summaryrefslogtreecommitdiff
path: root/meta/classes/package_rpm.bbclass
AgeCommit message (Collapse)AuthorFiles
2011-11-26getVar/setVar cleanupsRichard Purdie1
Complete the bb.data.getVar/setVar replacements with accesses directly to the data store object. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-18package_rpm: Set _tmppath to avoid races over tmp filesRichard Purdie1
Occasionally we keep seeing "unable to open temp file" messages during do_package_write_rpm tasks. This appears to happen when multiple processes are writing rpm files and is likely due to using the shared system temp directory. This patch changes the tmp path to the package work directory meaning conflicts should become a non-issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-11rootfs_rpm.bbclass: Enable pre and post install scriptsMark Hatle1
[YOCTO #1755] We change the want the RPM rootfs install works to install pre and post install scripts. The new method uses a script helper that is invoked by RPM outside of the normal chroot. The wrapper is dynamically generated prior to the install starting. It will check the return code of the script. If the script fails, it will store a copy to be executed on the first system boot. This is similar to the previous mechanism. In addition, a line of debug was added to the scripts as written by package_rpm to list which package and which script for later debugging, if necessary. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-11-10Convert to use direct access to the data store (instead of bb.data.*Var*())Richard Purdie1
This is the result of running the following over the metadata: sed \ -e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \ -e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -i `grep -ril bb.data *` Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-10classes: Remove various bashismsRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-09classes/package_rpm: disable uninstall scripts for upgradesPaul Eggleton1
Our current assumption (based on the behaviour of opkg) when writing recipes is that prerm and postrm do not get called during an upgrade. When using rpm however, these are mapped to the rpm "preun" and "postun" events which occur after postinst for upgrades, and when these contain removal type operations (such as update-alternatives --remove) this causes problems. This patch wraps each preun and postun script for rpm in a check that determines whether or not the script is being called during an upgrade, and skips the entire script if it is, which mimics the behaviour of opkg under the same conditions. Fixes [YOCTO #1760] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-11-08multilib: Drop MULTILIB_IMAGE_INSTALLDongxiao Xu1
There should just be a single IMAGE_INSTALL variable. If the package backends need this split into different multilib components they should be responsible for doing this, not the user. This commit removes the MULTILIB_IMAGE_INSTALL variable. [YOCTO #1564] Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-10-04package_rpm: Ensure multilib code is only called in the multilib caseRichard Purdie1
This fixes some error messages in the do_rootfs logs of non-multilib builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-28multilib: add MLPREFIX to deploy folderDongxiao Xu1
Add MLPREFIX to multilib deploy forlder to avoid the confliction between multilib and normal package deploy directory. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-28package_rpm: combine normal and multilib solution manifest togetherDongxiao Xu1
When RPM does the real install, if the first manifest file is empty, the installation will stop without handling the second manifest file. Merge the two manifest files together to fix this issue. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
2011-09-22rootfs_rpm: two step installationDongxiao Xu1
Firstly we install a base image. Then install those multilib packages listed in MULTILIB_IMAGE_INSTALL. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Acked-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-21Fix RPM dependenciesMark Hatle1
When packaging for RPM, dependencies were not being properly added to the packages. Only the "providing" dependencies were added due to a typo. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-09-21multilib: install MULTILIB_IMAGE_INSTALLDongxiao Xu1
If user set MULTILIB_IMAGE_INSTALL, we need to install those multitlib packages into the final image. Also fix the logic in handling multilib prefix. For certain case like a normal image contains several multilib libraries, the image recipe isn't extended with MLPREFIX, therefore we need to enumerate the possible multilib prefixes and compare them with package prefixes. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
2011-08-16package_rpm: Fix package rename issue in multilib caseDongxiao Xu1
do_package task will write information into pkgdata and do_package_write_rpm will read them out. Take lib32-dates as an example, one of its RDEPENDS is li32-gtk+, and PKG_lib32-gtk+ = "libgtk-2.0", these info is stored at: tmp/pkgdata/x86_64-pokymllib32-linux/runtime/lib32-dates. Function "mapping_rename_hook" in do_package_write_rpm is to handle those renamed packages. However before it executes, translate_vers has stripped the multilib prefix out, making it failed to find PKG_gtk+ value in pkgdata. This commit moves the strip_multilib out of translate_vers and call it after "mapping_rename_hook". [YOCTO #1368] CC: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2011-08-16package_rpm: enhance strip_multilib functionDongxiao Xu1
The previous logic could only strip MLPREFIX from the first element in an array, take an example, strip_multilib the [lib32-a lib32-b lib32-c] will result in [a lib32-b lib32-c]. We need to strip prefix one by one. This commit change the logic to strip all elements' multilib prefix. [YOCTO #1368] CC: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
2011-08-12package_rpm: Fix attemptonly and suggest packagesMark Hatle1
[YOCTO #1325] [YOCTO #1366] Packages that were in the PACKAGE_ATTEMPTONLY and SUGGESTS were not being properly found, which was causing image creation failures. In PACKAGE_ATTEMPTONLY, when an item was not found, it caused an error. This should have been a note, followed by skipping the package. The SUGGESTS processing was simply broken. It was using a non-existant function, due to an apparently typo. In addition to the above, the MLPREFIX processing was not being done properly, preventing multilib packages from working in this with PACKAGE_ATTEMPTONLY. (SUGGESTS doesn't need this as the names are munged when creating the packages.) Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-08-12package_rpm.bbclass: Update the platform config and --targetMark Hatle1
When constructing the /etc/rpm/platform file, we need to ensure that the any, all, and noarch platforms will allow any "linux" variant to be installable, not just matching variants.. i.e. arm-oe-linux-gnueabi should be able to install noarch-oe-linux Also ensure that we pass the full canonical arch via the --target= parameter. This allows us to define the proper platform settings for all packages. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-08-11Magic file path should be given for rpmbuildjani.uusi-rantala@nokia.com1
From d54b975506c392cfb59dbb3caf313ac061b6fa01 Mon Sep 17 00:00:00 2001 From: Jani Uusi-Rantala <jani.uusi-rantala@nokia.com> Date: Thu, 11 Aug 2011 18:37:56 +0300 Subject: [PATCH] Magic file path should be given for rpmbuild in _rpmfc_magic_path define so that build system default file is not used by accident. Not doing this caused many packages to fail building in several systems. Fixes [YOCTO #1358] Signed-off-by: Jani Uusi-Rantala <jani.uusi-rantala@nokia.com>
2011-08-03package_rpm: Ensure alternatives links are reflected in rpm package dependenciesRichard Purdie1
Currently, if a file is provided as an alternative link within the package, rpm doesn't see the dependency. This works out badly for dependencies such as /bin/sh which scripts might require. Since rpm detects and adds these dependencies we do need to ensure the dependency information in the packages is correct. This patch does so for the rpm backend ensuring internal consistency whilst the approach for addressing this problem in the other package backends is considered. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-02bitbake.conf: Add SDK_PACKAGE_ARCHSMark Hatle1
Add SDK_PACKAGE_ARCHS to avoid the sed operations we were previously doing inside of the variouns populate_sdk functions and related items. Also add documentation to populate_sdk to explain when the various functions are expected to be doing. Finally fix a bug in populate_sdk_rpm where the wrong value was being set, noticed while working on this change. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-08-02rootfs_rpm: Cleanup and minor bug fixesMark Hatle1
in packages_rpm.bbclass: Cleanup the way package_update_index_rpm works. Break this out into two functions, one for common functionality and one for controlling target vs sdk package processing. Similar change to package_generate_rpm_conf. Usage of IMAGE_ROOTFS should actually be "target_rootfs", this fixes a problem with the SDK case. in rootfs_rpm.bbclass: Minor re-order of the values, and avoid multiple uses of IMAGE_ROOTFS in order to make the merge with the SDK behavior easier. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-08-01package_rpm.bbclass: fix one typoYu Ke1
fix the MLPREFIX referrence typo which cause multilib rpm do_rootfs failure CC: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-01package_{deb, rpm, ipk}.bbclass: fix 'lingusa' typoKoen Kooi1
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
2011-07-27package_rpm.bbclass: Fix mistake reported by Mark HatleRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-07-27package/rootfs_rpm: Implement RPM multilib package handlingMark Hatle1
This is a first pass at adding multilib support to the RPM package and image handling code. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23classes/package_rpm.bbclass: Change the way the PV is transformedMark Hatle1
There were some odd instances where the PKGV could not be loaded in the old way. Change to verify that PKGV exists before attempting to retrieve the value from the key. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23classes/package_rpm.bbclass: Enhance diagnostic messagesMark Hatle1
We clearly state now if we are: * Skipping an empty package * Creating a (full) package * Creating an empty package Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-06package_rpm.bbclass: make RPM use on-disk permissionsScott Garman1
Instruct RPM to use the on-disk permissions, owners, groups, and directory permissions, instead of defaulting to root:root Code changes suggested by Mark Hatle. Signed-off-by: Scott Garman <scott.a.garman@intel.com>
2011-05-27classes/package_xxx.class: Use PKGE/PKGV/PKGR.Lianhao Lu1
Use PKGE/PKGV/PKGR to build various package feed in tasks of pacakge_write_xxx. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2011-05-20Move packagedata code into oe.packagedata (sync from OE)Chris Larson1
Signed-off-by: Chris Larson <chris_larson@mentor.com>
2011-05-20package-index.bb: add support for deb and rpm.Dexuan Cui1
[YOCTO #1024] Currently package-index.bb only supports ipk. This commit adds the support for rpm and deb, too. ------------------------------ How to generate and use repos: 1) run "bitbake package-index" after building some target, e.g., core-image-sato-sdk; 2) export ${DEPLOY_DIR_RPM}, ${DEPLOY_DIR_IPK} and ${DEPLOY_DIR_DEB} by a webserver on the host, assuming the host IP is 192.168.7.1, at http://192.168.7.1/rpm http://192.168.7.1/ipk http://192.168.7.1/deb 3) inside the target, according to the packaging system (rpm, ipk or deb) used when we generate the target image, we can use different ways to manage packages: 3.1) RPM run "zypper addrepo http://192.168.7.1/rpm main; zypper refresh" to retrieve info about the repo; next, we can use "zypper install/remove" to manage packages. 3.2) IPK add the repo info into opkg config file, i.e., in /etc/opkg/arch.conf, we can add something like "src i586 http://192.168.7.1/ipk/i586", and next, we run "opkg update" to make opkg update the list of available packages. And later, we can use "opkg install/remove" to manage packages. 3.3) DEB Currently in target, some important config files, like /var/lib/dpkg/status and /etc/apt/sources.list, for deb/apt are missing. So we can't install/remove package in target at present. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
2011-05-10package_rpm: use target vendor informationAdrian Alonso1
* Instead of hardcoding target vendor string "-poky" use TARGET_VENDOR information in case of using external toolchains Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
2011-03-29package_rpm: Ensure we take the sstate shared lockfile in the place we write ↵Richard Purdie1
files The point we need to take the lock is when the rpm files are written into the deploy rpm directory. Since sstate makes the actual installation of the files, that is the point we need to take the lock. This also stops the deploy/rpm directory being accessed for a lock before it exists. [YOCTO #797] [YOCTO #925] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-03-10package_rpm: Fix rootfs generationMark Hatle1
[YOCTO #797] During rootfs generation, if other RPM packages are being wrtten this could cause a failure during the solvedb generation. We add a shared lock around the RPM package building. This will allow multiple RPM packages to continue to be written at the same time, but prevent rootfs generation and RPM package generation at the same time. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-03-01rootfs_rpm: Fix rootfs generation using RPM packagesMark Hatle1
[BUG #756] Fix bug #756. The rootfs contains a control file /etc/rpm/platform that specifies the default system platform, as well as patterns for compatible architectures. This file was not being setup properly due to a misunderstanding of the format in a previous patch. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-02-16package_rpm: Fix solverdb generationMark Hatle1
The RPM solverdb was potentially being generated multiple times. Fix this by ensuring we only process each directory once. Also correct an issue where the solution did not necessarily follow the preferred architecture ordering, reverse the default Poky ordering so that preferred is listed first. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-02-16rpm: Add the ability to use the platform file during installMark Hatle1
Add a new rpm macro, rpmrc_platform_path to specify an alternative platform file. This is required to allow the dep resolver to identify compatible packages. Also workaround a minor problem with the --showrc command in RPM. A bug has been reported upstream on this. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-02-01rootfs_rpm/package_rpm.bbclass: Move func from rootfs_rpm to package_rpmLianhao Lu1
package_deb.bbclass: 1. Modified package_update_index_rpm() and package_generate_rpm_conf() to generate sperate depsolver db and rpm configuration, for target packages and host packages respectively. 2. Added new function package_install_internal_rpm() to install a list deb packages to a specified root directory, with the specified package architecutre information. 3. Added new function resolve_package_rpm() to resolve package names to filepaths. rootfs_deb.bbclass: Used the above new functions to install the rootfs. [sgw: merged changes for createrepo] Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-01-31image/package_xx/rootfs_xx.bbclass: move rootfs_xx_log_check().Lianhao Lu1
Move function rootfs_xx_log_check() from rootfs_xx.bbclass to relevant package_xx.bbclass. (Where xx is rpm/ipk/deb). Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2011-01-30package_rpm: Fix package-split summaryMark Hatle1
The package-split summaries were being pulled in from the main package, not the split package metadata. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-01-28rpm: Uprev to RPM 5.4.0Mark Hatle1
Update RPM to the latest release, RPM 5.4.0. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-10-22classes: Only enable fakeroot on setscene tasks with packagingRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22pseudo/fakeroot: Move the pseudo directory creation into bitbakeRichard Purdie1
If sstate was used to accelerate a build, the pseudo directory might not have been created leading to subsequent task failures. Also, sstate packages were not being installed under pseudo context meaning file permissions could have been lost. Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures exists before running tasks and running the appropriate setscene tasks under fakeroot context. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22package_rpm: Don't check for the existence of dvar as its never usedRichard Purdie1
If a sstate package exists for the package task but not for the rpm packaging task, the output from the package task will be used. The directory pointed to by dvar will not exist under this scenario. Since the directory is never used by the packaging process remove the check, substituting the pkgd variable which is always present and used. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-11Add Summary/Description support to packagingMark Hatle1
[BUGID #281] Add the ability for the deb, ipk and rpm classes to use the new summary and description fields. The Description is wrapped around 75 characters to ensure a reasonably nice, presentable description. (Summary defaults to the description if Summary is not defined.) Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-10-11package_rpm: Disable nativesdk/canadian package indexes for now as these are ↵Richard Purdie1
being incorrectly used for target rootfs generation, breaking the images Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-05Revert "classes: Disable setscene tasks for initial testing"Richard Purdie1
This reverts commit 084ec86402bba92418898a4c47667a0574a3b3ee.
2010-09-03rpm: Fix autoconf/libtool usageMark Hatle1
In order to resolve a host-contamination problem, we re-work the way that autoconf and friends are invoked during the compilation of RPM. This has a side effect of fixing another bug where RPM was being renamed HOST_ARCH-HOST_OS-rpm. So we remove the "fixes" for that behavior as well. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-09-03roots_rpm: Enable installation of recommended packagesMark Hatle1
Within RPM there is a field called "Suggests". This filed behaves like "Recommends" does in ipk. So we write out the packages using the Suggests field with the Poky 'Recommends' values... and then use the arbitrary tags to capture the Poky 'Suggests' within a new "Recommends" tag. Slightly confusing, but the end result is a functioning install. Also some performance enhancements were add at the same time. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-09-03package_rpm: Start packaging directoriesMark Hatle1
Match ipkg behavior and unconditionally include directories in the packages Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 15:28:01 +0000