| Age | Commit message (Collapse) | Author | Files |
|---|
|
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The commit changes the oe-core oprofile recipe by adding the PTEST
interface, implementing do_compile_ptest() and do_install_ptest().
The install routine adds several files that only the regression tests
require. Also, a patch is necessary to inhibit executing the tests on
the build host and to point to the correct target directory for the
libutil++ test 'file-manip-tests'.
That test requires the recipe to set SRCDIR in the build environment
instead of determining the value from build-time host paths as for a
self-hosted build.
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The dgawk and pgawk commands no longer exist in gawk 4.1 onwards, replaced by
options to gawk.
Remove the dgawk and pgawk binary packages, and merge gawk-common into gawk as
it is needless splitting.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixed:
rm: cannot remove `/path/libgcrypt-1.6.1/m4/*.m4': No such file or directory
We would meet this error if we stop the configure and run again.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
python-gst needs python shared library in python config directory.
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
'set -x' is added to package postinstall scripts. It causes trace
information are printed when image first time boots such as core-image-sato.
Remove it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Adding support for postconfig option to the bitbake() and related methods.
This enables us to use 'bitbake -R postconfig_file <command>'.
Usage: bitbake(cmd, postconfig="some confguration")
'postconfig_file' would contain what we add in 'postconfig'
Other methods affected: get_bb_env(), get_bb_var()
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
${libexec} doesn't necessarily equals to ${libdir}/${BPN}. So fix
this problem by using ${libdir}/${BPN} in FILES variable.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Hit a ICE and could reduce it to the following minimal example:
1. Only the size of array assigned with 2 caused the issue:
$ cat > mipgcc-test.c << END
int main (int argc, char **argv)
{
char *pStrArry[ARRAY_SIZE_MAX] = {"hello"};
int i = 0;
while(pStrArry[i] && i<ARRAY_SIZE_MAX)
{
printf("%s\n", pStrArry[i]);
i++;
}
return 0;
}
END
2. Only -O1 and -g on mips caused the issue:
$ mips-poky-linux-gcc -O1 -g -o mipgcc-test mipgcc-test.c
mipgcc-test.c: In function 'main':
mipgcc-test.c:18:1: internal compiler error: in dwarf2out_var_location, at dwarf2out.c:20810
}
^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions
[YOCTO #6034]
3. The quick workround is trying to enlarge the size of array with larger
than 2.
4. File a bug to GNU, but it could not be reproduced on there environment.
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=60643
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a PACKAGECONFIG for DRI3 but don't enable it yet.
Based on a patch by Valentin Popa <valentin.popa@intel.com>.
[YOCTO #6402]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libdricore was removed and replaced with a megadriver with hardlinks from the
old driver names.
Add PACKAGECONFIG for DRI3 but disable by default as there are currently
regressions compared to DRI2.
License is unchanged.
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
glapi/gen needs the libxml2 Python module, but this isn't listed as a build
dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tests are installed to $libexecdir not $libdir/glib-2.0. By default these
are the same location but they can be changed independently.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tests are installed to $libexecdir not $libdir/gdk-pixbuf. By default these
are the same location but they can be changed independently.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add some missing dependencies and fix the Makefile in order to get most
of the ptest tests working (specifically test_bn, test_verify, test_cms,
test_srp and test_heartbeat). test_verify still fails for unknown
reasons (perhaps some of the now expired certificates weren't meant to
have expired as far as the test is concerned?) but at least it has the
certificates to run now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fixes the following security issues:
* CVE-2014-0224
* CVE-2014-0221
* CVE-2014-0195
* CVE-2014-3470
The patch for CVE-2010-5298, CVE-2014-0198 and a fix for building the
documentation are integrated upstream in this release and so were
dropped. Additionally, a patch from upstream was added in order to
fix a failure during do_compile_ptest_base.
A similar upgrade was also submitted by Yao Xinpan <yaoxp@cn.fujitsu.com>
and Lei Maohui <leimaohui@cn.fujitsu.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If wic is running as raw mode, it's better to check if BBLAYERS
is valid before inspect it.
No functional changes.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix 'for' statement identention so plugin type directory will be
added only once in layers_dirs list.
No functional changes.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the interface is slow to come up udhcpc will continue in the background
[YOCTO #6339]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These dependcies are needed to ensure that thier packages are created
correctly since these classes have runtime dependiences in their packages
but they are not actually created yet at rootfs time.
[YOCTO #6072]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
importlib isn't currently included in any of the python packages, so
create a new one for recipes that require it.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade autogen-native from 2.18.2 to 2.18.3.
A patch is made to fix the compilation error.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade file from 5.17 to 5.18.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running 32bit code on a large filessytem with 64bit inodes, the
fontcache was not being created correctly because an EOVERFLOW was being
returned from the fstat when reading the 64 inode on a 32bit system.
The fontcache is created at rootfs time on the host system via qemu.
[YOCTO #6338]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running 32bit code on a large filessytem with 64bit inodes, the
fontcache was not being created correctly because an EOVERFLOW was being
returned from the fstat when reading the 64 inode on a 32bit system.
The fontcache is created at rootfs time on the host system via qemu.
[YOCTO #6338]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The usual autoheader warning is due to AC_DEFINE variables not having a
description. This results in no variable being defined in config.h, which leads
to code behaving as if the test failed when it actually succeeded.
This patch was introduced to OpenEmbedded back in 2004:
http://git.openembedded.org/openembedded/commit/?id=5eab06d132cb2895fd579f5cedffbb54c27794f8
There is no rationale for the patch so I suspect this is due to the warnings
being fatal and the submitter not understanding that the problem is more than
cosmetic.
(From OE-Core rev: de5fb9d7f60763082327ddeca71842c00a2fa23e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We enable the python module in nativesdk-libxml2, but the python binary
used is in the native sysroot and thus you get the module installed in
the wrong path. Even with that fixed the python files are still
unpackaged, so create an ${PN}-python package and add them to it. (This
does not affect the libxml target build at all since python is disabled
for that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libarchive's configure script looks for ext2fs/ext2_fs.h in order to use
some defines for file attributes support if present (but doesn't link to
any additional libraries.) There is no configure option to disable this,
and if e2fsprogs is rebuilding between do_configure and do_compile you
can currently get a failure. Because it doesn't need anything else from
e2fsprogs, and e2fsprogs isn't currently buildable for nativesdk anyway,
copy the headers in from e2fsprogs-native which we're likely to have
built already (and add it to DEPENDS just to be sure we have.)
Fixes [YOCTO #6268].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
for neard tools/snep-send object might cause a
parallel build failure,due to undetected
dependency on dbus.h header file.
Patch will be submitted upstream.
Fixes [YOCTO #6389].
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade gawk from 4.0.2 to 4.1.1.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
importlib isn't currently included in any of the python packages, so
create a new one for recipes that require it.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A Gstreamer library which provides an API to create an RTSP server (e.g. to stream RTP to VLC clients and similar).
Tested, works with GStreamer 1.2.3 + videotestsrc based pipeline on RPi.
Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The alloca() function allocates space in the stack frame of the caller,
so using alloca(new_size - old_size) would possibly crash the stack,
causing a segment fault error.
This patch fixes the above problem by avoiding using this function in
journal-file.c.
[YOCTO #6201]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The LICENSE has no change, except a newline added.
Fix do_compile failed:
| tools/gen_test_char > include/private/apr_escape_test_char.h
| /bin/sh: tools/gen_test_char: No such file or directory
| make[1]: *** [include/private/apr_escape_test_char.h] Error 127
The tools/gen_test_char was invoked at build time, and it didn't
work for the cross compiling, so we built it with $BUILD_CC.
To make sure there was no side effect on the change, not adding this
patch, I did the test:
1. Built the native tools/gen_test_char on x86-64 host, and invoke
it on that host;
2. Built the target tools/gen_test_char which arch was arm, and invoke
it on the qemuarm;
3. Comparing the results, they were total the same;
...
/* this file is automatically generated by gen_test_char, do not edit. "make include/private/apr_escape_test_char.h" to regenerate. */
static const unsigned char test_char_table[256] = {
32,30,30,30,30,30,30,30,30,30,31,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,6,16,63,22,17,22,49,17,
17,17,1,16,16,0,0,18,0,0,0,0,0,0,0,0,0,0,16,23,
55,16,55,23,16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,23,31,23,23,0,23,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,23,23,23,17,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,
30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30
};
...
Fix do_install failed:
| DEBUG: Executing shell function do_install
| NOTE: make -j 16 DESTDIR=tmp/work/x86_64-linux/apr-native/1.5.1-r0/image
install
| tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh tools
| gcc -isystem/home/pokybuild/yocto-autobuilder/yocto-slave/build-appliance/
build/build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe
tools/gen_test_char.c -o tools/gen_test_char
| make[1]: Entering directory `tmp/work/x86_64-linux/apr-native/1.5.1-r0/
apr-1.5.1'
| tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh tools
| gcc -isystem/home/pokybuild/yocto-autobuilder/yocto-slave/build-appliance/
build/build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe
tools/gen_test_char.c -o tools/gen_test_char
| tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh
include/private
| tools/gen_test_char > include/private/apr_escape_test_char.h
| /bin/sh: tools/gen_test_char: Permission denied
Remove the 'tools' dir creation, it always existed. And it caused
gen_test_char unexpected rebuilt at do_install time.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
readline hand-maintains config.h.in so exclude autoheader and re-use a patch
from readline-6.3 to fix a typo in variable names.
See oe-core 8c37d32d6133c6ad2b9142e7a42775e7a979b570 against readline-6.3 for
further rationale.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to
acinclude.m4 at configure time. We don't need the fork now that autoheader is
excluded.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade grep from 2.18 to 2.19.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Updated Ross's install-examples.patch to current
** AM_CPPFLAGS changes no longer needed
** example_DATA = ... redhand.png no longer needed
** minor line # changes
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Announcement:
http://lists.freedesktop.org/archives/cogl/2014-March/001636.html
* License changed from LGPL to MIT
* kms-include-stddef.h-before-drm.h.patch fixed upstream
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify mesa demo apps to respect the DEMOS_DATA_DIR
configuration parameter for locating data files.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add some data files that are present in the git repository:
http://cgit.freedesktop.org/mesa/demos/tree/?id=mesa-demos-8.1.0
but not in the release tarball
ftp://ftp.freedesktop.org/pub/mesa/demos/8.1.0/mesa-demos-8.1.0.tar.bz2
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the "--with-system-data-files" when configuring mesa-demos
so that the data files in /usr/share/mesa-demos/ will be properly
located at run time.
Copy some additional data files into the target filesystem.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
moved build data to an inc file since it changes little.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes affecting code
zic no longer generates files containing time stamps well before
the Big Bang.
This works around GNOME bug 730332
<https://bugzilla.gnome.org/show_bug.cgi?id=730332>.
(Thanks to Leonardo Chiquitto for reporting the bug, and to
Arthur David Olson and James Cloos for suggesting improvements to
the fix.)
Changes affecting documentation
tz-link.htm now mentions GNOME.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
