summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2014-02-02ltp: update SRC_REV to LTP 20140115 releaseFathi Boudra1
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-02kernel.bbclass: Fix empty modules directory QA issueNathan Rossi1
If a kernel is built without any external modules (aka no CONFIG_*=m), then during a modules_install of the kernel an empty directory is created at /lib/modules/${KERNEL_VERIONS}/kernel. This is behaviour of the kernel infrastructure, the directory would normally be populated with the modules that were built. However because of the expectations of kernel-modules-split, no packages are created when there are no modules and an empty directory lingers. This raises QA issues as warning or errors (depending on the distro). The following patch changes the kernel_do_install task to check if the directory is empty and if so removes it. Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-02syslinux: fix booting memtest86+ using pxelinux regressionJonathan Liu5
After syslinux was updated from 4.07 to 6.01, booting memtest86+ using pxelinux would fail: PXELINUX 6.01 2013-07-04 Copyright (C) 1994-2013 H. Peter Anvin et al Loading memtest86... ok Booting kernel failed: invalid argument This backports the necessary upstream patches to allow memtest86+ to boot using pxelinux again. [YOCTO #5501] Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-02unfs3: Fix compile regression from unfs3 portJason Wessel1
A line got dropped from the original patch when porting to the latest unfs3. The regression was introduced in commit 7d8075c64 (unfs3: Fix dependencies and allow target builds). This patch restores the missing line from the original which had been working fine for over a year's time. --- a/Config/Makefile.in +++ b/Config/Makefile.in @@ -12,7 +12,9 @@ all: lib.a lib.a: $(OBJS) $(AR) crs lib.a $(OBJS) -y.tab.h y.tab.c: exports.y +y.tab.h: y.tab.c + +y.tab.c: exports.y $(YACC) -d exports.y Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-31gcc: Include patch scheduled for GCC 4.8.3 to fix epilogue on ARMHolger Hans Peter Freyther2
GCC 4.8.0, 4.8.1 and 4.8.2 can generate broken epilogues for the ABI used by the kernel. Apply the patch that is included for GCC 4.8.3 from http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854. The issue was found on Yocto/Dora and the patch should be backported to this branch. A kernel built with Dora's GCC 4.8.1 misbehaved on: while true; do (for i in `seq 1 100`; do echo "Log message... $RANDOM"; done) | logger; done busybox's syslogd would from time to read a huge negative value and then exit, strace would get stuck waiting on a syscall. After this patch it appears to work better. Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-31libtool: Set CONFIG_SHELL for nativesdkRichard Purdie1
We're seeing similar failures that we saw from libtool-native and libtool-cross where /bin/sh changed from bash to dash on different machines after sstate reusage. This patch fixes nativesdk to avoid the same issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-30db: Fix libtool linking against local libstdc++.soTyler Hall1
Building the C++ bindings in a484b35b818768487ff27cf06b8c5d4e128126af introduced this error on systems with /usr/lib/libstdc++.so present: /usr/lib/libstdc++.so: file not recognized: File format not recognized The shipped libtool is sysroot aware, so pass --with-sysroot so it will extract the sysroot from the compiler. Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-30cogl: Place the patch in the correct directoryRichard Purdie1
Otherwise this causes parsing warnings and build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29toaster.bbclass: save original package nameAlexandru DAMIAN1
If we can get the original package name when reading package infos in toaster.bbclass, we save it for proper referincing in the toater ui. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29documentation.conf: update task descriptionsBarros Pena, Belen1
This patch updates the task descriptions in documentation.conf It also has a bunch of grammar fixes for the variable descriptions. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29package.bbclass: Show which files require given dependency in debug outputMartin Jansa1
* when log.do_package shows some unexpected dependency, people usually need to grep package directory to find which binary was creating that dependency, show it directly in the debug output Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29package.bbclass: Don't search for providers of PRIVATE_LIBSMartin Jansa1
* split PRIVATE_LIBS and don't use find(), so that libfoo cannot be found in PRIVATE_LIBS = "libfoobar" Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29cogl: kms: include necessary header for size_tAndreas Oberritter2
Fixes compilation in cases where stddef.h is not already included by EGL headers. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29unzip: Pass LDFLAGS to the linkerMikhail Durnev2
Change Makefile to use LDFLAGS Signed-off-by: Mikhail Durnev <Mikhail_Durnev@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29oeqa/runtime: smart: fix adding channelsStefan Stanacar1
Without this it won't add core2-64 and similar channels, as the directory name in deploy_dir/rpm uses _ not - as the package arch. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29oeqa/runtime: drop restartTarget methodStefan Stanacar4
Restart is a property of a specific target, not of a test class, should a test really need to restart the target the direct method should be called. Also some tests used this to enforce more ram, which makes sense only for qemu targets only (and the inital reason this was needed isn't valid anymore, qemu machines had the default ram size bumped a while ago). Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29qemu: Allow building without X11 supportJonas Eriksson1
To enable the construction of minimal hypervisors based on OE, it is important to be able to build qemu without it requiring X support. By checking that the distro is built with the x11 feature before adding virtual/x11 to the dependencies, this is made possible. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-29unfs3: Fix dependencies and allow target buildsJason Wessel10
Fixed in this patch: * All patches marked as submitted to the upstream * Remove the pseudo dependency because unfs3 can fully stand alone or be used with pseudo and it does not link against pseudo * Dependencies to flex for nativesdk and target builds are fixed such that unfs3 can be deployed into an image * Add unfs3 references in separatebuilddir.inc because unfs3 works correctly with autotools. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28pkgconfig: Drop glibconfig from SRC_URI to unbreak builds after previous commitRichard Purdie2
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28pkgconfig: remove out-dated configure options and dependenciesRoss Burton3
0.27 onwards uses a snapshot of glib 2 not glib 1, so drop the do_configure_prepend and update the internal/installed options as appropriate. Legacy scripts were removed in 0.26. Use of popt was removed in 0.28. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28python-numpy: don't search host directories for librariesRoss Burton2
The build process hard-codes searches of various directories in /usr when looking for libraries, delete this to avoid host contamination. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28scripts/runqemu-internal: use -cpu core2duo for qemux86-64Stefan Stanacar1
Now that the tune for qemux86-64 changed to core2-64 we need to tell the emulator to use a proper CPU model. With the default setting of qemu64 we'll get things like: root@qemux86-64:~# smart --help traps: python[758] trap invalid opcode ip:7f2af01f6be7 sp:7fff49466ef0 error:0 in strop.so[7f2af01f5000+6000] Illegal instruction If the tune for qemux86 changes, that needs to be updated too. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28oeqa/runtime: rpm: fix finding the test rpm fileStefan Stanacar1
Translate TUNE_PKGARCH to find the right file (this used to work because tune for qemux86-64 used to be x86_64 now it's core2-64) Also, while using packagedata was nice, it's harder to make the test exportable and runnable outside of the build system. (where oe.packagedata isn't available) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28udev: fix typoChen Qi1
Fix the typo in the RDEPENDS statement to make it have real effect. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28packagegroup-core-standalone-sdk-target: Add qemuwrapper-cross to target sysrootDavid Nyström1
Some postinstall scripts use the qemuwrapper script, so to be able to offline install these packages outside of the bitbake environment, this script needs to be exposed also in the SDK. This to enable rootfs generation from a package repository using only a package repository and the toolchain tarball. See https://github.com/nysan/rootfs-sandbox for examples. Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28cml1.bbclass: Fix return code handling in do_menuconfig()Jacob Kroon1
On my system, doing "bitbake -c menuconfig busybox" pops up a gnome-terminal, I can see that the compilation starts but then the terminal automatically exits. It turns out I don't have ncurses development package installed on my host, and OE's host sysroot isn't being passed to gcc, so compilation fails. The window automatically closes before I can read the error message since the '$' in the return code check needs to be escaped. Make sure the user can read the error message by properly checking the return code. Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28wpa-supplicant: Add dependency on opensslMikhail Durnev1
Building of wpa-supplicant failed due to missing dependency on openssl: crypto_openssl.c:10:30: fatal error: openssl/opensslv.h: No such file or directory Signed-off-by: Mikhail Durnev <Mikhail_Durnev@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28multilib.bbclass: fix Multilib QA IssueMing Liu1
Multilib QA warning was observed, as follows: ------ WARNING: Multilib QA Issue: lib32-oprofile package lib32-oprofile - suspicious values 'kernel-vmlinux' in RRECOMMENDS ------ The package starting with 'kernel-vmlinux' should be ok with multilib QA checking. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28buildhistory.bbclass: Improve robustness in image file listingOtavio Salvador1
The filenames sometimes may have strange names. With the 'awk' script it handled a limited number of spaces in the filename and a package installing a file named "test file with spaces" would have its name truncated. This patch uses the find's printf formating to simplify the code and properly handle this case. From a testing image, the only diff produced is: ,----[ files-in-image.txt diff ] | --rwxr-xr-x root root 0 ./usr/bin/test\ file\ with\ | +-rwxr-xr-x root root 0 ./usr/bin/test file with spaces `---- The options used are available since findutils 4.2.5, released in 19 Nov 2004, making it available in all supported host distributions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28lib/oeqa: sshcontrol: Allow alternate port for SSHControlSipke Vriend1
Add an optional parameter to SSHControl so the user can specify and alternate port to the default (22). Signed-off-by: Sipke Vriend <sipke.vriend@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28combo-layer: Make directories only if they don't exisit yetSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28lz4: actually install thingsKoen Kooi1
This failure was masked by having lz4 installed on the host system :( Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28rpcbind: fixes crash during startCristian Iorga2
This fix integrates a patch released after rpcbind 0.2.1 distribution. 0001-rpcbind-rpcuser-not-being-set-in-Makefile.am.patch fixes the issue of rpcuser not being set in Makefile.am, which causes rpcbind to immediately exit. Fixes [YOCTO #5733]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28tiff: flesh out PACKAGECONFIGChristopher Larson1
Adds packageconfigs for all appropriate configure arguments (other than jpeg 8/12 bit mode support, where I wasn't clear on the deps, and which I doubt we care about). jpeg, zlib, and xz dependencies can now be controlled. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28oe-selftest: New tests for sstate relocationCorneliu Stoicescu1
Added new tests: - sstate relocation stress testing - rebuild from sstate stress testing Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28scons bbclass: enable parallel makeKoen Kooi1
Scons supports -jX parallel make, so let's use that. A small scale test of a few recipes shows no failures! Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28runqemu, runqemu-internal: Allow slirp for NFS and KVM useJason Wessel2
The default slirp address for the NFS server is 10.0.2.2. If not using a tap interface this address must be used or the target system cannot connect properly. Also the ip=... kernel arguments need to be set to dhcp when using slirp or the root NFS will not get setup properly. The call to cleanup() results in a routine which is not defined when setting up the NFS because it is called before acquire() for the locking of the tap interfaces, the solution being to simply not call cleanup() that early. When using slirp, kvm should not execute the vhost net checks because the vhost net will not be configure or used. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28runqemu-export-rootfs: update for unfs3Jason Wessel1
The unfs3 no longer has an rpc.mountd component. There is just a single server for mountd and nfsd requests. This means changing the name of the server in the scripts that check for it. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28unfs-server: Remove unfs-server recipe and patchesJason Wessel24
The unfs-server only supports NFS v2 and it is not useful any longer with the advent of 64 bit inodes and the fact that the server has only a 32 bit key for the NFS hash which is hardcoded back to the inode. This recipe is replaced with a user mode NFS server using v3. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28runqemu: Use the newer unfs3 for serving user space nfsSaul Wold2
This new version correctly handles the 64bit ext3 / ext4 issues we were seeing with the older unfs-server which did not handle 64bit file systems correctly, producing the duplicate cookies. [YOCTO #5639] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28unfs3, unfs-server: Replace all instances of unfs-server with unfs3Jason Wessel7
Other recipes dependencies and even some comments need to be updated for the removal of unfs-server and the replacement with unfs3. The unfs3 is a complete drop in replacement providing all the prior functionality of NFSv2 but also adding NFSv3. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28unfs3: Add a NFSv3 user mode server for use with runqemuJason Wessel10
The user mode nfs server allows the use of runqemu without any root privileges and may even be accelerated with kvm. Example: runqemu-extract-sdk tmp-eglibc/deploy/images/qemux86-64/core-image-minimal-qemux86-64.tar.bz2 rootfs runqemu qemux86-64 `pwd`/rootfs nographic slirp kvm [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28dpkg: use systemd service for first boot configurationChen Qi3
Use a systemd service file for first boot configuration for dpkg based images which has 'package-management' in its IMAGE_FEATURES. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28image.bbclass: fix paths to run-postinstsRoss Burton1
The run-postinsts script has been moved to ${sbindir}. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28systemd-compat-units: remove run-postints serviceRoss Burton2
Remove this service as it's moved to the run-postinsts recipe. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28run-postinsts: Add systemd service fileRoss Burton3
This patch mainly adds a systmd service file for run-postinsts, which is started at first boot to run the post-install scripts. Apart from this, this patch also modifies the installation location of run-postinsts to ${sbindir}. This is because this script would be used by both sysvinit and systemd based images. So it's more reasonable to make it locate under ${sbindir}. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28run-postinsts: remove the init script after a clean start-upChen Qi1
If we enable ipk/deb package back-end, and we have 'package-management' in our IMAGE_FEATURES, then the /etc/rcS.d/S99run-postinsts would still exist in our system after a clean start-up. The initial design for run-postinsts requires the related init script to be removed if there's no more post-install script left in the system. This patch fixes this problem. [YOCTO #5718] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28sanity.bbclass: check required perl modulesRobert Yang1
Several required perl modules may missing on the host, for example the Text::ParseWords, Thread::Queue and Data::Dumper are not installed by default on recent Fedora releases (19 and 20 AFAIK). There would be wild errors if they don't exist, so check them in sanity.bbclass. And add perl to SANITY_REQUIRED_UTILITIES. [YOCTO #5744] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28linux-firmware: split out ATI/AMD Radeon firmwareKoen Kooi1
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28feature-arm-thumb: Fix missing t2 suffix for armv7a MACHINEsMartin Jansa1
* unfortunatelly that note about armv7 matching also armv7a is no longer valid since armv7 include in armv7 was replaced with armv6+neon in this commit: commit 75b8adbc042e0f65fb1286bc550d02becd3b6aea Author: Khem Raj <raj.khem@gmail.com> Date: Tue Mar 27 18:37:45 2012 -0700 tune/armv7: Delete since then thumb and arm feeds had the same architecture * be aware that this will rename lots of feeds Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-01 07:21:37 +0000