summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-11-20libcheck: upgrade to 0.9.11Saul Wold3
Both patches have been merged upstream. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-20sysstat: upgrade to 10.2.0Saul Wold3
Cleanup by moving files to $PN Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-18python: Fix ptest not working problemsZhangle Yang1
The run-ptest contained in python uses a Makefile. The path of the Makefile is changed to ${libdir}/python/ptest in do_install_ptest. However, the directory is wrong when the project is configured with "--enable-multilib=lib32" In addition, do_install_ptest is defined before "inherit ptest", so it is overriden by the one in ptest.bbclass. do_install_ptest is moved down. Signed-off-by: Zhangle Yang <zhangle.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18sysvinit: unmount the psplash lazyilySaul Wold1
There is an race condition where psplash is not quite exited before the unmount occurs causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily unmount and not get this message [YOCTO #5244] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Add option --minutes to show time in minutesPeter Kjellerstedt2
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Add a color for the package_write_* tasksPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Reorder the legend to match the task execution orderPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Make bars without a specified color whitePeter Kjellerstedt1
Previously they were transparent. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Make "Show more" show all processesPeter Kjellerstedt4
While "Show more" is enabled, all processes are shown, regardless of --mintime. This also has the added benefit of making the first shown bar start at its correct offset from the start time, rather than always starting at 0. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Draw a lot less ticksPeter Kjellerstedt1
With this, one second ticks are only enabled if the width of a second is five pixels or more. It is also possible to distinguish 1, 5 and 30 second ticks. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Disable options that do not make sensePeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: No need to do a double list comprehension over filesPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Avoid having overlapping process barsPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Use correct header heightPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Correct the X offset for the chartPeter Kjellerstedt1
This will make the first bar actually start within the graph. It will also move the graph to the right so the names of the first tasks are more likely to be visible. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Set the initial state of "Show more" correctlyPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Make the horizontal scaling stay within boundsPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18pybootchartgui: Import pybootchartgui 0.14.5Peter Kjellerstedt16
This update the pybootchartgui code to the latest release from its new location at "https://github.com/mmeeks/bootchart". This only imports the relevant parts, and not all of bootchart2. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18mtdev: upgrade to 1.1.4Ross Burton3
Refresh fixsepbuild.patch to apply cleanly, and clean up the description. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18libxrandr: upgrade to 1.4.1Ross Burton1
License checksum changes as COPYING was updated upstream with additional copyright notices. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18gdk-pixbuf: upgrade to 2.30.1Ross Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18nfs-utils: Add new option to disable nfsidmap and PACKAGECONFIG for thatMartin Jansa2
* it's autodetecting keyutils from meta-ivi Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18lttng-tools: Fixes incorrect path of ptest casesChong Lu1
In ptest cases, some paths are still the source code path. Continue to fix the paths of executable files in ptest cases to make them work on target. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18packagegroup-core-boot: Drop build-time dependency on virtual/kernelMartin Jansa1
* because kernel isn't needed to build packagegroup and building it doesn't influence if it's included in image or not. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18ofono: upgrade to 1.13Cristian Iorga4
obsolete_automake_macros.patch and missing-ssize_t.patch no longer needed, included in upstream. Better support for BlueZ5. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18buildhistory_analysis: fix error when comparing image contentsPaul Eggleton1
OE-Core commit b7de1eaac9eed559b2d68058f5de67de74a6cb58 added an extra argument to the compare_dict_blobs() function but missed adding the argument to one call to compare two versions of the image-info.txt file. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-16kernel.bbclass: fix hardlink testBruce Ashfield1
The commit [kernel.bbclass: test for hardlinks before installing] doesn't work on all build machines without a space between the ! and the test for hardlink equivalance. The build continues, while the test fails and no copy is made into the sysroot. Eventually tasks like build_hdimg will fail with the missing kernel with the root cause being less than obvious. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-15kernel.bbclass: test for hardlinks before installingBruce Ashfield1
commit df564c4 [kernel: Use hardlinks for do_populate_sysroot for speed] does indeed speed up the build, but it also means that the KERNEL_OUPUT and KERNEL_IMAGETYPE may be hardlinks. If they are hardlinks, install complains that they are actually the same file and stops the build. We can easily test and avoid the copy if the file is already in place. [YOCTO #5527] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14linux-yocto/3.10: meta: ARM: OMAP3: Add USB PHY driver for BeagleboardBruce Ashfield2
Updating the meta branch SRCREV to update the USB configuration: The Beagleboard needs the USB PHY drivers in the kernel in order to enable USB and Ethernet functionality. This fix ensures that they are built in by tweaking the kernel config. Tested on Beagleboard xM Rev. C2. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14linux-yocto-rt/3.10: fix ntp merge issueBruce Ashfield1
Updating the -rt SRCREVs to pick up the following fix: ntp: fix ntp_notify_cmos_timer merge issue PREEMPT_RT_FULL has a stubbed ntp_notify_cmos_timer due to a bad merge. Renaming and restoring the full -rt functionality to this routine. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14linux-yocto/3.10: meta: ARM: OMAP3: Add USB PHY driver for BeagleboardBruce Ashfield3
Updating the meta branch SRCREV to update the USB configuration: The Beagleboard needs the USB PHY drivers in the kernel in order to enable USB and Ethernet functionality. This fix ensures that they are built in by tweaking the kernel config. Tested on Beagleboard xM Rev. C2. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/license: use "1" to set boolean variablesPaul Eggleton1
The expected usage of COPY_LIC_MANIFEST and COPY_LIC_DIRS appears to be to set them to "1" to enable; however the test here is just testing whether they have a value at all, so setting them to "0" would also enable them which is somewhat disingenuous. Actually check if they are set to "1" instead in order to fix this. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/pkg_metainfo: removePaul Eggleton1
This is very old, and we now have pkgdata which is much more complete. Nobody appears to be using this class, and even OE-Classic had no current references to it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/pkg_distribute: removePaul Eggleton1
This appears to be a very old way of archiving recipes and associated files. We have better ways of doing this now, and nobody appears to be using this class - even OE-Classic had no current references to it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14systemd: fix commentsPaul Eggleton2
It's DISTRO_FEATURES; DISTRO_FEATURE is invalid. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/license: fix commentsPaul Eggleton1
It's LICENSE_FLAGS, LICENSE_FLAG is invalid. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14gtk-immodules-cache: fix error message to use correct namesPaul Eggleton1
It's gtk-immodules-cache and GTKIMMODULES_PACKAGES. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14bitbake.conf: remove CPU_FEATURES defaultsPaul Eggleton1
This variable has been unused since the tune file overhaul two years ago. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/sanity: validate SDKMACHINE valuePaul Eggleton1
If SDKMACHINE is set then check that a configuration file matching it actually exists, otherwise the user won't know that they've set it incorrectly. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14bitbake.conf: remove BOOTSTRAP_EXTRA_* variable defaultsPaul Eggleton1
These were for task-bootstrap in OE-Classic and have never been used in OE-Core. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/insane: improve LIC_FILES_CHKSUM messagesPaul Eggleton1
* If the md5 parameter is specified with no value, report that the checksum is not specified instead of reporting that it has changed * If the md5 checksum has changed, point directly to the license file in a way that is easy to copy and paste and give the line numbers in an easy to read form, as well as asking the user to verify that the new contents matches the current LICENSE value. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14scripts/create-recipe: fix handling of --helpPaul Eggleton1
If --help is specified as the first argument, show the standard help text instead of trying to process it as a URL. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14perl: perl-ptest.inc polutes package dependencies when ptest not enabledJeffrey C Honig1
When ptest is not enabled, the populate_packages_prepend function runs wheter ptest is enabled or not. This causes ptest packages to get in the dependencies list when ptest is not enabled. Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14classes/image-empty: removePaul Eggleton2
We don't actually need this dummy class; "inherit" can be used with an expression that evaluates to nothing with current BitBake. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14staging: Use hardlinking for sysroot_stage_dirRichard Purdie1
This saves about 2GB on a core-image-sato build so is worth doing and is consistent with our efforts to try and decrease our build footprint. Build time in my local test seemed unaffected but on more IO bound machines it should help. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12binutils: Add gnu-config-native to DEPENDSPhil Blundell1
do_configure() in binutils.inc includes an explicit call to gnu-configize so we need to make sure that gnu-config-native is present. Previously this was being dragged in with the rest of the autotools stuff, but commit 54a3e2ee37003fc56af0339f857b0b6442790c26 disabled that for binutils-cross on the grounds that "we don't autoreconf" the toolchain components. Fix this by adding gnu-config-native itself explicitly to DEPENDS. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12insane, license: Trap MalformedUrl exceptions when parsing LIC_FILES_CHKSUMPhil Blundell2
bb.fetch.decodeurl() will throw if it doesn't like the look of the URL that it's given. (Bitbake's idea of what constitutes a valid URL is somewhat idiosyncratic so it is fairly easy to trip over this by mistake when writing a recipe.) If these exceptions are allowed to propagate all the way up to better_exec() then we will get a large amount of python stack trace spew when they are finally caught. Avoid that by catching them locally and throwing bb.build.FuncFailed() with a suitable explanation instead. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12autogen-native: remove the unnecessary RDEPENDSJackie Huang1
The recipe only provides native packge, the RDEPENDS is not necessary. Remove it and also two unnecessary comment lines. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12Revert "glib-2.0: Specify libiconv when building on uclibc"Khem Raj1
This reverts commit 38b6c4df7c215ed7fd6be107fbc2527e66791e2e. Its not needed anymore after upgrade to 2.38 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12bitbake.conf: Default DISTRO to nodistroRichard Purdie3
An empty distro value leads to OVERRIDES and FILESOVERRIDES containing "::" entries which causes odd issues such as files being included when they shouldn't be. We could put in anonymous python to guard against empty entries but its messy and setting a default value for DISTRO to something harmless is much easier. This patch adds a weak default and ensures the sanity test doesn't complain about it. DISTRO_VERSION and SDK_VERSION are also updated to match. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-06 22:46:31 +0000