summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2018-01-11at: explicitly depend on bison-native for deterministic buildsDenys Dmytriyenko1
Usually bison-native gets into sysroot through indirect dependencies, even with RSS. But when bison-native is not in sysroot, due to different system config, it falls back to using "yacc" instead and fails like this: | yacc -d parsetime.y | make: yacc: Command not found | Makefile:82: recipe for target 'y.tab.c' failed | make: *** [y.tab.c] Error 127 Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-11perf: depend on native versions of bison and flexDenys Dmytriyenko1
Explicitly depend on bison-native and flex-native for deterministic builds, as those are required for the build: | Makefile.config:129: *** Error: flex is missing on this system, please install it. Stop. | Makefile.perf:205: recipe for target 'sub-make' failed | make[1]: *** [sub-make] Error 2 | Makefile:68: recipe for target 'all' failed | make: *** [all] Error 2 | Makefile.config:133: *** Error: bison is missing on this system, please install it. Stop. | Makefile.perf:205: recipe for target 'sub-make' failed | make[1]: *** [sub-make] Error 2 | Makefile:68: recipe for target 'all' failed | make: *** [all] Error 2 In most cases, those dependencies come indirectly via toolchain dependencies, specifically binutils-cross, which pulls both bison-native and flex-native. Different setups, such as with external toolchain, would expose this problem, since correct dependency is not marked explicitly. The change is build-tested on all qemu architectures. Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-11grub-efi: Fix DEPENDSRichard Purdie1
We need to append to DEPENDS else the dependencies on bison/flex-native are lost, potentially resulting in build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-11gcc: Add missing flex-native dependencyRichard Purdie2
This is needed for all stages of the cross/target/canadian compilers and without it (and with indirect gcc dependencies disabled), the steps fail. Add missing dependencies. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10linux-firmware: Bump revision to 65b1c68cOtavio Salvador1
The bump includes following changes: 65b1c68 wl18xx: update firmware file 8.9.0.0.76 8650396 wl127x/wl128x: update firmwares 2eefafb rtlwifi: rtl8723de: Add firmware for new driver/device 4a77cab linux-firmware: DMC firmware for cannonlake v1.07 2567e09 nvidia: add GP108 signed firmware 2451bb2 linux-firmware: liquidio: add v1.7.0 vswitch firmware 7f93c9d brcm: add CYW4373 firmwares and Cypress license file fdee922 linux-firmware: Update firmware patch for Intel Bluetooth 8260 9a843a1 linux-firmware: Update firmware file for Intel Bluetooth 8265 97339b3 linux-firmware: Add firmware file for Intel Bluetooth 9260 db9964e linux-firmware: Add firmware file for Intel Bluetooth 9560 e4252cf Revert commits a42f895, c113d33, 041aff8, 73d13b5 a42f895 linux-firmware: Update firmware patch for Intel Bluetooth 8260 c113d33 linux-firmware: Update firmware file for Intel Bluetooth 8265 041aff8 linux-firmware: Add firmware file for Intel Bluetooth 9260 73d13b5 linux-firmware: Add firmware file for Intel Bluetooth 9560 30946b9 amdgpu: add firmware for Raven 71a4800 amdgpu: update vega10 vce firmware 89c6211 linux-firmware: intel: Add Cannonlake audio firmware b39260f nfp: add firmware for tc-flower c752e24 nfp: change firmware directory layout 00a92a3 nfp: update firmware for Agilio CX SmartNICs 02d857e linux-firmware: DMC firmware for skylake v1.27 17e6288 brcm: update firmware for bcm4358 1841cec brcm: update firmware for bcm4356 b3f4e74 brcm: update firmware for bcm4354 cd86989 brcm: introduce firmware for bcm43430 revision 0 5ee46c2 brcm: update firmware for bcm4339 8e864c2 Mellanox: Add new mlxsw_spectrum firmware 13.1530.152 fd45000 WHENCE: Add missing entry for mlxsw_spectrum firmware 7f9bbc7 WHENCE: Fix typo in entry for iwlwifi-8265-34.ucode 284de20 s2255drv: f2255usb: firmware version 1.2.8 7c705a4 amdgpu: add new CP firmware for polaris chips 5582ca4 qed: Add firmware 8.33.1.0 e721933 qcom: add venus firmware files for v4.2 f36a8e2 qcom: add firmware files for Adreno a530 85313b4 iwlwifi: add firmware version 34 for new 9000 series 6c161c5 linux-firmware: liquidio: update firmware to v1.7.0 b964279 linux-firmware: intel: Update Geminilake audio firmware c4276b6 iwlwifi: add firmware version 33 for new 9000 series 5a05332 iwlwifi: add new firmware version 34 for 8000C and 8265 1a5fd94 iwlwifi: update firmwares for 3160, 3168, 7260, 7265 and 7265D 796c912 iwlwifi: update firmwares for 3160, 3168, 7265D, 8000C and 8265 1156e62 linux-firmware: DMC firmware for kabylake v1.04 db3e185 linux-firmware: update Marvell PCIe-USB8997 firmware image de81715 linux-firmware: GuC firmware for kabylake v9.39 434e712 linux-firmware: GuC firmware for Broxton v9.29 0aebd9f linux-firmware: GuC firmware for Skylake v9.33 de5b4c2 linux-firmware/i915: Add Cannonlake DMC version 1.06 8e7c787 linux-firmware/i915: Add Geminilake DMC version 1.04 e0494e9 linux-firmware: update Marvell PCIe-USB8997 firmware image 11db131 linux-firmware: update Marvell PCIe-USB8897-A2 firmware image Included in those changes, two license checksums has been changed: - LICENCE.Netronome: minimal change dropping a word in license name; - WHENCE: adjustments due the new firmware versions; Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10gettext: rationalise optional dependenciesRoss Burton1
gettext has optional dependencies on libxml2, glib, libcroco and libunistring. If they're not available then gettext will use internal copies, but it can also use system libraries. For gettext-native and nativesdk-gettext continue to use the internal copies to reduce the dependencies, but for target use the system shared libraries. Also gettext 0.19.7 onwards swapped expat for libxm2, so remove the build dependency on expat. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10glib-2.0: rationalise build dependenciesRoss Burton1
nativesdk-glib-2.0 doesn't build-depend on nativesdk-gettext, but all variations need to depend on gettext-native as they need msgfmt (so gettext-minimal-native isn't an option). Also add virtual/libintl as glib explicitly needs this. Generally this is provided by glibc but some platforms (such as MinGW) don't. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10gnupg: use native version for signing, rather than one provided by hostAlexander Kanavin4
Using host gpg has been problematic, and particularly this removes the need to serialize package creation, as long as --auto-expand-secmem is passed to gpg-agent, and gnupg >= 2.2.4 is in use (https://dev.gnupg.org/T3530). Sadly, gpg-agent itself is single-threaded, so in the longer run we might want to seek alternatives: https://lwn.net/Articles/742542/ (a smaller issue is that rpm itself runs the gpg fronted in a serial fashion, which slows down the build in cases of recipes with very large amount of packages, e.g. glibc-locale) Note that sstate signing and verification continues to use host gpg, as depending on native gpg would create circular dependencies. [YOCTO #12022] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10gnupg: enable native versionAlexander Kanavin4
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10gnupg: upgrade to 2.2.4Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10libgcrypt: upgrade to 1.8.2Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10image: Expand PV to avoid AUTOREV parsing failuresRichard Purdie1
Currently, setting PV to include SRCPV for build-appliance results in: bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Fetch command export ftp_proxy="http://proxy.yocto.io:5187/"; export FTP_PROXY="http://proxy.yocto.io:5187/"; export PATH="${TMPDIR}/work/ qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot-native/usr/bin/python3-native:${TMPDIR}/work/ qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot-native/usr/bin/python3-native:${TMPDIR}/work/ qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot-native/usr/bin/python3-native:/home/pokybuild/ yocto-autobuilder/yocto-worker/buildtools/build/scripts:${TMPDIR}/ work/qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot-native/usr/bin/x86_64-poky-linux:${TMPDIR}/work/ qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot/usr/bin/crossscripts:${TMPDIR}/work/qemux86_64-poky-linux/ build-appliance-image/fetcheravoidrecurse-r0/recipe-sysroot-native/usr/sbin: ${TMPDIR}/work/qemux86_64-poky-linux/build-appliance-image/ fetcheravoidrecurse-r0/recipe-sysroot-native/usr/bin:${TMPDIR}/work/ qemux86_64-poky-linux/build-appliance-image/fetcheravoidrecurse-r0/ recipe-sysroot-native/sbin:${TMPDIR}/work/qemux86_64-poky-linux/ build-appliance-image/fetcheravoidrecurse-r0/recipe-sysroot-native/bin:/home/ pokybuild/yocto-autobuilder/yocto-worker/buildtools/build/bitbake/bin:${TMPDIR} /hosttools"; export HOME="/home/pokybuild"; git -c core.fsyncobjectfiles=0 ls-remote git://git.yoctoproject.org/poky failed with exit code 127, output: /bin/sh: 1: git: not found This is because PV is being expanded when TMPDIR is unset. Expand PV in advance to avoid this problem. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10manifest.py: sort package listMichael Blättler1
The entries of the created manifest file are always in a different order. To ensure a deterministic build output the entries are ordered alphabetically. Signed-off-by: Michael Blättler <michael.blaettler@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10multilib.bbclass: remove invalid PACKAGE_INSTALLRobert Yang1
The PACKAGE_INSTALL is only used by image recipe, the previous code had handled it in "if bb.data.inherits_class('image', d)", handle it again doesn't make any sense (there is no PACKAGE_INSTALL for non-image recipe), so remove it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10sstate.bbclass: sstate_hardcode_path(): fix for multilibRobert Yang1
It only substituted staging_target for target recipe which didn't work for multilib, for example, postinst-useradd-lib32-polkit: * No multilib: PATH=/path/to/tmp-glibc/work/core2-64-wrs-linux/polkit/0.113-r0/recipe-sysroot-native/bin staging_target=/path/to/tmp-glibc/work/core2-64-wrs-linux/polkit/0.113-r0/recipe-sysroot The PATH would be substituted to: FIXMESTAGINGDIRTARGET-native/bin Not the funny "-native/bin", this works well. * When multilib: PATH=/path/to/tmp-glibc/work/core2-32-wrsmllib32-linux/lib32-polkit/0.113-r0/recipe-sysroot-native/bin staging_target=/path/to/tmp-glibc/work/core2-32-wrsmllib32-linux/lib32-polkit/0.113-r0/lib32-recipe-sysroot Now staging_target endswith "/lib32-recipe-sysroot", so it can't replace '/recipe-sysroot-native' in PATH , so PATH can't be fixed, and there would be build errors when building multilib + rm_work, for example: chown: invalid user: ‘polkitd:root’ Substitute staging_host for target recipe can fix the problem, now all of native, cross and target need substitute staging_host, so we can simply the code a little. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10nativesdk/sdk: Update sdk dummy providersRichard Purdie9
When we migrated rpm v5 -> v4, we lost the ability to drop "per file" dependencies from the rpm backend for things like "/bin/bash" and "/usr/bin/env" which meant the sdks were becomming 'bloated'. This restores the functionality using a dummy package, similarly to the way the buildtools perl issue was addressed. It also removes the non-functional old code so as not to confuse people in future. I ran into this problem trying to filter dependencies to only rpms a build directly depends upon and it turns out we have some determinism issues in this area so this is something key to fix. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-10package_deb: Handle / in dependency nameRichard Purdie1
We can end up with / in dependency names from file dependencies but the deb format doesn't allow this. Filter the names to allow such dependencies to work. Names have to start with an alphanumeric digit so also handle this. This allows for future handling of "per file" dependencies similarly to the rpm backend, bring parity to the functionality of the backends. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-09libcroco: enable nativesdk buildsRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09avahi: remove explicit avahi-dev RDEPENDSRoss Burton1
These were added to the avahi-dev package back in 2011 before avahi-ui existed at all. The problem of GTK+ being pulled in via avahi-dev was finally solved with the avahi-ui split, so these explicit (and by being manually maintained, incomplete) dependencies can be removed. This also results in gettext-dev being removed from the dependency tree (the gettext library API is provided by glibc/musl), which means that for a standard image we don't need to build target gettext at all anymore. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09m4: merge two .inc filesRoss Burton2
Now that oe-core only has one copy of m4, there's no need to maintain two inc files. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09native/cross: remove redundant DEPENDS_GETTEXT assignmentRoss Burton2
DEPENDS_GETTEXT defaults to gettext-native, so there's no need to set it again in these classes. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09pango: don't wipe EXTRA_AUTORECONFRoss Burton1
This was added in 2007 to solve unspecified build errors, but the autotools support has improved a lot since then and nothing breaks with it removed. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09bison: remove pointless gettext-minimal-native DEPENDSRoss Burton1
In native builds USE_NLS is set to 'no' so the gettext class will handle adding gettext-minimal-native to DEPENDS. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09bison: remove obsolete patchRoss Burton2
m4.patch was added before 2005 (history isn't in git, only BitKeeper) and doesn't appear to be needed anymore. Also add a comment to clarify why acpaths is required. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-09psmisc: improve autopoint-enablingRoss Burton1
Instead of globally clearing EXTRA_AUTORECONF (which by default currently contains --exclude=autopoint) use _remove to selectively remove the piece we care about. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-08icu-dbg: improve reproducibilityJuro Bystricky1
Make sure build host references do not end up being compiled in the image. This only affects libicutu and icu-dbg. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07perl-ptest: various fixesJuro Bystricky3
Improve reproducibility: Remove all build host references from distributed files. Do not package non-linux OS related files. Also remove some additional files not needed by run-ptest. (There are probably still more files that can be removed, but as long as they don't leak build host references they are harmless). Fix the expected checksum of MakeMaker/lib/ExtUtils/Liblist/Kid.pm to match the one expected: We modified the file, but did not recalculate/update the file checksum accordingly. (This fixes the only failing test.) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07perl-dbg: improve reproducibilityJuro Bystricky1
Remove various build host references scattered within comments in numerous files that are distributed in the package. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07libunwind: Disable documentation explicitlyRichard Purdie1
We don't have latex2man in HOSTTOOLs so documentaion is never built but this dependency does cause problems on older releases like morty, pre-HOSTTOOLS. Document the configuration explicitly in master. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07gstreamer: use a patch instead of sed to fix gtk-doc makefilesRoss Burton4
seds can get stale without warning and repeated application can cause problems, so move the gtk-doc seds into a patch. (From OE-Core rev: a704411ab0f1e5f8cbf57ff54b36d60ccaf0d223) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07libproxy: Rely on cmake.bbclass to put cmake package files in dev packageMike Crowe1
cmake.bbclass now ensures that ${datadir}/cmake ends up in the dev package, so this recipe doesn't need to do so itself. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07libical: Rely on cmake.bbclass to put cmake package files in dev packageMike Crowe1
cmake.bbclass now ensures that ${libdir}/cmake ends up in the dev package, so this recipe doesn't need to do so itself. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07waffle: Rely on cmake.bbclass to put cmake package files in dev packageMike Crowe1
cmake.bbclass now ensures that ${libdir}/cmake and ${datadir}/cmake end up in the dev package, so this recipe doesn't need to do so itself. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07vulkan: Rely on cmake.bbclass to put cmake package files in dev packageMike Crowe1
cmake.bbclass now ensures that ${libdir}/cmake ends up in the dev package, so this recipe doesn't need to do so itself. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07libsolv: Rely on cmake.bbclass to put cmake package files in dev packageMike Crowe1
cmake.bbclass now ensures that ${datadir}/cmake ends up in the dev package, so this recipe doesn't need to do so itself. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-07cmake: Always put cmake package files in -dev packagesMike Crowe1
Various recipes that inherit cmake contain FILES_${PN}-dev magic to add the generated package files to their -dev packages. Since this is a standard feature of cmake, we might as well teach cmake.bbclass to do this itself so those recipes can be simpler. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06package_manager.py: remove obsolete MULTILIB_ARCHSRobert Yang1
It had been removed since 2011: commit b774bf44ef004276da12a83ebd69715c00b596ac Author: Lianhao Lu <lianhao.lu@intel.com> Date: Tue Aug 16 16:26:49 2011 +0800 package(_ipk).bbclass: opkg using ALL_MULTILIB_PACKAGE_ARCHS Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06package_manager.py: print running dnf commandRobert Yang1
This can make debug easier, for example, makes it easy to run the command mannually. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06multilib.bbclass: remove unneeded bb.data.inherits_class()Robert Yang1
It is duplicated to previous. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06multilib.bbclass: remove obsolete DEFAULTTUNE_ML_Robert Yang1
It had been dropped by: commit 65581c68d130fa74d703f6c3c92560e053857ac7 Author: Alexander Kanavin <alexander.kanavin@linux.intel.com> Date: Mon Feb 13 16:44:48 2017 +0200 rootfs_rpm.bbclass: migrate image creation to dnf Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06volatile-binds: use PN to replace hardcode nameRobert Yang1
Otherwise it doesn't work since SYSTEMD_SERVICE_volatile-binds is not defined when multilib. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06multilib_global.bbclass: fix indentRobert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06oe/copy_buildsystem.py: make sure layer existsRobert Yang1
It had a problem when nested layer before, e.g.: layer_a/layer_b/ And when layer_b is handled before layer_a, then layer_a dir existed, so it would be treated as already handled, which was wrong, check conf/layer.conf can fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06populate_sdk_ext.bbclass: don't rename layers when failedRobert Yang1
The previous code: os.rename(sdkbasepath, temp_sdkbasepath) try: foo finally: os.rename(temp_sdkbasepath, sdkbasepath) always renamed the path, it made the debug harder when error happened. drop the "try: finally" makes the debug easier. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06testsdk.bbclass: add a newline after own-mirrorsRobert Yang1
Otherwise it would generate lines like the following when multilib: INHERIT += "own-mirrors"SSTATE_MIRRORS += " \n file://.* file:///path/to/../share/sstate-cache/PATH" Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06staging.bbclass: make subprocess.check_output() capture stderrRobert Yang2
This is very useful for debugging. The similar to testsdk.bbclass. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06pulseaudio: change pulse to be a system groupJackie Huang1
pulse is added as a system user, so the group 'pulse' is meant to be a system group as well, which is the same with other distros like ubuntu/centos. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06maintainers.inc: add missing entries for gst-validate, gst-examples and mesonAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06libpcre2: add packages for 16-bit and 32-bit code unit supportStefan Müller-Klieser1
The packages loosely follow the debian package names. In that way more projects, e.g. Qt5 for 16-bit, are able use system libraries. This does not change the existing default package. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-06bitbake.conf: Set AUTOREV to have a vardepvalueRichard Purdie2
If you have a recipe which does not include SRCPV in PV but does set SRCREV = "${AUTOREV}" and you run do_fetch, then change the repo to a new commit then run do_unpack, do_unpack will fail since the new commit doesn't exist in the repo that was fetched. The problem is the revision chosen is not represented in the do_fetch task hash. It if were, the fetch would rerun first and the commit would be present. It works when PV includes SRCPV since that does contain the chosen commit from the AUTOREV. The solution is to include the SRCPV value into the representation of AUTOREV used for checksum calculation purposes. Add a selftest for this issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-23 15:18:05 +0000