summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2016-10-03classes/native: set lt_cv_sys_lib_dlsearch_path_specRoss Burton1
This variable is used by libtool to know what paths are on the default loader search path. As we have modified loader paths, native.bbclass can tell libtool that both the sysroot libdir and the host library paths are searched, so no RPATHs for those will be generated. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-03classes/cross: set lt_cv_sys_lib_dlsearch_path_specRoss Burton1
This variable is used by libtool to know what paths are on the default loader search path. As we have modified loader paths, cross.bbclass can tell libtool that both the sysroot libdir and the host library paths are searched, so no RPATHs for those will be generated. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-01machine-sdk: Clear ABIEXTENSION to avoid sstate checksum mismatch issuesRichard Purdie3
When switching MACHINE, nativeksdk recipes could end up being rebuilt. Clear ABIEXTENSION to avoid this problem and ensure sstate checksum consistency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-01oeqa/sstatetests: Add test for multilib allarch checksumsRichard Purdie1
Switching between multilib configurations should not change allarch recipe or nativesdk checksums. Add a new sstate test for this based on the standard allarch test. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30boost: Ensure native recipes have consistent checksumsRichard Purdie1
When building boost-native on i686, the x86 override isn't applied unless the target also happens to be x86. Similarly the x86_64 override is only applied on 64 bit target machines. Avoid various problems by removing the new problematic configure options in the native case. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30gcc-cross: Stop target recipes depending on SDK_SYSRichard Purdie1
gcc-cross target recipes should not depend on SDK_SYS but started to after recent changes. Remove the dependency to stop this (its caused by shared code in do_install). The compiler names contain SDK_SYS so changes would be correctly handled via other means. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30multilib.conf: Ensure sstate checksums don't change when using this includeRichard Purdie1
When enabling multilib.conf, the world was rebuilding due to changes in the pkg-config search path. This doesn't matter so exclude it from the checksums. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30allarch: Fixes to stop rebuilds when change multilibsRichard Purdie1
When changing multilibs, allarch recipes should not be rebuilding. This adds enough variable exclusions to make this work properly. Future regressions will be prevented with new testing. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30nativesdk: Don't enable MULTILIBSRichard Purdie1
package_write_rpm references the MULTILIBS variable and the checksums of nativesdk recipes were changing as a result of this. We don't need/want MULTILIBS values for nativesdk so disable this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30oeqa/utils: Add StreamHandler to loggerFrancisco Pedraza1
StreamHandler was added due missing log information on the console in oe-selftest with Qemu Runner Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30subprocess: remove Popen in favor of check_outputStephano Cetola2
This begins moving away from the deprecated subprocess calls in an effort to eventually move to some more global abstraction using the run convenience method provided in python 3.5. [ YOCTO #9342 ] Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30kbd: create ptest sub-packageKai Kang3
Create kbd-ptest sub-package: * add file run-ptest and runtime dependency make * modify installed Makefile to disable remake Makefile and the test cases when run the ptest * add patch to set proper path for test cases to get resource files Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30mkefidisk.wks: use partition UUID and GPT partition tableEd Bartosh1
This is a preparation to use mkefidisk as a default wks for genericx86* BSPs. This change enables usage of partition UUID instead of device name to specify root partition in kernel command line. It should make images to boot on devices with boot device names that differ from what's mentioned in wks file. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30scripts: add new script 'native'Ed Bartosh1
Added 'native' convenience shell script to run native tools. Example of usage: > bitbake bmap-tools-native > native bmaptool --version Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30grub-efi.bbclass: Add a space between root and append parameterRaymond Tan1
Add a space between the root and append parameter, similar to syslinux.bbclass, in creating the final grub.cfg. Without this, the final kernel boot parameters will concatenate into strings like root=/dev/ram0console=ttyS0... Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30build-perf-test-wrapper.sh: accept test case failuresMarkus Lehtonen1
Utilize the new return value (2) from oe-build-perf-test. Do not exit with an error in case some individual tests fail. Even if some tests fail we still want to complete successfully, that is, display and archive the results and do cleanup. The individual tests do not depend on each other anymore so test failures shouldn't affect the results of successful tests. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30oe-build-perf-test: return 2 if some tests failedMarkus Lehtonen1
Add a new return value '2' that indicates that some tests failed but there were no fatal errors (i.e. configuration mistakes or bugs in the tests themselves). Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30multilib_header: avoid sstate checksum issues for -nativesdk recipesJoshua Lock1
Much as with -native recipes, as addressed in commit b15730caf0d4c40271796887505507f2501958bb, arch specific variables like MIPSPKGSFX_ABI were affecting -nativesdk sstate checksums for recipes like nativesdk-glibc-initial. Disable multilib_header for nativesdk as we don't use multilibs in this scenario. [YOCTO #10320] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30build-perf-test-wrapper.sh: show defaults for '-a' and '-w'Markus Lehtonen1
Display default values for '-a' and '-w' command line arguments in the usage help text. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30build-perf-test-wrapper.sh: check for positional argumentsMarkus Lehtonen1
Stricter checking of command line arguments. The script doesn't use any positional arguments so don't accept any and error out if those are found. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30runqemu: Add little endian variations for MIPSZubair Lutfullah Kakakhel1
Add mipsel and mips64el as an option. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: implement --multi optionMarkus Lehtonen1
Makes it possible to average over multiple buildstats. If --multi is specified (and the given path is a directory) the script will read all buildstats from the given directory and use averaged values calculated from them. All of the buildstats must be from a "similar" build, meaning that no differences in package versions or tasks are allowed. Otherwise, the script will exit with an error. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: make logger msg format a bit more readableMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: use exception for internal error handlingMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: add walltime to --diff-attrMarkus Lehtonen1
For comparing the elapsed wall clock time of tests. Default values for --min-val and --min-absdiff are 5 seconds and 2 seconds. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: add read_ops and write_ops to --diff-attrMarkus Lehtonen1
Two new options, making it possible to compare the number of filesystem operations of tasks. Defaults for --min-val and --min-absdiff are set to more or less arbitrary 500 and 50 operations, respectively. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: add read_bytes and write_bytes to --diff-attrMarkus Lehtonen1
These are I/O counter values from /proc/<pid>/io and represent the number of bytes read from / written to the storage layer. Default values for --min-val and --min-absdiff limits are set to 512kB and 128kB, respectively. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: introduce --diff-attrMarkus Lehtonen1
A new command line option for choosing which "attribute" of the buildstats to compare. At first, the already supported 'cputime' is the only available option. But, refactoring done in this patch should make it easy to add new attribute types. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: do not hardcode field widths in outputMarkus Lehtonen1
Dynamically adjust the width of all fields in task diff output. Makes it easier to print other units than cputime, too. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: implement BSTask classMarkus Lehtonen1
New class representing buildstats data of a single task. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: rename --min-time and --min-timediff argsMarkus Lehtonen1
Rename these arguments to --min-val and --min-absdiff in preparation for supporting other "quantities" than just cputime. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30scripts/buildstats-diff: check that the given directory existsMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30mips64-linux: set ac_cv_sizeof_ssize_t for mips64elZubair Lutfullah Kakakhel1
The fix for [YOCTO #5935] was applied for mips64 but not for mips64el Patch it for mips64el For description of issue, check OE-Core 7a5b6b96 Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30image-buildinfo: restore trailing newlineAndré Draszik1
The last line in the generated /etc/build doesn't end with a newline anymore, restore it. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30linux-yocto.inc: Run kernel_version_sanity_check with final sourceNathan Rossi1
Ensure that the kernel_version_sanity_check task runs after all source modifications are complete, including any that are introduced during the kernel_metadata task. This also avoids any race condition issues when kernel_version_sanity_check and kernel_metadata tasks are running at the same time. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30tzdata: update to 2016gArmin Kuster1
LICENSE md5sum changed do to rewording some text not released to the license. see https://github.com/eggert/tz/commit/8c143a2b65fdfd43a7911be6fdb700c9c4553f58 Changes to future time stamps Turkey switched from EET/EEST (+02/+03) to permanent +03, effective 2016-09-07. (Thanks to Burak AYDIN.) Use "+03" rather than an invented abbreviation for the new time. New leap second 2016-12-31 23:59:60 UTC as per IERS Bulletin C 52. (Thanks to Tim Parenti.) Changes to past time stamps For America/Los_Angeles, spring-forward transition times have been corrected from 02:00 to 02:01 in 1948, and from 02:00 to 01:00 in 1950-1966. For zones using Soviet time on 1919-07-01, transitions to UT-based time were at 00:00 UT, not at 02:00 local time. The affected zones are Europe/Kirov, Europe/Moscow, Europe/Samara, and Europe/Ulyanovsk. (Thanks to Alexander Belopolsky.) Changes to past and future time zone abbreviations The Factory zone now uses the time zone abbreviation -00 instead of a long English-language string, as -00 is now the normal way to represent an undefined time zone. Several zones in Antarctica and the former Soviet Union, along with zones intended for ships at sea that cannot use POSIX TZ strings, now use numeric time zone abbreviations instead of invented or obsolete alphanumeric abbreviations. The affected zones are Antarctica/Casey, Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/Mawson, Antarctica/Rothera, Antarctica/Syowa, Antarctica/Troll, Antarctica/Vostok, Asia/Anadyr, Asia/Ashgabat, Asia/Baku, Asia/Bishkek, Asia/Chita, Asia/Dushanbe, Asia/Irkutsk, Asia/Kamchatka, Asia/Khandyga, Asia/Krasnoyarsk, Asia/Magadan, Asia/Omsk, Asia/Sakhalin, Asia/Samarkand, Asia/Srednekolymsk, Asia/Tashkent, Asia/Tbilisi, Asia/Ust-Nera, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg, Asia/Yerevan, Etc/GMT-14, Etc/GMT-13, Etc/GMT-12, Etc/GMT-11, Etc/GMT-10, Etc/GMT-9, Etc/GMT-8, Etc/GMT-7, Etc/GMT-6, Etc/GMT-5, Etc/GMT-4, Etc/GMT-3, Etc/GMT-2, Etc/GMT-1, Etc/GMT+1, Etc/GMT+2, Etc/GMT+3, Etc/GMT+4, Etc/GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8, Etc/GMT+9, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Europe/Kaliningrad, Europe/Minsk, Europe/Samara, Europe/Volgograd, and Indian/Kerguelen. For Europe/Moscow the invented abbreviation MSM was replaced by +05, whereas MSK and MSD were kept as they are not our invention and are widely used. Changes to zone names Rename Asia/Rangoon to Asia/Yangon, with a backward compatibility link. (Thanks to David Massoud.) Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30tzcode-native: Update to 2016gArmin Kuster1
LICENSE file checksum changed do to a verbage change. Changes to code zic no longer generates binary files containing POSIX TZ-like strings that disagree with the local time type after the last explicit transition in the data. This fixes a bug with Africa/Casablanca and Africa/El_Aaiun in some year-2037 time stamps on the reference platform. (Thanks to Alexander Belopolsky for reporting the bug and suggesting a way forward.) If the installed localtime and/or posixrules files are symbolic links, zic now keeps them symbolic links when updating them, for compatibility with platforms like OpenSUSE where other programs configure these files as symlinks. zic now avoids hard linking to symbolic links, avoids some unnecessary mkdir and stat system calls, and uses shorter file names internally. zdump has a new -i option to generate transitions in a more-compact but still human-readable format. This option is experimental, and the output format may change in future versions. (Thanks to Jon Skeet for suggesting that an option was needed, and thanks to Tim Parenti and Chris Rovick for further comments.) Changes to build procedure An experimental distribution format is available, in addition to the traditional format which will continue to be distributed. The new format is a tarball tzdb-VERSION.tar.lz with signature file tzdb-VERSION.tar.lz.asc. It unpacks to a top-level directory tzdb-VERSION containing the code and data of the traditional two-tarball format, along with extra data that may be useful. (Thanks to Antonio Diaz Diaz, Oscar van Vlijmen, and many others for comments about the experimental format.) The release version number is now more accurate in the usual case where releases are built from a Git repository. For example, if 23 commits and some working-file changes have been made since release 2016g, the version number is now something like '2016g-23-g50556e3-dirty' instead of the misleading '2016g'. Official releases uses the same version number format as before, e.g., '2016g'. To support the more-accurate version number, its specification has moved from a line in the Makefile to a new source file 'version'. The experimental distribution contains a file to2050.tzs that contains what should be the output of 'zdump -i -c 2050' on primary zones. If this file is available, 'make check' now checks that zdump generates this output. 'make check_web' now works on Fedora-like distributions. Changes to documentation and commentary tzfile.5 now documents the new restriction on POSIX TZ-like strings that is now implemented by zic. Comments now cite URLs for some 1917-1921 Russian DST decrees. (Thanks to Alexander Belopolsky.) tz-link.htm mentions JuliaTime (thanks to Curtis Vogt) and Time4J (thanks to Meno Hochschild) and ThreeTen-Extra, and its description of Java 8 has been brought up to date (thanks to Stephen Colebourne). Its description of local time on Mars has been updated to match current practice, and URLs have been updated and some obsolete ones removed. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30pseudo: quiet diagnostics during startup for pseudo -dRobert Yang3
When the client spawns a pseudo server, it starts out sending diagnostics to stderr. This can be spammy in some cases with races during startup; everything resolves, but we get scary-looking diagnostics. So shove those into a log file. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-09-30libxml-parser-perl: remove redundant expat-native dependencyRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30wic: rename and amend systemd-boot wks fileJianxun Zhang1
Rename wks for systemd-boot per the suggestion from community. Also amend description to distinguish it from others when running "wic list images". Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30bootchart2: Allocate space on heap for collector chunksKyle Russell2
Nicer for embedded devices which may have smaller stack limitations. Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30db: Refresh patchesRichard Purdie4
The patches were failing to apply in some cases, refresh them aganst the current source. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29db: Upgrade to 6.0.35Aníbal Limón1
The SRC_URI was changed to point gentoo distfiles because now Oracle request authorization for download the source code [1], there are no changes in the LICENSE since version 6.0.20 when the LICENSE changes to AGPL-3 [2], also the md5sum was review to be sure that is the same. This minor upgrade fix an issue related to multiple rpm instances querying the database [3]. The bugfixes related are, - Fixed a bug that may lead to a crash when opening multiple environments in a multi-threaded program. - Fixed a bug where closing a panic environment raised access violation and crashed the program. For see the complete list of changes mostly bugfixes between 6.0.30 and 6.0.35 [4]. [1] http://download.oracle.com/otn/berkeley-db/db-6.0.35.tar.gz [2] http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_6_0.html#idp509784 [3] https://bugzilla.yoctoproject.org/show_bug.cgi?id=10157#c0 [4] http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_6_0.html#idp503384 [YOCTO #10157] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29cross-canadian/libgcc-common: Fixes for arm multilibRichard Purdie2
Arm is unusual in that we force it to "linux-gnueabi" and "linux" doesn't build. This was causing problems for multilib configurations which were assuming "linux" was the default compiler rather than linux-gnueabi. This change does two things, ensures symlinks are generated for linux-gnueabi and also adapts the libgcc code to account for the difference on arm. It still needs to immediately expand/save TARGET_VENDOR but we defer deciding what TARGET_OS should be until we know TARGET_ARCH (which the multilib code may change). [YOCTO #8642] Note that sanity tests of a 32 bit arm multilib still break due to issues with the kernel headers on a mixed bit system. This looks to be a general headers issue for the platform though and a different type of bug. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29parselogs: Update uvesafb errors in qemu whitelistJianxun Zhang1
This change only whitelists the timeout message in infinite wait case in uvesafb driver. With the latest timeout patch introducing infinite wait in uvesafb driver, we whitelist the timeout message since it works as a warning for issues related to timeout not to be fixed in build servers. We remove other errors for bug-discovering purposes in some cases where these lines are still worthy to be caught (not whitelisted): The removed errors show up again in the infinite wait case. It indicates a different root cause or the timeout patch doesn't work correctly. Timeout happens when developers explicitly set a non-negative timeout of a limited period to wait for task completion in uvesafb driver. Timeout or/and errors occur when kernel doesn't have the latest timeout patch in driver. Note: The latest timeout patch is tracked by: a2966330bcd29e99c0403235edb29433b0c53d56 [YOCTO #8245] Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28runqemu: explicitly set image formatEd Bartosh1
QEMU produces a warning if drive format is not specified: WARNING: Image format was not specified for 'tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.wic' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. Set image format to 'vmdk', 'qcow2' or 'vdi' for correspondent image types. Set it to 'raw' for the rest of image types. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28qemuboot: don't fail when QB_DEFAULT_KERNEL isn't symlinkMartin Jansa1
* in some cases we might set QB_DEFAULT_KERNEL to the real filename instead of symlink and then this whole readlink work around actually breaks the build, because os.readlink fails on normal files: >>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86-master-20160927084848.bin') 'bzImage-linux-yocto-qemux86.bin' >>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin') Traceback (most recent call last): File "<stdin>", line 1, in <module> OSError: [Errno 22] Invalid argument: '/jenkins/mjansa/build-starfish-master-mcf/BUILD/deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin' Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28cve-check-tool: report progress when downloading CVE databaseAndré Draszik2
We add a patch to report the progress, and at the same time inform bitbake that progress can be extracted via the simple 'percent' progress handler. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28cve-check-tool: convert do_populate_cve_db() from python to shAndré Draszik1
This will allow us to easily incorporate progress support via bb.process.run() Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28oeqa/sstatetests: Ensure we cover deb packaging backend for sstate testRichard Purdie1
Currently we weren't testing the deb backaned for sstate correctness and there was a bug that had crept in. Ensure we cover all package backends with the test regardless of what the distro/conf sets. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 21:32:50 +0000