| Age | Commit message (Collapse) | Author | Files |
|---|
|
* rootfs_*.bbclass doesn't use this variable anymore, so we can drop it
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no real reason to have these separate files any longer. It does
mean in meta-toolchain type recipes some extra variables are defined but
it also means the common code can be grouped and maintained together
which I believe is more beneficial. We therefore merge the classes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A bit uncertain on where to put this, suggestions welcome.
Needed to automatically rebuild do_rootfs when PACKAGE_FEED_URIS
change.
Signed-off-by: David Nyström <david.c.nystrom@gmail.com>
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This commit will:
* remove old bash code common to all backends;
* create a new do_rootfs() python function that will use the new
rootfs/image creation routines;
* allow creation of dpkg based images;
* fail for rpm/opkg (not implemented yet);
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Fixing the following warning:
WARNING: Variable rootfs_deb_bad_recommendations contains tabs, please remove these (/srv/ssd/sgw/poky/meta/recipes-extended/images/core-image-lsb-dev.bb)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When preping a read-only rootfs and finding some post-install
scripts that can not be run, list the names of said scripts to
avoid having to look around the rootfs to find a list.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
become a bitbake keyword
There is a good chance we might want to support a bitbake operator
"_remove" which works in a similar way to _append and _prepend. As
such, we can't use those keywords in function or variable names.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE. Also add a
warning that ensures users know that BAD_RECOMMENDATIONS support is
not implemented in the debian package/rootfs classes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch adds the following helper functions:
* delayed_postinsts - outputs the list of delayed postinstalls;
* save_postinsts - this will save the delayed postinstalls for ipk/deb
in /etc/(ipk|deb)_postinsts;
* rootfs_remove_packages - removes packages from an image;
Additionaly, this patch will remove a piece of code in
rootfs_ipk_do_rootfs which will be moved to image.bbclass and used for
all backends;
[YOCTO #4484]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
SDKs are constructed in a similar manner to images, and the contents can
be influenced by a number of different factors, thus tracking the
contents of produced SDKs when buildhistory is enabled can help detect
the same kinds of issues as with images.
This required adding POPULATE_SDK_POST_HOST_COMMAND and
SDK_POSTPROCESS_COMMAND variables so that data collection functions can
be injected at the appropriate points in the SDK construction process,
as well as moving the list_installed_packages and
rootfs_list_installed_depends functions from the rootfs_{rpm,ipk,deb} to
the package_{rpm,ipk,deb} classes so they can also be called during
do_populate_sdk as well as do_rootfs.
Implements [YOCTO #3964].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bitbake -S <image> has errors, e.g.:
NOTE: Reparsing files to collect dependency data
ERROR: Bitbake's cached basehash does not match the one we just generated
(/buildarea/lyang1/poky/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8e44f2296f2d6cdf2ccb0236910ef59b and
46357d5e36713646b47b0fe2233e3c8c
This is caused by the BUILDNAME which is defined in cooker.py:
if not self.configuration.data.getVar("BUILDNAME"):
self.configuration.data.setVar("BUILDNAME", time.strftime('%Y%m%d%H%M'))
The time changes during the first parsing and reparsing, so there is the
error, we already have:
do_rootfs[vardepsexclude] += "BUILDNAME"
but what we need is
rootfs_xxx_do_rootfs[vardepsexclude] += "BUILDNAME"
The do_rootfs doesn't depend on BUILDNAME directly, but indirectly, the
depends tree is:
do_rootfs -> rootfs_xxx_do_rootfs -> BUILDNAME
So add BUILDNAME to rootfs_xxx_do_rootfs[vardepsexclude] would fix the
problem.
[YOCTO #3299]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove package run-postinsts from ROOTFS_PKGMANAGE. run-postinsts has
already added in ROOTFS_PKGMANAGE_BOOTSTRAP and then added to rootfs
conditionally by checking image feature "package-management".
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
ROOTFS_POSTPROCESS_COMMAND
Since the intercept fall-back procedure will change the package
installation status, do the checking after ROOTFS_POSTPROCESS_COMMAND
ends.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there are postinstall scripts to be run on first boot and
IMAGE_FEATURES contains "read-only-rootfs", we know this will fail on
the target device so just error out during do_rootfs. This check was
already implemented for ipk, so add it to the deb and rpm backends. Also
make all backends use bberror rather than just echo to display the
error.
Fixes [YOCTO #3407].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* I have kernel recipe which depends on other recipe to build tiny initramfs
image, without this change it rebuilds not only that initramfs image
but also whole kernel when DATE or TIME is changed and OEBasicHash enabled
* also resolves ERROR shown when bitbake -S is used for image:
ERROR: Bitbake's cached basehash does not match the one we just generated
(/OE/oe-core/openembedded-core/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8c35cdf8a5d09c03941f081dd9f6d8dc and b5d6e2e5952770557c48c5779ddb73fc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In order for the postinst scriptlets to be able to run once we need to
export the location of the intercept scripts and also the location of
native sysrootfs. The gdk-pixbuf binaries will need the latter because
in order to generate the loaders.cache it will need to scan some shared
libraries that must be native. Even though the output is a text file.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* There would be race issue if we put the lock to the WORKDIR, for
example:
bitbake core-image-sato core-image-sato-sdk
If the lock is in their own WORKDIR, the apt-rootfs.conf and
Packages.gz maybe be written by two tasks at the same time, which
would cause unexpected errors.
* Create ${target_rootfs}/etc since the "tar -C" needs it.
Note:
* The rpm has put the lock to DEPLOY_DIR_RPM
* The ipk doesn't need it since it has locks for each deploy directory
and put the opkg.conf in his own WORKDIR, which doesn't like deb put
the apt-rootfs.conf in ${STAGING_ETCDIR_NATIVE}/apt/.
[YOCTO #2495]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
It turns out "apt-cache showpkg" does return some information when a
package does not exist but another package recommends it, which can
occur for empty *-dev packages; so use "apt-cache policy" with a
different line count instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When building an image recipe, you can now build a companion SDK by
calling the populate_sdk task:
bitbake -c populate_sdk core-image-minimal
Note: there are still issues w/ the SDK not working completely with
multilibs.
A lock is required between rootfs and populate_sdk activities to prevent
configuration file clashes and similar package management problems in ipk
and deb based systems. (RPM already had a lock for a different reason.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Let each package-specific rootfs implementation provide basic functions
to query the existence of a package and install a list of packages and
then have a generic install function so this logic is in one place.
Note: unlike previous versions of this code in OE-Core this uses the
IMAGE_LINGUAS variable and not IMAGE_LOCALES - note that IMAGE_LINGUAS
was what was used in OE-Classic and it is already used in OE-Core in
order to install locale-base-*. This will mean that if IMAGE_LINGUAS is
left at the default you will now get more packages installed. If you
don't want these language support packages then you should set
IMAGE_LINGUAS explicitly.
This restores locale installation to the same state as OE-Classic, only
we now support all the packaging backends.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Implement the functions required for buildhistory to be able to query
installed packages, get dependencies etc. for deb-based images.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1086]
The pach was backported from OE:
http://git.openembedded.net/cgit.cgi/openembedded/commit/?id=41e0fbf792037f249d1b8d283b3de81718887c9f
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
package_deb.bbclass:
1. Added new function package_update_index_deb() to generate package
index files.
2. Added new function package_install_internal_deb() to install a list
deb packages to a specified root directory, with the specified package
architecutre information.
rootfs_deb.bbclass:
Used the above new functions to install the rootfs.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
Move function rootfs_xx_log_check() from rootfs_xx.bbclass to relevant
package_xx.bbclass. (Where xx is rpm/ipk/deb).
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
This address [BUGID #401] to complete dpkg rootfs support
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
This fixes [BUGID #360] parsing failure when using package_dep
as rootfs generator.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
commit 1d0757f16beb31551733d9d755d72337ccda9642 changes opkg run state from
/usr/lib/opkg to /var/lib/opkg, which however is incomplete and still many
important information is kept under old directory including postinst methods.
This makes latest boot into a mess.
So finalize this movement to /var here. Fix [BUGID #229]
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
|
|
populate_staging task to populate_sysroot
This change makes the purpose of the staging directory more obvious and
the taskname more true to what it now actually does.
The layout version number is increased due to the change in layout
but code to convert existing directories and insert a symlink for
backwards compatibility is included.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
built
|
|
apt-ftparchive anymore
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4749 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
TARGET_ARCH since it breaks x86
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4520 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
by making it an image feature
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4517 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4511 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
rootfs generation
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4506 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4043 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3119 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3074 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2630 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
packaging type means the new type of packages are automatically generated.
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2526 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
was hosed
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2508 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2506 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2505 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2380 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
