| Age | Commit message (Collapse) | Author | Files |
|---|
|
Many GNOME packages are using their InstalledTests pattern, where the test suite
can be trivially installed. To avoid repeating the same logic over and over,
add a class to encapsulate this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A while back we fixed the cross definitions to work better in multilib
configurations, apply the same fixes to cross-candian.bbclass
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most people expect the toolchain from a multilib build to contain multilib
components. This change makes that happen and is easy for users to override
should they want something different.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LINKER_HASH_STYLE differs between MIPS and non-MIPS targets. This means
that LDFLAGS differs too. LDFLAGS is exported so it influences all task
hashes. Unfortunately this means that packages with architecture "all"
differ depending on whether they are built for a MIPS or non-MIPS target.
This causes a lot of unnecessary churn in the ipk/all directory when
switching build targets.
The simplest way to fix this is to ensure that LDFLAGS stays the same for
architecture "all" packages by clearing it. It shouldn't being used by such
packages anyway.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In 3.16+ x86-64 kernel builds produce a vdso64.so.dbg file. If this file is
copied into the kernel source install multiple QA failures are triggered.
Specifically, this file triggers a debug package split that results in
files installed but not shipped, and invalid .debug file errors.
By ensuring that .so files are not copied, we avoid this incorrect split
with no impact on future build phases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Now that we can get the task dependency tree from bitbake, we can start
to use this to strengthen our QA checks. If a dependency is added on
something which isn't in our dependency tree, that is obviously a bad
thing for example.
This patch therefore checks the RDEPENDS against the list of tasks and
ensures we do have a dependency present, if not a QA warning or error
can be issued through the usual mechanism.
The implementation is complicated by needing to resolve the RDEPENDS to
a PN using pkgdata. Its possible that can be an RPROVIDES of another
package so we need to check that too if it isn't a direct RDEPENDS.
To allow this test to work, we need to extend the do_package_qa
dependencies to include all RDEPENDS. In practise the do_package_write_*
tasks already do this so there should be no new circular dependencies or
any issues like that.
For now the issues are warnings as there are issues this finds in
OE-Core which need to be resolved and certainly will be in other layers
too. This change should simplify and assist some of Martin's dependency
scripts, the idea for this came from a discussion with Martin. It has
changed in that it doesn't just cover shlibs dependencies but checks all
dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was an error in the previous fix for the powerpc toolchain issue, this
should correct it (and simplify the code too).
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building in a TMPDIR which has setgid or setuid is a bad idea. We could try and reset
the permissions but since these can also invade into other directories like the cache
or sstate, lets tell the user to fix it instead.
[YOCTO #6519]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
where basename != module name
* new KERNEL_MODULE_AUTOLOAD syntax doesn't support modules where basename and
module name don't match (usually - and _), e.g.:
module_autoload_bq27x00_battery = "bq27x00-battery"
* sometimes it's useful to load modules in particular order and
module_autoload allowed to just list multiple modules, e.g.:
module_autoload_snd-soc-neo1973-wm8753 = "snd-soc-s3c24xx snd_soc_s3c24xx_i2s snd-soc-dfbmcs320 snd-soc-wm8753 snd-soc-neo1973-wm8753"
or
module_autoload_g_ether = "s3c2410_udc g_ether"
restore this possibility which is useful for incorrect dependencies
between modules
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added base variables and package backend specific variables to
rootfs[vardeps] in order for rootfs to rebuild when changes are made.
Set some variables as [func] to inform bitbake that they are shell
scripts, so that it invokes its shell dependency parsing. Without
marking them as functions, changes in the actual function body would
not trigger rootfs rebuilds.
[YOCTO #6502]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A series of commits had been integrated to avoid qa checking code
throwing the bitsize not matched error for x32 kernel files, the
same logic is also needed by n32 kernel which was not addressed in
that series.
This commit extends the condition for n32 kernel files.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that all licenses are canonicalised to SPDX names when processing, we need
to rename the whitelists to the match.
[RP: Fixed up multilib.bbclass too]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If INCOMPATIBLE_LICENSE=GPL-3.0 but the recipe sets LICENSE=GPLv3, the current
code won't trigger because they're different strings.
Fix this by attempting to canonicalise every license name to a SPDX name, so
both names in this example become GPL-3.0.
[ YOCTO #5622 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, /etc/timestamp is saved with minutes accuracy. To increase
the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and
read /etc/timestamp respectively with seconds accuracy.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When extracting toolchain, if the list $executable_files has filenames
with empty space character, the list will created but relocate_sdk.sh
will not handle it well. This will lead to the below erro:
./tmp/deploy/sdk/buildtools-mytools-x86_64-nativesdk-standalone-1.6.1.0.sh
Enter target directory for SDK (default: /opt/mydistro/mytoolset/1.6.1.0):
You are about to install the SDK to "/opt/mydistro/mytoolset/1.6.1.0". Proceed[Y/n]?
Extracting SDK...done
Setting it up.../opt/mydistro/mytoolset/1.6.1.0/relocate_sdk.sh: line 2: sintaxe error `token' `('
/opt/mydistro/mytoolset/1.6.1.0/relocate_sdk.sh: line 2: `e
The same occurs with replacement of ${SDKPATH} in configs/scripts/etc files.
We should ensure that full path is protected before relocate_sdk.sh
and ${SDKPATH} replacement calls.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't fix this, the fix for bug 6502 will trigger warnings
that the write_package_manifest function contains tabs.
Related to fix for [YOCTO #6502].
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This addresses warnings like:
WARNING: QA Issue: liberation-fonts rdepends on fontconfig-utils but its not a build dependency? [build-deps]
since the dependencies were being added at package time and were not
visible to bitbake.
Also take the opportunity to convert to use PACKAGEFUNCS rather than
the horrible populate_packages_append.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QA errors/warnings would show the name of the QA failure in the error/warning message.
The format is listed:
<message> [QA check name]
You can see which QA check you need to disable if you want to disable it.
[YOCTO #6160]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're relying on the packagedata being available for this task to work
correctly so lets ensure it is with the correct dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_package() calls package_name_hook so that e.g. debian-style renaming through
debian.bbclass can happen. If there is no class providing a package_name_hook
then this causes "WARNING: Function package_name_hook doesn't exist" every time
do_package() is executed.
Silence this warning by providing an empty package_name_hook in package.bbclass.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Users and children of the bootimg class may need to specify at build
time the volume ID of the HDDIMG vfat partition. An example of this
may be when at runtime the partition is uniquely identified by
the volume ID.
The HDDIMG_ID is expected to be provided externally. If the variable
is not set, mkdosfs will use the default volume-id.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Make KERNEL_IMAGE_MAXSIZE and IMAGE_ROOTFS_SIZE have the same algorithm:
- Use Kbytes as the unit since we use this in other codes.
- Use "du" rather than "ls" to figure out the size since we use this in
image.py.
[YOCTO #2610]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently, given a list of rdepends its near impossible to figure out
which ones are potentially invalid and which might be an RPROVIDES of a
package.
This problem is simple to solve, we can write lookup data into the
pkgdata. This patch does that, accounting for the fact that multiple
packages can RPROVIDE the same thing (particularly with locales). Its
done with symlinks so the performance overhead is minimal.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its possible to run the package QA checks as a separate task rather than
as part of the do_package task. This offers more parallelism but the
fact that made me propose this is that ideally we'd like to access
pkgdata to help add new tests and to do that, we need to run later in
the task list. We also need to add in RDEPENDS to the task which apply
to do_package_write_* but not do_package. See the subsequent patches
for why this is desireable.
If we split into a separate task, we need to add in calls to read
the sub package data, build the cache structure used by do_package and
cover the task with sstate (which is empty and just acts as a stamp
saying it passed package QA). We also need to handle our own
dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change the do_package shlibs code to account for RPATHS. This means that
for library dependency purposes, only libraries in system paths or in
any declared RPATH will be seen. This is important to resolve problems
people have been having where similarly named libraries in "private"
paths were conflicting, e.g. with gstreamer.
For now this code assumes the default search path is libdir and
base_libdir and places ASSUME_SHLIBS in libdir so they are searched by
default.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of having a .list file and a .ver file, place the version
information into the .list file in a ":" delimited string.
Also place the path to the library here, this can then be used to
evaluate RPATHs in the shlib dependency code.
Since the disk format has changed, the easiest way to avoid build
failures in the same TMPDIR is to change the shlibs directory to
shlibs2. sstate dependency code with ensure everything rebuilds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to do more advanced processing of the shared libraries, we need
to know where a given library is located on disk so we can know whether
its a system path or a private directory for example.
This patch adds this information into the 'sonames' data structure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve the shlibs 'needed' data structure to include the file and
any rpath information. This allows various cleanups to the data structure
and moves us closer to being able to resolve shlibs providers issues
based on path in due course.
This commit doesn't change any stored data, just cleans up internal data
structures (for example dropping the needed_from dict).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To quote "Maxin B. John" <maxin.john@enea.com>:
git version 1.7.8 added the --list option to git-branch. Since we depend on this
option in git.py, the minimum requiremnt for git should be updated to Git
1.7.8+
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To avoid syntax errors when inheriting this class without setting BINCONFIG, add
a default value and a comment.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building target packages, HOST_OS and TARGET_OS are the same, as is the
VENDOR field. However, when building an SDK this is not true. The patch
corrects the oversight and switches to using the 'HOST' version and resolves
the issue of meta-mingw not working w/ the rpm packaging.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The only reference to this function is a commented-out assignment, and nothing
in oe-core nor meta-oe uses autotools_set_crosscompiling directly. As it's
unused, remove it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we build a general toolchain script we should add all the OS
variants to PATH, not just the current one. This is because some can
cross reference each other and if the triplet prefixed ld can't be found
for example, you recieve strange errors.
Doing this resolves bugs exposed during SDK testing.
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a '\n' to the last line of the file to fix:
No newline at end of file
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a fully qualified path for the <path> parameter in calls
to update-alternatives. The chkconfig-alternatives version
requires a full path and without it, the symlink is not
properly created.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove a confusing echo after the previous commit, thanks for a suggestion
from Laurentiu.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A
|
|
Signed-off-by: Dennis Meier <meier.dennis@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* We don't want everyone to remove their identifying info, just if they
feel the need to
* Split lines for clarity
* A couple of grammar/spelling tweaks
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
GNU Patch < 2.6.1 has a race condition so we create a per-instance TMPDIR to
avoid this. This was implemented by setting os.environ[TMPDIR] but at the end
of do_patch the temporary directory is deleted but TMPDIR is not unset.
In general this doesn't cause a problem but if do_patch is embedded in a larger
function then TMPDIR is set to a directory that doesn't exist. Avoid this by
removing TMPDIR from os.environ when the directory is deleted.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
read -d is a bashism. Replace with a direct exec to avoid the problem
in this case. This fixes silent build failures in do_install of
tasks on systems with dash as /bin/sh.
Also merge the fix to distutils for only changing necessary files
to disutils3 as well.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Anything using gtk-doc will be using pkgconfig as well so
add in the dependency rather than doing it for each and every recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The variable was only partially implemented, and the part that was there
was named incorrectly to, missing the 'TASK' piece.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The meta-mingw layer attempts to change the SDK Suffix, but the rpm
packaging had a hard coded reference to _nativesdk.
I did a quick scan for other hard coded entries and did not fine any
more.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some packages put their CMakeLists.txt file in a subdirectory, so assuming that
it is in ${S} won't work.
Restore OECMAKE_SOURCEPATH (defaulting to ${S}) so that the location of
CMakeLists.txt can be set if required.
Based on a patch by Miroslav Keš <miroslav.kes@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add MLPREFIX to depends flag to ensure the correct gummiboot is
dependended upon.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add MLPREFIX to depends flag to ensure the correct grub-efi is
dependended upon.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add MLPREFIX to depends flag to ensure the correct syslinux is
dependended upon.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the preconfigure task was added to gcc, it wasn't added to sstate's list
of possible shared work tasks. This meant that diffsigs wasn't able to find
the preconfigure sigdata/info file since it has inconsistent naming.
This adds the task name to the list. Ideally this list would be autogenerated
or not even required, right now its a sanity test that the shared work
code works as intended so is best left as is.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
