| Age | Commit message (Collapse) | Author | Files |
|---|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the recent changes, executing depmod is not needed
anymore.
This simplifies and removes a lot of unnecessary code.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The information retrieved via depmod is incomplete with
regards to kernel modules that are dependencies, in
particular where two kernel modules are built from
different source trees / recipes, which leads to incomplete
dependency information for packages created.
So far, our packages created didn't contain dependencies on
packages created by other recipes, as we solely use depmod
for that, and depmod can only work well after *all* kernel
modules have been copied into one place - it doesn't work
well in a staged approach.
Now that all .ko have correct dependency information at packaging
time, we can use that information to properly track dependencies
across recipies, and can combine the information from the
.modinfo elf section with the information from depmod.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When splitting kernel modules into individual packages, such packages take
their names from the module name. This is OK under most of the circumstances.
However, it may lead to package naming collisions if there exists two
modules with the same name.
Situations like this can occur when building testing modules. For instance,
there exists testing versions of the modules for non-volatile memory that
are built with different linker options but bear the same module name. If
one wants to package such modules, it is be good to be able to name
packages differently. This can be done by prefixing the package name with
a KERNEL_MODULE_PACKAGE_PREFIX that can be set by the recipes that inherit
from module.bbclass.
Cc: Megha Dey <megha.dey@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Example: lirc-dev.ko -> kernel-module-lirc-dev
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using KERNEL_MODULE_AUTOLOAD, autoload was empty, causing
"modprobe None" to get appended to the postinst script.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the rpm package backend enabled, running:
bitbake <image>
bitbake virtual/kernel -c clean
bitbake <image> -c rootfs -f
results in an image with incorrect kernel module dependency information.
The problem is that the System.map and kernel-abiversion files are needed
for depmod and after the recent kernel changes, these are no longer in
sstate.
Its reasonable to require the kernel to unpack/build if you're
about to build a module against it. It is not reasonable to require this
just to build a rootfs.
Therefore stash the needed files specifically for depmod.
Also fix some STAGING_KERNEL_DIR references which were incorrect, found
whilst sorting through his change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
work-shared/MACHINE/kernel-source
work-shared/MACHINE/kernel-build-artifacts
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
where basename != module name
* new KERNEL_MODULE_AUTOLOAD syntax doesn't support modules where basename and
module name don't match (usually - and _), e.g.:
module_autoload_bq27x00_battery = "bq27x00-battery"
* sometimes it's useful to load modules in particular order and
module_autoload allowed to just list multiple modules, e.g.:
module_autoload_snd-soc-neo1973-wm8753 = "snd-soc-s3c24xx snd_soc_s3c24xx_i2s snd-soc-dfbmcs320 snd-soc-wm8753 snd-soc-neo1973-wm8753"
or
module_autoload_g_ether = "s3c2410_udc g_ether"
restore this possibility which is useful for incorrect dependencies
between modules
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Addresses the problem:
The stack trace of python calls that resulted in this exception/failure was:
File: 'split_kernel_module_packages', lineno: 164, function: <module>
0160: if len(os.listdir(dir)) == 0:
0161: os.rmdir(dir)
0162:
0163:
*** 0164:split_kernel_module_packages(d)
0165:
File: 'split_kernel_module_packages', lineno: 150, function: split_kernel_module_packages
0146: 0147: postinst = d.getVar('pkg_postinst_modules', True)
0148: postrm = d.getVar('pkg_postrm_modules', True)
0149:
*** 0150: modules = do_split_packages(d, root='/lib/modules', file_regex=module_regex, output_pattern=module_pattern, description='%s kernel module', postinst=postinst, postrm=postrm, recursive=True, hook=frob_metadata, extra_depends='kernel-%s' % (d.getVar("KERNEL_VERSION", True)))
0151: if modules:
0152: metapkg = d.getVar('KERNEL_MODULES_META_PACKAGE', True)
0153: d.appendVar('RDEPENDS_' + metapkg, ' '+' '.join(modules))
0154:
File: 'package.bbclass', lineno: 148, function: do_split_packages
0144: d.setVar('pkg_postrm_' + pkg, postrm)
0145: else:
0146: d.setVar('FILES_' + pkg, oldfiles + " " + newfile)
0147: if callable(hook):
*** 0148: hook(f, pkg, file_regex, output_pattern, m.group(1))
0149:
0150: d.setVar('PACKAGES', ' '.join(packages))
0151: return split_packages
0152:
File: 'split_kernel_module_packages', lineno: 109, function: frob_metadata
File "split_kernel_module_packages", line 109, in frob_metadata
Exception: AttributeError: 'NoneType' object has no attribute 'split'
ERROR: Function failed: split_kernel_module_packages
[YOCTO #6461]
[a revised version of a patch from Nitin Kamble]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
KERNEL_MODULE_PROBECONF
The current module_autoload_* and module_conf_* variables are error
both ugly and error prone. They aren't registered in the task checksums
so changes to them aren't reflected in the build. This turns out to
be near impossible to fix with the current variable format in any
sensible way :(.
This patch replace module_autoload with the list of variables in
KERNEL_MODULE_AUTOLOAD which is a much simpler and usable API. An
error is printed if an old style variable is encountered. It should
be simple to convert to this.
module_conf_* are harder to deal with since there is data associated
with it, it isn't simply a flag. We need a list of variables that are set
in order to be able to correctly handle the task checksum so we add
KERNEL_MODULE_PROBECONF for this purpose and error if the user hasn't
added a module to it when they should have.
[YOCTO #5786]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During rootfs construction, image.bbclass will call depmod after all the
modules are installed. There's no need to run it from the postinst when
operating in offline root mode.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The has_key() attribute has been removed in python 3 since there is better
syntax available. Use the improved syntax.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* it was generating invalid RDEPENDS when KERNEL_MODULES_META_PACKAGE had
RDEPENDS set already without trailing space
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* this way we can reuse the same functionality also for external modules
including module_autoload_foo and module_conf_foo functionality
* MODULE_PACKAGES variable was removed (splited modules are now returned
by do_split_packages
* KERNEL_MODULES_META_PACKAGE is used to append all splitted packages
to RDEPENDS. In kernel.bbclass it's old "kernel-modules" in
module.bbclass it defaults to ${PN} for upgrade path from
single PN with all modules to PN depending on all new kernel-module-*
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
