summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2014-03-24archiver.bbclass: make it can filter the licenseRobert Yang3
* Filter the license (default: no), the recipe whose license in COPYLEFT_LICENSE_INCLUDE will be included, and in COPYLEFT_LICENSE_EXCLUDE will be excluded. * The user can set the recipe type that would be archived (native, target, and so on), deafult to all. The copyleft_filter.bbclass is come from copyleft_compliance.bbclass, which is used by both copyleft_compliance.bbclass and archiver.bbclass. [YOCTO #5740] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24gtk-engines: move engine schemas to a dedicated packageRoss Burton1
The GTK+ engine schemas are not insignicant in size but also mostly useless. Put them in a sub-package instead of PN so they only get installed when explicitly required. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24gtk-engines: don't inherit gtk-icon-cacheRoss Burton1
This was accidently left in and can be removed. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24util-linux: build setpriv requires libcap-ngRobert Yang1
There might a failure when build util-linux with the meta-selinux layer: [snip] sys-utils/setpriv.c:21:20: fatal error: cap-ng.h: No such file or directory #include <cap-ng.h> ^ compilation terminated. [snip] Use PACKAGECONFIG to fix the problem. [YOCTO #6026] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24connman: upgrade to 1.22Jonathan Liu1
Highlights: - If VPN is split routed and not the default service, then allow DNS queries also to be sent to VPN DNS server. - Session API fixes - Memory leak fixes - Crash fixes - NTP kiss-of-death packet support - Support for full USB gadget networking. Now USB gadget network can be used without tethering. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24libsoup-2.4: fix compiling failed while mips-gcc optimization enabledHongxu Jia2
There was an error about mips-gcc optimization while compiling libsoup-2.4 2.45.3 with DEBUG_OPTIMIZATION enabled. The test code of libsoup-2.4 2.45.3 triggered gcc assert which located in gcc/dwarf2out.c:20810: ... 20806 gcc_assert (prev 20807 && (CALL_P (prev) 20808 || (NONJUMP_INSN_P (prev) 20809 && GET_CODE (PATTERN (prev)) == SEQUENCE 20810 && CALL_P (XVECEXP (PATTERN (prev), 0, 0))))); ... The issue test code is the C function 'do_qvalue_tests' located in tests/header-parsing.c. The 2.45.92 have refactored the test code and this issue has been fixed. So backport the fix to 2.45.3. [YOCTO #5512] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-24acl: fix the order of expected output of getfaclChong Lu2
The result of getfacl is sorted by user id. In Centos or RHEL, bin user id is 1 and daemon user id is 2. But in our image, bin user id is 2 and daemon user id is 1. The patch fixes this issue to make ptest pass. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-23busybox: disable fsck.minix and mkfs.minixJonathan Liu1
The MINIX and MINIX 2 filesystems are not really used anymore. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-22classes/image: ignore modules.* changing during multilib image constructionPaul Eggleton1
Since we now run depmod when building images (as the postinst that does this is now on kernel-base instead of kernel-image) it is possible to have module file differences between the two halves of the multilib image, and the code that checks for such differences detects this and fails. Whitelist this file to avoid the failure. Specifically, modules.alias, modules.dep and modules.symbol can differ along with their .bin counterparts. Related to fix for [YOCTO #5392]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21classes/kernel: move module postinst commands to kernel-basePaul Eggleton1
Since kernel-base is the package that contains the files that depmod needs to run, we should be running depmod from the kernel-base postinstall rather than kernel-image. Fixes [YOCTO #5392]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gtk-engines: removed gnome inheritanceRoss Burton1
Remove gconf class (via gnome) to fix WARN-QA message regarding --disable-install-schemas option. Add missing intltool-native build dependency that previously came through gnome.bbclass. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21classes/image: disable pam nullok_secure with debug-tweaksPaul Eggleton1
If you want passwordless logins to work with pam enabled, then you can't have "nullok_secure" enabled on pam_unix entries. Add some postprocessing to change these to "nullok" when debug-tweaks is in IMAGE_FEATURES, in order to make passwordless logins with PAM work again. Fixes [YOCTO #5973]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21local.conf.sample.extended: update for the archiverRobert Yang1
Updated it since we have refactored the archiver.bbclass. [YOCTO #5113] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-03-21archiver.bbclass: move a few code to copyleft_compliance.bbclassRobert Yang2
Move the code which is only used by copyleft_compliance.bbclass from archiver.bbclassc, and remove the "inherit archiver" from copyleft_compliance.bbclass. The archiver.bbclass is used for archiving various types of sources, but the copyleft_compliance.bbclass is used for analysing the license, they don't have much relationships. [YOCTO #4986] [YOCTO #5113] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-03-21package_rpm.bbclass: archive the source to srpm packageRobert Yang1
The archiver.bbclass will put the sources to ARCHIVER_OUTDIR according to configuration, then the rpmbuild -bs will create the srpm. [YOCTO #4986] [YOCTO #5113] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-03-21archiver.bbclass: refactor itRobert Yang1
The archiver didn't work, and there were a few problems, for example: 1) There was no src_dir.org (or orig), but the diff command still use it 2) There were a few duplicated code 3) It didn't archive the source for the native or gcc 4) The work flow is not very well 5) The "subprocess.call('fakeroot cp xxxx'" should be removed 6) And others ... So that we have to refactor it, the benefits are: 1) Fix the problems and make it work well. 2) Reduce more than 300 lines 3) Make it easy to use. Hre are the explanation about the bbclass: This bbclass is used for creating archive for: 1) original (or unpacked) source: ARCHIVER_MODE[src] = "original" 2) patched source: ARCHIVER_MODE[src] = "patched" (default) 3) configured source: ARCHIVER_MODE[src] = "configured" 4) The patches between do_unpack and do_patch: ARCHIVER_MODE[diff] = "1" And you can set the one that you'd like to exclude from the diff: ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches" 5) The environment data, similar to 'bitbake -e recipe': ARCHIVER_MODE[dumpdata] = "1" 6) The recipe (.bb and .inc): ARCHIVER_MODE[recipe] = "1" All of the above can be packed into a .src.rpm package: (when PACKAGES != "") ARCHIVER_MODE[srpm] = "1" [YOCTO #4986] [YOCTO #5113] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-03-21classes/archive*.bbclass: remove archive-*-source.bbclassRobert Yang4
Nearly all of the codes in the following 3 files are the same, we can move the code to archiver.bbclass and remove them: archive-configured-source.bbclass archive-original-source.bbclass archive-patched-source.bbclass [YOCTO #5113] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-03-21gnome-doc-utils: removed gconf inheritanceAlexandru Palalau1
In order to remove WARN-QA message regarding --disable-schemas-install configure option. Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gsettings-desktop-schemas: removed unneeded class inheritanceAlexandru Palalau1
Removed gconf, gtk-icon-cache and mime classes as they are not needed Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gnome-mime-data: removed gconf and gtk-icon-cache inheritanceAlexandru Palalau1
Should remove WARN-QA message regarding --disable-schemas-install. gtk-icon-cache is not needed. Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gst-plugins-gl: removed gconf inheritanceAlexandru Palalau1
In order to remove WARN-QA message regarding --disable-schemas-install configure option. Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gnome-desktop: removed gconf inheritanceAlexandru Palalau1
In order to remove WARN-QA message regarding --disable-schemas-install configure option. Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21core-image-minimal: allow user to set sizeTrevor Woerner1
Allow the user, in their local configuration, to override the size of the final image. This is useful when creating an image for (for example) an SD card and the user wants the image to fill up the card as much as possible. Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21python3: sync module dependencies from 2.7Paul Eggleton2
These have been added recently to 2.7 but were missing in the 3.3 script/inc file. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-03-21generate-manifest-3.3.py: sync descriptions with 2.7 versionPaul Eggleton2
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-03-21libsdl: add missing libglu dependency for openGLKoen Kooi1
Configure checks for glu.h to determine if openGL is available. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21kernel-arch.bbclass: add arm64 support to U-Boot architecture mapFathi Boudra1
to define UBOOT_ARCH, we map kernel architectures to U-Boot architectures. In the case of arm64 kernel, we should map to arm U-boot architecture. This patch add the exception rule to the map_uboot_arch function. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21runqemu: Add option for custom BIOS directoryRicardo Neri1
Add support to specify a directory for custom BIOS, VGA BIOS and keymaps as supported by qemu (-L option). Even though this can be done through qemuparams, having this option provides better user experience by not having to specify a long and cluttered path along with other qemuparams that the user might want to specify. This new options assumes first that the path provided is relative to OECORE_NATIVE_SYSROOT and will check whether it exists before proceeding. If not, it will treat the provided path as absolute. This provides the user flexibility to use BIOS binaries generated inside or outside the OE build environment. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21base-files: use /dev/root in /etc/fstab for systemd supportJonathan Liu1
systemd does not recognize "rootfs" in /etc/fstab so the root filesystem is not checked. As a result, the following message is logged by journalctl: systemd-fstab-generator[68]: Checking was requested for "rootfs", but it is not a device Changing "rootfs" to "/dev/root" in /etc/fstab allows systemd to check the root filesystem when the kernel is booted with the root filesystem mounted read-only. [YOCTO #5950] Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21tclibc-uclibc: Changing assignment to conditional variable assignmentAndrey Belous1
Setting of a variable PREFERRED_PROVIDER_virtual/libc only if it doesn't have a value Signed-off-by: Andrey Belous <abelous@broadcom.com> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21pulseaudio: Upgrade 4.0 -> 5.0Khem Raj2
bluetooth-proximity has been removed in 5.0 pulseaudio now differentiates between bluez4 and bluez5 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21sstate: list missing files for toasterAlexandru DAMIAN1
Toaster needs to record the attempts to restore setscene tasks that don't have a sstate file. We build a list of tasks for which we can't find an sstate file, and if we're running under Toaster data collection, we send it off with a MetadataEvent. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21toaster.bbclass: read the data needed for license manifest pathCristiana Voicu1
The license.manifest file is located in DEPLOY_DIR_IMAGE/licenses/ IMAGE_NAME dir. The data needed is collected after rootfs task. [YOCTO #5649] Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gcc-runtime: Build libatomicCosmin Paraschiv1
GCC 4.8 includes a new runtime library, libatomic, which supports atomic operations not supported by hardware or the OS. Build it, so other packages can link against it, if needed. Signed-off-by: Cosmin Paraschiv <cosmin.paraschiv@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21image_types.bbclass: use 4096 instead of 8192 bytes-per-inodeRobert Yang1
The image not correctly created if 'ptest-pkgs' is in IMAGE_FEATURES, this is because there is no free inode left. We can use 4096 instead of 8192 bytes-per-inode to fix the problem, and most of the distributions us 4096, such as Ubuntu, Suse, Fedora and CentOS. There are another problems: * There are error message when there is no free inode left if we run the mke2fs command manually, but they are not in log.do_rootfs. * The image generation doesn't stop when error happens because mke2fs doesn't return failed for this case. Will fix them in other threads. [YOCTO #5957] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21buildhistory.bbclass: create proper dependency files for SDKLaurentiu Palcu1
The old functions were calling the list_installed_packages() wrapper function that only listed the packages in an image rootfs. Even for target/host SDK. Also, a python crash was possible if 'bitbake -c populate_sdk core-image-*' was called without calling 'bitbake core-image-*' first. That's because the wrapper was always looking into the image rootfs... This commit fixes the problem and calls the right wrapper for image/sdk. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21image.bbclass, license.bbclass: adjust the name of list_installed_packages()Laurentiu Palcu2
The old wrapper got renamed to image_list_installed_packages(). Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21rootfs.py, sdk.py: adjust/create the wrappers for creating installed ↵Laurentiu Palcu2
packages list Since we created a new PkgsList object that will deal with listing the installed packages in a rootfs, use the new class both for images and SDKs in the wrapper functions. The old list_installed_packages() wrapper listed only the packages inside an image rootfs. It didn't deal with target/host SDK rootfs's. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21package_manager.py: create separate class for installed packages listingLaurentiu Palcu1
This commit creates a new class that has the only purpose to generate various listings of installed packages in the rootfs. Basically, the methods involved in listing the installed packages, that were part of each backend PM class implementation, were moved to this new class. This change avoids instantiating a new PM object just to get the list of installed packages in a certain rootfs. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21linux-dummy: provide kernel-modules (empty) packageMatthieu Crapet1
Like it is done in kernel.bbclass Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21cogl-1.0 : Update to 1.16.2 releasePrabhu Sundararaj2
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21gsettings-desktop-schemas: Updated to 3.10.1.bbPrabhu Sundararaj1
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21cairo: Add 'egl' and 'glesv2' PACKAGECONFIG optionsOtavio Salvador1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21scripts/cleanup-workdir: Fix a comment typoOtavio Salvador1
s/Romve/Remove/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21e2fsprogs: return error when failed to populate fsRobert Yang2
We need return retval when "mke2fs -d" failed, otherwise the "$?" would be 0 which is misleading. [YOCTO #6011] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21alsa-tools: fix build when x11 and gtk+ not availableSimone Agresta1
Updated patch to work with alsa-tools version 1.0.27 Signed-off-by: Simone Agresta <simone.agresta@bticino.it> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21perf: add libexec and traceevent to packagesBruce Ashfield1
Recent versions of perf may install files into /usr/libexec/perf-core and in /usr/lib/traceevent. To avoid packaging QA errors, we add these two directories to the FILES variables. We also add: INHIBIT_PACKAGE_DEBUG_SPLIT="1" to avoid the following issue (due to a trailing / being removed): ERROR: debugedit failed with exit code 256 ... debugedit: canonicalization unexpectedly shrank by one character And finally, we must ensure that the traceevent libraries are installed to the proper multilib library path. If building some multlibs, the incorrect library path will be selected by perf, since it triggers via: ifeq ($(ARCH),x86_64) (or similiar mechanism per arch). In a 32 bit build, with a 64 bit multilib, the arch won't match and the detection of a 64 bit build (and library) are not exected. To ensure that libraries are installed to the correct location, we can make the substitution in the config/Makefile. For non multilib builds, this has no impact. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21fontcache.bbclass: add fontconfig-utils runtime dependencyMatthieu Crapet4
In an image recipe, you can get a warning, for example: WARNING: The postinstall intercept hook 'update_font_cache' failed (exit code: 1)! See log for details! WARNING: The postinstalls for the following packages will be postponed for first boot: ttf-dejavu-sans-mono (because /usr/bin/fc-cache is missing) In OE-core, rdepend is correctly done in each recipe: - ttf-fonts/liberation-fonts - ttf-fonts/ttf-bitstream-vera In meta-OE, rdepend is not done but packagegroup-fonts-truetype.bb includes fontconfig-utils: - ttf-fonts/ttf-arphic-uming - ttf-fonts/ttf-dejavu - ttf-fonts/ttf-droid - ttf-fonts/ttf-gentium - ttf-fonts/ttf-hunkyfonts - ttf-fonts/ttf-inconsolata - ttf-fonts/ttf-liberation - ttf-fonts/ttf-mplus - ttf-fonts/ttf-sazanami - ttf-fonts/ttf-ubuntu-font-family - ttf-fonts/ttf-wqy-zenhei Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21genext2fs: remove itRobert Yang27
Remove genext2fs since we don't use it anymore, it can't support ext4 well, either. We have used "mke2fs -d" to instead of it. [YOCTO #6013] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21generate-manifest-2.7.py: sync with python-2.7-manifest.incPaul Eggleton1
Some changes were made earlier by me to SUMMARY values in python-2.7-manifest.inc without changing the manifest script. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 06:02:39 +0000