summaryrefslogtreecommitdiff
path: root/meta/classes
AgeCommit message (Collapse)AuthorFiles
2014-02-28autotools-brokensep: Mark recipes with broken separate build dir supportRichard Purdie1
This patch goes through the OE-Core recipes and marks those which use autotools but don't support a separate build directory (${S} != ${B}). A new class, autotools-brokensep is used for this purpose. This doesn't introduce any change in behaviour in its own right. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-28kernel-yocto: always checkout machine branch when existing validate_branchesBruce Ashfield1
The validate_branches routine is responsible for ensuring that the specified SRCREV exists, and that the tree has been prepared for eventual patching starting directly from that SRCREV. On exit, the routine checks out the specified machine branch and the preparation is complete .. except if a KMETA branch isn't used, we exit early since the branch can't be validated. To make the exit condition consistent for all cases, we can move the KMETA validation inside a conditional and allow the same exit path for both cases. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-28uboot-config.bbclass: Skip the package if no valid configuration is foundOtavio Salvador1
The ValidError case makes parsing fail even if the U-Boot variant is not in use for the specific machine and this is not desired. So instead of raising a parsing error we skip the package. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-28base: Remove pointless createCopy/update_data callsRichard Purdie1
I was asked why we had these copy and update_data calls. I can offer no good explanation other than them perhaps once being needed for reasons long since forgotten and superceeded. With modern bitbake these should not be needed and shouldn't have been for a long time. Lets therefore remove them and simplify the code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-24sstate: Drop 'SafeDep' code from setscene validation functionRichard Purdie1
I have a feeling this code exists from the time before we had proper coverage of one sstate task by another task. At that time it was a "poor" persons version of that idea, we now have much better code internal to bitbake which handles this. Worse, this code actually breaks certain rebuild scenarios, e.g.: bitbake libtool-cross bitbake libtool-cross -c cleansstate rm tmp -rf bitbake libtool-cross would fail as binutils-cross wasn't installed from sstate. The easiest fix is to remove the obsolete/broken code. [YOCTO #5773] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-24package: Drop do_package_write taskRichard Purdie4
The reasons this task was introduced are lost in the mists of time. It allowed for the a single "package_write" task instead of spelling out the explicit package backends, however in all but one case we do that anyway. As such as might as well give in and delete the task, converting that single reference into explicit dependencies. This gives bitbake a bit less work to to when processing the runqueue since there are less tasks (but more dependencies in some cases). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-24classes/utility-tasks: make do_listtasks a little more friendlyPaul Eggleton1
* Sort the list so it's at least in some form of logical order. I looked at sorting by dependencies, but that's a topological sort, and given no such function is shipped as part of the python standard libraries it would seem excessive to pull one in just for this. In any case, I'm not sure that for the data we have this would lead to any particularly pleasing result. * Show the doc values as defined in documentation.conf (where present) as a description Addresses [YOCTO #4856]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-24classes/package_tar: fix conflicts with package_deb / package_ipkPaul Eggleton1
Avoid tar noticing that the directory is changing when do_package_write_deb or do_package_write_ipk are running at the same time as do_package_write_tar (because DEBIAN and CONTROL are being added and removed while tar is running so the directory changes). Fixes [YOCTO #5652] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-24classes/sstate: fix taints being undone on execution of sstate tasksPaul Eggleton1
The code here that deletes stamps was also deleting the taint files; so forcing an sstate task with -f would force it to execute and then because the taint file was deleted in the process, the next execution would simply restore the output from sstate again. We need to exclude the taint files just like we did in bb.build.make_stamp(). Fixes [YOCTO #5805]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-21image_types.bbclass: fix cpio IMAGE_CMD to preserve working directoryJonathan Liu1
The working directory is changed in a subshell when executing cpio to preserve the working directory for any subsequent commands. This is to keep the working directory consistent when generating multiple image types. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-20update-rc.d.bbclass: fix inhibit checkKai Kang1
In update-rc.d.bbclass it checks variable INHIBIT_UPDATERCD_BBCLASS to inhibit from inheriting this class. But it is wrong logic that when 'sysvinit' is in 'DISTRO_FEATURES', INHIBIT_UPDATERCD_BBCLASS will not be checked. Replace 'or' with 'and' to fix it. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20image-vmdk.bbclass: Don't force syslinux timeoutKyle Russell1
Don't force SYSLINUX_TIMEOUT and SYSLINUX_PROMPT if overrides have been defined elsewhere for an image configuration. Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20populate_sdk_*.bbclass: remove left over bash routinesLaurentiu Palcu2
The list_installed_packages bash routine is no longer needed here. We've got a python replacement. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20buildhistory.bbclass: fix creation of installed packages listLaurentiu Palcu1
Call the new python routines to create the packages list. [YOCTO #5831] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20image*.bbclass, bootimg.bbclass: add image type dependenciesLaurentiu Palcu4
The following dependencies were manually added in the image creation code. However, in order to have an image dependency mechanism in place, use a new variable, IMAGE_TYPEDEP, to declare that an image type depends on another being already created. The following dependencies are added by this commit: elf -> cpio.gz live -> ext3 vmdk -> ext3 iso -> ext3 hddimg -> ext3 This commit adds also another new variable: IMAGE_TYPES_MASKED. Currently, masking out certain types from IMAGE_FSTYPES was hardcoded in the image creation code. [YOCTO #5830] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20image_types: minor, inline CPIO_TOUCH_INIT()Matthieu Crapet1
Since generic compression solution has been introduced (see revision b7e4ed41ee480f00b7265341e9e2d2c2b9135143), CPIO_TOUCH_INIT() is only called by IMAGE_CMD_cpio. Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20cml1.bbclass: Add diffconfig task to cml1João Henrique Ferreira de Freitas1
diffconfig() is a new task that makes a diff between the old and new config files and writes to the fragment.cfg result file. menuconfig() always copy the original config file, so the user doesn't need to copy it. Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-20kernel-yocto: Add do_diffconfig taskJoão Henrique Ferreira de Freitas1
Instead of using 'diff' command between two kernel config files, the task diffconfig does the job creating the file $WORKDIR/fragment.cfg that user should review and use. [YOCTO #3862] Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-18image_types.bbclass: Fix tar IMAGE_CMD to not change directoriesKhem Raj1
below commit commit 9d9bca8785911e8ae06d507bbfb99d6a811f072e Author: Jonathan Liu <net147@gmail.com> Date: Mon Feb 17 21:46:28 2014 +1100 lib/oe/image.py: fix working directory The working directory needs to be changed before the image creation commands instead of afterwards. exposed an issue when generating tar images, where it would cd into rootfs and then create the rootfs tarball and remain there since the cmd to cd into deploy dir moved up the immediate following cmd like tar.bz2 or tar.gz were still looking for tarball in current directory which esentially was not deploy dir but IMAGE_ROOTFS instead Signed-off-by: Khem Raj <raj.khem@gmail.com>
2014-02-18eglibc: Upgrade from 2.18 -> 2.19Khem Raj1
License formatting and address for FSF in the COPYING and COPYING.LIB has changed. Dropped patched already upstream and patches that were workarounds for older glibc and busybox for e500 we have should pass --without-fp to eglibc/glibc 2.19 onwards the code is merged from eglibc into glibc upstream under nofpu/ pretext Signed-off-by: Khem Raj <raj.khem@gmail.com>
2014-02-17classes/populate_sdk_base: optimise task dependenciesPaul Eggleton1
We don't need to depend on do_package anymore after the split out of do_packagedata (which happened a while back in OE-Core commit 6107ee294afde395e39d084c33e8e94013c625a9). We do need dependencies on do_packagedata though since the SDK construction needs to make use of the pkgdata files. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-17classes/populate_sdk_base: fix race condition with do_rootfsPaul Eggleton1
do_rootfs has ${S} in cleandirs, and during do_populate_sdk we call exec_func() several times, which by default uses ${B} as the working directory. If do_populate_sysroot and do_rootfs race against eachother, the directory may not exist at the exact instant that the setup code for do_populate_sdk tries to cd into it. We don't actually use ${B} for do_populate_sysroot so we can set it to something else just for that task to avoid the race. NOTE: because this task name contains an underscore, the override will not work; the BitBake patch that changes these to hyphens for the task override is required for this patch to work (but won't break things without it.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-17package.bbclass: do_split_packages should always return something.Josua Mayer1
So far, when do_split_packages is passed a non-existing folder, it will return nothing. While building Mesa with PACKAGECONFIG="egl gles" for qemux86, do_package threw a nice exception on a line reading "pkgs += do_split_packages": "Exception: TypeError: 'NoneType' object is not iterable" I think a function should always return something, and in this specific case, returning an empty list should be right. This patch simply fixes the return statement to do just that. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-17classes/cpan-base: fix signatures changing when perl is in sysrootPaul Eggleton1
The previous fix for this same issue (OE-Core rev f31f6a70ec24e8c9515d69c5092e15effc5e7d4d) was not sufficient - we are setting the PERLVERSION variable from the get_perl_version function, but we're setting it using immediate expansion; thus the value is going into the signature and is still different between the time the recipe is cached on an empty TMPDIR and after perl is in the sysroot and we run bitbake -S perf. We could remove the immediate expansion, but that would mean the get_perl_version function would be called more often, so just set vardepvalue on the PERLVERSION variable to fix the problem instead. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-14image_types: sum.jffs2 is replaced by jffs2.sumDmitry Eremin-Solenikov1
Previous commit added support for sum 'compression' (rather postprocessing) of jffs2 images. Drop support for sum.jffs2 image type. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-14image_types bbclass: use compression framework for jffs2 sum imagesDmitry Eremin-Solenikov1
I got hit by a missing dependency in generation of sum.jffs2 images - at runtime, when images are generated using bitbake pool, it is possible for sum.jffs2 image to be scheduled for generation before jffs2 image is fully generated. Insted of adding additional hacks, reimplement sum.jffs2 generation as a compression scheme on top of plain jffs2 images. For now support for sum.jffs2 images is left in, it will be removed by the subsequent commit. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-14report-error.bbclass: new class to save build information when errors occurAndreea Proca1
Class is used to save data about errors after every task that failed. Errors saved as json files in ERROR_REPORT_DIR (defaults to tmp/log/error-report). To use this class one has to add INHERIT += "report-error" to local.conf. scripts/send-error-report is a simple script that sends the json file to a HTTP server that collects data (git://git.yoctoproject.org/error-report-web is a Django web interface that can be used to receive and visualize the error reports). The script will give you an URL where you can find your report. Signed-off-by: Andreea Proca <andreea.b.proca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-14package_*.bbclass: remove references to the old bash indexing routinesLaurentiu Palcu3
Package indexing is done in python and package-index.bb uses the new routines. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-13buildhistory.bbclass: create wrapper functions around ↵Laurentiu Palcu1
buildhistory_get_sdk_installed bb.build.exec_func() does not allow passing arguments to the executed scripts. Use wrappers instead. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-13kernel.bbclass, base.bbclass: Fix support for old kernel configurationOtavio Salvador2
This solves a regression introduced by OE-Core:9b75f6a (kernel: use oldnoconfig before yes '' | make oldconfig). The original oe_runmake explicitly calls 'die' command in case of failure so the fallback code never runs. The fallback code needs to handle the oe_runmake return code to call the backward compatible callback so we introduced a new command called oe_runmake_call which is used by oe_runmake. This does not change the functional behaviour of oe_runmake so it avoids any change except for the code which does need to handle the oe_runmake exit code. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-13(image|rootfs_ipk).bbclass, rootfs.py: ipk multilib fixesLaurentiu Palcu2
This commit whitelists some common directories, so the multilib sanity checks pass and also fixes an issue in lib/oe/rootfs.py when the compared files do not exist. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-12package: Remove the before do_build constraint of the do_package taskRichard Purdie1
Currently, if you bitbake xxxx, it will restore the package_write_, packagedata, populate_sysroot *and* the package data from sstate. We generally care about the packagedata and the actual packages, we no longer need/care about the do_package data itself unless something is going to repackage. By relaxing this constraint (and relying on the packagedata target), we can save things being installed from sstate and hence speedup build times. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-12meta/recipes: Remove virtclass referencesRichard Purdie3
The virtclass overrides will go away at some point (apart from the multilib one). Change them all to class-xxx instead since people enjoy copy and pasting them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11sstate: Exclude SSTATE_EXTRAPATH from checksumsRichard Purdie1
After the change to allow target recipes to depend on native recipes, the native checksums becomes all the more critical. Add to this that we're now accounting for pre/postfuncs and we have a cache reuse issue since the distro LSB string is getting coded in when it shouldn't be. This excludes that string and allows one set of native sstate to share checksums with another set from a different host distro. They're separated into different directories so this is fine for our use cases. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11classes/buildhistory: avoid buildhistory triggering rebuilds (again)Paul Eggleton1
Postfuncs are now incorporated into task signatures as of BitBake rev b84d010144de687667cf855ddcb41c9b863c236e, so we need to exclude the one we're adding to do_fetch. The change to the SSTATEPOSTINSTFUNCS variable value was also entering the signatures of do_populate_sysroot and probably other tasks, so we need to use a slightly hacky trick to avoid that as well. Apart from the final do_rootfs / do_populate_sysroot, this now means that adding and removing INHERIT += "buildhistory" will not cause tasks to be re-run. Also update the copyright date, properly this time. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11license.bbclass: Dont create a manifest when using BUILD_IMAGES_FROM_FEEDSDavid Nyström1
Wihtout this patch, FEEDS functionality is broken, and creating a manifest from recipe metadata may be faulty when using FEEDS. Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11useradd-staticids: Adjust USERADD_ERROR_DYNAMIC condition and error messageMark Hatle1
The USERADD_ERROR_DYNAMIC needs to check that both users and groups that are defined need to be represented as static ids, or an error should occur. For the user check, we want to make sure the uid is a numeric value. (The gid can be name, as the GROUPADD check will validate for a number there -- or during install useradd will fail if that group is not defined.) For the group check, we verify that the gid is specified and not left as a name. Also two statements that can be uncommented for debugging were added so that future development work on this code would be easier to do. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11useradd-staticids: Fix groupadd when --user-group is selectedMark Hatle1
When --user-group is selected (it's on by default as well) we want to translate that to a groupname and disable the --user-group. Before we just disabled --user-group, but didn't always add the group to the system. This change ensures that we add the group (as long as we have enough information to actually add the group), and we disable --user-group in that case. If a static groupid is not specified we continue to use the groupname, but via an explicit groupadd. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11package.bbclass: fix strip and split logicKoen Kooi1
Marks original commit message and variable documentation state that stripping and splitting are independent of eachother, but package.bbclass ANDs the two INHIBIT flags to see which files can be stripped and/or split. Original behaviour: INHIBIT_PACKAGE_STRIP: no strip, no debug split INHIBIT_PACAKGE_DEBUG_SPLIT: no strip, no debug split Behaviour after this patch: INHIBIT_PACKAGE_STRIP: no strip, no debug split INHIBIT_PACKAGE_DEBUG_SPLIT: strip, no split Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11conf/bitbake.conf: default HOMEPAGE to blank instead of unknownPaul Eggleton3
The default value for HOMEPAGE of "unknown" has been in place since the early OE-Classic days, but it doesn't really make sense - "unknown" is not a valid URL and it just means we have to explicitly check for this hardcoded string if we're displaying the value in some form of UI, such as Toaster. This has required some changes to the packaging classes as they previously did not expect the value to be blank. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11testimage: fail if no package manifest is foundStefan Stanacar1
Sometimes we may forget to actually build the image we want to test (when testimage task is called manually). Instead of an ugly traceback we should fail nicely. The manifest is written after the rootfs so this ensures the image was actually built. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11kernel: use oldnoconfig before yes '' | make oldconfigAlexandre Belloni1
When using a defconfig, using yes '' | make oldconfig may not result in the correct configuration being set. For example: $ ARCH=mips make qi_lb60_defconfig # # configuration written to .config # $ grep USB_ETH .config CONFIG_USB_ETH=y # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_ETH_EEM is not set $ cp arch/mips/configs/qi_lb60_defconfig .config $ yes '' | make ARCH=mips oldconfig [...] $ grep USB_ETH .config CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_ETH_EEM is not set Using make olddefconfig solves that but we'll use the oldnoconfig alias for backward compatibility with older kernels. $ cp arch/mips/configs/qi_lb60_defconfig .config $ make ARCH=mips oldnoconfig scripts/kconfig/conf --olddefconfig Kconfig # # configuration written to .config # $ grep USB_ETH .config CONFIG_USB_ETH=y # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_ETH_EEM is not set Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11kernel: stop using -exec rm for deleting filesBruce Ashfield1
Removing files from the source tree via find, exec and rm is not the most efficient operation, due to (among other things) the many forked processes. If we use -delete, it saves a significant amount of time. But -delete does not work with -prune (since it forces -depth). To maintain the lib, tools and scripts source files, we can hide them temporarily, skip their hidden directories and then finally restore them. Time for install before this change: real 2m48.563s user 0m35.220s sys 0m33.036s Time for install after this change: real 1m21.301s user 0m33.160s sys 0m28.388s We could further speed this up by using inline perl to delete the files, but that complexity is avoided for now. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-11rootfs.py, package_manager.py, sdk.py: Fix building from feeds feature for opkgLaurentiu Palcu1
When using opkg as the PM backend, one has the option to provide custom feeds to create the rootfs from. This commit: * fixes this in the refactored code; * moves the custom config creation code to python; * clean up the package-ipk.bbclass; Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11populate_sdk_rpm.bbclass: remove old shell codeHongxu Jia1
The old code no more needed since the job is done in python now. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11Cleanup rootfs_rpm,package_rpm bbclass filesHongxu Jia2
This commit cleans up the functions that were ported to python. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11image.bbclass/populate_sdk_base.bbclass: shift position of sdk complementary ↵Hongxu Jia2
install definition The sdk complementary install operation was defined in image.bbclass, but the sdk recipe (such as meta-toolchain.bb) didn't inherit this bbclass but populate_sdk, and both of image and populate_sdk bbclass inherited populate_sdk_base bbclass, so move the sdk complementary install definition to populate_sdk_base bbclass fixed this issue. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11license.bbclass: fix license_create_manifest failedHongxu Jia1
While rpm incremental image generation enabled, invoked license_create_manifest failed. ... | ln: failed to create symbolic link 'tmp/work/qemux86_ 64-poky-linux/core-image-base/1.0-r0/rootfs/usr/share/ common-licenses/alsa-conf-base/generic_GPLv2':File exists | WARNING:tmp/work/qemux86_64-poky-linux/core-image-base/ 1.0-r0/temp/run.license_create_manifest.26327:1 exit 1 from | ln -s ../${lic}/home/jiahongxu/yocto/build-20140120- yocto-qemux86-64/tmp/work/qemux86_64-poky-linux/core-image -base/1.0-r0/rootfs/usr/share/common-licenses/${pkg}/${lic} ... Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11image.bbclass/license.bbclass: ajustment list_installed_packages invokingHongxu Jia2
Since the list_installed_packages() function has refactored in python, do the necessary adjustments to license_create_manifes- t() and write_image_manifest() in license.bbclass and image.bb- class respectively; Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-02-11populate_sdk_(deb|ipk).bbclass: remove old shell codeLaurentiu Palcu2
The old code no more needed since the job is done in python now. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>