summaryrefslogtreecommitdiff
path: root/meta/classes
AgeCommit message (Collapse)AuthorFiles
2013-12-20testimage: include traceback when loading a test failsStefan Stanacar1
Makes it much easier to figure out where a syntax error is. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-20ptest: Disable for native recipesRichard Purdie1
We don't use or otherwise care about ptest for native recipes. Its therefore pointless to take the performance hit for them and we can disable them. (From OE-Core rev: f3d35bb4719d0b8f8e6fc5976e9dbfc0e2019c2e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-20ptest: Fix dependency/ordering issueRichard Purdie1
We've seen occasional issues on the autobuilder where files appear during do_populate_sysroot and this is due to the ptest installation happening in parallel. This fixes the order to be deterministic. (From OE-Core rev: 0ed1641d870f4bb5735aeeb7bd29cc196e61b7cc) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-20externalsrc: Use deltask APIRichard Purdie1
Now we have deltask API, stop poking around bitbake internal variables. (From OE-Core rev: 98637df0c04fd14b506d9eec7da8ec6ae441221b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-20native: Use deltask to remove tasks which have no purposeRichard Purdie1
core-image-sato has 47703 inter task dependencies before this patch and 29883 afterwards which is a significant worthwhile task graph simplification. (From OE-Core rev: ac4b1518ec549b5a4d7a79c60dbf96b90797e1d8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18systemd: pass --root in prerm if running on hostRoss Burton1
If a systemd image is built without a package manager then packages will be removed from an image during rootfs generation, but without passing --root the systemctl will look on the *host* system. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18buildhistory: be quiet when garbage collecting the git repoRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18useradd.bbclass: add dependency on base-filesRoss Burton1
Packages that use useradd.bbclass should have a dependency on base-files so that the /etc/skel directory is populated. Without this dependency base-files may or may not be installed when the postinst runs, and the skel content may or may not be copied. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18sstate: Get rid of crazy name mappingRichard Purdie11
When originally developed, it was thought a task may have more than one associated sstate archive. The way the code has grown that idea is now not possible or needed. We can therefore assume one sstate archive per task and drop the crazy name mapping code. Simpler is better in this case. The downside is that various sstate archives will change name so this forces a cache rebuild. Given the other sstate changes going in at this time, this isn't really a bad thing as things would rebuild anyway. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18sstate/gcc: Fix shared workdir handling for siginfo filesRichard Purdie1
For a shared workdir, any one of the fetch/unpack/patch tasks may run yet the PN and architecture fields in SSTATE_PKGSPEC may differ. This makes looking up the appropriate siginfo file near impossible. I've tried several different ways of resolving this and this is the neatest solution I could find, its still rather ugly. I believe the usefulness of better sstate debugging outweighs the ugliness of the code. This patch also changes the sstate_checkhashes() code to look for siginfo files rather than the actual sstate packages themselves. This means the function can be used in other contexts to find info files for tasks that may not have sstate data. It is assumed that sstate mirrors will have both files available. This is done to allow bitbake to query whether tasks have matching signatures in sstate directories or not. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-18sstate: Write out siginfo files for non-sstate tasksRichard Purdie1
Currently siginfo files are only written for sstate tasks. In order to be truly debuggable, its helpful to have the siginfo for intermediate tasks. This adds that functionality so the extra siginfo files are written out too. This will be used to add better sstate debugging in future changes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-16insane: handle recursive configures when checking for unknown configure optionsRoss Burton1
Some recipes have configure scripts that recursively call other configure scripts (e.g. dropbear). These multiple-line matches were not being handled correctly, so iterate over every matching line instead of assuming only one line was found. [ YOCTO #5646 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-15nativesdk: Set LIBCOVERRIDE to a valueRichard Purdie1
nativesdk was just unsetting LIBCOVERRIDE however that causes some build failures for xorg-libs which used a libc override. This adds in a mechanism to force nativesdk to glibc and give the option of allowing another selection like uclibc if anyone ever does the work to make it operational. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-14image.bbclass: fix for zap_root_passwordChen Qi2
Previously, this function replaces the root password with '*' if 'debug-tweaks' is not in IMAGE_FEATURES. It not only zaps empty root password, but also zaps non-empty root password. That means, if the user uses a bbappend file for base-passwd to set the root password, he would not be able to login as root; if the user uses 'EXTRA_USERS_PARAMS' to set the root password, he would still not be able to login as root. What we really want from this function is to disallow empty root password if 'debug-tweaks' is not in IMAGE_FEATURES. This function should not remove non-empty root password because that password is usually deliberately set by the user. This patch renames zap_root_password to zap_empty_root_password to better reflect the intent of this function. It also modifies the code to make this function work correctly. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-14image.bbclass: default USE_DEVFS to '1'Chen Qi1
Default USE_DEVFS to "1" so that the `makedevs' command is not run at rootfs time by default. There are mainly two reasons to do so. 1. This will fix a build failure with initramfs-kexecboot-klibc-image. "makedevs: No entry for root in search list " 2. Most of our images use a filesystem over /dev. Most of the time, it's just devtmpfs. So we actually are using a filesystem over /dev. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-14cpan_build bbclass: do not install module into /usr/shareKoen Kooi1
https://github.com/openembedded/oe-core/commit/83796edd29561f02b6f7b036351711f8def77a4f is a partial solution, this fixes cpan_build.bbclass as well. A non-working one looks like this: [koen@rrmbp v2013.06]$ dpkg-deb -c deploy/eglibc/ipk/armv7ahf-vfp-neon/perl-module-build-withxspp_0.14-r0.0_armv7ahf-vfp-neon.ipk -rw-r--r-- root/root 361 2013-11-28 16:50 ./usr/lib/perl/auto/Module/Build/WithXSpp/.packlist -r--r--r-- root/root 22557 2013-11-28 16:50 ./usr/share/perl/Module/Build/WithXSpp.pm It now looks like this: [koen@rrmbp v2013.06]$ dpkg-deb -c deploy/eglibc/ipk/armv7ahf-vfp-neon/perl-module-build-withxspp_0.14-r*.ipk -rw-r--r-- root/root 378 2013-11-29 14:44 ./usr/lib/perl/auto/Module/Build/WithXSpp/.packlist -r--r--r-- root/root 22557 2013-11-28 17:22 ./usr/lib/perl/vendor_perl/5.14.3/Module/Build/WithXSpp.pm Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-14distutils bbclass: delete site.py*Koen Kooi1
Multiple recipes package this generated file and will clash during installation with: | Collected errors: | * check_data_file_clashes: Package python-nose wants to install file /build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/work/beaglebone-angstrom-linux-gnueabi/cloud9-gnome-image/1.0-r0/rootfs/usr/lib/python2.7/site-packages/site.pyc | But that file is already provided by package * python-setuptools | * check_data_file_clashes: Package python-nose wants to install file /build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/work/beaglebone-angstrom-linux-gnueabi/cloud9-gnome-image/1.0-r0/rootfs/usr/lib/python2.7/site-packages/site.py | But that file is already provided by package * python-setuptools Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-13grub-efi: change to generate EFI image in target packageJackie Huang1
To generate the target EFI image in a native package, it requires the host gcc have the ability to do -m32/-m64 compiling, but gcc doesn't have that support on the 32bit version of some distributions (e.g. rehl, suse), it would fail when build a 64bit target on these 32bit hosts. In fact, all we need from grub-efi-native is the grub-mkimage binary, so change the solution to: * grub-efi-native only install grub-mkimage * grub-efi compiles target modules, generates EFI image with grub-mkimage and deploy, but install nothing. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-12classes/module_strip: removePaul Eggleton3
This class has been empty since 2010, so we shouldn't need it anymore. A check of common layers suggests there shouldn't be any references to it outside of OE-Core. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-10buildhistory.bbclass: Specify lang in decoding stringsKhem Raj1
On systems where default locale is utf-8 we get errors like File: 'buildhistory.bbclass', lineno: 38, function: write_pkghistory 0034: if pkginfo.rconflicts: 0035: f.write("RCONFLICTS = %s\n" % pkginfo.rconflicts) 0036: f.write("PKGSIZE = %d\n" % pkginfo.size) 0037: f.write("FILES = %s\n" % pkginfo.files) *** 0038: f.write("FILELIST = %s\n" % pkginfo.filelist) 0039: 0040: for filevar in pkginfo.filevars: 0041: filevarpath = os.path.join(pkgpath, "latest.%s" % filevar) 0042: val = pkginfo.filevars[filevar] Exception: UnicodeEncodeError: 'ascii' codec can't encode character u'\xed' in position 337: ordinal not in range(128) This patch specifies decode to use utf-8 so ascii and utf-8 based locales both work Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-10multilib: Ensure we map the SYSTEMD_PACKAGES variableRoy Li1
If we don't do this, systemd.bbclase will complain to unable to find multilib packages since PACKAGES is expand with mlprefix, but SYSTEMD_PACKAGES is not, like in ntp.inc: $grep PACKAGES meta-oe/meta-networking/recipes-support/ntp/ntp.inc PACKAGES += "ntpdate sntp ${PN}-tickadj ${PN}-utils" SYSTEMD_PACKAGES = "${PN} ntpdate sntp" $ $bitbake ntp ERROR: ntpdate does not appear in package list, please add it ERROR: sntp does not appear in package list, please add it $ Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-10toaster.bbclass: read package and image informationAlexandru DAMIAN1
In the process of removing the local system accesses from toaster UI (which must be able to run remotely), the code to read package information is moved from Bitbake Toaster UI to the server-side toaster.bbclass [YOCTO #5604] Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
2013-12-10toaster.bbclass: read build statsAlexandru DAMIAN1
In the process of removing the local system accesses from toaster UI (which must be able to run remotely), the code to read build stats is moved from Bitbake Toaster UI to the server-side toaster.bbclass The code will accumulate a list of stat files to be read at build completion. When the build completes, the whole data list is read and sent through in a single event. [YOCTO #5604] Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
2013-12-10toaster.bbclass: read layer informationAlexandru DAMIAN1
In the process of removing the local system accesses from toaster UI (which must be able to run remotely), the code to read layer information is moved from Bitbake Toaster UI to the server-side toaster.bbclass [YOCTO #5604] Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
2013-12-09nativesdk.bbclass: support nativesdk to override with the PACKAGES_DYNAMIC ↵Hongxu Jia1
statement While compiling nativesdk-mtools, there was failure: ... Nothing PROVIDES 'nativesdk-glibc-gconv-ibm850'. Close matches: ... This patch supports nativesdk to override with the PACKAGES_DYNAMIC statement [YOCTO #5623] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-09buildhistory.bbclass/image.bbclass: remove obsolete codesRoy Li2
After 1b8e4abd2d9c0 [bitbake.conf/package: Collapse PKGDATA_DIR into a single machine specific directory], oe-pkgdata-util does not use target_suffix parameter, so do not need to loop the vendor Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-09license.bbclass: fix copying license directories failedHongxu Jia1
For each recipe, it populated license files to ${LICENSE_DIRECTORY}/${PN}, such as kernel's license dir was ${LICENSE_DIRECTORY}/kernel-3.10.17-yocto-standard; In do_rootfs task, it copied license directories from ${LICENSE_DIRECTORY}/ ${pkg}, and ${pkg} was listed in ${INSTALLED_PKGS}; We got ${INSTALLED_PKGS} by rpm query, such as the kernel were 'kernel-*', but the kernel's PN was linux-yocto, so searching ${LICENSE_DIRECTORY}/ kernel-* failed. Copied license directories from ${LICENSE_DIRECTORY}/${PN} fixed this issue. [YOCTO #5572] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-09boot-directdisk: add the support of vmdkyanjun.zhu1
add the support of vmdk. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-05classes/buildhistory: fix reading of package-specific values from pkgdataPaul Eggleton1
When writing out variable values to pkgdata, if the value has been set in the datastore with an override for the package, we use the package name override in the pkgdata key as well; however the recently added code to read pkgdata in buildhistory.bbclass was just using the override where we normally expect to have it. However, if a recipe overrides one of the values that is normally set for the recipe on a per-package basis (e.g. the external-sourcery-toolchain recipe sets PKGV this way) then this led to KeyErrors. Re-write the pkgdata loading code to always strip off the package name override if it is present. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05cpan-base: Add vardepvalue to get_perl_version functionMartin Jansa1
* without this bitbake -S perf shows following error: ERROR: Bitbake's cached basehash does not match the one we just generated (/OE/oe-core/meta/recipes-kernel/perf/perf.bb.do_package)! if you run it twice, once without perl in sysroot and once with perl already built Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05icecc.bbclass: Fix whitespace, improve commentMartin Jansa1
* Add leading space in big documentation block at the top * Drop trailing spaces in code * Update documentation to mention 'bb.utils.which' instead of 'which' Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05bitbake.conf/native.bbclass: Use FC instead of F77 for fortranRichard Purdie1
gcc tooling appears to be standardising around the FC variable naming. This patch changes the F77 namespace to FC instead and use the default gfortran compiler. If anyone needs the F77 variables or tools, those can still be made on a case by case basis. Also updates local.conf.sample.extended accordingly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05classes/recipes: More optimal DISTRO_FEATURES referencesRichard Purdie3
Using the contains function results in more optimal sstate checksums resulting in better cache reuse as we as more consistent code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03ptest: ensure do_install_ptest_base task runs in fakeroot contextRoss Burton1
As this task is installing files into $D it needs to run inside pseudo so that special permissions and owners are preserved. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03populate_sdk: verify executable or dynamically linked libraryyzhu11
When toolchain directory is changed to execute mode, some non-executable files or empty files are sorted. This will result in some errors. Thus when sorting executable files or dynamically linked library, additional conditions are to exclude non-executable files or empty files. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03image-mklibs: ensure sysroot is correctly set when calling gccNicolas Dechesne1
[YOCTO #2519] When getting gcc from sstate, it is possible to get a gcc with a bogus sysroot configuration, as discussed in [1] or in [YOCTO #2519]. mklibs script will eventually call gcc, so we need to make sure that it provides gcc with the right sysroot location. [1] http://lists.openembedded.org/pipermail/openembedded-core/2013-September/084159.html Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03testimage: use the new targetcontrol.py module for running testsStefan Stanacar2
This patch makes the necessary changes for using the targetcontrol.py module so that one can run the same tests on a qemu instance or a remote machine based on the value of TEST_TARGET variable: "qemu" or "simpleremote". The default value is "qemu" which starts a qemu instance and it's the with what we currently have. With "simpleremote", the remote machine must be up with network and ssh and you need to set TEST_TARGET_IP with the IP address of the remote machine (it can still be a qemu instance that was manually started). Basically testimage.bbclass now does something along the lines of: - load tests -> deploy (prepare) / start target -> run tests. There were a couple of changes necessary for tests and also some cleanups/renames that were needed to adjust this change. (use ip everywhere when refering to target and server_ip when refering to host/build machine) Also two unnecessary and unsed methods were dropped from sshcontrol. [ YOCTO #5554 ] Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/buildhistory: do git garbage collection after committingPaul Eggleton1
We don't normally perform any operations (such as "git pull") that trigger "git gc --auto", thus garbage collection never happens which means performance of accessing the repository degrades noticeably over time. Add an explicit "git gc --auto" to clean things up when needed. Thanks to Elijah Newren and Ross Burton for suggesting this. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/buildhistory: reduce parsing timePaul Eggleton1
Disable several python functions if not parsing within the worker context. This avoids executing expensive operations while parsing recipes (which is unnecessary). (Thanks to Richard Purdie for pointing out the issue and suggesting the workaround.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/buildhistory: improve collection of package infoPaul Eggleton1
Use a function added to SSTATEPOSTINSTFUNCS and read the necessary information out of pkgdata, instead of using a function executed during do_package that reads the data directly. This has two benefits: * The package info collection will now work when the package content is restored from shared state * Adding/removing the inherit of buildhistory will no longer change the do_package signatures and force re-execution of that function for every recipe. Fixes [YOCTO #5358] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/buildhistory: add additional variables to image informationPaul Eggleton1
Add PACKAGE_EXCLUDE and NO_RECOMMENDATIONS to the info we track for images, since these can change what ends up in the image. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/buildhistory: drop cruft from old SRCREV tracking implementationPaul Eggleton1
This should have been removed when the implementation was rewritten in OE-Core commit 2179db89436d719635f858c87d1e098696bead2a. The collected values weren't being used anywhere since then. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/package: write PE and PKGE out to pkgdataPaul Eggleton1
These are important parts of the version for every package, so we should include them in PKGDATA just as we include PV/PR/PKGV/PKGR. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/package: record PKGSIZE as total file size in pkgdataPaul Eggleton1
We were using "du -sk" to collect the total size of all files in each package for writing out to PKGSIZE in each pkgdata file; however this reports the total space used on disk not the total size of all files, which means it is dependent on the block size and filesystem being used for TMPDIR on the build host. Instead, take the total of the size reported by lstat() for each packaged file, which we are already collecting for FILES_INFO in any case. Note: this changes PKGSIZE to be reported in bytes instead of kilobytes since this is what lstat reports, but this is really what we should be storing anyway so that we have the precision if we need it. Fixes [YOCTO #5334] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/package: fix FILES_INFO serialisation in pkgdataPaul Eggleton2
The FILES_INFO entry in each pkgdata file stores the list of files for each package. Make the following improvements to how this is stored: * Store paths as they would be seen on the target rather than erroneously including the full path to PKGDEST (which is specific to the build host the package was built on) * For simplicity when loading the data, store complete paths for each entry instead of trying to break off the first part and use it as the dict key * Record sizes for each file (as needed by Toaster) * Serialise the value explicitly using json rather than just passing it through str(). Fixes [YOCTO #5443]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-03classes/icecc: fix typos in header commentsPaul Eggleton1
Looking at the code, it should be ICECC_USER_PACKAGE_BL and not ICECC_PACKAGE_BL here, and also fix "localy" -> "locally". Thanks to Scott Rifenbark for pointing this out. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-29image.bbclass: Depend on virtual/kernel:do_deployRichard Purdie1
Now that none of the packagegroups depend on virtual/kernel, we have the problem that MACHINE=qemumips bitbake core-image-minimal doesn't put a kernel into the deploy directory. This breaks many common usecases and user expectations. To avoid this, add a dependency on the kernel deploy to image do_build tasks. This should avoid any circular dependency issues but equally ensure users have their expectations met. [YOCTO #5581] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-29base/gcc-common: Ensure umask setting is consistent for shared workdirRichard Purdie1
gcc has cross and target components with a shared workdir. The unpack umask settings need to match for all of these. We need to use strings in each case to ensure the sstate code matches them correctly. This patch tweaks various things to ensure the change adding the unpack umask change doesn't break the compiler builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-27base.bbclass: Set umask 022 also for do_unpack taskMartin Jansa1
* when git checkouts files from fetched clone it respects system umask and creates files with different permissions, if such files are copied to packages, resulting target images have also different permissions on them. * we need reproducible builds across different builders with different system umask, so set 022 umask [YOCTO #5590] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-27module-base: Fix misleading commentRichard Purdie1
The comment was originally written for module.bbclass and is now slightly misleading. This updates it to match the current code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 12:27:19 +0000