| Age | Commit message (Collapse) | Author | Files |
|---|
|
Fix the incremental rpm image generation, it didn't work since the code
has been changed.
The btmanifest should have a ".manifest" suffix, so that it can be moved
to ${T} by rootfs_rpm.bbclass:
mv ${IMAGE_ROOTFS}/install/*.manifest ${T}/
Note: The locale pkgs would always be re-installed.
[YOCTO #2440]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Connect the new fetcher file checksum code so that we get a list of the
files to be checksummed at parse time.
The file-checksums flag will not be read unless we are using a version
of BitBake that supports the function we call within it, so it is safe
to include this change even when the metadata will still be used with
older versions of BitBake.
Implements [YOCTO #2044].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
needed for new architecture support
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Jason Wessel noticed that a package without any fixmepath entries would
generate a sed warning about no input files. This patch resolves that
by ensuring that an empty fixmepath file never gets written into the
sstate archive. Also we avoid a second message by only doing xargs if
we got input.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a new PACKAGEFUNCS function to check the multilib packages'
dependency.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added multilib prefix to the locale related package names/dependencies.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The user needs read and write permissions to SSTATE_DIR, check
whether they have sufficient permissions and if not recommend
use of SSTATE_MIRRORS.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Add two default set(SOURCE_ARCHIVE_LOG_WITH_SCRIPTS, \
SOURCE_ARCHIVE_PACKAGE_TYPE) to archiver.bbclass for avoiding \
building error when forgetting to assign to them.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
|
|
In order to make sharing sstate files easier chmod them with 0664 permissions so that they are readable and writable by the user and any other members of their group.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
It's common to provide a non-machine-suffixed link in DEPLOY_DIR_IMAGE, so
let's be consistent and do so here as well.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The fixmepath file that is generated contains a list of all of the files
that need their paths fixed. In the previous version the fixmepath was
generated to include all of the files that sed may have changed. In the
new version, we first grep the files to see if they contain a path that
needs to be changed, only then do we perform the sed operation on those files.
This results in a modest performance increate in the creation of the sstate
file. The following numbers include the do_package and do_populate_sysroot
tasks on the perl recipe.
Before the change:
real 4m23.018s
user 1m57.067s
sys 1m33.327s
After the change:
real 4m13.083s
user 1m54.062s
sys 1m26.064s
However, a more significnt performance gain is felt during the
extraction/install of sstate cache files, as the fixmepaths file now has a
significantly smaller list of files to modify.
Before the change:
real 0m39.798s
user 0m11.158s
sys 0m12.642s
After the change:
real 0m25.511s
user 0m8.408s
sys 0m5.077s
(All numbers above were recorded with a cold filesystem cache on a machine
with 12 GB of ram.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_split_locales
As the comment says, using packages[0] is rather broken and can be incorrect,
as demonstrated by the recent gdk-pixbuf change. Replacing it with PN is
a bit more correct and more likely to do what was originally intended
by this function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.
If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a pathological case, lots of files to process, the sstate_installpkg
performance was very poor. It interated over each file and ran 3
individual sed commands per file. Changing this to keep iterating
but running only a single command took about 1/3 time time.
However, when looking at the corresponding sstate_hardcode_path
function, it was clear we could optimize this further.
Using the same encoding logic to specify only the minimumal sed
operation necessary, and using xargs to avoid the os.system call the
install step was able to be performed in 13% of the original time.
Example timing numbers for perl:
3m7s original code
1m20s single sed, but interating
0m26s using xargs and limited sed
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
Empty components in $PATH have the same effect as a . in $PATH,
and are a common side-effect of inserting a misspelled or unset
shell variable in $PATH.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
Revise the handling from ANGSTROM_BLACKLIST to PNBLACKLIST[pn].
Refactor the code to eliminate references to the distribution and recipe
name in the message.
Change the skipPackage message message from:
ERROR: <recipe> was skipped: <distro> DOES NOT support <recipe> because <reason>
to:
ERROR: <recipe> was skipped: Recipe is blacklisted: <reason>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Import directly from meta-openembedded commit: a63c374cdc785ade69d2998978d08280e671dc1f
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
We need to add MLPREFIX when set RDEPENDS by setVar() function.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Signed-off-by: Ting Liu <b28495@freescale.com>
|
|
This introduces a sanity check for the toolchain, which verifies
each tuning (including any multilibs), producing meaningful diagnostics
for problems, and also provides some higher-level tuning features.
The TUNEVALID and TUNECONFLICT/TUNECONFLICTS settings were not
implemented. Listed one or two missing features in TUNEVALID,
also (in a previous patch) fixed the references to
features which didn't exist.
This patch also provides a whitelisting mechanism (which is completely
unused) to allow vendors providing prebuilt toolchain components to
restrict tunings to those based on or compatible with a particular ABI.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
In order to support repositories of various types (with or without
meta data, branched, pristine, custom, etc) information about the
type of processing that is required was passed to the processing
phases via variables.
The combination of variables involved in coordinating the processing
creates a learning curve and overly complicates recipe extensions.
With minor tweaks to the kern-tools, adding flexibility and keying
off the existence of the meta branch it is possible to remove all
of the variables that were added to support different repository
types.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Some versions of the screen utility provided from the host OS vendor
write the socket directory to $HOME/.screen. When using a shared home
directory across many servers, one sets the SCREENDIR environment
variable to avoid collisions in the shared home directory. This
results in problems launching a devshell where it is not entirely
obvious what happened because the SCREENDIR environment variable
got stripped from the environment prior to setting up the screen
in detached mode.
Example:
% bitbake -c devshell busybox
# ...Please connect in another terminal with "screen -r devshell"
% screen -r devshell
There is no screen to be resumed matching devshell.
The temporary work around was to do something like:
sh -c "unset SCREENDIR; screen -r devshell"
This patch adds SCREENDIR to the white list to ensure screen
works properly on systems where a developer needs to use
the SCREENDIR with shared home directories.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The echo line here was merging multiple lines into one, and the result
was that if both image and package changes had to be comitted then only
the image changes were being committed and the package changes could
potentially be merged into the next package change. Quoting the variable
reference fixes this.
Fixes [YOCTO #2411]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If KERNEL_IMAGETYPE is vmlinux, the expectation is most likely that there will
be no kernel image package, but we still want a vmlinux package for debugging,
so move kernel-vmlinux in front of kernel-image in PACKAGES.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were a couple problems with the handling of precompiled locales.
- it gathered the list of locales from the directories - this breaks due to
the naming mismatch, e.g. en_US.UTF-8 vs en_US.utf8.
- it retained its hardcoded assumption that the non-suffixed locale (en_US, as
opposed to en_US.*) is UTF-8, while the others are otherwise. Hardcoding
this is both inflexible and just plain wrong for some toolchains. It's most
common in desktop distros for 'en_US' to be non-utf8, and ''en_US.UTF-8' is
utf8, and this is the case in some external toolchains as well.
The code now uses the SUPPORTED file to hold the knowledge it needs. This file
not only holds the list of locales to generate, but also maps the locale names
to the charsets they correspond to. The code now uses this to assemble its
charset map, falling back to the '.' suffix as charset when the locale is not
in the map. For precompiled, it now uses the locale->charset knowledge it has,
thereby allowing non-utf8 non-suffixed locale names, whereas for
non-precompiled, it reverts to the previous assumption, renaming the utf8
locale and forcibly suffixing the others.
So, a person maintaining an external toolchain recipe is responsible for
ensuring that the SUPPORTED file they provide matches up with the compiled
locales in the toolchain, if they want to utilize precompiled locales.
I believe in the long term the compiled case should do the same thing
precompiled does, and use SUPPORTED or a similar mechanism to encode the
knowledge, and if people want all the non-suffixed names to be utf8, they can
change that file to do so. This would avoid the hardcoded assumption in the
code, as well as consolidating the behavior between the compiled and
precompiled cases.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
|
|
Signed-off-by: Christopher Larson <kergoth@gmail.com>
|
|
Signed-off-by: Christopher Larson <kergoth@gmail.com>
|
|
This change farms the solvedb creation out to a separate script which
handles creation of the index, only if mtime of any of the packages
has changed.
For a core-image-minimal set of rpm's this saves ~20s of a 45s rootfs
build. For core-image-sato it saves 1 minute of a 5 minute rootfs build.
The more packages in the system, the bigger the saving will be.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing shell script is a fork bomb and forks off hundreds of
grep/cur/wc calls as it reads from its input stream and iterates over
the file data table for each line of input. This patch replaces the
shell code with python code which doesn't exec anything and hence runs
much faster without the exec() overhead. This speeds up rpm packaging
considerably, as can be measured simply by timing it, or watching the
processor utilisation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have currently no override to detect a recipe being build cross, crosssdk
or for target at times we can use virtclass-native and virtclass-nativesdk to
override stuff in recipes but we dont have way to modify a variables
based on recipe type always.
This patch adds in such an override and in particular makes a target override
class available.
With this change now we can say:
EXTRA_OECONF_class-target = "...."
EXTRA_OECONF_class-native = "..."
EXTRA_OECONF_class-nativesdk = "..."
EXTRA_OECONF_class-crosssdk= "..."
Based of an original patch by Khem Raj
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* indentation was with spaces and tabs, unify to use tabs instead of
spaces, for shell code and populate_packages_preppend,
because "python populate_packages" expects tabs (or 8 spaces)
* and use 4 spaces for anonymous python
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* allows to detect ENTRYPOINT from kernel binary marked with UBOOT_ENTRYSYMBOL
used e.g. by ben-nanonote
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
things
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows iso images to be written to usb keys and booted on systems which
have a BIOS which support this. There is no real down side to tweaking the iso
images in this way.
[YOCTO #1763 partial]
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove /etc since it is empty, when creating a machine that does not
deliver any module config files, the /etc is empty and is then warned
about not being shipped, so we remove it.
This occurs in the routerstationpro with the following warning:
WARNING: For recipe linux-yocto, the following files/directories were installed but not shipped in any package:
WARNING: /etc
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Judge if "SanityCheck" event is received, it will issue the
sanity_check() and send "SanityCheckPassed" back if succeeded.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for Hob to be able to disable the sanity checks completely
without marking them as passed so that the user can get into the GUI to
configure their settings, etc.
Add a variable, DISABLE_SANITY_CHECKS, to do so.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Kernel modules are not marked as executable but we do expect to strip them.
This patch adds in missing code to ensure we do this. Without this images
are getting sigificantly bloated in size.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In particular, this overwrites the value from cross-canadian.bbclass in
some cases which isn't the desired behaviour and unnecessarily
complicates/breaks the dependency chain.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For beagleboard platform, the PACKAGE_ARCH for certain recipes is
"armv7a-vfp-neon", however, the architecture label in RPM file name is
"armv7a" due to a potential bug in RPM backend.
This commit is a workaround to make Hob work in this case.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We call re.sub here, so we need to "import re" or an error occurs
(tested on OpenSuSE 12.1).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
