summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2014-07-23busybox: mdev: Ensure /dev/initctl exists after tmpfs mountBen Shelton1
During boot, there is a brief window during which /dev/initctl is missing, which breaks initscripts that would need to access it. This occurs because /etc/init.d/mountall.sh (rcS.d/S02...) attempts to ensure /dev/initctl is present, but /etc/init.d/mdev (rcS.d/S06...) mounts over /dev and clobbers the work done by mountall, and then does not wait synchronously until initctl is ready before continuing. To close this window, in /etc/init.d/mdev, we check whether /dev/initctl is present, and if not, we remove it and recreate it. This is the same thing that is done by /etc/init.d/mountall.sh, and we have verified that any writers of /dev/initctl will wait synchronously until sysvinit notices the change in fd and does the read, so no race exists. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23busybox: mdev: Use mdev.seqBill Pittman1
/dev/mdev.seq exists to synchronize concurrently running instances of mdev and to ensure that they execute in the proper order. Without this synchronization, it is possible to have inconsistent mount points, to leak device nodes, or to have a node erroneously removed in rapid hotplug scenarios. Enable the use of mdev.seq by creating an empty /dev/mdev.seq at boot. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23busybox: mdev: Make /dev/shm world-writableGratian Crisan1
Otherwise, users cannot use named semaphores or shared memory. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23mkefidisk.sh: Remove initrd entry for gummibootDarren Hart1
My previous patch adding gummiboot support was missing the line to remove the initrd line from the boot config. This was an oversight in copying over the grub setup to gummiboot. Add the necessary logic to remove it. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23connman: Fix PPTP VPN plugin QA issueJukka Rissanen2
This error was seen when building ConnMan. Fixed by not building ConnMan pptp plugin with module versioning info. ERROR: QA Issue: non -dev/-dbg/-nativesdk package contains symlink .so: connman-plugin-vpn-pptp path '/work/core2-32-oe-linux/connman/1.24+gitAUTOINC+42779cd63c-r20/packages-split/connman-plugin-vpn-pptp/usr/lib/connman/scripts/libppp-plugin.so' [dev-so] ERROR: QA run found fatal errors. Please consider fixing them. ERROR: Function failed: do_package_qa Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23image.bbclass/rootfs.py: add variables to rootfs[vardeps]Roxana Ciobanu2
Added base variables and package backend specific variables to rootfs[vardeps] in order for rootfs to rebuild when changes are made. Set some variables as [func] to inform bitbake that they are shell scripts, so that it invokes its shell dependency parsing. Without marking them as functions, changes in the actual function body would not trigger rootfs rebuilds. [YOCTO #6502] Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-21wget: Remove unneeded DEPENDS lineRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-21alsa-tools: Disable use of GTK+ when not using X11Otavio Salvador1
The GTK+3 does not provide support for DirectFB backend so we cannot enable GTK+ features of alsa-tools in this case; GTK+2 does not provide support for Wayland. This patch changes GTK+ support to be enabled only when X11 support is enabled. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-21buildtools-tarball: Add wget to buildtools-tarballTudor Florea4
GNU Wget cannot be upgrated to a newer that 1.12 version on supported Centos distro. GNU Wget 1.12 and earlier uses a server-provided filename instead of the original URL to determine the destination filename of a download. This means the files downloaded when fetching cannot be properly used: $ wget http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz $ ls eventlog_0.2.13.tar.gz?AWSAccessKeyId=AKIAICTJ5MANGPMOH7JA&Expires=1400838672&Signature=TjakOBpOvHtEKKDgF14iVinWpY0= This in turn lead to build errors like: WARNING: Failed to fetch URL http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz, attempting MIRRORS if available ERROR: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz&#39;. The fetch command returned success for url http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz but /path/to/downloads/eventlog_0.2.13.tar.gz doesn't exist?! ERROR: Function failed: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz&#39;. Unable to fetch URL from any source. ERROR: Logfile of failure stored in: /path/to/tmp/work/ppce500v2-enea-linux-gnuspe/eventlog/0.2.13-r0/temp/log.do_fetch.28302 ERROR: Task 4 (/path/to/poky/meta-openembedded/meta-oe/recipes-support/eventlog/eventlog_0.2.13.bb, do_fetch) failed with exit code '1' [YOCTO #6549] Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-21shadow: Add PACKAGECONFIG for acl/attrRichard Purdie1
Otherwise builds are not deterministic. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-21libomxil-0.9.3: Remove versioning for .so files.Drew Moseley2
The so files installed by libomxil are not versioned and should be installed without version-based symlinks so that omxregister-bellagio can properly find and register them. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19rootfs: Remove the extraneous install directorySaul Wold1
The /install/tmp diectory is created during installation by the smart package manager, we need to clean it up here [YOCTO #6497] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19pseudo: uprev to 1.6.1Peter Seebach2
Pseudo now automatically tries to shut down the server after running single commands under pseudo ("pseudo <cmd>"), which means it can print a useless "server already offline" message in some cases. The message has been changed to a debugging message only. The glibc symbol versions for memcpy were being applied to non-x86 targets, unintentionally, which broke builds for at least some targets. (But pseudo doesn't usually get built for targets so it didn't get noticed right away.) Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19kernelshark: Remove trace-cmd from the kernelshark packageDarren Hart1
Fixes [YOCTO 6550] Images installing both trace-cmd and kernelshark would fail with: error: file /usr/bin/trace-cmd conflicts between attempted installs of kernelshark-1.2+git0+7055ffd37b-r3.core2_32 and trace-cmd-1.2+git0+7055ffd37b-r3.core2_32 This patch removes ${bindir}/trace-cmd from the install prior to packaging, as is already done with the ${datadir}. Reported-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> (cherry picked from commit eb08ae8f729ef77329892d19b23ddfdaa7953de0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19libatomics-ops: Extend to nativesdkRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19grub_git: bump version, remove patchTrevor Woerner2
A previously upstreamed patch has been applied. Bump the version to incorporate this upstream update. Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19xf86-video-intel: disable non-deterministic tests for libX11Ross Burton2
libX11 et al are checked for at confgure time and tests optionally built. As these don't get installed we don't want to add build dependencies, but the non-determinism means that builds can fail. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19qemu: security patch for CVE-2014-3471Daniel BORNAZ2
Qemu PCIe bus support is vulnerable to a use-after-free flaw. It could occur via guest, when it tries to hotplug/hotunplug devices on the guest. A user able to add & delete Virtio block devices on a guest could use this flaw to crash the Qemu instance resulting in DoS. Originated-by: Marcel Apfelbaum <address@hidden> Updated the qemu recipe to include the security patch. Upstream-Status: Submitted Signed-off-by: Daniel BORNAZ <daniel.bornaz@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19oprofile: backport two patches to support e500mc/e6500Ting Liu3
Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19strace: fix 64 bit process detectionTing Liu2
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19python-numpy: add support for powerpc64 architectureTing Liu3
Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19insane.bbclass: avoid QA errors for n32 kernelMing Liu1
A series of commits had been integrated to avoid qa checking code throwing the bitsize not matched error for x32 kernel files, the same logic is also needed by n32 kernel which was not addressed in that series. This commit extends the condition for n32 kernel files. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19diffstat: update to version 1.59Chong Lu4
Remove unneeded patches, since they're included in new version. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19gcc: update *LIBC_* linker relocation reglexTing Liu1
* GLIBC_DYNAMIC_LINKER64 reglex does not work for rs6000/linux64.h, update it. * it turns out that UCLIBC_DYNAMIC_LINKER reglex will strip the 32/64 chars from UCLIBC_DYNAMIC_LINKER64/UCLIBC_DYNAMIC_LINKER32, add '\b'. my two PCs: Centos 6.5 (python 2.7.5) and Fedora 13 (python 2.7.3) Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19openssh: use pidfile in initscriptRichard Tollerton1
Stopping sshd must only kill the listening (top-level) daemon; it must not stop any other sshd process, because those are forked ssh connections which may include e.g. the connection that called /etc/init.d/sshd stop. This initscript uses "start-stop-daemon -x <exe>" for starting/stopping. When that is provided by busybox, this behavior is broken: `/etc/init.d/sshd stop` stops *all* sshd processes. This was caused by a fix to busybox 1.20: 17eedcad9406c43beddab3906c8c693626c351fb "ssd: compat: match -x EXECUTABLE by /proc/pid/exe too". The fix is to use a pidfile. All initscripts in upstream openssh do this, as does dropbear. Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Ken Sharp <ken.sharp@ni.com> Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19eglibc: rewritten tzselect as posix sh and move it to tzcode packageHongxu Jia3
The problem is that this would cause bash installed to meta-toolchain, the dependencies chain is: meta-toolchain -> eglibc-utils -> bash We should eliminate bash dependencies in anything core to a tiny system. The eglibc-utils also provides eglibc-utils/usr/bin/zdump, eglibc-utils/usr/bin/zic which all of them belonged to tzcode, so we should split these three utils as tzcode package. [YOCTO #6544] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19busybox: enable CONFIG_FEATURE_AWK_LIBM by defaultHongxu Jia1
It was required by tzselect which is provided by eglibc utils. The eglibc is a fundamental package, so enable math functions of awk is reasonable. Here is the error if we not enable that: ... root@qemuarm:~# tzselect -c +4852+00220 awk: cmd. line:39: Math support is not compiled in ... [YOCTO #6544] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19default-distrovars/multilib: update license whitelists to use canonical namesRoss Burton2
Now that all licenses are canonicalised to SPDX names when processing, we need to rename the whitelists to the match. [RP: Fixed up multilib.bbclass too] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19license.bbclass: canonicalise licenses when dealing with INCOMPATIBLE_LICENSERoss Burton2
If INCOMPATIBLE_LICENSE=GPL-3.0 but the recipe sets LICENSE=GPLv3, the current code won't trigger because they're different strings. Fix this by attempting to canonicalise every license name to a SPDX name, so both names in this example become GPL-3.0. [ YOCTO #5622 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19scripts/test-remote-image: use the scriptpath moduleCorneliu Stoicescu1
Use the scripts/lib/scriptpath module in order to standardize the adding of bitbake/lib and meta/lib to sys.path. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19scripts/oe-selftest: add command-line parsing and optionsCorneliu Stoicescu1
[YOCTO #6453] Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Reduce output and add verbose flagDarren Hart1
Remove superfluous output from commands, add a -v verbose flag, and cleanup output. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Make the rootfs copy the last stepDarren Hart1
Copying the rootfs is the most time intensive task. Move it last so if we are to encounter other errors, we do so quickly and error out. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add die() and cleanup() routinesDarren Hart1
Currently the script will attempt to continue even after a fatal error. Add a die() routine which will abort in the case of a fatal error and call a cleanup() routine to unmount any images or devices and remove the TMPDIR. Move the variable assignment and directory creation earlier in the script, making it more obvious what we need to clean up. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Improve loggingDarren Hart1
Add logging functions: error, warn, info, and success, using tput to add color highlighting. Use these routines throughout the script, replacing echo statements and adding "|| error" in several places to eliminate silent failures. Add a simple exit block which checks for issues encountered while running. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Copy the EFI dir recursivelyDarren Hart1
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir recursively. This allows for custom configurations to be enabled implicitly with no extra work required. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add gummiboot supportDarren Hart1
Fixes [YOCTO 6295] Add gummiboot support for images built using: EFI_PROVIDER="gummiboot" Add conditional configuration for GRUB and gummiboot. Provide some messaging about which is being performed. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add mount error checkingDarren Hart1
Provide reasonable feedabck if the mount commands fail. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Use all caps for volume namesDarren Hart1
Avoid some mkfs warnings by using all caps in the volume names. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: Add support for /etc/default/urandomRichard Tollerton1
Source /etc/default/urandom if present. This allows the rootfs to remain read-only while enabling the user to override the location of the random seed file. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: make hostname.sh coreutils-compatibleRichard Tollerton1
inetutils and busybox hostname utils support `hostname -F`; coreutils hostname doesn't. So just use `cat` instead. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: Use current date as an additional source of entropyKen Sharp1
If the seed file is empty or does not exist, the date is an extremely poor backup source of entropy, but it is better than nothing. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: parametrize random seed file locationRichard Tollerton1
Currently, the random seed file location is hardcoded to /var/lib/urandom/random-seed. Refactor it to a parameter (RANDOM_SEED_FILE) so the file location is defined in only one place. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: save /etc/timestamp with seconds accuracyBlair Elliott3
Currently, /etc/timestamp is saved with minutes accuracy. To increase the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and read /etc/timestamp respectively with seconds accuracy. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19initscripts: bootmisc.sh: Make sysctl -p honor VERBOSERichard Tollerton1
busybox sysctl may lack the "-q" setting, so simulate it with redirects. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19rpm: compile rpmqv.c instead of rpmqv.ccJoe Slater2
Some versions of gcc will put a reference to __gxx_personality_v0 into rpm.o and rpmbuild.o. This means we must link using g++, and Makefile does not. Go back to using rpmqv.c (which is currently identical to rpmqv.cc). Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19libgpg-error: fix pkgconfig.patchTim Orling1
Typo in pkgconfig.patch: -Libs: -L{libdir} -lgpg-error vs. +Libs: -L${libdir} -lgpg-error This patch fixes failure in libgcrypt-native do_configure. | ../x86_64-linux-libtool: line 6001: cd: {libdir}: No such file or directory | x86_64-linux-libtool: link: cannot determine absolute directory name of `{libdir}' Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19grub-core: fix endianness problemShan Hai2
Fix tftp stalls on loading files bigger than ~32k bug by cherry picking a patch from grub upstream. Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19lz4: update to latestArmin Kuster1
update to version r119 LICENSE md5sum changed since it was updated in r117 for copyright date change Fixes CVE-2014-4611 Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19common-mingw: force ac_cv_func_mmap_fixed_mapped=noRichard Tollerton1
The expat mingw build breaks because ix86-common defines ac_cv_func_mmap_fixed_mapped=yes, causing the build to think that mmap(), mman.h actually exist. Fix this by always forcing the variable to "no", which configure would have concluded without such interference. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-12 19:57:10 +0000