summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-04-10rpm-postinsts: avoid errors during boot with read-only-rootfs enabledPaul Eggleton1
* If /etc/rpm-postinsts doesn't exist, don't error * If deleting the script errors, don't bother printing it (this will always happen if the root filesystem is read-only) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10rpm-postinsts: don't create broken postinst scriptPaul Eggleton1
Not only was the variable reference in this line broken, but it wasn't going to work anyway - we install the script directly into /etc/rcS.d and not into /etc/init.d, so the code in update-rc.d.bbclass couldn't find anything there. This resulted in a postinstall script for rpm-postinsts being created in /etc/rpm-postinsts which can't work when the root filesystem is read-only. To simplify things just remove the use of update-rc.d.bbclass since we don't really need the added complexity here. Fixes [YOCTO #4222]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10tinylogin: Fix mix of tabs and spaces for SRC_URI indentationMartin Jansa1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10systemd: use update-alternatives.bbclassRadu Moisan1
switch from using plain update-alternatives command to update-alternatives.bbclass style Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10qemu script: explicitly set 32 bit depth for x86-64Alexandru DAMIAN1
This patch is the same as 6c22c591374d258228f74814cded34a24b4bf2d3, but for x86-64 targets which exhibit the same problem. Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests, whereby previously only 32bit depth was supported. However, the new support is broken, so we force 32bit depth in all cases. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10busybox: fail on no mediaSaul Wold2
The current behaviour of busybox is to try all fstype when automounting even when no media exists. The util-linux mount command bails when no media exists, so change the behaviour of busybox to do the same. It could also be argued that the KERN_INFO message from btrfs could be removed, but that would be harder to accomplish. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10postinst-intercepts, qemu.bbclass: fix segfaults in postinstallsLaurentiu Palcu6
Postinstalls that use qemu are throwing a segmentation fault when building for qemux86-64 on a 64bit host (it might also happen for qemux86 if building on a 32bit host but I didn't test). It looks like qemu looks for ld.so.cache which is not found because it is generated after rootfs_(rpm|ipk|deb)_do_rootfs is called and then it tries to load libraries from the default paths (which are the host's). In order to avoid this, pass the LD_LIBRARY_PATH explicitly to the target's dynamic loader. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10update-rc.d: correctly look up the initscript params with overridesRoss Burton1
The creation of a clone of d with extra OVERRIDES was removed in 72c1fd72d3b479c728e249eaa763116d352e945b but some of the lookups are essential so that variables such as ${INITSCRIPT_PARAMS} get overriden and resolved correctly on a per-package basis. [ YOCTO #3960 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10initrdscripts: Add udev sbin based libexec pathRichard Purdie2
For better or worse we need to use base_sbindir for udev's libexec dir. This updates the initrdscripts to also cover the new location. I'd prevously assumed that it was already covered but its not. udev internal binaries shouldn't be in PATH so we have to do this to deal with the issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10classes/license: remove outdated commentPaul Eggleton1
Package listing was implemented in the deb backend some time ago. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10meta-*/conf/layer.conf: tweak BBFILES commentPaul Eggleton3
"packages" was the old name (pre-2010) under which the recipe files were stored. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-10meta/recipes.txt: add recipes-lsb4Paul Eggleton1
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09udev: fix init script for the location of udevdSaul Wold3
Ensure we can update the script base don the location of the udevd installation Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09systemd.bbclass: restart service in postinst, not startRoss Burton1
When upgrading packages it's possible that the service is already running because opkg doesn't actually execute the prerm hooks on upgrades, which is where the service should be stopped. Handle this case by restarting in postinst instead of starting. If the service isn't already running then this doesn't make a difference, but if it is running then the service will be restarted. [ YOCTO #4213 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09udev: Move udevd back to /sbinRadu Moisan2
Along with v182 upgrade udevd was moved to ${base_libdir} making scripts like init-live.sh to fail in finding udevd. We have some problems here since the placing binaries into either libdir breaks the way our multilib handling works. That code and its associated sanity tests assume that libdir contains binaries of a particular architecture and that these are not allowed to overlap. This is in contrast to the bindirs where conflicts are expected and handled appropriately. So whilst upstream may desire this directory layout, it won't work for OE's usage of it and we need to configure udev differently. The scripts already have fallback code to handle udev in the two locations so there is no issue is going back to our previous layout. [Yocto #4046] Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09qemuimagetest/scenario: Move dmesg to end of test runRichard Purdie15
The dmesg test detects segfaults. This is useful information to have and if one occurs in one of the earlier tests, this can aid debugging. Move the dmesg test to the end of the list of tests so we gain the extra debug info in those cases. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09base.bbclass: Fix matching of MACHINEOVERRIDES in COMPATIBLE_MACHINEOtavio Salvador1
The use of SOC_FAMILY here is old code and SOC_FAMILY is now implemented by MACHINEOVERRIDES behind the scenes. It therefore makes more sense to use the replacement value in this code. Just like SOC_FAMILY, this is a ":" delimited variable so we should iterate over the components, not use the value directly. Finally, MACHINEOVERRIDES contains MACHINE so we don't need to check that directly. This makes the functionality match what most users would expect it to do and is also compatible with the way things previously worked. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09oe-buildenv-internal: Only add to $PATH if neededPeter Kjellerstedt1
First strip $PATH of any existence of the paths needed by Open Embedded and BitBake. Then add the needed paths at the beginning. This makes sure the needed paths are searched first, without growing $PATH unnecessarily if oe-init-build-env is rerun for a directory for which it has previously been run. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09libpng12: remove prefer version and add it to lsb packagegroupKang Kai2
Because rename libpng_1.2.50 to libpng, remove the perfer verion from default-versions.inc and add libpng12 to lsb packagegroup. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09libpng12: rename libpng_1.2.50 to libpng12Kang Kai1
As Mark's suggestion, rename libpng_1.2.50 to libpng12 that multi-versions libpng could coexist. We want to make sure we have both the old and new versions to meet LSB compliance (for people who have that enabled) as well as the new version for newer applications. And drop link files that conflict with higher version. [YOCTO #4221] Signed-off-by: Kang Kai <kai.kang@windriver.com> CC: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09openssl: Upgrade to v1.0.1eRadu Moisan20
Dropped obolete patches and pulled updates for debian patches. Addresses CVEs: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-2686 http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-0166 http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-0169 [YOCTO #3965] Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09classes/buildhistory: fix interaction with rm_workPaul Eggleton1
Change do_write_srcrevs to a postfunc of do_fetch, avoiding a dependency being created that causes large numbers of setscene tasks being executed on every build with both buildhistory and rm_work being enabled. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09rpm: fix RDEPENDSLaurentiu Palcu1
The rpm-postinsts runtime dependency was overwritten. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-09qemu: Add backported patch to address random segfaultsRichard Purdie2
We've been seeing random sefgaults on a variety of architectures which appear to be from an issue in qemu. The attached backport from upstream appears to fix these. [YOCTO #4216] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08oe-buildenv-internal: Only add to $PATH if neededPeter Kjellerstedt1
If $PATH already has the needed paths at the beginning, there is no need to add them again. This allows rerunning oe-init-build-env for the same directory without having $PATH increase unnecessarily every time. Signed-off-by: Peter Kjellerstedt <pkj@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08alsa-tools: Fix sys/io.h patchSaul Wold1
I blew my #if expression! Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08kernel.bbclass: do_sizecheck: update path to build image and do not deleteMichel Thebeau1
do_sizecheck has a few issues especially with vmlinux image type. It breaks because KERNEL_OUTPUT is a path relative to ${B}. When do_sizecheck runs it does not find the file (because the working directory is elsewhere) and does not fail. Also, the image file referenced by KERNEL_OUTPUT may be a link. Finally, when do_sizecheck deletes the oversized kernel image it leaves the previously run do_compile task with inaccurate status. So, do the following: - specify that the working directory should be ${B} - use ls -L to reference to the real file, and ensure that the link file is created - keep the oversized image file so the status of do_compile is valid [YOCTO #3514] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08layer.conf: add systemd-serialgetty to SIGGEN_EXCLUDERECIPES_ABISAFEMartin Jansa1
* it was imported from meta-systemd without SIGGEN_EXCLUDERECIPES_ABISAFE change Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08scripts/oe-pkgdata-util: find complementary packages for split packagesPaul Eggleton1
Check after getting the original package name (e.g. undoing Debian renaming) if there is a complementary package for that name, e.g. if the glob is *-dev, then libudev0 -> libudev -> libudev-dev. Fixes [YOCTO #4136]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08bluez4: add readline dependencyAlexandru DAMIAN1
bluez4 uses readline to be build, but the dependency is not listed This is listed in the configuration log. So we add it. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08systemd: Set the default firmware path to enable firmware loading in udevHolger Hans Peter Freyther2
After some breakage in udev the kernel gained direct firmware loading. For older kernels (e.g. 3.2 in my case) udev still needs to load the firmware. Firmware loading is enabled once a default firmware path is set. Apply a compile fix from the upstream project. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08tcf-agent: Use kill instead of killproc to stop agentIoana Grigoropol2
When shutting down a core-image-lsb-sdk image, there is a lot of time spend stopping tcf-agent, which slows down the whole process. The reason for this slowdown is the fact that it tries in a loop to kill tcf-agent service by using killproc with the path of the executable and killproc does not seem to available in lsb images. This patch fixes the issue by using "kill" instead of "killproc". [Yocto #3928] Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com> Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08smart: disable CHANNELSDIRBogdan Marinescu2
Make CHANNELSDIR in smart empty, since this causes host contamination issues on some RPM-based hosts on which smart is already installed. [YOCTO #3881] Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08gtk-update-icon-cache-native: create wrapper scriptLaurentiu Palcu1
When using the sstate from another build machine, the path to the pixbuf loader's cache points to a path on the remote machine. Hence, the update of the icon cache fails on host. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08image.bbclass: fix postinstall intercepts fallbackLaurentiu Palcu1
The wrong type of paranthesis was used so 'continue' did nothing (was in another context) and the packages were marked as installed. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08gst-ffmpeg: fix --disable-yasmTom Zanussi1
The gst-ffmpeg build shows the following warning: configure: WARNING: unrecognized options: --disable-yasm which means that the following test in configure always fails and --disable-yasm never gets passed to the embedded ffmpeg build: 'if test "x$disable_yasm" = "xyes"; then' embffmpeg_configure_args="$embffmpeg_configure_args --disable-yasm" commit 4d309730 ['gst-ffmpeg: configure-fix patch used wrong test'] actually fixed the obviously backwards syntax by reversing the test - prior to that, --disable-yasm would always unconditionally be passed into the embedded ffmpeg config. This fixes things so that the variable actually exists and makes the test meaningful. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08insane.bbclass: Updated MicroBlaze machine definitionsNathan Rossi1
* Removed existing definition with machine 47787, this definition is outdated, a sanity error should occur if an ELF uses this value. * Added new definition with machine 189. This value replaces the existing value since August 2009. See binutils thread for more information. (http://sourceware.org/ml/binutils/2009-08/msg00127.html) Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-06qemuimage-tests/sanity/boot: Increase timeoutRichard Purdie1
As we've increased the parallelisation on the build servers, we've started to see core-image-minimal sanity test boot failures where the network never comes up. We don't see those failures for core-image-sato, its always minimal. Looking at the results, it can take ~100 seconds for the network to come up, even on the sato images if the machine has a high load. The timeout for the boot test is only 120 seconds compared to 400 on every other test. This change makes the timeout equal for all the tests at 400 seconds in the hope that the load on the autobuilder is causing the sanity tests to run slowly and hence triggering the false negatives. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05oe-init-build-env: Make it use the correct $OEROOT with zshPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <pkj@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05oe-setup-builddir: Allow $OECORENOTESCONF to not existPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <pkj@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05curl: backport patch to fix segfaultsMartin Jansa2
* e.g. ecore, efreet segfault a lot without this patch Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05linux-yocto-tiny: Add 3.8.4 recipeDarren Hart1
Bring linux-yocto-tiny up to the latest linux-yocto 3.8.4 version. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05local.conf.sample: Add info about -ptest package groupMaxin B. John1
Add information about ptest package testing in local.conf.sample file. Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05linux-firmware: make the main package depend on all sub-packagesRoss Burton1
Whilst splitting out specific large firmware blobs is a good move for space saving, it makes installing "all the firmware" tricky. Make linux-firmware depend on all of the separated packages so that installing that pulls in all of the sub-packages. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05shadow: add patch to fix crypt: Invalid ArgumentSaul Wold2
This patch came from Slackware and address a change in crypt()'s handling of an invalid seed, which in the past returned an encrypted string and now returns a NULL. [YOCTO #4097] related to tinylogin segfault Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05tinylogin: fix segfault from crypt()Saul Wold2
In glibc 2.17, crypt() now expects 2 valid chars for the seed or it will error out and return a NULL. The tinylogin code took the result from crypt directly into a strcmp() which caused a segfault Tinylogin has been deperacted, busybox now has login support, I will investigate using busybox login support for 1.5. [YOCTO #4097] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05sanity/connman: when connman test fails, dump syslogRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05qemuimage-testlib: add function to fetch the remote syslogRoss Burton1
Add a new function to scp from the target, and another to fetch /var/log/messages and dump it to the console. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05qemuimage-testlib: silence some key warningsRoss Burton1
Set StrictHostKeyChecking to no to silence the fingerprint warnings, and instead of creating a temporary file for the known hosts and then deleting it just use /dev/null. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05connman_test.sh: show all processes when dumping psRoss Burton1
We know the grep failed because the error case is being executed, so don't do the grep again when attempting to help diagnose the problem, as seeing the full process list might be useful. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-04 02:15:25 +0000