| Age | Commit message (Collapse) | Author | Files |
|---|
|
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, and
sstate_create_package stores SSTATE_BUILDDIR into a archive file by
tar, these two task can be run simultaneously for different packages,
and make a hardlink for a file will lead to the change of the links
number of file, and if tar is reading this file, it will fail with exit
code 1, and report "file changed as we read it":
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
4b3e353a5[sstate.bbclass: fix parallel building issue] tries to use the
tar parameter --ignore-failed-read to fix, but it does not work, and
tar parameter --warning=no-file-changed can close the warning, but can
not change the exit code. so close shell immediate exit, only fail
if tar returns not 1 and 0.
Exit codes of tar:
http://www.gnu.org/software/tar/manual/html_section/Synopsis.html
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, then
sstate_create_package will store SSTATE_BUILDDIR into a archive file by
tar, but once other packages install the same file into sysroot, the
creating the archive file will fail with below error:
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
This kind of error is harmless, use --ignore-failed-read to ignore it.
The error in tar occurs when the timestamp of the file changes and this
can happen when the number of symlinks change. The file will be included
in the archive.
[YOCTO #5122]
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ant reported on irc that the sstate absolute to relative symlink creation
code wasn't working in klibc. He was correct although the level of breakage is
rather surprising since it only worked for one level of symlink (usr/include) with
everything else being broken.
The reason is probably that nothing really uses absolute paths, we use relative
paths where at all possible already. Nothing in the target sysroot should use
absolute paths for a start. In this regard, the klibc-dev package is broken and
needs fixing. It will currently break when building for one machine, then switching
to another of the same TUNE_PKGARCH and installing from sstate but that is a
separate issue.
This patch fixes the symlink creation code by firstly passing in the correct
value we need (where the symlink will end up) and seccondly, actually using it.
I've also tweaked the debug message to contain appropriate information and got
right of the double "//" value the existing code created in favour of the form
'./..' which looks neater.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_NO_NETWORK disables any fetching, however if we're using an external
sstate cache, we may want to be able to fetch those objects even if we are
not fetching the upstream sources. Denote this situation by setting
SSTATE_MIRROR_ALLOW_NETWORK in local.conf. When it is found, for sstate
cache fetches, mask off BB_NO_NETWORK for the local function.
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This avoids unnecessary duplication of setup. The only visible change in
behavior will be the case if siginfo exists and the archive does not, in which
case it'll redownload both, but this doesn't seem unresasonable to me,
particularly since the archive is downloaded first, making this case
particularly unlikely.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default FILESPATH isn't really of use, as we don't expect to find sstate
archives buried in layer recipe directories, and the default MIRRORS is
intended for use for fetching SRC_URI, not sstate.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
dependencies
The do_package_setscene task needs to depend on fakeroot in order to correctly
install its files.
We can whitelist the dependency in the sstate handling code for some
performance improvements since we only need this if we're installing the
package from sstate.
Also use an append operator in base.bbclass for clarity.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sstate has a logic to fixup hardcoded paths in scripts,
but it misses in some specific cases, so add
EXTRA_STAGING_FIXMES to the fixup hardcoded paths
mechanism, so that we can specify what hardcoded paths
need to be fixed in a recipe, e.g.
EXTRA_STAGING_FIXMES = "STAGING_BINDIR_TOOLCHAIN"
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In python 3 print is a function call. In some cases bb.note is a more
appropriate call to make.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make hard links for staging files instead of copy to save the disk space
(3G will be saved for a core-image-sato build), and it doesn't affect
much on the build time.
The following directories are affected:
1) The sysroot
2) The DEPLOY_DIR
3) The pkgdata
[YOCTO #4372]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Otherwise we might end up creating directories under sstate-cache with whatever
random umask has been selected for the task that we're trying to package. This
would be a bad thing since it might result in losing group write access for
newly created dirs, and/or losing group read access for the sstate files
themselves.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If no files have been staged we want to continue without error instead
of showing a traceback.
Fixes [YOCTO #4056].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Under some conditions (ACLs enabled, NFS) mv can interactively prompt
before overwriting files. Avoid hanging builds in that case by using
-f which should be harmless in other cases.
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case filenames have spaces, execution of the function
sstater_install will hang, so the print parameter %s must be
enclosed with quotes.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When checking the dependencies in setscene_depvalid(), make sure we also
consider those dependencies needed when running the postinstalls on
host.
[YOCTO #3918]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This directory is cleaned upon completion however if a previous build
crashes, it can lead to corrpution, hence ensure its clean at the start
too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
optimisation
Add a function which copys a tree as a set of hardlinks to the original
files, then use this in sstate to reduce some of the overhead of sstate
package creation since the file isn't actually copied.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The same log message gets output multiple times in the log which look
confusing and is rather pointless. Move the log message to the correct
level.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
useradd.bbclass adds sstate dependencies on base-passwd, shadow-native and
shadow-sysroot. Due to the way these are injected, they interact badly with
the other dependency validation logic and end up pulling in dependencies we
don't actually need. This patch adds code to optimise those cases out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
as it is not supported.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Specify dirs in which the shell function "sstate_create_package" and
"sstate_unpack_package" are executed and don't use ${B} as default dirs
to avoid possible race with task do_rootfs at deb image creation time.
[YOCTO #3674]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you change a machine to a different package architecture, you will see sstate
errors about overwriting files as the code stands today. Instead it should clean
out the files safely and correctly. This patch changes the naming of stamp-extra-info
manifest files to avoid this problem. It will potentially trigger warnings during
builds in existing TMPDIRs until the system adjusts to the new naming, these are
harmless.
[YOCTO #3521]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code was written before SSTATETASKNAMES existed. Since it
does exist, lets simply the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This would be useful for doing siginfo compares to understand why a build
is not reusing something when using SSTATE_MIRROR. No error will be reported
if it fails to find the .siginfo file
[YOCTO #2898]
[RP: Small tweaks]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* without this patch:
Python 2.7.3
>>> sstate_search_cmd = "grep -rl /OE/jansa-test/shr-core/tmp-eglibc/pkgdata/armv7a-vfp-neon-oe-linux-gnueabi/runtime-reverse/vim-common /OE/jansa-test/shr-core/tmp-eglibc/sstate-control --exclude=master.list | sed -e 's:^.*/::' -e 's:\.populate-sysroot::'"
>>> cmd_array = sstate_search_cmd.split(' ')
>>> search_output = subprocess.Popen(cmd_array, stdout=subprocess.PIPE).communicate()[0]
grep: |: No such file or directory
grep: sed: No such file or directory
* Adding shell=True and using cmd string instead of array makes it work:
>>> search_output = subprocess.Popen(sstate_search_cmd, shell=True, stdout=subprocess.PIPE).communicate()[0]
>>> print search_output
manifest-armv7a-vfp-neon-gvim.package
manifest-armv7a-vfp-neon-vim-tiny.package
manifest-armv7a-vfp-neon-vim.package
But still isn't 100% reliable, I guess it's caused by some other package
being removed from sstate while grep is already running.
So sometimes grep can show error on STDERR
>>> search_output = subprocess.Popen(sstate_search_cmd, shell=True, stdout=subprocess.PIPE).communicate()[0]
grep: /OE/jansa-test/shr-core/tmp-eglibc/sstate-control/manifest-armv7a-vfp-neon-systemtap.package: No such file or directory
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The value of subprocess.Popen().communicate()[0] is a string.
Checking for '!= None' will always match causing bogus warnings
regarding already staged files.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently there is some odd behaviour of the packagegroup class in relation
to sstate since it sets PACKAGE_ARCH = "all" but does not use the allarch class
leading to it being undetected by sstate.
Previously it was not possible to use allarch as the recipe couldn't "undo"
settings made by the allarch class. Since this no longer happens when
PACKAGE_ARCH != all, we can use the allarch class.
This patch also fixes up one case we need to preserve TRANSLATED_TARGET_ARCH
and ensures sstate only assumes allarch when PACKAGE_ARCH is "all".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clean up and clarify the populate_sysroot task dependencies. Target sysroot
packages do need their dependencies installed, as do some target/cross
relationships. We can whitelist the *-initial dependencies as these are
never needed indirectly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For example gcc-cross depends on linux-libc-headers and needs it to be present
to build/work correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
of some sstate installation
This is a first attempt at logic to determine when a sstate dependency needs
to be installed and when it does not. Its a start at the logic and errs on the
side of caution, as it gets wider testing, we can refine the logic as needed.
This code should allow a significant performance speedup to certain workflows, for
example "bitbake xxx-image -c rootfs" will not populate the target sysroot.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recent preveeding sstate directory layout fixes made the code do what it
was originally intended to do, as can be clearly seen from the code.
Unfortunately this changed the contents and layout of the sstate files
themselves since the bug was leading to a directory prefix being missing.
This is now resulting in chaotic messages on the console since things
are getting confused with the two different layouts. The simplest way to
resolve this is to bump the version number, hence moving the new layout
into its own new namespace.
Its worth noting that whilst the failure messages are scary, the failure
mode is relatively harmless since it will just fall back to building the
data rather than installing from sstate.
Usually I'd give more notice of a change like this but under the
circumstances, I'm just going to push this in to resolve the failures
people are seeing. Initially I thought the problem was limited to
some of the -cross packages and therefore of low impact but that is
clearly not the case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix missing parameter to endswith and pass paths through normpath to remove
any duplicate "/" characters which would corrupt other calls like basename.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The manifest file can become corrupted if sstate-inputdirs and sstate-outputdirs
don't have matching endings. This patch ensures that even if set incorrectly,
the code functions as intended, thereby handling manifest corruption safely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Present the manifest file that contains the matches for
files being installed to a location that already contains
that file. This will help to determine which is the correct
recipe to fix when this occurs.
[YOCTO #3191]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Now do_package isn't machine specific, we're only left with do_populate_sysroot as a
machine specific task. This change marks only the machine specific manifests as machine
specific, defaulting to PACKAGE_ARCH for everything else.
This means we do less work where there are multiple machines using the same
core package architecture and we can start to clean up the sstate duplicate files
whitelist.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've noticed failures on the project autobuilders where a shared sstate
directory is used across multiple builders and the clocks become skewed.
Most of the time this causes harmless building but if this happens where
an environment is changed (make install vs make in qt4-x11-free for example),
the build can fail.
This avoids modification times in the future and should make builds safer
in shared environments sstate was designed for.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids errors where gcc/binutils get installed to the native sysroot
in the same location for multiple package architectures. Ultimately making
these native recipes with ${PACKAGE_ARCH} appended to PN will resolve this
but hide the warnings until this gets sorted out.
Also hide the python and docbook catalog warnings since they're known about,
nothing to worry about and we'll aim to clean them up properly in the 1.4 cycle.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, path components like // could break comparisions with the whitelist leading
to warnings being displayed to the user unintentionally.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
