summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2018-06-15gcc-8: enable build-id in gcc-cross-initialRichard Purdie1
Apply patch from Taras Kondratiuk <takondra@cisco.com> to gcc 8.x too. Normal gcc-cross has build-id feature enabled by default, so most of target binaries has build-id. But libc (glibc, musl) doesn't have build-id, because it is built with gcc-cross-initial. Build-id is a useful feature, so enable it for gcc-cross-initial too. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15gcc: enable build-id in gcc-cross-initialTaras Kondratiuk1
Normal gcc-cross has build-id feature enabled by default, so most of target binaries has build-id. But libc (glibc, musl) doesn't have build-id, because it is built with gcc-cross-initial. Build-id is a useful feature, so enable it for gcc-cross-initial too. Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15site.conf.sample: document oe-git-proxy required tools for HOSTTOOLSLeonardo Sandoval1
The script oe-git-proxy uses some tools that may not be included on HOSTTOOLS, thus add the proper documentation. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15libdrm: drop uclibc-specific patchRoss Burton2
This patch isn't needed for musl or glibc, so drop it. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15send-error-report: decode response from serverRobert Yang1
Fixed: b'Your entry can be found here: http://<snip>' Now looks like: Your entry can be found here: http://<snip> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15ltp: fix CVE-2017-5669 test caseNaresh Kamboju2
Adding CVE-2017-5669 test fix patch which is accepted upstream in LTP repo. Ref: cve-2017-5669: shmat() for 0 (or <PAGESIZE with RND flag) has to fail with REMAPs https://github.com/linux-test-project/ltp/pull/324 Upstream-Status: Accepted [https://github.com/linux-test-project/ltp/pull/324] Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15liberror-perl: upgrade 0.17025 -> 0.17026Tim Orling1
* Upstream release notes: " May 23 2018 <shlomif@shlomifish.org> (Shlomi Fish) Error.pm #0.17026 - Convert to Dist-Zilla. " * Tested on qemux86: all tests pass Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15maintainers: add Andrej Valek as busybox maintainerRoss Burton1
Andrej has kindly stepped up as the busybox maintainer. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15busybox: remove myself as maintainer.Armin Kuster1
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15popt: update SRC_URIArmin Kuster1
It appears the rpm5.org has been down for some time, switch to fossies WARNING: popt-native-1.16-r3 do_fetch: Failed to fetch URL http://rpm5.org/files/popt/popt-1.16.tar.gz, attempting MIRRORS if available Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15xinetd: Fix systemd service for systemd>237Ricardo Ribalda Delgado1
SystemD 237 implements a stricted PIDfile handling that breaks several daemons [1]. Change the way we start xinetd, mimicing other distros [2]. Fixes: root@qt5122:~# journalctl -u xinetd -- Logs begin at Fri 2018-05-25 14:33:29 UTC, end at Mon 2018-06-11 07:33:08 UTC. -- May 25 14:33:31 qt5122 systemd[1]: Starting Xinetd A Powerful Replacement For Inetd... May 25 14:33:31 qt5122 systemd[1]: xinetd.service: Permission denied while opening PID file or unsafe symlink chain: /var/run/xinetd.pid Jun 11 07:27:24 qt5122 systemd[1]: xinetd.service: Start operation timed out. Terminating. Jun 11 07:27:24 qt5122 systemd[1]: xinetd.service: Failed with result 'timeout'. Jun 11 07:27:24 qt5122 systemd[1]: Failed to start Xinetd A Powerful Replacement For Inetd. Jun 11 07:31:38 qt5122 systemd[1]: Starting Xinetd A Powerful Replacement For Inetd... Jun 11 07:31:38 qt5122 systemd[1]: xinetd.service: Permission denied while opening PID file or unsafe symlink chain: /var/run/xinetd.pid Jun 11 07:33:08 qt5122 systemd[1]: xinetd.service: Start operation timed out. Terminating. Jun 11 07:33:08 qt5122 systemd[1]: xinetd.service: Failed with result 'timeout'. Jun 11 07:33:08 qt5122 systemd[1]: Failed to start Xinetd A Powerful Replacement For Inetd. [1]: https://github.com/systemd/systemd/issues/8085 [2]: https://github.com/felixonmars/archlinux-community/commit/e49040636737fdb09031e75ec4d73a580f80676b Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15bitbake-blayers/create: add version for example recipeAnuj Mittal1
Add version field in recipe name for example recipe created by bitbake-layers. Fixes [YOCTO #12767] Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15uboot-extlinux-config.bbclass: Add baudrate in console bootparamOtavio Salvador1
By default, we ought to use console="${console},${baudrate}" as console bootparam as commonly it is left to be passed with the bootargs. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15trace-cmd: add PACKAGECONFIG for auditDengke Du1
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15glibc: fix CVE-2017-18269 and CVE-2018-11236Zhixiong Chi3
Backport two CVE patches from the upstream https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=summary commit 5460617d1567657621107d895ee2dd83bc1f88f2 commit cd66c0e584c6d692bc8347b5e72723d02b8a8ada Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15man-pages: inherit manpagesKai Kang1
Inherit manpages to update manual file index caches after installation for man-pages. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15manpages.bbclass: Update RDEPENDS and post install scriptsKai Kang1
If a package installs manual files, it should update manual index cache after its installation. Add package 'man-db' to RDEPENDS which contains command 'mandb' to update the cache. And do the update in the post install scripts. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15cpio: fix CVE-2016-2037Andre McCurdy2
"The cpio_safer_name_suffix function in util.c in cpio 2.11 allows remote attackers to cause a denial of service (out-of-bounds write) via a crafted cpio file." https://nvd.nist.gov/vuln/detail/CVE-2016-2037 Note that there appear to be two versions of this fix. The original patch posted to the bug-cpio mailing list [1] is used by Debian [2], but apparently causes regression [3]. The patch accepted to the upstream git repo [4] seems to be the most complete fix. [1] https://lists.gnu.org/archive/html/bug-cpio/2016-01/msg00005.html [2] https://security-tracker.debian.org/tracker/CVE-2016-2037 [3] https://www.mail-archive.com/bug-cpio@gnu.org/msg00584.html [4] http://git.savannah.gnu.org/cgit/cpio.git/commit/?id=d36ec5f4e93130efb24fb9678aafd88e8070095b Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15cpio: rely on texinfo.bbclass for texinfo-native dependencyAndre McCurdy1
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15cpio: move contents of cpio_v2.inc into the cpio recipeAndre McCurdy2
Merge contents of cpio_v2.inc into the only recipe which uses it. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15qemu: don't inherit autotoolsRoss Burton1
qemu doesn't use autotools, so don't inherit it and just call 'make install' directly. No need to alter makefiles anymore, as they appear to respect CFLAGS now. Remove a chmod of beginend_funcs.sh (a file we patched in, and removed, many years ago). Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15wayland: fix upstream release checkingRoss Burton3
Wayland has moved to GitLab with the result that /releases/ no longer returns a directory listing, so the upgrade detection doesn't work. The upgrade detection can scan releases.html just as well, so tell it to look there. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15icecc-toolchain: Remove environment setupJoshua Watt1
The handling of the environment setup was moved to the post-relocate script handler, and so is no longer necessary in the setup script Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15systemd: allow setting time-epoch to epochDan McGregor1
systemd by default sets the system time at boot to the date of its NEWS file. It provides the option to change that at build time, and some projects need to come up at a particular date if no RTC is present. Provide the option to set the time at boot to the epoch instead of the date of the NEWS file. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15Add license file EPL-2.0Nicola Lunghi2
it is from: https://www.eclipse.org/org/documents/epl-2.0/EPL-2.0.txt And add 'EPL-2.0' to SRC_DISTRIBUTE_LICENSES. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15rpcbind: add option to make user able to use fixed port numberLi Wang2
Add option "-p" to specify fixed port number Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15wpa-supplicant: fix the bug for PATCHTOOL = "patch"Hong Liu10
When switch PATCHTOOL to patch, applying 'key-replay-cve-multiple.patch' failed: checking file src/ap/ieee802_11.c checking file src/ap/wpa_auth.c checking file src/ap/wpa_auth.h checking file src/ap/wpa_auth_ft.c checking file src/ap/wpa_auth_i.h checking file src/common/wpa_common.h checking file src/rsn_supp/wpa.c checking file src/rsn_supp/wpa_i.h checking file src/rsn_supp/wpa.c Hunk #1 FAILED at 709. Hunk #2 FAILED at 757. Hunk #3 succeeded at 840 (offset -12 lines). Hunk #4 FAILED at 868. Hunk #5 FAILED at 900. Hunk #6 FAILED at 924. Hunk #7 succeeded at 1536 (offset -38 lines). Hunk #8 FAILED at 2386. Hunk #9 FAILED at 2920. Hunk #10 succeeded at 2940 (offset -46 lines). Hunk #11 FAILED at 2998. 8 out of 11 hunks FAILED checking file src/rsn_supp/wpa_i.h Hunk #1 FAILED at 32. 1 out of 1 hunk FAILED checking file src/common/wpa_common.h Hunk #1 succeeded at 215 with fuzz 1. checking file src/rsn_supp/wpa.c checking file src/rsn_supp/wpa_i.h checking file src/ap/wpa_auth.c Hunk #1 succeeded at 1898 (offset -3 lines). Hunk #2 succeeded at 2470 (offset -3 lines). checking file src/rsn_supp/tdls.c checking file wpa_supplicant/wnm_sta.c checking file src/rsn_supp/wpa.c Hunk #1 succeeded at 2378 (offset -62 lines). checking file src/rsn_supp/wpa_ft.c checking file src/rsn_supp/wpa_i.h Hunk #1 succeeded at 123 (offset -5 lines). So split the wpa-supplicant/key-replay-cve-multiple to 8 patches. Signed-off-by: Hong Liu <hongl.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15nettle: do the multilib_header magic for nettle-stdint.h and version.hChangqing Li1
add multilib support for this receipe, or it will conflicts in mutlilib setting Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15cpan_build.bbclass: tell Module::Build the replacementJens Rehsack1
Instead of patching Module::Build, maybe Module::Build::Tiny and all other similar tools, use the official way to tell them which is the target perl on target. (From OE-Core rev: f3925216b06ff7fbe21989210f8eb11e16be6631) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15cmake: fix Upstream-Status tag spellingRoss Burton6
Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15attr/acl: disable make cleanRoss Burton1
These packages use hand-grown makefiles which don't handle cleans as they can invoke /usr/bin/gmake directly which may not exist. Until new upstream releases are made (which have ported to automake) set CLEANBROKEN to work around this. [ YOCTO #12775 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15glib: add PACKAGECONFIG for libelfRoss Burton1
gresource-tool has optional support for using libelf to extract resources from ELF files, so add a PACKAGECONFIG in case someone wants this. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15sysklogd: fix typo in RCONFLICTSChen Qi1
It should be RCONFLICTS_${PN} instead of RCONFLICTS_${PN}-syslog. There's no ${PN}-syslog package. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-06-15boost: Improve reproducibilityMingli Yu2
Set .file section explicitly for .S files to avoid the linker introduces the host path in symbols for object files whose source file is .S Otherwise, there is a host path in the symbols as below: $ readelf --wide --symbols /my-build/boost/1.67.0-r0/boost_1_67_0/x86_64-poky-linux/boost/bin.v2/libs/context/build/aca09349fdb84d131321425f6c3a38ed/libboost_context.so.1.67.0 42: 0000000000000000 0 FILE LOCAL DEFAULT ABS /my-build/boost/1.67.0-r0/boost_1_67_0/x86_64-poky-linux/boost/bin.v2/libs/context/build/aca09349fdb84d131321425f6c3a38ed/asm/make_x86_64_sysv_elf_gas.o [YOCTO #12708] Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15sqlite3: consistent set of features for nativesdkS. Lockwood-Childs1
Enable use of pread() and enable column metadata API for nativesdk builds. This brings nativesdk in line with target and native builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15coreutils: fix nativesdk install failureS. Lockwood-Childs1
The change "fix hostname conflict with other packages" moved the hostname util to the list of base_bindir_progs, so do_install_append() now expects hostname to have been built. coreutils do_install_append() is shared between target and nativesdk builds (though not used by native build, see comment) so hostname should be enabled to build on both of them. Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15ltp: set -fomit-frame-pointer explicitly for x86-64Mingli Yu1
Since ltp contains x86-64 assembler which uses the frame-pointer register, it will trigger below error when build ltp with -fno-omit-frame-pointer on x86-64. | cve-2015-3290.c: In function 'child_thread': | cve-2015-3290.c:416:1: error: bp cannot be used in asm here And there is also some comment as below in the source file ltp/20180515-r0/git/testcases/cve/cve-2015-3290.c * Build with -O2. Don't use -fno-omit-frame-pointer. So explicitly set -fomit-frame-pointer on x86-64 for compiler to fix the above build error. Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-15tclibc-newlib: Adds a new TCLIBC variant to build with newlib as C libraryAlejandro Enedino Hernandez Samaniego4
This patch adds the posibility to build using TCLIBC=newlib. It allows users to build baremetal applications with the use of a C library. Newlib is a lightweight C library meant to be used on embedded systems, it is meant to be easily portable for new platforms and to provide basic functionality on them, by design, it provides stubs for some of these core functions declared as weak, so they can be built correctly and then linked against some other library which provides specifics about the platform being used if need be, libgloss takes care of these in some cases, but it can also be extended, this patch also allows the user to easily add other libraries to it by adding them to NEWLIB_EXTENDED for this specific reason. Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
2018-06-15insane.bbclass: Adds powerpc to elf headers machine dictionaryAlejandro Enedino Hernandez Samaniego1
This patch adds makes it possible to build elf for powerpc by adding this combination to the elf headers machine dictionary, this can be useful when trying to build baremetal applications where the TARGET_OS=elf Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
2018-06-15newlib: Adds newlib and libgloss recipesAlejandro Enedino Hernandez Samaniego6
Newlib is a C library that is intended to be used on embedded systems. It is a conglomeration of several library parts, all under free software licenses that make them easily usable on embedded products. Newlib provides a C library alternative that can run on baremetal, mainly for resource constrained devices. Libgloss is the BSP part of the C library, which can be easily modified to port for new hardware platforms. Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
2018-06-15yocto-uninative: Update to version 2.1Richard Purdie1
This fixes issues with fontforge-native. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11linux-yocto/4.14/4.15: fix gcc8 mips compilation issuesBruce Ashfield6
Making the following commit available to fix mips gcc8 build issues: commit e25dbfe95302eeaa1a03a828d05c09479574488a Author: Kevin Hao <kexin.hao@windriver.com> Date: Mon Jun 11 18:17:54 2018 +0800 MIPS: Use '+=" instead of '=' to avoid the CFLAGS override We used the CFLAGS_xxx to workaround the gcc 8 build warnings for some specific file. But CFLAGS_xxx is also used with '=' in other places of this Makefile. This override the gcc 8 workaround, so replace all the '=' with '+=" to fix this issue. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11linux-yocto/4.15: crypto: aes-generic - fix aes-generic regression on powerpcBruce Ashfield3
Integrating the following upstream commit to fix gcc regression: crypto: aes-generic - fix aes-generic regression on powerpc commit 6e36719fbe90213fbba9f50093fa2d4d69b0e93c upstream My last bugfix added -Os on the command line, which unfortunately caused a build regression on powerpc in some configurations. I've done some more analysis of the original problem and found slightly different workaround that avoids this regression and also results in better performance on gcc-7.0: -fcode-hoisting is an optimization step that got added in gcc-7 and that for all gcc-7 versions causes worse performance. This disables -fcode-hoisting on all compilers that understand the option. For gcc-7.1 and 7.2 I found the same performance as my previous patch (using -Os), in gcc-7.0 it was even better. On gcc-8 I could see no change in performance from this patch. In theory, code hoisting should not be able make things better for the AES cipher, so leaving it disabled for gcc-8 only serves to simplify the Makefile change. Reported-by: kbuild test robot <fengguang.wu@intel.com> Link: https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg30418.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651 Fixes: 148b974deea9 ("crypto: aes-generic - build with -Os on gcc-7+") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11systemd: fix build with gcc8Martin Jansa2
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11gcc-sanitizers: don't use thumb for armv[45]Martin Jansa1
* otherwise it fails with: sanitizer_linux.s:5749: Error: lo register required -- `ldr ip,[sp],#8' @ 1538 "../../../../../../../../../work-shared/gcc-8.1.0-r0/gcc-8.1.0/libsanitizer/sanitizer_common/sanitizer_linux.cc" 1 swi 0x0 cmp r0, #0 bne 1f ldr r0, [sp, #4] ldr ip, [sp], #8 blx ip mov r7, #1 swi 0x0 1: mov r0, r0 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11gcc-runtime_8.1.bb: disable ifuncs in libatomic for arm archKhem Raj1
This will solve the mcpu/march conflicts we get when -mcpu=cortex-a7 is passed on cmdline since it will become incompatible with default ifuncs in libatomic which is using armv7-a Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-11tcmode-default: Switch to gcc 8.xKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-08gcc-8: Enabled mspe options for rs6000 ppc backendKhem Raj2
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-08gcc-8: Disable float128 for ppc/muslKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-08gcc-8: Disable libssp for non mingw targetsKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-29 11:21:39 +0000