| Age | Commit message (Collapse) | Author | Files |
|---|
|
When using KERNEL_MODULE_AUTOLOAD, autoload was empty, causing
"modprobe None" to get appended to the postinst script.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This behaviour matches dpkg's manpage and fixes deinstalling
alternatives for programs needed by the postrm script, e.g. /bin/sh.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to SYSTEMD_SERVICE should change the sstate checksum. To make that
happen, it needs to be listed in the list of package specific variables,
therefore add it.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The old code 'if not srcpath.find("{PN}") == -1:' looks strange, use
'if srcpath.find("{PN}") != -1:' and remove duplicated code.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Addtask lint before do_build rather than do_fetch, otherwise it would
cause all the tasks after do_fetch run again every time since
do_lint[nostamp] = "1".
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the package doesn't contain any file, then the license isn't relevant
as far as the final image is concerned. So we skip the license checking
in license_create_manifest if such case.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Both vmdk and live use syslinux, but they have different/conflicted
configurations, the main conflictions are:
vmdk live
SYSLINUX_ROOT root=/dev/sda2 root=/dev/ram0
SYSLINUX_LABELS boot boot install
INITRD No yes
So it would make the boot menu strange and vmdk can't be boot, we need
add a few extra vars to fix the problem such as SYSLINUX_ROOT_VMDK
SYSLINUX_ROOT_LIVE, but that needs a lot of changes in the code, so just
add a sanity checking for it.
[YOCTO #6889]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The linux-yocto kernel has a meta-data component which accompanies the
actual tree. That meta-data is processed to generate a series file that
controls the patching and configuration of the kernel.
patching and configuration are two distinct phases, so when working on
kernel configuration, it doesn't make sense to always have to re-run
the patching step just to update configuration data in the meta-series.
To allow a more granular set of tasks, we break the meta-data generation
into a separate task, which runs before do_patch. This allows the task
to be explicitly called when working on configuration, but otherwise
has no impact on the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
If SRC_URI contains local files (file:// references) these will almost
certainly be required at some point during the build process, so we need
to actually fetch these to ${WORKDIR} as we would normally.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without this patch the source archiver class is not allowed to
archive the same source archive for different builds.
Signed-off-by: Adrian <adrian.freihofer@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
DEBUG: Executing shell function pixbufcache_sstate_postinst
g_module_open() failed for sysroots/x86_64-linux/usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libharfbuzz.so.0: cannot open shared object file: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The kernel-abiversion is now in STAGING_KERNEL_BUILDDIR not in S.
Fixed rpm pkg like perf: (note the None version)
perf-None-r9.qemux86.rpm
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Binaries linked with gold may contain a RUNPATH instead of an RPATH.
Update chrpath.bbclass process_file_linux() to handle both cases.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
ERROR: Build of do_populate_lic failed
ERROR: Traceback (most recent call last):
File "bitbake/lib/bb/build.py", line 497, in exec_task
return _exec_task(fn, task, d, quieterr)
File "bitbake/lib/bb/build.py", line 437, in _exec_task
exec_func(func, localdata)
File "bitbake/lib/bb/build.py", line 212, in exec_func
exec_func_python(func, d, runfile, cwd=adir)
File "/home/nxadm/nx/ala-blade44.1/builds-2015-03-09-163005/qemuppc_world_oe_bp/bitbake/lib/bb/build.py", line 237, in exec_func_python
os.chdir(cwd)
OSError: [Errno 2] No such file or directory: 'bitbake_build/tmp/work/ppc7400-wrs-linux/taglib/1.9.1-r0/build'
When running setscene, the cwd is $B which maybe removed by
autotools.bbclass or cmake.bbclass when rebuild.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some people like to have the devshell start in ${B} instead of ${S}, so allow
this to be overridden.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Started to run into this error on ubuntu 15.04
ERROR: Execution of event handler 'run_buildstats' failed
Traceback (most recent call last):
File "run_buildstats(e)", line 18, in run_buildstats(e=<bb.event.BuildStarted object at 0x7f93341c1b50>)
File "buildstats.bbclass", line 17, in set_device(e=<bb.event.BuildStarted object at 0x7f93341c1b50>)
SystemError: ../Objects/longobject.c:998: bad argument to internal function
ERROR: Command execution failed: Traceback (most recent call last):
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/command.py", line 102, in runAsyncCommand
commandmethod(self.cmds_async, self, options)
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/command.py", line 303, in buildTargets
command.cooker.buildTargets(pkgs_to_build, task)
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/cooker.py", line 1336, in buildTargets
bb.event.fire(bb.event.BuildStarted(buildname, fulltargetlist), self.data)
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/event.py", line 163, in fire
fire_class_handlers(event, d)
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/event.py", line 102, in fire_class_handlers
execute_handler(name, handler, event, d)
File "/home/ubuntu/work/bleeding/openembedded-core/bitbake/lib/bb/event.py", line 76, in execute_handler
ret = handler(event)
File "run_buildstats(e)", line 18, in run_buildstats
File "buildstats.bbclass", line 17, in set_device
SystemError: ../Objects/longobject.c:998: bad argument to internal function
similar to here
http://pycuda.2962900.n2.nabble.com/bad-argument-to-internal-function-td4063274.html
If it is right fix .. Dont know
Change-Id: I84f3a4043ad5246e080dfd7e2f066e5292d4af91
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Appending to PACKAGEFUNCS results in the font packages missing the
postinst/postrm scripts and the fontconfig cache not being generated
in /var/cache/fontconfig when creating images or installing font
packages. This is because the package data has already been emitted
by emit_pkgdata in PACKAGEFUNCS. Prepend to PACKAGEFUNCS to ensure
add_fontcache_postinsts is executed before emit_pkgdata.
[YOCTO #7410]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The file ownership of the cache files in /var/cache/fontconfig needs to
be set to root:root otherwise it inherits the user and group id of the
build user.
[YOCTO #7411]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For now, if we enable 'multilib' and execute `bitbake uninative-tarball
-c populate_sdk', the command would fail, complaining nativesdk-glibc not
found in package feed.
The problem is that PKGDATA_DIR is not set correctly for nativesdk packages
when multilib is enabled.
For now, we have:
meta/conf/bitbake.conf:PKGDATA_DIR = "${STAGING_DIR_HOST}/pkgdata"
The above is overriden by the following is multilib is enabled.
meta/conf/multilib.conf:PKGDATA_DIR = "${STAGING_DIR}/${MACHINE}/pkgdata"
This is correct for normal packages. However, for nativesdk packages, this
is not correctly. This is because nativesdk.bbclass set STAGING_DIR_HOST as
follows.
meta/classes/nativesdk.bbclass:STAGING_DIR_HOST = "${STAGING_DIR}/${MULTIMACH_HOST_SYS}"
The above overrides the value in multilib.conf.
That's why we need to also set PKGDATA_DIR explicitly in nativesdk.bbclass.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #7392]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, files with absolute paths in LIC_FILES_CHKSUM such as
"file://${COMMON_LICENSE_DIR}/foo" would not result in a qa failure
when the license file changed.
To fix this problem, add any files with absolute paths from
LIC_FILES_CHKSUM to the file-checksums varflag, so that changes in the
license file are detected and cause the qa task for licenses to run.
[Yocto #6450]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new send-error-report will prompt for review of items and the server is
now specified by using the -s argument.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We don't require that a yocto custom kernel + defconfig have a full BSP
description (but of course it would be better if they did). Since this
isn't a requirement, we shouldn't alarm users by generating a BSP
description warning.
To implement this, we add a bsp audit level flag (like the one that
exists for kconfig audits), and only set it to activate in the versioned
linux-yocto recipes.
[YOCTO: #7370]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
os.walk() returns symlinks to directories in the "dirs" lists, but then never
enters them by default. As a result, the old code applied neither the
directory handling (because that is active once a directory gets entered) nor
the file handling, and thus never packaged such symlinks.
The fix is simple: find such special directory entries and move them to the
"files" list. However, one has to be careful about the undefined behavior of
modifying a list while iterating over it.
This fix was required for packaging a modified base-files that created
symlinks into /usr for /sbin /lib and /sbin.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bbclass will create an SDK with a copy of bitbake and the metadata
and sstate for the target specified for the task. The idea is to let
"system" developers both work on applications and then test adding them
to an image without having to switch between workspaces or having to
download separate items.
Rather than running bitbake directly however, the primary way of running
builds within the extensible SDK is to use the "devtool" command. The
rest of the build system is fixed via locked shared state signatures,
and thus only the recipes you have added get built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To add some flexibility to setting up the paths for the toolchain,
add some parameters. This initial use will be in order to point at
the buildsystem toolchain copied in by copy_buildsystem.py.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
other DISTRO values
If you create a build directory with poky, or set DISTRO to "poky" and
run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to
6. If you then set DISTRO to any other value where the new distro config
doesn't pull in poky's config, e.g. "nodistro", you would then get a
bblayers.conf version error which didn't immediately make sense. (The
layer versions have been out-of-step ever since meta-yocto-bsp was
split out of meta-yocto several years ago).
This is just painful and we'd rather users didn't have to deal with
it. Obviously it isn't an OE-Core problem per se, but a simple way to
resolve it for everyone is to bump OE-Core's version to 6 with an
automatic no-op upgrade. Also ensure that multiple upgrade functions
(such as the poky one) have a chance to execute by not breaking out of
the loop as we were before.
Fixes [YOCTO #6139].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add do_shared_workdir which was added recently
* Add do_fetch and do_unpack to this list, because at the moment if you
enable externalsrc through a bbappend the += in this class wipes out
the original value from externalsrc (which is set with ?=)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure there's no chance of anyone forgetting they have a recipe set
up for externalsrc; otherwise you could get confused about what is going
on. (With our default logging setup we can't make it a note because the
UI doesn't forward those; otherwise I would have used bb.note().)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Here we set SRC_URI to blank, however doing so means that the function
that is called when you expand the default value of SRCPV
(i.e. bb.fetch2.get_srcrev()) will fail, so any recipe that references
SRCPV in PV couldn't previously be used with externalsrc.
(At some point we may fix the function to work in the externalsrc case,
but then we would also need to ensure that ${B} did not change as a
result of PV changing any time the HEAD revision changes in the external
source tree, or you'll lose any intermediate build artifacts.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kernel.bbclass adds ${S} do do_clean[cleandirs], but this means if you
run bitbake -c clean <kernelrecipe> then your external source tree will
be trashed, which could be a disaster. For safety, remove ${S} from
cleandirs for every task. We also have to do the same for ${B} in the
case where EXTERNALSRC_BUILD is set to the same value as EXTERNALSRC.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 0b891265716c414ade29d587fc1a3c4ea7beadbe.
U-Boot does support AArch64, this however was only added to newer
versions of U-Boot and at the time of this original commit the U-Boot in
OE-Core did not support the 'arm64' architecture. OE-Core now has a
newer version of U-Boot for the mkimage recipe and thus supports the
'arm64' architecture.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The meta data (in tree or out of tree) that describes a BSP, its patches
and configuration is not always available when a new/default or manually
configured machine is built.
When this happens, the tools generate a skeleton BSP and use a
architecture defconfig for the build. If this is by design, the build
is typically sane and everything works fine. If an existing BSP
description was expected, chances are that the resulting kernel will not
be correct.
To avoid surprising the user when a default/skeleton BSP is used for the
build, we can make it obvious to the user by emitting a warning like
the following:
WARNING: [kernel]: An auto generated BSP description was used, this normally indicates a misconfiguration.
Check that your machine (myqemux86-64) has an associated kernel description.
[YOCTO: #3383]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After a linux-yocto style kernel is configured, a kernel configuration
audit is executed to detect common errors or issues with the config.
This output used to be visible, but was made less obvious to not alarm
users unnecessarily (since some configuration issues are acceptable).
There are some classes of configuration issue that are worth being
visible, and that is specified configuration values that do not make the
final .config. These dropped options can result in any number of runtime
failures, so flagging them at build time makes sense.
The visibility of auditing is controlled by KCONF_AUDIT_LEVEL:
0: no reporting
1: report options that are specified, but not in the final config
2: report options that are not hardware related, but set by a BSP
The default level is 1, with level 2 and above being for BSP development
only.
If these conditions are detected, warnings will be generated as follows:
WARNING: [kernel config]: specified values did not make it into the
kernel's final configuration:
Value requested for CONFIG_SND_PCSP not in final ".config"
Requested value: "CONFIG_SND_PCSP=y"
Actual value set: ""
or
WARNING: [kernel config]: BSP specified non-hw configuration:
CONFIG_BLOCK
CONFIG_CFG80211_WEXT
CONFIG_CORDIC
CONFIG_CRC8
CONFIG_EFIVAR_FS
CONFIG_EFI_PARTITION
CONFIG_NET
CONFIG_NETDEVICES
CONFIG_PARTITION_ADVANCED
CONFIG_WEXT_CORE
CONFIG_WEXT_PROC
CONFIG_WIRELESS
At this point thse are only a warnings, since there needs to be time for
layers and configuration fragments to be validated against this new
check.
[YOCTO: #6943]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Allow globs in CONFFILES.
This patch changes the way of CONFFILES handling. After this change,
the CONFFILES can take the same form as FILES. That means, we don't
have to list a bunch of files for CONFFILES. It will just be expanded
like the FILES variable.
We don't assume default value for CONFFILES in OE. But distro vendors could
provide a default value for CONFFILES in their distro configuration file
like below.
CONFFILES = "${sysconfdir}"
In this way, files under /etc are treated as configuration files by
default. Of course, setting CONFFILES in recipes take precedence over
the CONFFILES. For example, if the recipe author decides that package A
should only treat files under ${sysconfdir}/default/ as config files,
he/she can write like this.
CONFFILES_A = "${sysconfdir}/default"
[YOCTO #5200]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* add quotes around pkged_lic so that it works correctly with spaces
* fixes following error:
run.license_create_manifest.50601: 193: [: GPLv2: unexpected operator
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If /etc/login.defs is treated as a configuration file, then we would meet
errors at do_rootfs time telling us that useradd/groupadd cannot execute
correctly.
This is because the dpkg handles config file specially, the login.defs
is temporarily renamed as login.defs.dpkg-new.
How ubuntu deals the user/group adding problem? They do it at postinst of the
package. And, the postinst script of a package would possibly do `chown' of
its files or directories.
The above strategy is not suitable for OE. Because we do chown in do_install
and add user/group in preinst scripts of the packages.
That's why we need this patch so that do_rootfs don't fail.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use '-f' ('--force') option so that while removing packages using deb,
we don't fail because of the following error:
update-rc.d: $initd/$bn exists during rc.d purge (use -f to force)
Using '-f' option would make this a warning but continue to execute.
update-rc.d: $initd/$bn exists during rc.d purge (continuing)
We need this option because dpkg package backend have special handling for
configuration files. And if files under /etc/init.d are treated as configuration
files, we will have errors.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similar to commit 4569d74 for create_wrapper function, this commit fixes
hardcoded absolute build paths in create_cmdline_wrapper.
Otherwise we end up with incorrect paths in users of this function. For
example the 'file' wrapper in current released toolchain:
exec -a
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-arm/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-file/5.18-r0/image//opt/poky/1.7.1/sysroots/x86_64-pokysdk-linux/usr/bin/file
`dirname $realpath`/file.real --magic-file
/opt/poky/1.7.1/sysroots/x86_64-pokysdk-linux/usr/share/misc/magic.mgc
"$@"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a check to the SDK so that it only runs on systems with kernel versions
it supports.
[YOCTO #6856]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Defines ${BLUEZ} to be the provider of bluez services as specified by
DISTRO_FEATURES.
Example recipe fragment:
inherit bluetooth
PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)}
PACKAGECONFIG[bluez4] = "--enable-bluetooth,--disable-bluetooth,bluez4"
PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5"
[YOCTO #5031]
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The midori is built well now.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Add the new items to the validitems list, this is fully tested, initial testing
had been done with a local change that did not make the original commit request
[YOCTO #7308]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Use argparse instead of optparse for standardised help output, options
and a much cleaner code structure
* Look up pkgdata directory automatically so the user doesn't have to
specify it
* Use standard logging
NOTE: this does mean a slight change in syntax - if you do want to
specify the pkgdata directory (usually only necessary if you're calling
it from within the build process) you need to use the parameter -p (or
--pkgdata-dir) and specify this before the command, not after it.
Examples:
oe-pkgdata-util find-path /sbin/mke2fs
oe-pkgdata-util lookup-recipe libelf1
oe-pkgdata-util read-value PKGSIZE libc6
oe-pkgdata-util -p /home/user/oe/build/tmp/sysroots/qemux86-64/pkgdata read-value PKGSIZE libc6
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
[YOCTO #6804]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The qmake_base class generates internal qt.conf for build with hardcoded
qt4 target paths. This is ok for qt4-x11 as this is the default
$QT_DIR_NAME, but it is wrong for qt4-embedded, because qtopia is its
default directory.
Signed-off-by: Tomas Novotny <tomas.novotny@tbs-biometrics.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a siteinfo enabled tasks re-executes at the wrong moment whilst something else is
in do_configure, the _config files can be removed which upsets autoconf and
causes build failures.
Use the same approach as we do for dealing with the aclocal files. We already
parse the manifests so look out any *_config files and if so, copy them, then
reference the copy from siteinfo instead. This has the advantage of also being
more deterministic.
[YOCTO #7101]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Checks in FILES and pkg_* variables, solves common mistake of
using ${D} instead of $D and warns the user accordingly.
[YOCTO #6642]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
