
and the diagnostic continued to be issued.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
packages are configured
If all the postinsts were successfully run in offline mode, and
package-management hasn't been requested as an IMAGE_FEATURE, the opkg
metadata is now redundant and can safely be deleted.
Also, the update-rc.d and base-passwd packages can be removed since
they will serve no further purpose in this situation.
If some packages are still unconfigured at this point then we need to
keep their metadata around so that either opkg or the awk script can
configure the packages at boot time. In theory it would be possible to
strip out the data for packages that have already been configured, but
right now we just hold on to the whole status file in that situation.
Signed-off-by: Phil Blundell <philb@gnu.org>
|
|
5d7d4e1ed9bedf2b6510796d76ea8f94739b9de2
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a backport of 952e5e2b7a5c1deefc939594d40b81a71fb16a54 from oe master.
Without this the script mangling goes very wrong if ${prefix}="". There
isn't really any way to fix this in the completely general case, but
this patch does work with the two cases I tested (freetype and
gpg-error) which were unusable previously.
Signed-off-by: Phil Blundell <philb@gnu.org>
|
|
Having a generic word like "all" as an override is dangerous as this is an override
and can cause issues for function names like "sysroot_stage_all". This patch changes
it to "allarch" to help avoid this kind of problem. The field is only used in the
name of directories anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing PACKAGE_ARCH = "all" mechanism of sharing packages is problematic
with sstate since there are a variety of variables which have target specific
values and the sstate package therefore correctly changes signature depending
on the MACHINE setting.
This patch creates a new "allarch" class which sets:
PACKAGE_ARCH = "all"
(as per the existing convention)
INHIBIT_DEFAULT_DEPS = "1"
(since its not target specific and therefore can't depend on the cross
compiler or target libc)
TARGET_ARCH = "all"
TARGET_OS = "linux"
TARGET_CC_ARCH = "none"
(since these variables shouldn't change between the different packages and
target compiler flags shouldn't be getting used)
PACKAGE_EXTRA_ARCHS = ""
(since we shouldn't be depending on any architecture specific package architectures)
Not all PACKAGE_ARCH = "all" recipes can use this class since some run configure
checks on the compiler. This means they have target specific components and therefore
the "all" classification is incorrect.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Value of USE_PR_SERV is either "1" or "0" looking at
settings in bitbake.conf
USE_PR_SERV = "${@[1,0][(bb.data.getVar('PRSERV_HOST',d,1) is None) or (bb.data.getVar('PRSERV_PORT',d,1) is None)]}"
So we compare the strings
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This fixes two bugs. When populate_lic was hitting | it was going
into an infinite recursion of the node.
Also, some LICENSE fields may start with "(". We want to avoid
invalid python syntax here, so we strip out the whitespace.
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
|
|
This is a first pass at sane license parsing, using python
abstract syntax trees.
A few notes on this since ast is not generally used. I massage
the LICENSE field to be more pythonesque and then create an ast.
I then dump the ast and using a LicenseVisitor class, recurse
through the tree, looking for licenses. I then copy and link.
It's cleaner, allows for easier addition of logic and while it
takes slightly more CPU, it's also slightly faster in initial
small scale tests.
It doesn't recognize the '+' or '*' modifiers to the licenses yet
nor does it know what to do with bitors (|), since I'm not even
sure what to do with them.
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
|
|
Use PKGE/PKGV/PKGR to build various package feed in tasks of pacakge_write_xxx.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
1. Added package_get_auto_pr to PACKAGEFUNCS to get the auto
incremented value(PRAUTO) from remote PR service.
2. use PKGV/PKGR for pkgdata which will be used by package_write_xxx.
3. Added supporting functions in prserv.bbclass.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
Fixes [YOCTO 1102]
Path variables are typically : delimited. White space is allowed in paths, so
is not a good choice for separating paths. Currently utils.bbclass performs the
following:
extrapaths = (bb.data.getVar("FILESEXTRAPATHS", d, True) or "").split()
This splits FILESEXTRAPATHS on whitespace. It later splits overrides on : and
reassembles them all together as : delimited.
There is only one user of FILESEXTRAPATHS in oe-core (qt4-tools-native, which
uses : anyway) and none in oe.
Change the split() in utils.bbclass to split on : instead of whitespace. When
splitting on a defined string (":") we must be careful to handle the empty
string case which returns [''] instead of [].
Tested building qt4-tools-native and core-image-minimal for surgarbay from
meta-intel with a couple extra layers with FILESEXTRAPATHS modifications added.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* this makes fix for [YOCTO #1074] in bitbake 139b8a625818225c358a1b8363518d7ed6913188
much more usefull for people using rm_work
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
maintainer scripts could be applied offline
Signed-off-by: Phil Blundell <philb@gnu.org>
|