| Age | Commit message (Collapse) | Author | Files |
|---|
|
Added parameter 'length' to specify amount of data
to write into destination file. This is useful when only
part of source file should be written into destination file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed bug in processing 'skip' parameter:
don't read input file if end of bmap block is less than skip
Simplified logic of positioning to the start of data inside a
partially skipped bmap block.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed code that reads /etc/mtools.conf, /etc/default/mtools.conf,
/etc/mtools and /etc/default/mtools to ensure that mtools output
doesn't depend on the global host configs.
It's still possible to use ~/.mtoolsrc config or point MTOOLSRC
environment variable to any configuration file if user want
to configure mtools.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A long time ago (6 years), this seemed like a good idea. The reality is
that OVERRIDES should not be being added to hashes and if it is, it likely
needs excluding in its own right. This was a nice workaround but we need
to fix the real underlying issues now. In some cases this means excluding
OVERRIDES from the variables dependency using the vardepsexclude flag however
caution is needed to ensure this is safe.
Variable values used to construct hashes are unexpanded but the values used
are computed after the application of OVERRIDES. The important detail is if
the end resulting unexpanded value changes, not the value of the OVERRIDES
used in the construction of that unexpanded value. This is why dependencies
on OVERRIDES itself shouldn't be in the hashes in general.
The recent DISTRO_FEATURES changes adding in override mappings for them
highlighted this issue. We have some good sstate tests which are effective
at highlighting where potential issues arrive with OVERRIDES contamination
(oe-selftest -r sstatetests.SStateTests).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the processing code for signature generation is now threaded,
use higher thread values as examples in this code for better performance.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
In common with the other package handling functions, don't depend on the
value of OVERRIDES. This means when we change MACHINE, we don't have to
repackage everything.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These have values set elsewhere and this code was overwriting them leading
to odd signature issues. Append instead preserving the original values.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The small module name was added to support run a whole suite that
has more that 3 levels in the test case name, but this broke the
behaviour for use a full test case name.
[YOCTO #11632]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The details of a test failure is upper on the unittest output
so don't log twice the actual failure.
[YOCTO #11622]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
0001-ip-Remove-unneed-header.patch is to fix build error
built with musl.
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes a following error:
| recipe-sysroot-native/usr/lib/rpm/debugedit: error while loading shared libraries: \
| libbz2.so.1: cannot open shared object file: No such file or directory
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- This matches the linker flags to compiler flags in purgatory
- Compile arm64 without PIC
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
musl unearthed a problem when building out of tree, config.h was being
used from $(srcdir) instead of generated config.h in $(builddir)
this assumed functions e.g. mallinfo() and more which are not in musl
as a result tests broke.
Also add fixes to build remaining tests when building on musl
pass -fno-pie as it cant use PIE especially in ptests/x86_64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uintptr_t is defined in stdint.h
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes build with musl and upcoming glibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop patches to ChangeLog, they are in patch
header anyway
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
No need to skip textrel QA for x86 as it has
been fixed in 1.25.0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This greatly reduces build times when there is a large amount of small
rpm packages to produce. The patches are rather invasive,
and so will be submitted upstream.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit aea90e9ee6f34e7c1c08307080b1e29646668df6.
RP hadn't meant to merge this yet and its causing problems so delay it until its
ready.
|
|
During the transition to dnf and rpm4, the functionality to
automatically make RPM determine dependencies was lost.
Before the transition, an OE specific tool called rpmdeps-oecore had
been added to the rpm suit. It was based on the rpmdeps tool that is
part of rpm. For each file specified on its command line, it would
output the provides and requires that RPM could determine.
During the transition to rpm4, rpmdeps-oecore was replaced with the
standard rpmdeps. However, what no one noticed was that unless rpmdeps
is given options, e.g., -P or -R, to tell it what it should output, it
will not output anything. Thus, it would do all the work to determine
the requirements, but would keep silent about it. And since no output
from rpmdeps is expected unless there are requirements, there were no
warnings indicating that everything was not working as expected.
Porting the old rpmdeps-oecore to work with rpm4 is not really
possible since it relied on being able to access internals of RPM that
are no longer available. However, it turned out that rpmdeps had a
debug option, --rpmfcdebug, that would output exactly the information
that we need, albeit in a different format and to stderr. To make this
usable, rpmdeps has now received a new option, --alldeps, which sends
the information we need to stdout.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will send the output from rpmfcPrint() to stdout. This is an
alternative to using the --rpmfcdebug option, which will send the same
output to stderr. The two options have totally different use cases
though. While --alldeps is used when the output from rpmfcPrint() is
what is wanted, --rpmfcdebug can be used together with the other
output options, e.g., --requires, without affecting their output.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tc.hasTargetPackage uses a re.search to see if gtk+3 is on
the manifest but + in regex means 1 or more causing the test
to be skipped.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The manifests for eSDK are generated using shared states so there is a
need to validate to different "packages names" into the test cases.
For example for perl:
SDK provides nativesdk-perl
eSDK provides perl-native
[YOCTO #9090]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add get_extra_sdk_info to reuse code in buildhistory
The functionalities to generate SDK and eSDK manifest files are different,
the SDK comes from package information and the eSDK comes from sstate artifacts.
Only execute write_sdk_{host, target}_manifest when is on populate_sdk class.
Adds new functions write_sdk{host, target}_ext_manifest to execute on postprocess
in populate_sdk_ext because at the end we have all the sstate artifacts to
generate the manifest.
[YOCTO #9038]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function is going to be used for generating the target and host
manifest files packages for eSDK. Added some fixes for buildhistory.bblclass,
and docstring for get_extra_sdkinfo at oe.sdk
[YOCTO #9038]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids the following warning:
warning: Ignoring invalid regex %{_docdir}
when runing `rpmdeps -R <file>`, since %{_docdir} is only defined when
parsing a spec file.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is nothing that requires, e.g., a DSO to be executable, but it
is still an ELF binary and should be identified as such.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than trying to call rpmdeps with the correct arguments to work
with the sysroot as was done in package.bbclass, create a wrapper for
it like all the other native tools already had.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a loop rather than calling create_wrapper for each individual
tool.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using RPM, depends.dot may contain dependencies such as
"/bin/sh", which will confuse _toaster_load_pkgdatafile(). Ignore
them. While at it, also ignore dependencies that contain parentheses,
e.g., "libc.so.6(GLIBC_2.7)".
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By using a single regular expression, the parsing of the depends.dot
file can be simplified a lot. This should also make it less
susceptible to formatting changes in that file.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Convert incorrectly formatted dependencies such as:
"bar -> "foo" ">=" "1.2.3"
into dependencies with edge labels:
"bar -> "foo" [label=">= 1.2.3"]
* Remove rpmlib() and config() dependencies such as:
"foo" -> "rpmlib(CompressedFileNames)" [label="<= 3.0.4-1"]
and:
"base-files" -> "config(base-files)" [label="= 3.0.14-r89.49"]
* Remove the trailing semicolon that was added to each line. It fills
no purpose.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes the file-rdeps test support:
* versioned dependencies, e.g., "perl (>= 5.000)", and
* package dependencies among the file dependencies, e.g., "perl".
It also ignores all "perl(...)" dependencies since it is expected that
these are generated and handled by rpm itself and there is no reason
to second guess what it is doing.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since we go through the trouble of copying the Python tests, we may as
well actually run them...
This also avoids the following QA issue:
ERROR: libxml2-2.9.4-r0 do_package_qa: QA Issue:
/usr/lib/libxml2/ptest/python/tests/push.py contained in package
libxml2-ptest requires /usr/bin/python, but no providers found in
RDEPENDS_libxml2-ptest? [file-rdeps]
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During the transition to RPM4, the package names returned by
RpmPM.list_installed() changed from the expected names of the packages
that were installed into the image to some fictitious source RPM
names.
This restores the original functionality so that the
installed-packages.txt files produced by inheriting buildhistory yet
again contains a list of the names of the installed packages.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enabling SSTATE_MIRRORS sometimes causes SRCREV values not
to be written/updated in the build history. This happens more
often if SRCREV is set to ${AUTOREV}
Explicitly writing SRCREVs when recipe history is being written
should fix this.
[YOCTO #10948]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
set() order is random and hence the filtered native/nativesdk DISTRO_FEATURES
could be set to random ordering. We've been lucky so far this tended not to
cause issues but some queued changes highedlighted this. Thrown in a sorted()
so the order is deterministic and we get consistent hash checksums between runs
and between machines.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Following the lead from Fedora (as suggested by Rob Clark) always enable
--enable-texture-float for all gallium drivers, but then modify the code to
not enable it, at runtime, where the implementation isn't backed by hardware.
The patch comes from unpacking fedora-25's mesa-17.0.5-3.fc25.src.rpm from
https://dl.fedoraproject.org/pub/fedora/linux/updates/25/SRPMS/m/
Somewhere along the path from OpenGL ES 2.0 to OpenGL ES 3.0 are some
algorithms that are encumbered by patents. These algorithms are enabled
with mesa's --enable-texture-float configure flag. However, if hardware
acceleration is being used and the hardware supports --enable-texture-float,
it means the hardware vendor has paid for the patents.
Note that with this solution, non-hardware gallium drivers (e.g. swrast) can't
--enable-texture-float, which might cause issues with some piglit tests.
This solution was discussed and agreed-to on the mailing list:
http://lists.openembedded.org/pipermail/openembedded-core/2017-May/137233.html
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The main intention is to provide easy-to-use and read helper functions
for including files only when certain distro features are
set. Functionally they are the same as bb.utils.contains and
bb.utils.contains_any.
Distro features are part of the base configuration and thus safe to
use for conditional inclusion in recipes and bbappends, in contrast to
recipe variables which might still change during parsing. Therefore
the check is limited to DISTRO_FEATURES. This is the reason for having
this in OE-core instead of bitbake.
Default values are set so that no redundant parameters have to be
passed for conditional includes. As a secondary usage, the functions
can also be used in boolean checks.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As discussed in "[Openembedded-architecture] Yocto Compatible 2.0 +
signature changes", changes in .bbappend must depend on some explicit
configuration change, typically selecting a distro feature.
For _append and _remove, adding an override that is set only when the
corresponding entry is in DISTRO_FEATURES achieves that:
In local.conf:
DISTRO_FEATURES_append = " my-distro-feature"
In layer.conf:
DISTRO_FEATURES_OVERRIDES += "my-distro-feature"
In a .bbappend:
do_install_append_df-my-distro-feature () {
...
}
The subset of DISTRO_FEATURES that are made available as overrides
must be configured explicitly because using them this way should
be a conscious decision.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPC ports (also known as rpc program numbers) are values:
- given to rpcbind (aka portmapper) to allow nfsv3 clients that don't
know the tcp/udp port number of nfsd and mountd to look it up the
tcp/udp port number, and to
- allow a single transport (ie: tcp/udp port) to provide multiple
sunrpc services.
OE has carried patches to nfsutils & linux for some time to support the
mountprog & nfsprog options.
In the case of runqemu-export-rootfs, we don't need to use custom rpc
program numbers because runqemu-export-rootfs tells unfsd not to
register with the portmapper, and unfsd runs the nfs and mount rpc
services on tcp/udp ports unfsd binds itself (iow: the tcp/udp ports are
not shared in the sunrpc sense).
Linux's nfs client does not query rpcbind when tcp/udp port numbers are
specified (in net/sunrpc/clnt.c, call_bind checks for the tcp/udp port
with xprt_bound() and skips the call to rpcbind if xprtsock.c's
xs_setup_udp() or xs_setup_tcp() has found a non-zero tcp/udp port).
The program numbers _are_ sent over the mount & nfs protocol (really,
over sunrpc), and checked to match at both ends. As a result, even when
rpcbind is unused, using different program numbers in unfsd vs linux
nfs client causes mounts to fail (and nfsroot mounts to timeout).
The result is that specifying custom program numbers in
runqemu-export-rootfs doesn't solve any conflicts, it simply requires
that users of runqemu-export-rootfs carry a kernel patch & adds 2 extra
parameters to the kernel command line unnecessarily.
Change runqemu-export-rootfs to use the default program numbers.
For now, I have not dropped the custom program number patches to linux,
nfs-utils, and unfsd just in case someone is using them in a
non-runqemu-export-rootfs context.
CC: Bruce Ashfield <bruce.ashfield@gmail.com>
CC: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When testing core-image-sato with hardening flags, it fails with
SIGSEGV in libc.so during relocation time
This is due to relocations in .text [textrel]
build QA points it out clearly during qemux86 build as well
AssertionError: 2 != 0 : Log: /mnt/a/oe/build/tmp/work/qemux86-bec-linux-musl/core-image-sato/1.0-r0/dmesg_output.log
-----------------------
Central error: [ 19.043597] rngd[525]: segfault at 80098bb7 ip b77b14fc sp bfe9b380 error 7 in libc.so[b774c000+97000]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
1. Upgrade gnutls from 3.5.9 to 3.5.13
2. Rebase the following patch file.
use-pkg-config-to-locate-zlib.patch
Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Note that this just removes a host path leakage: diffutils still
doesn't depend on coreutils so 'pr' might not actually be there
on image (this only breaks "diff -l" so no big deal).
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The commit 51d32c6cd88ba0139c32793183fd6a236c1ef456 in
git://github.com/rpm-software-management/librepo.git
...
Author: Tomas Mlcoch <tmlcoch@redhat.com>
Date: Mon May 5 14:31:35 2014 +0200
Add LRO_SSLVERIFYPEER and LRO_SSLVERIFYHOST options (RhBug: 1093014)
...
It incorrectly setopt CURLOPT_SSL_VERIFYPEER for LRO_SSLVERIFYHOST.
Use CURLOPT_SSL_VERIFYHOST to correct.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We put the bitbake command line in the buildhistory commit message for
informational purposes, but calling sys.argv to get that as we were
previously doesn't really work in memory resident mode - that gives you
the command used to start the bitbake server which is much less
interesting. Use the just-introduced BB_CMDLINE variable instead.
Part of the fix for [YOCTO #11634].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We really don't want the just-introduced BB_CMDLINE influencing the
config hash.
Part of the fix for [YOCTO #11634].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
