| Age | Commit message (Collapse) | Author | Files |
|---|
|
* EXTRA_LDFLAGS isn't defined for !uclibc and configure fails
when it reads it unexpanded, see config.log snippet:
configure:4177: checking whether the C compiler works
configure:4199: i586-oe-linux-gcc -m32 -march=i586 --sysroot=/OE/sysroots/qemux86 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed ${EXTRA_LDFLAGS} conftest.c >&5
i586-oe-linux-gcc: error: ${EXTRA_LDFLAGS}: No such file or directory
configure:4203: $? = 1
configure:4241: result: no
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is used by debianutils.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by
glob are by default installed under their basename, as this is likely
most common use case. Target name for globbed entries specifies the
name of directory in which files will be installed withing the partition.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Check for malformed entries in IMAGE_BOOT_FILES, fail early if such
entries were found.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Most of /etc/init.d/udev-cache is in a conditional block which can be
replaced by a `[ ... ] || exit 0` to reduce nesting.
This also provides an opportunity to add some additional messages
when VERBOSE is set.
Capture and report errors encountered in the cache generation process,
using set -e and trap EXIT. These errors were previously being ignored.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
Don't hold up the boot while the cache is being updated.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
|
|
Presently, the cache is not regenerated if udev rules are modified,
which may cause the cache to preserve an old configuration. To fix,
include the size, mtime, and filename of all udev rules in the system
configuration.
This change requires `stat`. If busybox supplies stat,
CONFIG_FEATURE_STAT_FORMAT must be enabled.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
Failure to use the udev cache is a significant enough impact to
the boot time (possibly seconds) that it should always be
reported on the console, regardless of the VERBOSE setting.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
Replace a bunch of echo's with a single cat<<EOF. Take this opportunity
to more clearly communicate what is going on with the cache and what
files are being looked at.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
The current system configuration needs to be generated both inside
udev (to compare against the cached system configuration) and
udev-cache (to regenerate the cached system configuration). Use a single
function definition for this task, duplicated across both initscripts.
This also allows administrators to modify it for machine-specific
requirements.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
The udev initscript signals udev-cache to run by generating a new
sysconf; but udev-cache now overwrites that with its own copy. To
eliminate the needless sysconf generating in udev, we instead trigger
udev-cache to run by touching a new file $DEVCACHE_REGEN.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
Currently, udev-cache system configurations are compared as shell string
variables, read into memory with the readfiles() function. This is more
complex, and significantly (27-41%) slower, than comparing them using
`cmp`. (Performance was verified on both Cortex-A9 and Intel Nehalem
systems.)
So just use cmp. This requires a few other small changes:
exclude /proc/atags from CMP_FILE_LIST if it doesn't exist to avoid
errors in `cat` and `cmp`.
`cmp -q` doesn't exist in busybox, so instead, redirect output to
/dev/null.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
The validity of the udev cache is determined by the sysconf
file (/etc/udev/cache.data). Currently, there is a substantial delay
between sysconf generation in /etc/init.d/udev and cache generation in
/etc/init.d/udev-cache. If a hotplug event arrives in the middle of
this, then the sysconf will be out of date with respect to the cache.
The solution is two-pronged. First, we minimize the race window by
regenerating the sysconf immediately before the cache, in
/etc/init.d/udev-cache. This allows us to kill the race entirely by
stopping the udev event queue while the sysconf and cache are being
generated.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
|
|
Since the split out of git-perltools, some git tools (such as "git am",
"git send-email" and "git-submodule") have no longer been part of the
buildtools. We need these, so add them back in.
However, adding git-perltools to buildtools triggers perl itself being
brought into buildtools as well, and we don't want that; but we also
don't want to have to hack the git recipe or indeed anything else that
starts depending on perl. Thus, add a dummy package which gets installed
in its place, in a separate package architecture that is only enabled
for buildtools to ensure it doesn't start appearing in place of
nativesdk-perl anywhere else.
Fixes [YOCTO #7033].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Template unit files (those with '@' in their names) are not handled with
native version of systemctl. This is usually not a problem, as the
native systemctl fails and systemctl command is executed during first
boot. But some early boot template units may fail during first boot
because opkg configure for first boot is pulled too late for them
(although I encouter it only with some of my services, not with oe-core
ones).
Handling of template unit files is same as in original systemctl. Also
DefaultInstance directive in template is respected. As with original
systemctl, enabling of template without instance and DefaultInstance
does nothing.
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE =
"*GPL-3", libproxy could correct work.
[YOCTO #5592]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE =
"*GPL-3", PREFERRED_VERSION_db-native could have the correct value "5.%"
[YOCTO #5592]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
The whitelist processing in code in base.bbclass does not play well with
wildcards in INCOMPATIBLE_LICENSES. The code expects bad_licenses to
contain actual license names, not wildcards.
Add incompatible_license_contains to replace bb.utils.contains(
"INCOMPATIBLE_LICENSE", **, **, **, d)
[YOCTO #5592]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
It can be alarming to attempt to exclude GPLv3 from an
image but find that libstdc++ and libgcc still show it.
We indicate the license for each package to show libraries
that really are just GCC-3.0-with-GCC-exception.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Toaster will log all the files that it can find in the
deploy images directory, and list them, considering that
they may be artifacts of the current build not logged
anywhere else.
[YOCTO #6836]
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
PKG_CONFIG_PATH always defaults to /usr/lib/pkgconfig, and the host
/usr/lib/pkgconfig is always checked as a fallback; however,
PKG_CONFIG_PATH is currently (incorrectly) set to /usr/lib/pkg-config in
the sysroot, which doesn't exist. On host distros where the font
encoding maps are stored under a different path than OE, this will break
font builds, because ucs2any will attempt to read the sysroot's encoding
maps with the host paths.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A number of settings (DESCRIPTION, SUMMARY, postinst, postrm,
and appends to RDEPENDS) were made only if FILES_foo was not
set for a given package. If you had a modified glibc packaging
setup that was defining FILES_glibc-gconv-somelocale, this would
prevent the automatic append of glibc-gconv as a dependency,
because extra_depends was ignored.
I think the assumption may have been that if FILES_foo was set,
DESCRIPTION_foo and SUMMARY_foo would also be set, but it seems
to me that the right answer is probably to set them if they aren't
already set, and leave them alone if they are.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes build on systems using dash for default shell e.g.
errors like
run.do_strip.25842: [[: not found
| readelf: Error: Unable to read in 0x37 bytes of section headers
| readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
Change-Id: I29cac15be44a02d75a3d6889b6ae9b2e19bf46af
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For cpio/ramfs the kernel will first attempt to execute /init and will
emit the following error as the file is empty:
Failed to execute /init (error -13)
If /sbin/init exists symlink to it so the kernel can immediately start
the correct init executable instead of an empty file.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
shadow package configure step fails with this log output :
| checking location of faillog/lastlog/wtmp... (cached) /var/log
| checking location of the passwd program... (cached) /usr/bin
| checking for posix_spawn... no
| configure: error: posix_spawn is needed for nscd support
| Configure failed. The contents of all config.log files follows to aid debugging
| ERROR: oe_runconf failed
Signed-off-by: Baptiste DURAND <baptiste.durand@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
this also includes a fix for CVE-2014-8564.
see http://www.gnutls.org/security.html for CVE-2014-3566 "POODLE" statement.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Per commit f6587be6cd3dc864143b1c0be0bb8179a61dc835 (lttng-modules:
re-enable ARM builds) lttng-modules is fine for ARM now. Without this
additional change, tools-profile won't bring in lttng-modules when
targeting ARM.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using the export LD in the recipe does not allow for secodnary toolchain
overriding LD later, by setting it in the do_configure_append the export
is used by autotools setting LD based on the env, but would allow for
override later.
[YOCTO #6997]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
vte will pull in the gtk libs itself. This can cause build failures if
the native gtk was build with glib>=2.41 while the sysroot native glib
is <=2.40.
Fix for [YOCTO #7077].
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The autogen.sh script lies in the srcdir ($S) and is required to be run on git
based checkouts of gstreamer packages in order to generate initial
makefiles. So, we fix this by cd'ing to the specific dir, run the required
script and then come back to our initial dir which is builddir ($B).
Additionally rather than overriding the whole do_configure step we only _prepend
to make it clear what we are doing here.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For clarity use PACKAGECONFIG for the systemd and bluetooth optional features.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The RTMP plugin was non-deterministic, based on whether rtmpdump from
meta-multimedia had been built. Add a PACKAGECONFIG to resolve this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit 36d94ed631f1a753482282fced7d3b7505d5e03d ("serf: fix 'ccache'
builds") removed the source md5sum accidentally while resolving a
merge conflict.
Readd it.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Kang Kai <Kai.Kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is not used in oe-core and now has a new home in meta-gnome.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is now the procps-ng version
cleaned up patches
added to fix up usrbin_execprefix in OE-Core
Add CPPFLAGS to allow seperate build directory works
[YOCTO #6952]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
On a rebuild base.bbclass will invoke "make clean" to ensure that old build
objects are not used. This will delete docstrings.c and the only way to
re-generate that is with a dedicated setup.py target.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Update valgrind from 3.10.0 to 3.10.1 which is a bug fix release. It
fixes various bugs reported in 3.10.0 and backports fixes for all
reported missing AArch64 ARMv8 instructions and syscalls from the trunk.
Add dependency perl-module-file-glob for ptest subpackage.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The apr provides usr/share/build-1/libtool which is required by
the recipe such as apache2, and it will find grep on the host
and set absolute paths in libtool: GREP="/usr/bin/grep"
If we build apr/apr-native on a host that grep is in "/usr/bin/grep",
and re-use the sstate on another host with "/bin/grep", it will fail
when build apache2/apache2-native with:
| tmp/sysroots/x86_64-linux/usr/share/build-1/libtool: line 1093: /usr/bin/grep: No such file or directory
| tmp/sysroots/intel-x86-64/usr/share/build-1/libtool: line 1093: /usr/bin/grep: No such file or directory
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
midori has moved to cmake for configuration
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Obtain detain from following URL.
http://lists.gnu.org/archive/html/bug-cpio/2014-12/msg00000.html
http://git.savannah.gnu.org/cgit/cpio.git/commit/?id=746f3ff670dcfcdd28fcc990e79cd6fccc7ae48d
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
