summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2016-09-03oe-selftest: devtool: fix test after recent changePaul Eggleton1
OE-Core commit d3057cba0b01484712fcee3c52373c143608a436 fixed handling of wildcard bbappends, which means that this test's expectations about the bbappend file name are no longer met. devtool finish is meant to use wildcard bbappends so fix the test accordingly. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03glibc-scripts: add RDEPENDS on libsotruss package required by sotruss scriptJagadeesh Krishnanjanappa1
It solves below error observed on qemux86 target: root@qemux86:~# sotruss ./hello ERROR: ld.so: object '/usr/$LIB/audit/sotruss-lib.so' cannot be loaded as audit interface: cannot open shared object file; ignored. Hello World root@qemux86:~# With this change, we get: root@qemux86:~# sotruss ./hello hello -> libc.so.6 :*__libc_start_main(0x8048300, 0x1, 0xbfc86274) hello -> libc.so.6 :*puts(0x804851c, 0xb74af000, 0x0) Hello World root@qemux86:~# Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03webkitgtk: fix racy double build of WebKit2-4.0.girAlexander Kanavin2
This occasionally triggered autobuilder errors where the .gir file appeared truncated to introspection tools. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03webkitgtk: upgrade to 2.12.4Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03asciidoc: fix upstream version checkAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.selftest.liboe: add test for xattr in copytreeJoshua Lock1
Add a test to ensure that oe.path.copytree() preserves extended attributes on files. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oe.path: preserve xattr in copytree() and copyhardlinktree()Joshua Lock1
Pass appropriate options to tar invocations in copytree() and copyhardlinktree() to ensure that any extended attributes on the files are preserved during the copy. We have to drop the use cpio in "Copy-pass" mode in copyhardlinktree() because cpio doesn't support extended attributes on files. Instead we revert back to using cp with different patterns depending on whether or not the directory contains dot files. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.selftest: add a test for oe.path.copytree()Joshua Lock1
One motivation for the use of cpio in oe.path.copytree() was to ensure that files with spaces in their names were copied. Add a new unittest module to test the OE module with a test case for copytree with a spaces in a filename. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03ltp: remove useless script STPfailure_report.plMingli Yu1
* Remove useless script STPfailure_report.pl to avoid confusing about this script fails to run as it lacks dependency on some perl module such as LWP::Simple - The script STPfailure_report.pl previously is added as a tool to analyze failures from LTP runs on the OSDL's Scaleable Test Platform (STP) as below: commit f0573facbbbf14798cc5b7d4653a5e46b4b95fa5 Author: robbiew <robbiew> Date: Wed Apr 28 19:21:39 2004 +0000 Added tool for analyzing failures from LTP runs on the OSDL's Scaleable Test Platform (STP) - And the script STPfailure_report.pl mainly accesses http://khack.osdl.org to retrieve ltp test results run on OSDL's Scaleable Test Platform (STP) and prints the reports, and now the website http://khack.osdl.org not accessible, so the script is useless and drop it and not ship it on target system Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: include commands log file name in results.jsonMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: include buildstats file name in results.jsonMarkus Lehtonen2
No need to do lsdir magic for finding buildstats when reading results. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: show skipped tests in results, tooMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: convert buildstats into json formatMarkus Lehtonen1
Instead of archiving buildstats in raw text file format convert all buildstats into one json-formatted file. Some redundant information, i.e. 'Event:', 'utime:', 'stime:', 'cutime:' and 'cstime:' fields, are dropped. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: measure io statMarkus Lehtonen1
Add data from /proc/<pid>/io to system resource measurements. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: don't use Gnu timeMarkus Lehtonen1
Use Python standard library functionality instead of the time utility for measuring elapsed (wall clock) time of commands. The time.* log files are also ditched. However, the same detailed resource usage data, previously found in time.* logs is now provided in results.json file. This data is collected through the resource module of Python. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: rename buildstats directoriesMarkus Lehtonen1
Change directory name from 'buildstats-<test_name>' to just 'buildstats'. However, this patch adds the possibility to label buildstats directory name with a postfix which makes it possible to save multiple buildstats per test, for example. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: separate output dir for each testMarkus Lehtonen1
Store the output data of each test in an individual subdirectory instead of storing everything in the root output directory. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: strip date from buildstats directory pathMarkus Lehtonen1
Archive buildstats in a directory like 'buildstats' instead of something like 'buildstats/20160513120000'. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oe-build-perf-test: rename log file and implement --log-fileMarkus Lehtonen1
Rename the (main) log file of the oe-build-perf-test script from 'output.log' to 'oe-build-perf-test.log'. Also, add a new command line option --log-file which makes it possible to use an alternative log file name/path, if needed. Note that the file name/path is relative to the output directory. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: enable json-formatted resultsMarkus Lehtonen1
Automatically create a json.formatted file (results.json) in the results directory that contains results from all tests. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: add 'product' to test result dataMarkus Lehtonen1
This defaults to 'oe-core' but can be defined using the OE_BUILDPERF_PRODUCT environment variable. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oe-build-perf-test: update globalres and git even if tests failedMarkus Lehtonen1
Write globalres log file and commit results to Git even if some tests failed. Now that tests do not depend on each other there should be no risk of bogus results caused by test failures. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: treat failed measurements as errorsMarkus Lehtonen1
Now failed measurements correctly cause a test failure (recorded as an error). There should be no need to continue the test if one step fails, especially now that the tests don't depend on each other. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: make tests independentMarkus Lehtonen2
Add test set-up functionality so that the individual tests do not depend on each other. This should make sure that a failure in one test does not affect the results of another test. The patch also makes it reasonable to run only a subset of the tests by using the --run-tests option. The increase in total execution time of the full suite - caused by the additional set-up steps - is insignificant because normally no additional tasks need to be run. The previous test has already done all set-up work. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa.buildperf: fix checking of invalid resultsMarkus Lehtonen1
The test status check done when writing globalres log was incorrect. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03x264: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03systemtap: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03linux-libc-headers: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lsof: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03musl: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03ifupdown: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03kernel.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03distutils-common-base.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03autotools.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser1
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lttng-modules: Update 2.7.3 -> 2.8.0+masterRichard Purdie1
We need master for the changes to work with 4.8 kernels. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lttng-tools: Add PACKAGECONFIG for manpagesRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lttng-tools: Update 2.7.1 -> 2.8.1Richard Purdie2
Drop backported patch. Update ust configure option. Update location of xml m4 file. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lttng-ust: Update 2.7.1 -> 2.8.1Richard Purdie3
Drop aarch64_be patch which is now upstream. Update doc patch to apply to latest version. Disable man generation in configure options to match docs patch (for now). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libyaml: update to 0.1.7Alexander Kanavin2
Drop backported libyaml-CVE-2014-9130.patch Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03ffmpeg: update to 3.1.3Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03iso-codes: update to 3.70Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03gstreamer1.0: upgrade to 1.8.3Maxin B. John10
1.8.2 -> 1.8.3 Remove backported patch from 1.8.3: 0007-glplugin-gleffects-fix-little-rectangel-appears-at-t.patch Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03sqlite3: upgrade to 3.14.1Maxin B. John1
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03base, autotools: Append PACKAGECONFIG_CONFARGS to EXTRA_OECONF only in ↵Martin Jansa2
autotools.bbclass * recipes which don't inherit autotools or cmake bbclass and want to use the configure options from PACKAGECONFIG need to handle PACKAGECONFIG_CONFARGS themselves. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03unzip: fixes strange outputEdwin Plauchu1
This fixes commit 763a3d424bccf559a8d6add3dc1f2746c82f2933 Output was strange when using unzip to extract zip file. This patch fixed so. [YOCTO #9551] Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03nss: update to 3.25Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03mpg123: update to 1.23.6Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lighttpd: update to 1.4.41Alexander Kanavin3
Rebase pkgconfig.patch Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03gobject-introspection: odd versions are development snapshotsAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03ffmpeg: update to 3.1.2Alexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 18:24:24 +0000