| Age | Commit message (Collapse) | Author | Files |
|---|
|
api-documentation is in DISTRO_FEATURES
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously do_populate_lic would bail writing the license files (such as the MIT
license text) to deploy/licenses/${PN}/ if there were no files listed in
LIC_FILES_CHKSUM. In general this isn't a problem since LIC_FILES_CHKSUM was
effectively a required field, and for packages which don't have traditional
content was generally set to a separate license such as
${COREBASE}/meta/COPYING.MIT.
However LIC_FILES_CHKSUM is now only required if there are sources in SRC_URI,
so oe-core b18fa5f removed these now redundant values. The unexpected side
effect of this is that that recipes that generate their content (such as
os-release) or are otherwise "interesting" (such as perf) don't have their
license files copied over, resulting in warnings from do_rootfs.
Resolve this by not returning early if LIC_FILES_CHKSUM is empty, and always
copy the references license files.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It seems that possibly due to OE-Core commit
ac59063bee0e32d0737340974f657341717a6abe, binaries produced without
uninative aren't compatible with the uninative glibc. I did try earlier
to ensure that the eSDK could work without uninative since the default
configuration in OE-Core does not enable it, but it seems like I didn't
go far enough. Given the practical considerations, just give up and
require uninative to be enabled in order to build the eSDK. I'm not
particularly happy about this, but I don't seem much of an alternative.
Fixes [YOCTO #10566].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you are using a repository which contains a .templateconf file that
sets TEMPLATECONF to point into a layer it contains, but you aren't
using that layer in your bblayers.conf, the eSDK would produce an error
during the preparation step of the installation. An example would be
using the poky repository but setting DISTRO to your own custom distro
and removing meta-poky from your bblayers.conf. The eSDK doesn't
support creating new build directories, so we don't care about the
templates and can thus force a known good value to prevent this from
happening.
Fixes [YOCTO #10568].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The class clearly intends build tools to depend upon the dummy texinfo, but it
does so using the class-cross override for cross recipes, and libtool-cross
doesn't inherit cross. Add a special case to cover this.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make it clear that SDK testing can use any valid image.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
open() is default to 'rt' which may cause decoding errors when open
binary file:
$ bitbake xcursor-transparent-theme
[snip]
Exception: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xfd in position 18: invalid start byte
[snip]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
SDK_OLDEST_KERNEL currently only controls the check on SDK installation,
however as with OLDEST_KERNEL it should be controlling the OLDEST_KERNEL
value for building glibc used in the SDK. Thus, set it in
nativesdk.bbclass. This means we need to move the default to
bitbake.conf so that it can be seen in both places.
Also set a more reasonable default for SDK_OLDEST_KERNEL for x86/x86-64 as
glibc 2.24 still supports back to 2.6.32 there and there are still
people wanting to build SDKs that will install on older distros (e.g.
CentOS 6). However it's not possible to set this with overrides since
there aren't any for the SDK_ARCH, however we can instead set the variable
from conf files in conf/machine-sdk especially as there is now a soft
default for SDKMACHINE.
Fixes [YOCTO #10561].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you used an & character in SDK_TITLE (possibly indirectly from
DISTRO_NAME) then sed interpreted this as a directive to paste in the
replaced string (@SDK_TITLE@ in this case). Escape any & characters in
SDK_TITLE to avoid that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now that out of tree building is enabled, ${B} must be used instead of
${S} as the path for UBOOT_BINARY.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Setting up the vardeps on write_qemuboot_conf forces the updating of
variables in qemuboot.conf when machine/deploy configuration changes.
This is particularly useful when developing or setting up the qemuboot
(e.g. changing QB_* variables) for new targets or when changing
deployment variables (e.g. KERNEL_IMAGETYPE).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using "npm install" instead of "cp -a" is the more correct thing to be
doing here, and ensures that symlinks for executable scripts are put
into ${prefix}/bin. (I'd prefer ${bindir}, but npm does not allow
specifying paths at that level - only a prefix.)
Fixes [YOCTO #10460].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you set LIC_FILES_CHKSUM to point to a relative symlink then you'll
get "Could not copy license file" warnings in copy_license_files() since
the symlink won't be valid after it's copied. If the source is a symlink
then we need to dereference it first.
I encountered this when I used recipetool on the sources for capnproto,
where the c++ directory contains a LICENSE.txt symlink to the LICENSE
file in the parent directory, and this symlink ends up being pointed to
in LIC_FILES_CHKSUM.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The change to get rid of FuncFailed exceptions changed the behavior
of how missing uid/gid error are be handled. Instead of catching
the exception and handling that via bb.parse.SkipPackage(), a fatal
error was called.
This won't work with recipes that are unused and therefore do not have
UID/GIDs defined. The problem triggers when parsing all recipes (e.g.,
oe-selftest runs bitbake -p).
The right way to handle this is to raise bb.parse.SkipPackage(). This
will error correctly once the recipe is needed.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This class enables 'manpages' feature in packages if 'api-documentation'
is in distro features. This ensures that manpages are always built
and installed when API documentation feature is enabled.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changed to use lz4 as lz4c seems to be deprecated.
Removed use of redirection in favor of using output file.
As Linux kernel supports only legacy format for initial ramdisk add
COMPRESS_CMD_lz4_legacy mode in case some users are using newer format.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
buildhistory was writing srcrevs.values() as SRCREV when only one
srcrev/branch exists. This returns a view of the dictionary values in python
3, and used to return a list in python 2, neither of which is an appropriate
value for SRCREV. It was resulting in latest_srcrev files like this:
# SRCREV = "346584bf6e38232be8773c24fd7dedcbd7b3d9ed"
SRCREV = "dict_values(['346584bf6e38232be8773c24fd7dedcbd7b3d9ed'])"
Which in turn would result in invalid output in buildhistory-collect-srcrevs.
Fix by calling `next(iter())` on the `.values()`
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will allow for more flexibility and overrides in BSP
layers.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are
correctly checked if the rootfs size check fails. In case of a
failure a build error is triggered.
However, there are cases where this is known to fail (e.g.,
with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS).
Because of that, check IMAGE_ROOTFS exists before trying to get the
size of it. Also, in case of any error catched as err, simply print
out a warning.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
MACHINE = "qemumips64"
DEFAULTTUNE = "mips64-o32"
$ bitbake linux-yocto
ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on
/work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch]
The mips64-n32 works since it would set ABIEXTENSION to "n32" so that
TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32"
doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend.
Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem.
Another way to fix the problem is define ABIEXTENSION to "o32" or "32"
for mips64-o32, but that may make things confused since "o32" is purely
32 bit.
[YOCTO #10305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The eSDK generation assumes that DL_DIR is downloads/ under the build directory,
and puts files such as a freshly buily uninative tarball in there expecting
bitbake will find it later.
Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in
bitbake.conf, and any instances of DL_DIR are removed from the original
local.conf, there is still the possibility that other layers could contain a
site.conf that assigns DL_DIR.
If this happens the errors are quite mysterious as it fails to find the
uninative tarball and so the hashes all change, and eSDK building fails.
Ensure that this cannot happen by explicitly assigning the DL_DIR that we
require, instead of assuming that the default value will be used.
[ YOCTO #10439 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
KERNEL_IMAGETYPE for /vmlinuz
* syslinux config hardcodes kernel image as /vmlinuz add warning message
when the selected image doesn't exist and allow to select different image
with VM_DEFAULT_KERNEL variable (qemuboot.bbclass is using QB_DEFAULT_KERNEL)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To produce certain types of images wic uses do_bootimg results
to assemble final image. For example, it copies BOOT/EFI directory
produced by do_bootimg to boot partition for every EFI image.
The tricky part of this is that do_bootimg task is not always run,
so we can't always make do_image_wic depend on do_bootimg. We only
need to do it if do_bootimg present in task graph.
Thank to Cristopher Larson for this fix.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
WARNING: attr-2.4.47-r0 do_package_write_tar: Task do_package_tar changed cwd to /path/to/attr/2.4.47-r0/packages-split/attr-locale-sv
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add "mips" and "mipsel" to "machdata" table.
Although there is a way to add entries to the "machdata" table
from a BSP without modifying the insane.bbclass directly, MIPS is
already supported in poky and as such the relevant entries should be
present in insane.bbclass.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Both "arc" and "xtensa" are valid Linux architectures, add
them into valid_archs table.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It's possible - albeit unlikely - that gdk-pixbuf isn't present in the sysroot
when a recipe inheriting this class is and the sysroot is finalised.
One example would be if the sstate archive has librsvg but not gdk-pixbuf:
librsvg will be extracted from the sstate but gdk-pixbuf will be built to "fill
in the gap". In this situation the setscene completion hook installed by
pixbufcache.bbclass will attempt to execute gdk-pixbuf-query-loaders, but that
binary hasn't been installed by gdk-pixbuf yet.
Also add gdk-pixbuf-native to DEPENDS in native builds to ensure that the
binaries we expect will be present, as it's possible to build loaders without
linking to GdkPixbuf.
[ YOCTO #10420 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the move to put image deployment under sstate control in
d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically
removed before a new image is deployed (the default behaviour of the
sstate logic).
RM_OLD_IMAGE is therefore no longer required to provide this
behaviour, remove the variable and its users.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the user modifies files such as CMakeLists.txt in the case of cmake,
we want do_configure to re-run so that those changes can take effect. In
order to accomplish that, have a variable CONFIGURE_FILES which
specifies a list of files that will be put into do_configure's checksum
(either full paths, or just filenames which will be searched for in the
entire source tree). CONFIGURE_FILES then just needs to be set
appropriately depending on what do_configure is doing; for now I've set
this for autotools and cmake which are the most common cases.
Fixes [YOCTO #7617].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to ignore the return code from the init script 'stop' command in
the preinst and prerm scriptlets. Otherwise package upgrade or
deinstallation (at least when opkg is used) is likely to fail if the
daemon is not running. That is because an init script possibly returns
'1' if you try to stop a service that is not running which, in turn,
causes the scriptlet to fail which, in turn, causes the package
(de-)installation to fail.
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'arch' QA test currently simply outputs the ELF machine field as a number
which isn't helpful. Display this as a human-readable name to make it clearer
to the user what the problem is.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The source archiver was not handling the gcc-source target correctly, since it uses the
work-shared directory, we don't want to unpack and patch it twice, just as the comments
say, but the code was not there to check for the gcc-source target.
[YOCTO #10265]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's not uncommon for qemumips[64] builds on the Yocto Project
autobuilder to fail during Sanity Tests after a very long timeout
period. This is due to the MIPS emulation in QEMU being slow and
some of the build tests taking a very long time on MIPS machines.
This patch works around this slowness by disabling the more
complex build tests for QEMU MIPS machines.
[YOCTO #10340]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check that the init script that is going to be called in the prerm()
script really exists and is executable. There might be a packaging bug
or the script might've been removed already earlier in prerm().
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class allow the extlinux.conf generation for U-Boot use.
The U-Boot support for it is given to allow the Generic Distribution
Configuration specification use by OpenEmbedded-based products.
This class can be inherited by u-boot recipes to create extlinux.conf
and boot using menu options.
U-boot with extlinux support is machine dependent, so to use this class
you need to set UBOOT_EXTLINUX to 1 in machine configuration file and
also set root= kernel cmdline UBOOT_EXTLINUX_ROOT. This variable is used
to pass root kernel cmdline, e.g:
UBOOT_EXTLINUX_ROOT = "root=/dev/mmcblk2p2"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10389]
Use a glob (*) to match all mips (not previously matched). This will ensure
that the linuxloader is properly returned for mips, mipsel, mips64,
mips64el and their n32 variants.
See: https://sourceware.org/glibc/wiki/ABIList#mips for the official list
of loaders.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA. The loader is located at a
new place for multiarch.
For more details, check https://wiki.debian.org/Multiarch
and https://sourceware.org/glibc/wiki/ABIList#mips
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS release 6 of the ISA
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If attempting to patch a git repo without a proper git config setup,
an error will occur saying user.name/user.email are needed by git
am/apply. After some code was removed from kernel-yocto, it was
simple enough to reproduce this error by creating a kernel patch and
using a container to build.
This patch abstracts out functionality that existed in buildhistory
for use in other classes. It also adds a call to this functionality
to the kernel-yocto class.
Fixes [YOCTO #10346]
introduced in OE-core revision
0f698dfd1c8bbc0d53ae7977e26685a7a3df52a3
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* otherwise there is a lot of warnings about missing close on file descriptor
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PACKAGE_EXCLUDE_COMPLEMENTARY
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The checkstatus function fires an event to notify bitbake UI about
the progress of the task, this function is implemented using ThreadPool
and is causing event lose when multiple threads tries to fire an event
(writes over socket/fd).
[YOCTO #10330]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
