| Age | Commit message (Collapse) | Author | Files |
|---|
|
Currently bad recommendations are added to the status file with status
"ok". After a single opkg command, whilst it will ignore the recommendation,
the status changes to "installed" even if the recommended package was not
installed. Whilst this is likely a glitch in opkg's logic, the correct
way to persist the information in the status file is to set the status
to "hold" as deinstall packages with that status remain. With this change
the bad recommendations persist accross multiple opkg runs and the system
behaves as expected.
[YOCTO #1758]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable script debugging, as the log files become huge and take a
long time to process during the log check step. This results in a
performance improvement.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
task level)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of running the following over the metadata:
sed \
-e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've had the check for dash as /bin/sh for a long time. Dash has been
around long enough now that most major issues have been identified and
fixed from build perspective.
This patch fixes a bashism in the openjade-native recipe. It also
adjusts libtool so that the header at the script is used and not the
value of $SHELL. This is because many Makefiles change $SHELL so dash
can get used to execute what is otherwise configured as a bash shell
script. Since we don't need to execute scripts this way on any system I'm
aware of us building upon, the simplest fix is just to remove $SHELL.
With these two changes the dash check can be removed and we can allow
builds with dash as /bin/sh
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Note: I know I need to add the description of the libtool change above
into the prefix.patch]
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this rootfs generation fails as an RDEPENDS is added
but the package might not have bneen built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Exclude the addition of user/group code and RDEPENDS changes for
-nativesdk packages.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
Previously we injected the user/group preinstall script into all
output packages. This fixes that so that only packages listed in
USERADD_PACKAGES get modified.
It also removes the USERADDPN variable, which is no longer needed.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch pulls in the gnome related classes from oe-core which
adds extra packaging rules and functionality whilst modularising things
so that one can get a subset of gnome functionality without adding a lot
of extra dependencies.
These aren't an exact copy of the classes from meta-openembedded, notable
differences are:
* gnome.bbclass - I dropped the BBCLASSEXTEND
* mime.bbclass:
- updated coding style
- use which to find update-mime-database program rather than hard coded
- fix typo in populate_packges_append such that it's actually called
CC: Koen Kooi <koen@dominion.thruhere.net>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Our current assumption (based on the behaviour of opkg) when writing
recipes is that prerm and postrm do not get called during an upgrade.
When using rpm however, these are mapped to the rpm "preun" and "postun"
events which occur after postinst for upgrades, and when these contain
removal type operations (such as update-alternatives --remove) this
causes problems.
This patch wraps each preun and postun script for rpm in a check that
determines whether or not the script is being called during an upgrade,
and skips the entire script if it is, which mimics the behaviour of opkg
under the same conditions.
Fixes [YOCTO #1760]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Allows us to import classes only for images and not to the global
namespace
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
* without this patch, building dbus-nativesdk leads to a missing
dependency on 'base-passwd-nativesdk'
This was added by commit 46e6c3fa8034b12d178d605f3f5d7efe69671a13
* this patch handle the nativesdk case in the class useradd
* close bug 1702 http://bugzilla.pokylinux.org/show_bug.cgi?id=1702
* v2 from Scott Garman with Richard Purdie's tricks
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should just be a single IMAGE_INSTALL variable. If the package
backends need this split into different multilib components they should
be responsible for doing this, not the user.
This commit removes the MULTILIB_IMAGE_INSTALL variable.
[YOCTO #1564]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix bug where only packages named PN included base-passwd in
RDEPENDS.
This fixes [YOCTO #1727]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
all-arch packages should not contain any binaries that need processing,
so disable the shared library dependency processing and debug symbol
splitting/stripping to save some time during packaging.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
immediately
genext2fs only creates the minimum number of inodes, after this patch it will scale with the rootfs size
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
[YOCTO #1712]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Fixed YOCTO bug format and location
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
tmpfs/encryptfs/(and most likely, but not confirmed)ramfs TMPDIRs
cause diskstats to choke. No device entry ends up in /proc/diskstats
for these fs types, which ends up causing the failure.
The short term solution is to exclude these fs types from diskstat
collection. Longer term we will want to see if we can collect
meaningful diskio for each of these, and other, use cases, but for
this cleans up Bug 1700.
[YOCTO #1700]
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Corrected YOCTO bug location and format
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
instead
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yes, this one is against meta-yocto, I'll fix it to apply the same
change to OE-Core's local.conf.sample in the final version]
|
|
Unfortunately we can't access oe_terminal directly from patch.py
so we have to pass in the correct terminal function pointer.
[YOCTO #1587]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Preinst are run alphabetically which breaks when e.g. avahi-daemon needs /etc/passwd present.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
a set of pre built m4 macros
When analysing our build performance, its apparent that binutils-cross
takes an age to get built. This is due to its dependencies on
flex-native and bison-native which in turn depend on gettext-native.
gettext-native is problematic as it has a significant dependency chain
of its own and takes an age to build. What is worse is that we never
care about the native language support in -native and -cross packages
since we always force the C locale.
This patch therefore disables nls for all -native packages (its already
disabled for -cross) and adds a new gettext-minimal-native package which
contains the m4 macros to keep autoconf/automake happy.
This means we gain a significant build time speedup by the removal of
gettext-native from most dependency chains (only being part of gettext
for the target now).
For now the LICENCE field says GPLv3, the macros are actually under a
FSF MIT like licence so we need to update this part of the patch in due
course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before this change:
a) Ownership and permissions of files copied from packages to
package-split could get lost during the copy process. This change
ensures they are preserved.
b) Ownership and permissions of directories could also get lost.
Most of the complexity in this patch is addressing this problem
ensuring newly created directories match the source ones being
copied.
c) There was no warning about directories being created but not
shipped by any package.
This patch fixes all of the above issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the packaging process is run under pseudo, the default user
is now root so there is no longer any need to hardcode this. Also
take this opportunity to move the variable to package_ipk.bbclass
since this is the only user of it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* it's also defined here conf/distro/include/default-versions.inc, so maybe it could be dropped
* and similar variable is
recipes-devtools/python/python.inc:PYTHON_MAJMIN = "2.7"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The use of groupadd -f makes much more difficult to figure when a
group is not add. This was the case of the class not working for our
usage and this being caused by the lack of '/etc/group' file but
unnoticed as groupadd wasn't failing according.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
If an image sets NOHDD = "1" the HDD image won't be build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
When external modules are built, files in $STAGING_KERNEL_DIR/scripts/basic will/can get
rebuilt.
This raises a potential race condition. Prevent this by adding a lock around the
do_make_scripts() function. Further, make sure that the kernel has been installed
to the sysroot, prior to executing this new task.
Signed-off-by: Anders Darander <anders@chargestorm.se>
|
|
Currently only the basename is printed when os.path.isfile() returns a failure
for the license file. If the file is present, but in the wrong directory, this
can be non-obvious to debug. Use the full path instead.
Make a minor grammatical correction in the error message while we're at it.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The code used to reference unavailable variables and mistakenly define
the tasks so fully demonstrating this have not been in use for a
while.
During the code rewrite, it was extended to copy also the patches into
the source distribution directory but using the PF as prefix to avoid
name colision among other recipes.
As 'distsrcall' task was not properly defined and noone noticed it,
until now, it got renamed to 'distribute_sources_all' as it is a
better and more meanful name for the task.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Fix broken rootfs image link when ubifs is used.
Function runimagecmd is using image name "${IMAGE_NAME}.rootfs.${type}".
Let's use the same name in IMAGE_CMD_ubifs.
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This is needed to better support things like the following (with a
multi-word BUILD_CC):
EXTRA_OECONF += '"ac_cv_prog_CC_FOR_BUILD=${BUILD_CC}"'
Signed-off-by: Christopher Larson <kergoth@gmail.com>
|
|
If we pull SCM based code using gettext, Makefile.in.in in the
po directory can be missing. We therefore need to add this if
its not already present. We could use gettextize if it wasn't
so broken (for example requiring user input on stdin and installing
way more files that we ever care about such as the m4 files).
We also have a problem if a recipe sets a different AUX dir, for
now fix this by allowing recipes to specify when this is being done
using the AUTOTOOLS_AUXDIR variable. Ultimately we could likely
figure this out automatically.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
parallelization
We can generate the locales in parallel. The easiest way to do this is
generate a Makefile and then run this with our usual parallel make
options.
[YOCTO #1554]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to baselib by specific machine configuration were resulting
in sstate cache invalidation, particularly in multilib configurations.
This patch ensures this doesn't happen and native sstate cache files
are reusable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
current task
sstate was being a little too ethusiastic about removing stamp files and
was removing stamp files for other machines when it shouldn't have been.
This patch teaches sstate about machine specific stamp extensions and
allows it to only remove the current task's stampfiles.
Based on a patch from Phil Blundell <philb@gnu.org> with some tweaks
from me.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running fetch/unpack/patch/compile/install etc. is pointless
since the only image task that does anything is the rootfs task.
Hence mark the useless tasks as noexec so we don't bother running them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These enabled options to be specified in the form:
PACKAGECONFIG ?? = "<default options>"
PACKAGECONFIG[foo] = "--enable-foo,--disable-foo,foo_depends,foo_runtime_depends"
So that DEPENDS, RDEPENDS_${PN} and EXTRA_OECONF can be automatically
built from specific options. Those options can easily be customised
by the distro config or the user.
Based on some ideas from Chris Elston <celston@katalix.com> but with
an improved easier to use one line interface.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The target SDK packages don't need to fulfil a shell dependency
so add /bin/sh to the list of packages we don't need to resolve.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes some error messages in the do_rootfs logs of non-multilib
builds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
