summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2015-01-23net-tools: Fix rerunning of do_patch taskRichard Purdie1
Rerunning the do_patch task currently fails. The code is nearly correct but needs to remove the quilt ".pc" directory and move the secondary one into place in order to rerun, not move it into the .pc directory as the code currently does. [YOCTO #7128] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-23kernel/image/depmodwrapper: Fixups for depmodRichard Purdie6
With the rpm package backend enabled, running: bitbake <image> bitbake virtual/kernel -c clean bitbake <image> -c rootfs -f results in an image with incorrect kernel module dependency information. The problem is that the System.map and kernel-abiversion files are needed for depmod and after the recent kernel changes, these are no longer in sstate. Its reasonable to require the kernel to unpack/build if you're about to build a module against it. It is not reasonable to require this just to build a rootfs. Therefore stash the needed files specifically for depmod. Also fix some STAGING_KERNEL_DIR references which were incorrect, found whilst sorting through his change. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-23gcc-runtime: Remove libgfortran data from receipeDaniel Dragomir1
Remove libgfortran packages from PACKAGES list as long as libgfortran has separate receipe since commit 5bde5d9b39ea67f19a1a6aedd0c08c6cfedcbe5f gcc: Allow fortran to build successfully in 4.8 Otherwise, when fortran support will be enabled in the compiler, both lingfortran and gcc-runtime receipes will create the same files and will try to install them. This will cause errors: ERROR: The recipe libgfortran is trying to install files into a shared area when those files already exist. Those files and their manifest location are: ... Please verify which recipe should provide the above files. Signed-off-by: Daniel Dragomir <daniel.dragomir@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23package.bbclass: Let PR server update PKGV, not PVMike Looijmans1
PV is the package version as we need it to be during the build. PKGV is the final version as it ends up in the package, and defaults to PV. The packager handled builds without PR-server by replacing the AUTOINC string in PKGV, but when the PR-server is being used, the script replaces the contents of PKGV with the PV if the PV contains "AUTOINC". Thus the packager overrides any change to PKGV the recipe might have made. This breaks classes like gitpkgv that provide a correctly numbered PKGV, the number as calculated by that class will simply be replaced with a 0-based index from the PR-server. This patch makes the packager look at the PKGV version instead of the PV, and update the PKGV only based on the PKGV contents as set by the recipe. See also the discussion here: http://lists.openembedded.org/pipermail/openembedded-core/2015-January/100329.html From investigating the history of the code and changes in the past year, the use of "pv" instead of "pkgv" appears to be just an oversight, introduced in: commit b27b438221e16ac3df6ac66d761b77e3bd43db67 "prs: use the PRServer to replace the BB_URI_LOCALCOUNT functionality" A later commit 865d001de168915a5796e5c760f96bdd04cebd61 "package/prserv: Merge two similar functions into one" silently fixed this only for the case without PR-server by using pkgv there. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23lib/oe/package: Ensure strip breaks hardlinksRichard Purdie1
Normally, strip preserves hardlinks which in the case of the way our hardlink rather than copy functionality works, is a disadvantage and leads to non-deterministic builds. This adds a move into place after the strip operation to ensure hardlinks are broken and we bring back build determinism. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23python-2.7-manifest: Add package for contextlib modulePhilip Tricca2
This is required for python code using 'with' statements. Signed-off-by: Philip Tricca <flihp@twobit.us>
2015-01-23dhcp: not override site.hHongxu Jia3
Previously, site.h was overridden for setting _PATH_DHCPD_CONF and _PATH_DHCLIENT_CONF, it caused other MACROs were missing, so we use a patch to instead. The macros NSUPDATE and COMPACT_LEASES existed in site.h Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23dhcp: upgrade to 4.3.1Hongxu Jia2
Rebase fixsepbuild.patch to 4.3.1 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23rpcbind: add PACKAGECONFIG for systemdHongxu Jia1
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23rpcbind: upgrade to 0.2.2Hongxu Jia2
Drop 0001-rpcbind-rpcuser-not-being-set-in-Makefile.am.patch which has been merged to 0.2.2 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23man-pages: upgrade to 3.76Hongxu Jia1
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23gnupg: upgrade to 2.1.1Hongxu Jia1
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23xmlto: upgrade to 0.0.25Hongxu Jia3
Drop obsolete_automake_macros.patch, it has been merged to 0.0.25 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23elfutils: upgrade to 1.161Hongxu Jia14
Drop PREFERRED_VERSION_elfutils in meta/conf/distro/include/ tcmode-default.inc, it builds the latest version by default. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23packagegroup-self-hosted: package all of PythonPaul Gortmaker1
Based on commit 745dfbc869fd593d1b92e2bc9c01d589ab21ade3 "buildtools-tarball: package all of Python", we do the same here for packagegroup-self-hosted. The switch to the fetcher where it added BeautifulSoup revealed a shortcoming in the python packaged for the self hosting (missing htmlentitydefs). Here we fix it in the same way as what was done for buildtools-tarball and include python-modules vs. all the individual little chunks. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23fix '[[: not found' error message using dashVincent Génieux1
Remove bash specific syntax '[[ test ]]' replaced with '[ test ]'. Fixes [YOCTO #7112] Signed-off-by: Vincent Génieux <vincent2014@startigen.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23packagegroup-core-sdk: add gcc-sanitizers to core SDKDan McGregor1
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
2015-01-23gcc-sanitizers: Enable GCC sanitizersDan McGregor5
AddressSanitizer is a fast memory error detector. ThreadSanitizer detects data races. UBSanitizer detectes undefined behaviour. All consist of compiler instrumentation and a run-time library. The compiler instrumentation was already enabled, this builds the run-time library component. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
2015-01-23oeqa/utils/decorators: Try and improve ugly _ErrorHandler tracebacksRichard Purdie1
Currently, if one module is skipped, any other module calling skipModule causes tracebacks about _ErrorHandler not having a _testMethodName method. This reworks the code in a way to avoid some of the problems by using the id() method of the objects. It also maps to the correct name format rather than "setupModule" or just skiping the item entirely. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23perf: fix for rebuildingRobert Yang1
Fix for rebuilding error: make[3]: *** No rule to make target `/path/to/sysroots/qemuarm64/usr/src/kernel/tools/lib/traceevent//trace-seq.c', needed by `.trace-seq.d'. Stop. make[2]: *** [sub-make] Error 2 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23libav: drop unused FFMPEG_LIBS and move libpostproc only to 0.8.11Martin Jansa3
* standalone libpostproc recipe depends on libav, but current PACKAGES_DYNAMIC indicated that libav-9.13 also provides libpostproc Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2015-01-23xorg-app: add x11 to required DISTRO_FEATURES and cleanup dependenciesMartin Jansa3
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2015-01-23recipetool: add python dependency scanning supportChristopher Larson2
This uses a standalone python script named `pythondeps` which now lives in scripts. It supports scanning for provided packages and imported modules/packages, the latter via the python ast. It's not perfect, and obviously conditional imports and try/except import blocks are handled naively, listing all the imports even if they aren't all used at once, but it gives the user a solid starting point for the recipe. Currently `python_dir` from setup.py isn't being handled in an ideal way. This is easily seen when testing the python-async package. There, the root of the project is the async package, so the root has __init__.py and friends, and the python provides scanning currently just assumes the basedir of that dir is the package name in this case, which is not correct. Forthcoming patches will resolve this. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23recipetool: add python buildsystem supportChristopher Larson1
- Handles distutils & setuptools. - Supports pulling metadata from PKG-INFO, .egg-info, & setup.py (via two different mechanisms). - Doesn't handle python 3 yet. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23perl: Backport fix for bug #123591Gary Thomas2
This patch fixes a crash in perl when using formatted strings @... Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23grub-efi: bump the PRRobert Yang1
Fixed when rebuild: configure: error: source directory already configured; run "make distclean" there first grub doesn't need bump since it always uses autotools (not autotools-brokensep in the past). Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23neard: fix B != SRobert Yang2
And bump PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23neard: fix parallel issueRobert Yang2
There might be no src dir if the src/builtin.h runs earlier, create it to fix the race issue: src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h /bin/sh: src/builtin.h: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23guile: fix installed-vs-shipped errorRobert Yang2
Fixed: guile-2.0.11: guile: Files/directories were installed but not shipped /usr/lib64/libguile-2.0*-gdb.scm [installed-vs-shipped] This is because when there is no file in the directory: for f in libguile-2.0*; do [snip] done The f would be libguile-2.0* itself, use install-exec-hook will fix the problem since it depends on install-libLTLIBRARIES. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23Revert "guile: fixed installed-vs-shipped error"Robert Yang2
This reverts commit 397f27cdceaa4874d8d06aad10cd37a5817d90b8. The fix isn't correct, caused: install: cannot create regular file `/path/to/sysroots/x86_64-linux/usr/lib/libguile-2.0.so.22.7.2': File exists will add a new fix. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23base.bbclass: detect when S has been set incorrectlyPetter Mabäcker1
Currently base.bbclass is creating S if it's not created by unpacking an archive or fetching a repository. If we avoid creating S we can detect when S hasn't been set correctly, since it will not exist. Then we can tell the user that they should set S to a proper value, instead of just failing with odd errors in later tasks. Besides removing the auto-creation of S this change will introduce a warning if S is set incorrectly. The reason for not display an error and return is due to all external layers that might have recipes that will fail otherwise and that might be a bit to hard to start with. So use a warning until people have had a chance to cleanup affected recipes. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23meta: set proper S valuePetter Mabäcker24
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23xorg-minimal-fonts: set and handle S in a proper wayPetter Mabäcker1
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Also do some minor adjustment after changing value of S. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23lsof: handle S in a proper wayPetter Mabäcker1
Since lsof are doing two unpacks and S should be set to match the second unpack of an internal archive, we should let the build system know that we are aware of this. Solve this by temporarily set S like lsof are doing with SRC_URI. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23makedevs: set and handle S in a proper wayPetter Mabäcker1
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Also do some cleanup of code not needed after changing value of S. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23gnutls: fix sed commandRobert Yang2
The "sed 's/.bak//g'" matchs "bitbake", which would cause strange errors when the S contains "bitbake", fix to "sed 's/\.bak$//'`" Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23python3: fix for cross compilingRobert Yang4
Fixed: * python3 has introduced _PYTHON_PROJECT_BASE which is used for separate B and S, but it doesn't work when compile Modules, the target python3 runs python3-native's sysconfig to get srcdir which is the native's, there would be errors when native's srcdir has been removed, add _PYTHON_PROJECT_SRC to fix the problem. * Check cross_compiling when get FLAGS Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23curl: Add PACKAGECONFIG for sambaMaxin B. John1
curl 7.40.0 added support for the SMB/CIFS protocol. So provide a PACKAGECONFIG option for smb. Reported-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23at-spi2-core: pass correct path to dbus-daemonRoss Burton1
at-spi2-core tries to find the dbus-daemon binary and hard-codes this path in a script. The first dbus-daemon it finds is the one in the target sysroot, so explicitly pass the correct path. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23texi2html: update po_document/Makefile.in.in for new gettextRobert Yang2
* The autotools_do_configure updates po/Makefile.in.in, we also need update po_document and po_messages. Fixed: *** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version 0.18 but the autoconf macros are from gettext version 0.19 * Remove fix_gettext_version.patch, it wasn't a correct fix. * Remove unneeded code from do_configure_append/prepend(). Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23texinfo: update po_document/Makefile.in.in for new gettextRobert Yang1
The autotools_do_configure updates po/Makefile.in.in, we also need update po_document. Fixed: *** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version 0.18 but the autoconf macros are from gettext version 0.19 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23gettext: upgrade to 0.19.4Robert Yang11
* gettext: - Update parallel.patch, we only need a part of it. * gettext-minimal-native: - Update related files from gettext-native. - Remove Makevars.template, we didn't use it. - Remove iconv-m4-remove-the-test-to-convert-euc-jp.patch (can be reverse applied). - Update the COPYING (1995 - 2014). * About upgrade gettext-minimal-native (for future's upgrade): - Build gettext-native - Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and gettext-runtime/po/remove-potcdate.sin from gettext-native. - Update COPYING when needed (usually update the year), do not copy the whole COPYING file from gettext-native. - Go to gettext-native's ${S}/gettext-runtime/m4: > Remove lt*.m4 and libtool.m4 > copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/m4/ > tar czvf /path/to/aclocal.tgz *.m4 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23opkg: fix libtoolize errorRobert Yang2
Fixed: libtoolize: error: AC_CONFIG_MACRO_DIRS([m4]) conflicts with ACLOCAL_AMFLAGS=-I shave. They are already included by configure.ac: AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_MACRO_DIR([shave]) Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23libtool: upgraded to 2.4.4Robert Yang17
* Upgrade: - libtool-native - libtool-cross - nativesdk-libtool - libtool * Remove 2 patches: - respect-fstack-protector.patch: already in the new source. - avoid_absolute_paths_for_general_utils.patch: no general.m4sh any more. - Use inline-source to install libtoolize. * Update other patches * The LIC_FILES_CHKSUM is changed because of the indent, the contents are the same. * The libtool config files are put in libtool/build-aux now, it was libtool/config in the past. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23automake: upgrade to 1.15Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23mklibs-native: upgrade to 0.1.40Robert Yang1
Remove the do_configure_prepend, it never worked since the sed command didn't use '-i'. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23autogen-native: upgrade to 5.18.4Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23grub: remove autogen-native dependency for tarball recipesRoss Burton2
The tarballs of grub ship the files that are generated by autogen, so tarball recipes don't need to depend on autogen-native (and thus guile-native). Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23lib/oe/sdk.py: Add SDKIMAGE_INSTALL_COMPLEMENTARY capabilities to DpkgSdkPau Espin Pedrol1
Creating an SDK by means of do_populate_sdk, complementary packages (SDKIMAGE_FEATURES = "dev-pkgs dbg-pkgs") are not installed when using the deb packaging system. The reason is that the call to install the complementary packages is missing from the deb backend. This patch fixes that. [YOCTO #7160] (From OE-Core rev: 0bcca69ea97ac51acf290f8f1da1bde715ab51c4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-21arch-mips.inc: Add the MIPS ABIEXTENSION to toolchain nameMark Hatle1
[YOCTO #7143] When the system is configured for a multilib SDK, such as: require conf/multilib.conf MULTILIBS = "multilib:lib32 multilib:lib64" DEFAULTTUNE = "mips32r2" DEFAULTTUNE_virtclass-multilib-lib32 = "mips64-n32" DEFAULTTUNE_virtclass-multilib-lib64 = "mips64" Only one of the mips64-n32 or mips64 toolchains is built. Causing the other to be unavailable. This is due to both recipes ending up with the same PN. The toolchain uses the TRANSLATED_TARGET_ARCH in it's name, however the target for mips64 and mips64 n32 were the same, causing the conflict. Avoid this conflict by adding the ABIEXTENSION to the name. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>