summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-10-30cups: upgrade to 1.7.0Saul Wold3
Rename and consolidate cups16.inc to cups.inc use PACKAGECONFIG for pam. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30udev: Update touchscreen rule for ID_INPUT_TOUCHSCREENTom Rini1
Since udev 174 udev has been running input_id as a built-in command and setting this value in the environment for touchscreens. Use this logic to detect when to make a touchscreen0 symlink. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30connman: upgrade to 1.19Cristian Iorga1
Improvements: - On startup keep interfaces already configured with static IPv4 addresses if there is a service configuration file containing the very same static values. If not, take the interface down and flush the old configuration as before (Jukka Rissanen). - Handle FallbackNameservers properly; use them when no other nameservers have been configured for a service (Patrik Flykt). Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30libcap: fix CAP_LAST_CAPRoy Li2
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30glib-2.0: upgrade to 2.38.1Cristian Iorga1
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30bluez5: upgrade to 5.10Cristian Iorga3
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30pixbufcache.bbclass: gdk-pixbuf-query-loaders depends on libzKonrad Scherer1
ldd sysroots/x86_64-linux/usr/bin/gdk-pixbuf-query-loaders.real <snip> libz.so.1 => /sysroots/x86_64-linux/usr/bin/../../usr/lib/libz.so.1 (0x00007fab55393000) If zlib-native has not been unpacked, host libz is used which can fail. Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30sudo: upgrade to 1.8.8Cristiana Voicu2
License checksum updated to reflect additional Copyright for file getopt_long.c, owned by The NetBSD Foundation, Inc Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30curl: upgrade to 7.33.0Cristiana Voicu1
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30at: upgrade to 3.1.14Cristiana Voicu3
Removed 2 patches because they were merged upstream Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30opkg: putting the service files into PNRoy Li1
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30qt4: add upstream QTBUG-34218/QTBUG-34234 misaligned selection patchJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30wic: Remove selinux_check()Tom Zanussi1
This seems to be an obsolete check - we don't have any problems with image creation under selinux, so remove it. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30strace: remove += assignment of a OVERRIDES variableMing Liu1
In some cases, it's unfit to use "+=" in a conditional appending, we would end up with the variable being set rather than being appended, which is not it mean to. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30pigz: Add pigz to buildtools tarballKonrad Scherer2
When using the tar executable in the buildtools, tar will execute gzip. If this happens before zlib-native is built, then the gzip on the host will be used and can fail if the libz in the buildtools is not compatible. Adding pigz to the build tools avoids this host contamination. Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30debugedit: fix segment fault while file's bss offset have a large numberHongxu Jia2
While ELF_C_RDWR_MMAP was used, elf_begin invoked mmap() to map file into memory. While the file's bss Offset has a large number, elf_update caculated file size by __elf64_updatenull_wrlock and the size was enlarged. In this situation, elf_update invoked ftruncate to enlarge the file, and memory size (elf->maximum_size) also was incorrectly updated. There was segment fault in elf_end which invoked munmap with the length is the enlarged file size, not the mmap's length. Before the above operations, invoke elf_begin/elf_update/elf_end with ELF_C_RDWR and ELF_F_LAYOUT set to enlarge the above file, it could make sure the file is safe for the following elf operations. [YOCTO #5356] https://bugzilla.redhat.com/show_bug.cgi?id=1019707 https://bugzilla.redhat.com/show_bug.cgi?id=1020842 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30cogl-1.0: depend on virtual/mesaAndreas Oberritter1
- Wayland support depends on wayland-egl, which is provided by mesa. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30rpm: Fix FILES_${PN}Richard Purdie1
In a recent commit, the FILES expression for rpm accidently moved a large portion of rpm-build into rpm: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=2e557556e03f4e86795cf331ccf06acd4c373045 Since rpm-build requires perl, this caused a number of build failures when the rpm-build package was attempted to be used since it references /usr/bin/perl. This commit restores the previous contents of the rpm package. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29scripts/oe-pkgdata-util: fix global name 'debug' is not definedPaul Eggleton1
This global variable is no longer present, so pass in the value specified via the command line. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29update-rc.d.bbclass: Fix host/target test in postinstJacob Kroon1
When running the postinst script I get a shell warning: sh: argument expected and the service is never stopped. This patch fixes the warning message and stops the service. Patch v2: Hans Beckérus pointed out that the patch is not correct. This version uses the syntax proposed by Hans. I've tested that the postinst script works correctly when run on the target, both when the init script exists and when it doesn't exist. Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29pcmanfm: upgraded to 1.1.2Valentin Popa2
Removed cross-compile-fix.patch; pcmanfm doesn't use xml-purge anymore. Tested on core-image-sato (qemuarm & qemux86). Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29grep: upgrade to 2.15Cristiana Voicu1
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29scripts: Add ksize.py and dirsize.pyDarren Hart2
Fixes [YOCTO #5388] These scripts can be useful when working to reduce the size of the Linux kernel and the root filesystem. ksize.py displays the kernel build size by the built-in.o files. dirsize.py displays the various sizes of the components of the root directory. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29libsoup: upgrade to 2.44.1Valentin Popa1
Tested with midori-browser on qemux86 and qemuarm. Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29libxv: upgrade to 1.0.10Valentin Popa1
Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29pseudo: fix library path in FILES_${PN}Roy Li1
libpseudo.so is always installed into ${prefix}/lib/, not ${libdir}, so fix these paths; and skip libdir WARN_QA checking to ignore the warning in 64bit and multilib enabled system Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29pulseaudio: Fix build break on armebKhem Raj1
There is no need for += when using append hence removed and added a leading space appropriately Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29tzcode & tzdata: update to 2013hJoe Slater2
Update recipes to version 2013h of timezone code and data. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29meta-toolchain-qt: put QT_CONF_PATH in environment scriptLaurentiu Palcu1
This will allow apps using QLibraryInfo class to find qt.conf. [YOCTO #5339] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29nativesdk-qt4-tools: create qt.conf fileLaurentiu Palcu1
When installing the SDK to another location than the default one, qmake will look for libraries, headers, etc. in the default location. That's because the paths are hard-coded in the binary itself. Luckily, QT allows to override this using a qt.conf file installed in the same directory with the application executable. However, we already have a patch that allows for the installation of qt.conf in another place and read the location from QT_CONF_PATH environment variable. Hence, install qt.conf in ${sysconfdir}. This will allow other apps, that use QLibraryInfo class, to find it. [YOCTO #5339] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29gnome: set UNKNOWN_CONFIGURE_WHITELISTRoss Burton1
This class disable introspection support using --enable-introspection=no but not all GNOME modules support introspection. This can cause unknown-configure-options QA warnings, so clarify the option by using --disable-introspection and add it to the sanity test whitelist. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29xorg-proto-common: set UNKNOWN_CONFIGURE_WHITELISTRoss Burton1
This include adds configure options globally but not all X libraries support them, so to avoid unknown-configure-option warnings add them to the whitelist. Also change the options from --enable-foo=no to --disable-foo as they're clearer and the whitelist would have to contain --enable-foo. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29openssh: upgrade to 6.3p1Paul Eggleton12
Removed the following backported patch(es): * mac.patch Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29ethtool: upgrade to 3.11Paul Eggleton2
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29cmake: upgrade to 2.8.12Paul Eggleton2
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29libgcrypt: remove --without-pthRoss Burton1
This isn't recognised by configure, and the random number daemon that requires Pth isn't enabled. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29gnome-common: inhert gnomebase not gnomeRoss Burton1
This recipe doesn't need any of the helpers that come with gnome (GConf, icons, MIME, etc), so just inherit gnomebase. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29xorg-lib-common: set UNKNOWN_CONFIGURE_WHITELISTRoss Burton1
This include adds configure options globally but not all X libraries support them, so to avoid unknown-configure-option warnings add them to the whitelist. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-28scripts/oe-pkgdata-util: add ability to find a recipe from a target packagePaul Eggleton1
Add a "lookup-recipe" command to show which recipe produced a particular package. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-28scripts/oe-pkgdata-util: add ability to look up runtime package namesPaul Eggleton1
Add a "lookup-pkg" command to oe-pkgdata-util that can be used to find the runtime name of a package (after e.g. Debian library package renaming). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-28scripts/oe-pkgdata-util: add ability to search for a target pathPaul Eggleton1
Add ability to search for a target path in produced packages, in order to find which package provides a specific file. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-28scripts/oe-pkgdata-util: check path arguments to ensure they existPaul Eggleton1
Show an error if the specified paths don't exist. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-28scripts/oe-pkgdata-util: improve help text and command line parsingPaul Eggleton1
* Use optparse to parse command line * Make help text actually helpful by describing what each command does * Drop comment at the top listing the commands which is now superfluous Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-28scripts/oe-pkgdata-util: remove remnants of former pkgdata structurePaul Eggleton1
OE-Core commit 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379 removed the vendor-os argument from the command line, and the code using the package architectures, so clean these items up. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-10-26pigz: bump to 2.3.1Maxin B. John3
Update pigz to latest release - 2.3.1 Drop ldflags.patch as it has been merged upstream Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-26harfbuzz: upgrade to upstream version 0.9.22Marko Lindqvist1
Code that was under ICU license has been removed. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-26cairo: upgrade to upstream version 1.12.16Marko Lindqvist2
png.patch dropped as it's part of upstream now Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-26gtk+: upgrade gtk+ to upstream version 2.24.22Marko Lindqvist13
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-26cracklib: cracklib-native should not depend on zlibKonrad Scherer1
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-26nfs-utils: nfsserver restart should kill and recreate nfsd kernel threadsQiang Chen1
nfsserver restart without killing kernel threads worked when portmap was the rpc publishing process and portmap was restarted. When rpcbind replaces portmap, nfsserver restart in this way does not work after an rpcbind restart. Steps to reproduce: 1). Make ext3 filesystem image on local host. cd /root dd if=/dev/zero of=test bs=1024K count=50 mkfs.ext3 -F test 2). runqemu qemux86-64 mkdir /mnt/wrtest mount -t ext3 -o loop test /mnt/wrtest echo "/mnt/wrtest *(sync,rw,no_subtree_check,no_root_squash)" > /etc/exports /etc/init.d/rpcbind restart /etc/init.d/nfsserver restart showmount -e localhost mkdir wrtest mount -t nfs localhost:/mnt/wrtest wrtest mount: mounting localhost:/mnt/wrtest on wrtest failed: Connection refused Modifying the nfsserver script to kill and restart kernel threads on restart makes the problem go away and is consistent with current RHEL/SUSE and Ubuntu/Debian mechanisms of handling the nfs server. Signed-off-by: Rich Dubielzig <rich.dubielzig@windriver.com> Signed-off-by: Qiang Chen <qiang.chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-30 13:57:00 +0000