| Age | Commit message (Collapse) | Author | Files |
|---|
|
The package_write task was previously removed. Remove a remaining superfluous
reference to it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The reasons this task was introduced are lost in the mists of time. It
allowed for the a single "package_write" task instead of spelling out
the explicit package backends, however in all but one case we do that
anyway.
As such as might as well give in and delete the task, converting that
single reference into explicit dependencies.
This gives bitbake a bit less work to to when processing the runqueue
since there are less tasks (but more dependencies in some cases).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Package indexing is done in python and package-index.bb uses the new
routines.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default value for HOMEPAGE of "unknown" has been in place since the
early OE-Classic days, but it doesn't really make sense - "unknown" is
not a valid URL and it just means we have to explicitly check for this
hardcoded string if we're displaying the value in some form of UI, such
as Toaster.
This has required some changes to the packaging classes as they
previously did not expect the value to be blank.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit cleans up the functions that were ported to python.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
If the packages are created from cache, we need to remove the stamp so
that we re-generate the index files at do_rootfs time.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Additional metadata from user-defined variable is written into
control/spec file of binary package.
Three variables are searched for adiitional package metadata:
* PACKAGE_ADD_METADATA_<PKGTYPE>_<PN>
* PACKAGE_ADD_METADATA_<PKGTYPE>
* PACKAGE_ADD_METADATA
First found variable with defined value wins.
<PN> is a package name. <PKGTYPE> is a distinct name of specific
package type:
* IPK for .ipk packages
* DEB for .deb packages
* RPM for .rpm packages
Variable can contain multiple [one-line] metadata fields separated by
literal sequence '\n'. Separator can be redefined through variable flag
'separator'. In package control/spec file separator is replaced by
newline character.
Signed-off-by: Leonid Borisenko <ive.found@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When originally developed, it was thought a task may have more than one associated
sstate archive. The way the code has grown that idea is now not possible or needed.
We can therefore assume one sstate archive per task and drop the crazy name
mapping code. Simpler is better in this case.
The downside is that various sstate archives will change name so this forces a cache
rebuild. Given the other sstate changes going in at this time, this isn't really
a bad thing as things would rebuild anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you Ctrl+C ppackage_write_{deb/ipk} control files can get left lying around
and make it into another packaging format. This ensures we cleanup all known
control files before starting packaging. We can simplify some of the globbing
as a result.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This uses the new --add-exclude arguments in opkg-cl, to list the excluded
packages.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Uses the opkg --no-install-recommends option.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The recipe's DESCRIPTION is wrapped automatically by textwrap, make it
support newline ("\n") to let the user can wrap it manually, e.g.:
DESCRIPTION = "Foo1\nFoo2"
In the past, it would be:
Foo1\nFoo2
Now:
Foo1
Foo2
[YOCTO #4348]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Back in 2010, I added these in commit: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=36f1ae42fe13dae174b7fb5eb85dc49d7d7b516b
however the package_write tasks sstate only consists of package files and no
fakeroot privileges are needed to write these out, only originally create them.
We can therefore drop these for some small performance gains and a less
convoluted depenency chain.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are various bits of cruft that have built up around our file accesses. This patch
cleans some of them up, specifically:
* Remove pointless "from __builtin__ import file"
* Use open(), not file()
* Wrap file usage in a with container to ensure files are closed
* Add missing .close() calls in some cases
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The postinstall for the opkg run-postinst hook checks for the existence of this
file. We therefore ensure it always exists during image generation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes build failures introduced with "classes/buildhistory: implement history
collection for SDK" by moving the functions to files where only the specific image
type which is enabled is inherited. The failures occured when multiple PACKAGE_CLASSES
were enabled.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDKs are constructed in a similar manner to images, and the contents can
be influenced by a number of different factors, thus tracking the
contents of produced SDKs when buildhistory is enabled can help detect
the same kinds of issues as with images.
This required adding POPULATE_SDK_POST_HOST_COMMAND and
SDK_POSTPROCESS_COMMAND variables so that data collection functions can
be injected at the appropriate points in the SDK construction process,
as well as moving the list_installed_packages and
rootfs_list_installed_depends functions from the rootfs_{rpm,ipk,deb} to
the package_{rpm,ipk,deb} classes so they can also be called during
do_populate_sdk as well as do_rootfs.
Implements [YOCTO #3964].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tclibc file for uclibc already empties IMAGE_LINGUAS, so there's no point
to this conditional as far as I can tell, and it can cause issues for certain
values of TARGET_OS.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The package_xxx_install functions date from a different era and are not used by
anything. In the rpm case, they're simply unimplemented, in the tar case they're
using broken whitespace and deprecated functions. We might as well clean
out the old broken unused code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
package index
If for whatever reason the package directory is empty of packages, it
makes sense to error early rather than later in what become much
more obtuse errors. This adds in a sanity check to each of the packaging
backends. It also removes the duplicate createrepo call since the
core index creation function now uses this directly after the switch
to smart.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opkg-build verifies that conffiles exist, so verify that the specified files
actually exist before writing them to conffiles.
This mirrors the behaviour of FILES and package_rpm's CONFFILES handling.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Comment the "set -x" lines since these will add a lot of extra, not
always necessary, debug messages in the log.do_rootfs.
[YOCTO #2599]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* it's not recommended to change this value, because it breaks upgrade path on target
(all old u-a alternatives are forgot in old OPKGLIBDIR value
* but make it consistent, so if someone really want to change that, then
setting OPKGLIBDIR_distro in distro.conf would be enough
* without this there were at least 4 places to change:
rootfs_ipk: opkglibdir variable (notice that I've removed /opkg from it to correspond
with EXTRA_OECONF option used in opkg recipes
package_ipk: ${target_rootfs}${localstatedir}/lib/opkg/ hardcoded in
package_install_internal_ipk
opkg-collateral: value in lists file
opkg: EXTRA_OECONF for all 3 classes, FILES_libopkg, do_install
* validated with buildhistory that without OPKGLIBDIR explicitly set the
output is the same and that after setting
OPKGLIBDIR_forcevariable := "${libdir}"
everything including empty directory from package_ipk is moved to
libdir
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
rerunning task
If we don't do this, stale files can build up, particularly with the PR
server.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current maze of IPKG_ARGS variables is hard to understand and worse,
not even used in some places. This simplifies the code and specifies the
options in one place.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* it was introduced in 2010 by 8c3a7ebac8bed700bcc37f778d5a883cfeee8de8
but doesn't seem needed anymore
* also such do_rootfs failure is good indication that runtime packages
installed are not sane, ignoring this error in do_rootfs just
transfers the issue to end user when he does "opkg upgrade" later
on device
* tested on SHR images with whole feed included and only issue was
gstreamer/gst-plugins-* locale packages (and there is patch for this
on oe-core ML)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb.utils.explode_dep_versions function has issues where dependency information
can be lost. The API doesn't support maintaining the correct information so this
changes to use a new function which correctly handles the data.
This patch also fixes various points in the code to ensure that we do not have any
duplicates in things that use explode_dep_versions.
A new sanity test to test the contents of the R* variables is also added.
[Some changes from Mark Hatle <mark.hatle@windriver.com>]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In deb and ipk, < means <=, while > means >=... there is a different
operator << and >> that means < and >, so we map them when constructing
the packages.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was pointed out we have a number of weird indentations in the python functions.
This patch cleans up 3, 7 and other weird indentations for the core bbclass files.
It also fixes some wierd (odd) shell function indentation which my searches picked up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a recent change, the path to log files may be contained within an
arbitrary directory. To generate the manual log files in the correct path
we should be using the ${BB_LOGFILE}'s path instead of always assuming the
logs go into ${WORKDIR}/temp.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2454]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed an error in multilib prefix extracting.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
* it works only with 'new' packages and with fixed opkg-utils it will unpack
*all* packages, because filelist doesn't support 'cache' like Packages does
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
do_package_write_{deb,ipk,rpm}
* Explicitly set umask to 022. Otherwise the build system's
umask may leak into the image.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now support using dash but these bashisms triggered build failures for me
when using it. This replaces the code with something which works on dash.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a major issue with opkg images at the moment as preinst
functions are not being executed before their dependencies are installed
and this is leading to corruption of images containing avahi/dbus in
particular.
There are various changes in upstream opkg in the last 8 revisions which
make changes in this area but sadly these aren't enough to get things
working for us. I've updated to the latest svn revision with this patch
since it makes sense to pull in those changes first and then supplement
them with the attached patches.
There is a full description of the patches in the patch headers but in
summary they:
a) Ensure preinst functions execute with their dependencies installed.
This is a pretty invasive change as it changes the package install
ordering in general.
b) Ensure opkg sets $D, not $PKG_ROOT which we don't use
c) Change opkg to allow execution of postinstall functions which fail
resulting in execution on the target device as rootfs_ipk.bbclass
currently does manually.
The remaining changes interface this with the rest of the OE build
infrastructure, adding in the option to tell opkg to run the preinst and
postinst functions, ensure the correct environment is present for the
postinst scripts and removing the now unneeded rootfs_ipk class code
which opkg now does itself.
[YOCTO #1711]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Complete the bb.data.getVar/setVar replacements with accesses
directly to the data store object.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of running the following over the metadata:
sed \
-e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should just be a single IMAGE_INSTALL variable. If the package
backends need this split into different multilib components they should
be responsible for doing this, not the user.
This commit removes the MULTILIB_IMAGE_INSTALL variable.
[YOCTO #1564]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the packaging process is run under pseudo, the default user
is now root so there is no longer any need to hardcode this. Also
take this opportunity to move the variable to package_ipk.bbclass
since this is the only user of it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
