| Age | Commit message (Collapse) | Author | Files |
|---|
|
The manifest file can become corrupted if sstate-inputdirs and sstate-outputdirs
don't have matching endings. This patch ensures that even if set incorrectly,
the code functions as intended, thereby handling manifest corruption safely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Depending on the eglibc configuaration, the directory may or may not exist.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SDKMACHINE is not set, the toolchain will be built but the tarball
installer will not run. A better choice is to use SDK_ARCH because, even
if SDKMACHINE is not set, SDK_ARCH is set, by default, to BUILD_HOST.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnome-common is a build-only dependency so we should depend on the native
variant. This also resolves an (incorrect) GPLv3 license issue in gnome-common
at build-time.
This will also remove the pointless gnome-common-dev RRECOMMENDS in any -dev
package that uses gnomebase.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Do not allow installer to continue if the installation machine architecture
does not match the intended SDK machine architecture.
[YOCTO: #3269]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
After recent changes to terminal.bbclass, variables like PATH were no longer
preserved within the devshell. This change ensures they are inherited into
the environment of devshell and PATH for example has the correct values.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If this isn't done, various terminals fail to launch correctly
with "No such file or directory" errors. This adds back the environment
manipulation removed in the addition of "custom" terminal command
support but shouldn't regress that additional functionality
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the previous version, tar extraction use the --strip-component
option with "4" hard coded value.
If we set another SDKPATH, with a different depth, the sdk installation
fails.
This patch computes the level from the SDKPATH value.
Signed-off-by: Fabien Proriol <fabien.proriol@jdsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Present the manifest file that contains the matches for
files being installed to a location that already contains
that file. This will help to determine which is the correct
recipe to fix when this occurs.
[YOCTO #3191]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The n32 architecture is odd, in that it's a mips64 ABI which happens
to be 32-bit. To handle this, we need something in the environment
which can be used to distinguish it. The obvious place to stash this
is the ABI suffix, so we use "n32" as an ABI suffix. This allows
a couple of improved checks:
1. In insane.bbclass, we can use "linux-gnun32" to discern that it's
okay for a mips64 binary to be a 32-bit binary in some cases.
2. In multilib_header, we can check for the n32 ABI, and use a distinct
value.
3. In siteinfo, add linux-gnun32 as a synonym for linux, similar to
what's done for linux-gnux32, and tell the mips*-linux-gnun32 variants
to pick up the corresponding mips-linux site configs.
Note that the multilib header wrapper already has n32 hooks in it, there
was just nothing creating -n32 header variants.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Update the host toolchain list, for cross-canadian toolchains, to ensure
that all of the supported multilibs are built and installed. This
dynamically generates the dependnecy set based on the current multilib
configuration.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When multilibs are enabled, there will be more then one environment
file created. We need to be sure to process each environment file.
The next function can simply use the last environment file processed
to get the magic value(s) that it requires.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Crosssdk packages are not actually multilib packages, so treat them
the same as other nativesdk packages in the multilib, base, and
classextend components.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add support for the generation of cross-canadian packages.
Each cross-canadian package has:
PN = "pkg-cross-canadian-${TRANSLATED_TARGET_ARCH}"
in order for that to be evaluated properly with multilibs enabled, it was
necessary to detect both the presence of the cross-canadian packages and
then update the vars using the OVERRIDE for the multilib. Additional checks
were made to ensure that any dependency that sais "cross-canadian" did not
get prefixed with the MLPREFIX.
Also, make sure that even when building multilib cross-canadian packages,
we only use the single SDK PACKAGE_ARCH, we don't want or need variants.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
There maybe no rpm postinst script (e.g., core-image-minimal), then the
"*" is not expanded, and there would be error:
head: cannot open `rpm-postinsts/*' for reading: No such file or directory
Check whether it exists or not will fix the problem.
[YOCTO #3172]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Example config:
OE_TERMINAL = "custom"
OE_TERMINAL_CUSTOMCMD = "mysuperterm"
Signed-off-by: Morten Minde Neergaard <mneergaa@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is used by:
openembedded-core/meta/recipes-sato/matchbox-keyboard/matchbox-keyboard_git.bb
meta-openembedded/meta-oe/recipes-support/maliit/maliit-framework_git.bb
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While removing packaging data files in rootfs_ipk_do_rootfs use the
remove_packaging_data_files function. By using this function we ensure
that /var/lib/opkg directory is created. opkg needs this directory to
create lock files.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that xserver provides driver ABI names, all drivers should depend on the ABI
version that they have been built against.
All drivers that include xorg-driver-input.inc or xorg-driver-video.inc will get
these automatically, so this should only impact binary drivers.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We seem to be mostly installing modules into vendor_perl nowadays.
Make sure that the .debug data from there is captured appropriately.
Also, expand ${PERLLIBDIRS} at the point of assignment so we don't
call the python again and again.
[RP: Fixup to whitespace]
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When copying the source files needed for the -dbg package, use hardlinks
where possible. This saves some disk space and hence helps performance
of the builds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The symlink from uImage-3... to uImage is not created at image creation
time and not properly update on kernel upgrades. This is fixed by removing
the chdir. The other users of update-alternative do not change the directory
before calling it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, we'd rerun packaging for every machine since this variable contains
a machine specific component.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that PACKAGES_DYNAMIC is more standardised, starting with ^ anchors,
the variable manipulations performed by clsextend for multilib don't work.
This patch at least improves it to hack around the problem and enable
mulitlib builds to work again. If this code doesn't do the right thing, the
recipe is free to override the variable with the correct multilib case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now do_package isn't machine specific, we're only left with do_populate_sysroot as a
machine specific task. This change marks only the machine specific manifests as machine
specific, defaulting to PACKAGE_ARCH for everything else.
This means we do less work where there are multiple machines using the same
core package architecture and we can start to clean up the sstate duplicate files
whitelist.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
non-machine specific
Currently, do_package is machine specific since the shlibs data is installed
into each machine specific sysroot. This change moves the shlibs data to the
pkgdata structure, at the expense of having to iterate over a set of shlibs
directories instead of a single one.
It turns out this isn't any particular hardship for the code and as a result,
do_package stops being machine specific leading to optimisations for builds
that use a common PACKAGE_ARCH.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These variables correspond to the PACKAGE_ARCH list combined with the TARGET_VENDOR
and TARGET_OS values. These can be used to traverse the pkgdata structure.
Setting these once in base.bbclass stops pkgdata needing to recalculate the values
and is also useful for the reworked shlibs code in a patch that will follow this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* kernel-modules is always added to PACKAGES later in python code and
needed to be defined as PACKAGES_DYNAMIC
* add it to PACKAGES directly and set
ALLOW_EMPTY_kernel-modules
FILES_kernel-modules
DESCRIPTION_kernel-modules
outside populate_packages_prepend like for other packages and set only
RDEPENDS_kernel-modules from python code
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The compilation routine for the kernel has an explicit call to
build version.h, which works fine for most kernels, but the
location of it has recently changes.
commit d183e6f5 [UAPI: Move linux/version.h]
commit 10b63956 [UAPI: Plumb the UAPI Kbuilds into the user
header installation and checking]
moves the file to include/generated/linux/version.h and then to
include/generated/uapi/linux/version.h.
As a result kernel builds of 3.7 or bisection builds of intermediate
kernel commits will fail with:
make[2]: *** No rule to make target `include/linux/version.h'. Stop.
Making the explicit version.h build conditional on the version, or
via a file test would fix the problem, but it introduces some complexity
to the build.
Even without an explicit call to build version.h, it is always produced
by the kernel build, so it can simply be removed.
This extra make line was originally so that the kernel version could be
determined, so that then different instructions could be executed depending
on whether it was a 2.4 or 2.6 kernel. Since we no longer support 2.4, this
code is no longer needed.
[YOCTO: #3293]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For builds that don't use gettext, config.rpath may not exist in the target
datadir. This change uses the native directory where it will always
be present due to gettext-minimal-native (which allows us to autoreconf
recipes using gettext even if we don't have gettext built).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the link is absolute then we might end up reading from a host binary
or a nonexistent path, neither of which will produce useful results and
may result in objdump failure and python backtrace spew. If the link
does point to a binary within the installation root then we will scan the
pointed-to file at some point anyway so there is no need to do it again.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various different QA checks are based on essentially the same data from
the ELF program headers. Calling objdump to extract it repeatedly is
inefficient, particularly if the shell is involved. Instead, let's
cache the output from objdump inside the qa.elf object and allow it to
be reused by multiple tests.
Also, using objdump instead of scanelf to check for bad RPATHs (in the
same way that the useless-rpaths check was doing already) allows the
dependency on pax-utils-native to be dropped.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Otherwise it will fail if these two directories are not the same.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gettext m4 macros don't use the usual versioning/serial mechanism used by
aclocal. It therefore won't update them over and above any local version of
the macro. Equally, we don't run gettextize due to it doing slightly crazy
things to the build.
When we put the aclocal directory as a -I option to aclocal, if this was
found first compared to any recipe provided macros, the correct version
of the gettext macro would still "win". With the switch so correctly override
the system directory, older recipe provided macros may get used.
This patch manually removes the problematic m4 macros in the case we're using
gettext and need to use the correct m4 macros.
This patch also always ensures the gettext manipulations happen, even in the
-native case since missing or stale gettext files could cause build failures.
(From OE-Core rev: e9645d2bbeabaa5251d49edd659ab320fd66d0ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous steps taken to address races over the aclocal macro directory and the removal
of files hasn't been sufficient since aclocal still looks at that directory as part of its
default search path. This patch passes the aclocal-copy directory into aclocal as its system
directory, removing any chance of it accessing the original aclocal directory.
Hopefully this should therefore fix the race issues once and for all.
In order to do this, cp-noerror needs to not error if the directory already exists.
Its also been noticed that aclocal defaults to using STAGING_DATADIR_NATIVE even when
building for the target. Only using the target directory would cause errors such as
missing pkgconfig macros (since we only depend on pkgconfig-native, not pkgconfig).
This patch processes both sets of macros maintaining existing behaviour. At a future
date we could look into potentially optimsing this.
[YOCTO #3216]
(From OE-Core rev: ad29b331e0d61708e68ef772cdb19154956fa67e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The network tests in sanity.bbclass can now be trigerred explicitly
by firing the NetworkTest event. This is part of the fix for bug #3026.
[YOCTO #3026]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've noticed failures on the project autobuilders where a shared sstate
directory is used across multiple builders and the clocks become skewed.
Most of the time this causes harmless building but if this happens where
an environment is changed (make install vs make in qt4-x11-free for example),
the build can fail.
This avoids modification times in the future and should make builds safer
in shared environments sstate was designed for.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This tests for /usr/libexec as we are moving things to /lib/.
the test is ignored if the distro defaults to /usr/libexec.
Currently this test will be disabled by default since the current
value of ${libexecdir} is "/usr/libexec". Also this tests needs
to be enabled in the WARN_QA list.
[YOCTO #2915]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
method of populate_sdk_base.
If you wish to change the install/unpack method of the sdk, this can now be done by making
your own create_shar method, and setting a SDK_PACKAGING_FUNC variable to your
new create_shar function.
Signed-off-by: Thomas Kristensen <thkriste@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Since e3d7890cace71b0a57d2530bf615a58dcb46d96f or so, base.bbclass has
considered invalid LICENSE settings to be a fatal error. This means we
will never see them so there is no point checking for that.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
