| Age | Commit message (Collapse) | Author | Files |
|---|
|
The init-functions had been installed to /lib/lsb/init-functions
according to lsb spec, then there is an installed-vs-shipped issue when
build with multilib:
ERROR: QA Issue: lsb: Files/directories were installed but not shipped
/lib
/lib/lsb
/lib/lsb/init-functions [installed-vs-shipped]
Fix the issue and indent.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make the v4l PACKAGECONFIG option control building of the video4linux2
plug-in (not use of libv4l, as it did before) and enable by default.
Add a separate libv4l PACKAGECONFIG to control use of libv4l (disabled
by default since libv4l is not part of oe-core).
The default config for gst-plugins-good and gstreamer1.0-plugins-good
is now aligned with regards to v4l, ie:
v4l support: enabled by default
v4l use of libgudev: enabled by default
v4l use of libv4l2: disabled by default
This commit fixes the following build-deps QA Warnings:
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libudev, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libgudev, but it isn't a build dependency? [build-deps]
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This sed script hasn't worked since PulseAudio 0.9.8 (released in
2007), because the match condition refers to "sinc-fastest", while the
default resampler is nowadays speex-float-1.
The idea behind the sed script might be good, but it seems obvious
that nobody is actually depending on the script, so let's just delete
it.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add patch for make castings to time_t values that are long long int
in x32 ABI.
[YOCTO #7447]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Add a patch for fix printing of time_t value that is long long int
in x32 ABI instead of long int.
[YOCTO #7423]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Add a patch for fix build in x32 ABI, the fail is cause by time_t
printf because time_t is long int in x64 and long long int in x32.
[YOCTO #7422]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Otherwise systemd uses AC_PROG_PATH and finds it in the sysroot or host
system, which won't work on the target.
[YOCTO #7408]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since udev version 176 (udev commit 06316d9) udev switched modprobe
explicit rules by the builtin kmod support.
The rule using the builtin kmod support is in
'/lib/udev/rules.d/80-drivers.rules':
DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
perf has a dependency on bash in its utilities, which generate the
following warning:
WARNING: QA Issue: perf requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
Since perf is not installed on extremely small systems, we just add
bash to the RDEPENDS, rather than modifying scripts or removing content.
[YOCTO: #7445]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Updating to the latest and greatest -stable release for the 3.19 series.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The linux-yocto kernel has a meta-data component which accompanies the
actual tree. That meta-data is processed to generate a series file that
controls the patching and configuration of the kernel.
patching and configuration are two distinct phases, so when working on
kernel configuration, it doesn't make sense to always have to re-run
the patching step just to update configuration data in the meta-series.
To allow a more granular set of tasks, we break the meta-data generation
into a separate task, which runs before do_patch. This allows the task
to be explicitly called when working on configuration, but otherwise
has no impact on the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
When fixing a kernel configuration warning, it is often necessary to
modify the kernel's meta-data and re-run the tools to update and
re-audit the config. This implies that the patch, config and audit
steps are run multiple times.
The tools had a bug that would incorrectly restore old meta-data
versus using updated configuration. Updating the kern-tools SRCREV
to fix the issue.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
On WIN32 the file argument to gst_debug_log_valist is shortened to just
the filename. This is useful not only for MSVC, but also with gcc/Linux
when doing cross-compilation builds and out-of-tree builds.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For now, we would meet the following QA error if we build dbus-test in
the same build directory with multilib enabled/disabled.
The steps are as follows:
1. Enable multilib and `bitbake dbus-ptest'
2. Disable multilib and `bitbake dbus-ptest'
The error message is as follows:
ERROR: QA Issue: dbus-test: Files/directories were installed but not shipped
/usr/lib64
/usr/lib64/dbus-test
/usr/lib64/dbus-test/ptest
/usr/lib64/dbus-test/ptest/run-ptest
...
The problem is that the ${D} is not cleaned up at the second build while it
should be.
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sometimes we need to override the gdb from third party
tool SDKs, this helps out, moreover it also makes it consistent
with in OE-Core too to have multiple versions of gdb if we ever
needed to
Change-Id: Ibe1ae59175984bbc661c243764c81cd99fef54d1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes a scenario where the system has libpulse installed but not
pulseaudio-server. The "breakage" didn't have any big practical
effects, though, because the default client.conf contains only
comments anyway.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch creates a variable for the install_dir name so it can be
something other than /install, also by doing this we can correctly
clean up the empty directories (/install/tmp) during the clean-up
phase. The new default is /oe_install so as to not conflict with other
possible packages that might use /install to place files.
[YOCTO #7353]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test_nonmatching_checksum doesn't need the default dependencies,
and they would just take extra time to generate.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
test_foo is renamed to test_nonmatching_checksum. It was a mistake to
submit it with the old name.
There was also some extra whitespace removed.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
libmatchbox links to libjpeg if it is present so just explicitly build
it and then check it appears in DEPENDS.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a license file matched more than one of the specifications (e.g.
COPYING.GPL) then it was being added to LIC_FILES_CHKSUM more than once.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the change to externalsrc we can now handle these, so add a test
to ensure they can be built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Whilst this test would seemingly be better placed as a runtime test,
unfortunately the runtime tests run under bitbake and you can't run
devtool within bitbake (since devtool needs to run bitbake itself).
Additionally we are testing build-time functionality as well, so
really this has to be done as an oe-selftest test.
This test does have a few perhaps unusual requirements in order to run:
* pexpect is installed
* MACHINE is set to one of the qemu machines
* runqemu tap devices have been set up
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Allow get_bb_var() to work with unexported variable values such as
MACHINE - the workaround is a little crude but should suffice for now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* We don't want to ignore changes in the meta-selftest directory
* While I'm at it, meta-hob has been gone for a while now, so drop the
reference to it here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a dry-run option to the deploy-target and undeploy-target
subcommands so you can see the list of files to be deployed or
un-deployed before actually carrying out the operation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If SRC_URI contains local files (file:// references) these will almost
certainly be required at some point during the build process, so we need
to actually fetch these to ${WORKDIR} as we would normally.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The -q option to scp does stop the progress being shown, which is mostly
superfluous, however it also stops errors from ssh being shown - if
there's a problem, you'll just get "lost connection" which really isn't
that helpful. As a compromise, add a -s/--show-status option and
advertise this when the command fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you haven't built the recipe yet or if the output directory (${D}) is
empty, then we should tell the user rather than have scp error out.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you're testing with multiple images/devices that have the same IP
address / hostname then it can be annoying to deal with host key
mismatches all of the time. As a MITM attack is unlikely in the local
test environment, provide a command line option to pass the appropriate
options to scp/ssh to disable the host key checking.
Note: if you wish to apply this permanently, the best way is to do it
through your ssh configuration e.g. by adding the following to your
~/.ssh/config:
Host 192.168.7.2
UserKnownHostsFile=/dev/null
StrictHostKeyChecking no
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Consolidate code for checking compatible recipes and consider meta and
packagegroup recipes as well as package-index and gcc-source to be
incompatible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
source tree
If you point devtool modify to a source tree previously created by
devtool modify or devtool extract, then we need to try to pick up the
correct initial revision so that devtool update-recipe knows where to
start looking for commits that match up with patches in the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a -a/--all option to allow you to quickly reset all recipes in your
workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
No functional changes, just use a unique name for each parser.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Pass correct arguments to undeploy() function
* If an error occurs during undeploy(), exit instead of continuing
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Inserting the "From rev" comment depended on having at least one
Signed-off-by line in the patch header. Some old repository commits in
openembedded-core and bitbake do not have those.
When inporting those, just insert at the end of the patch
header. While doing so, ensure that there's exactly one blank line
since the last non-blank line.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Patching the subject line must be limited to the subject of
the main patch itself. In particular, git formatted patches embedded in the patch must not be changed.
Achieved by limiting the replacement to the lines until the first
subject in the patch, just as it is done for modifying the first
Signed-off-by.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The existing patch might already have the desired prefix, perhaps
even multiple times (due to some previous import error). Ensure
that after the replace, the prefix is present exactly once.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new "since_revision" property can be used to cut off the imported
history at some point. This is useful to keep the resulting repository
smaller while still preserving enough history that "git annotate"
reports the right author and commit for most lines.
The initial, squashed import commit shows up with "unknown" as author
in the "git annotate" output. It has the repository name as prefix
in the subject line; importing that commit works best with a
layer hook which does not add the repository name again when
it is already present. Adding it here is useful for hooks
which do not extend the subject line.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of local graft entries rooting the imported branches in the
shared root commit, use replacement objects.
The advantage is that they get moved around by "git push" and "git
fetch", so everyone has the same, nicer view with everything starting
at the beginning of the combined repository.
If undesired, these objects can be removed with "git replace".
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new --history parameter enables a new mode in "combo-layer init"
where it copies the entire history of the components into the new
combined repository. This also imports merge commits.
Moving into a destination directory and applying commit hooks
is done via "git filter-branch" of the upstream branch. File
filtering uses the same code as before and just applies it
to that filtered branch to create the final commit which
then gets merged into the master branch of the new repository.
When multiple components are involved, they all get merged
into a single commit with an octopus merge. This depends
on a common ancestor, which is grafted onto the filtered
branches via .git/info/grafts.
These grafts are currently left in place. However, they do not get
pushed, so the local view on the entire history (all branches rooted
in the initial, empty commit, temporarily diverging and then
converging) is not the same as what others will see (branches starting
independently and converging). Perhaps "git replace" should be used
instead.
The final commit needs to be done manually, as before. A commit
message with some tracking information is ready for use as-is. This
information should be sufficient to implement also "combo-layer
update" using this approach, if desired. The advantage would be that
merge commits with conflict resolution would not longer break
the update.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The Configuration class mirrors all properties in local hashes.
When updating the configuration, also update these properties
to remain consistent.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
