summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2018-08-28busybox/mdev-mount.sh: Fix partition detect and cleanup mountpoint on failMike Looijmans1
This fixes issues mainly seen when mounting eMMC devices: The wildcard /sys/block/${DEVBASE}/${DEVBASE}*1 matches both "mmcblk0p1" and "mmcblk0boot1" for example, and this results in syntax errors. Fix this by searching for a "partition" file instead, which only exists for real partitions and not 'fakes' like the eMMC extra's. When mount fails, the mountpoint file is left behind, causing later attempts at auto-mounting it to fail. If mount fails, remove the mountpoint, leaving the system in the state as it was before the mount attempt. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-28blktrace: Security fix CVE-2018-10689Yi Zhao2
CVE-2018-10689: blktrace (aka Block IO Tracing) 1.2.0, as used with the Linux kernel and Android, has a buffer overflow in the dev_map_read function in btt/devmap.c because the device and devno arrays are too small, as demonstrated by an invalid free when using the btt program with a crafted file. References: https://nvd.nist.gov/vuln/detail/CVE-2018-10689 Patch from: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/blktrace.git/commit/?id=d61ff409cb4dda31386373d706ea0cfb1aaac5b7 Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-28package.bbclass: only one hardlink of separated debug info file in each ↵Hongxu Jia1
directory While multiple hardlinks of binary located in different dirs, there are also multiple hardlinks of separated debug info file with the same binary name in same debug dirs. But in each dir, only one debug file with original name works. Because all of binary hardlinks have one `.gnu_debuglink' which is added in `splitdebuginfo'. It caused gdb could not find debugging symbols. [Before the patch] $ find . ./usr/bin/foo ./usr/bin/foo-hd1 ./usr/bin/.debug ./usr/bin/.debug/foo ./usr/bin/.debug/foo-hd1 ./usr/libexec/foo-hd2 ./usr/libexec/.debug ./usr/libexec/.debug/foo-hd2 $ readelf --debug-dump usr/libexec/foo-hd2 Contents of the .gnu_debuglink section: Separate debug info file: foo $ gdb usr/libexec/foo-hd2 Reading symbols from usr/libexec/foo-hd2...(no debugging symbols found)...done. [Before the patch] [Apply the patch] $ find . ./usr/bin/foo ./usr/bin/foo-hd1 ./usr/bin/.debug ./usr/bin/.debug/foo ./usr/libexec/foo-hd2 ./usr/libexec/.debug ./usr/libexec/.debug/foo $ gdb usr/libexec/foo-hd2 Reading symbols from usr/libexec/foo-hd2...Reading symbols from usr/libexec/.debug/foo...done. [Apply the patch] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-24utils.bbclass: fix KeyError exceptionChen Qi1
The following statement was accidently removed. Add it back. values['ml'] = [''] This patch fixes the following error. Exception: KeyError: 'ml' Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-24mingetty: fix usrmerge install pathMingli Yu1
Update /sbin to $base_sbindir to fix the below warning when usrmerge enabled in DISTRO_FEATURES. WARNING: mingetty-1.08-r3 do_package: mingetty: NOT adding alternative provide /usr/sbin/getty: /usr/sbin/mingetty does not exist WARNING: mingetty-1.08-r3 do_package: QA Issue: mingetty: Files/directories were installed but not shipped in any package: /sbin /usr/sbin Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-24mdadm: fix usrmerge install pathMingli Yu1
Update /lib to $nonarch_base_libdir to fix the below error when usrmerge enabled in DISTRO_FEATURES. ERROR: mdadm-4.0-r0 do_package_qa: QA Issue: mdadm package is not obeying usrmerge distro feature. /lib should be relocated to /usr. [usrmerge] Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-24swig: Remove superfluous python dependencyJoshua Watt1
The actual dependency on native Python and is handled by inheriting python3native Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-24scripts: Add autobuilder worker test scriptRichard Purdie1
Add a script which can be run on new autobuilder workers to check all needed configuration is present. Designed to be run in a repo where bitbake/oe-core are already present. This means when we add new autobuilder workers, we can quickly test whether all the needed funcationality to support the standard yocto project autobuilder (ie. the standard OE-Core tests) are present. It uses images prebuilt in a previous release to cut build/testing time. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23util-linux: upgrade 2.32 -> 2.32.1Chen Qi1
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23distcc: 3.3 -> 3.3.2Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23elfutils: 0.172 -> 0.173Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23dbus-test: 1.12.8 -> 1.12.10Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23dbus: 1.12.8 -> 1.12.10Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23pciutils: 3.6.1 -> 3.6.2Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23diffstat: 1.61 -> 1.62Robert Yang2
Refresh avoid-check-user-break-cc.patch to fix fuzz warning. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23strace: 4.23 -> 4.24Robert Yang2
Remove backported patch 0001-tests-fix-build-with-fresh-glibc.patch. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23oeqa/core/decorator: add skipIfInDataVarRichard Leitner1
skipIfInDataVar will skip a test if a value is in a certain variable. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23ltp: Fix ftest06 too small file path stringHe Zhe2
The name string is too small to contain normal full path names and causes the following failure. "ftest06 2 TFAIL : ftest06.c:223: Can't chdir(): errno=ENOENT(2): No such file or directory" Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23openssl: remove dependency on relative_symlinks classAndre McCurdy2
Although the relative_symlinks class converts any absolute symlinks in ${D} into relative symlinks automatically, it's a little clearer to create relative symlinks directly where possible. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23compress_doc.bbclass: Clean up getstatusoutput usageRobert Yang1
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23psplash: Clean up getstatusoutput usageRobert Yang1
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23lib/oe/patch.py: Clean up getstatusoutput usageRobert Yang1
We can't use subprocess.check_output() or subprocess.call() here since the one who invokes runcmd() needs handle CmdError() exception (error out or ignore it). Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23lib/oe/gpg_sign.py: Clean up getstatusoutput usageRobert Yang1
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23utils: Fix patch merging errorRichard Purdie1
The previous patch has duplicate split calls and one needs to be removed to avoid failures Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23utils: Rely on get_multilib_datastore() to get the original datastoreRichard Purdie1
get_multilib_datastore() should be able to handle the original datastore correctly now so rely upon this rather than custom coding. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23glibc-ld: Simplify/cleanup multilib handling to use library functionsRichard Purdie1
We have library functions to handle multilib variables/datastores, lets use them so we have good common functions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23lib/oe/utils: Fix get_multilib_datastore to work for original tuneRichard Purdie1
Currently the original datastore returned by this function doesn't always work as the tune isn't set back to the original. Fix it to work like all_multilib_tune_list() in utils.bbclass and correct the data returned. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23glibc: Improve ldd loader specificationRichard Purdie1
Currently if a tune isn't specified in the table, the loader defaults for the architecture are used which may or may not match our path specification. This leads to general confusion. Change the code to use the linuxloader class which works of architecture, not tune. This still isn't perfect as n32/x32 aren't covered but its an improvement to listing all tunes here. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23linuxloader: Convert to python functionRichard Purdie3
We could do with one decent general purpose python function to query the path to the dynamic loader. Convert the shell code into python. Also correct baremetal to return "None", not musl loaders. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23lib/oe/package.py: use bb.utils.break_hardlinks helperRasmus Villemoes1
This does the same thing, but is more efficient in case st_nlinks is (already) 1. Depends on bitbake commit 7ae93cf40ab91965147055100432961436bce46c . Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23package.bbclass: use bb.utils.break_hardlinks helperRasmus Villemoes1
This does the same thing, but is more efficient in case st_nlinks is (already) 1. Depends on bitbake commit 7ae93cf40ab91965147055100432961436bce46c . Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23sanity.conf: Update minimum bitbake version to 1.39.1Richard Purdie1
We need this for the new break_hardlinks helper function. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23patch: fix CVE-2018-6952Hongxu Jia2
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23perl: CVE-2018-12015Jagadeesh Krishnanjanappa2
Remove existing files before overwriting them Archive should extract only the latest same-named entry. Extracted regular file should not be writtent into existing block device (or any other one). https://rt.cpan.org/Ticket/Display.html?id=125523 Affects perl <= 5.26.2 Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23libarchive: CVE-2017-14503Jagadeesh Krishnanjanappa2
Reject LHA archive entries with negative size. Affects libarchive = 3.3.2 Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23libsndfile1: CVE-2017-14634Jagadeesh Krishnanjanappa2
double64_init: Check psf->sf.channels against upper bound This prevents division by zero later in the code. While the trivial case to catch this (i.e. sf.channels < 1) has already been covered, a crafted file may report a number of channels that is so high (i.e. > INT_MAX/sizeof(double)) that it "somehow" gets miscalculated to zero (if this makes sense) in the determination of the blockwidth. Since we only support a limited number of channels anyway, make sure to check here as well. CVE-2017-14634 Closes: #318 Affects libsndfile1 = 1.0.28 Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23libsndfile1: CVE-2017-14245 CVE-2017-14246Jagadeesh Krishnanjanappa2
sfe_copy_data_fp: check value of "max" variable for being normal and check elements of the data[] array for being finite. Both checks use functions provided by the <math.h> header as declared by the C99 standard. Fixes #317 CVE-2017-14245 CVE-2017-14246 Affects libsndfile1 = 1.0.28 Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23gnutls: drop PACKAGECONFIG options for SSL v3 and TLS v1.3Andre McCurdy1
By including PACKAGECONFIG options, the recipe takes responsibility for defining the default state of these options. Although the recipe currently aligns with the gnutls defaults (ie both disabled) tracking new gnutls releases will be a maintenance effort. Unless there's a clear reason to do otherwise, it seems safer to leave the choice of which SSL/TLS versions to enable by default up to the gnutls developers. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23gnutls: drop obsolete configure.ac patchAndre McCurdy2
>From gnutls 3.5.8 onwards, the code in configure.ac has been passing "basename $i" to sed, rather than "echo $i". Since the full ${srcdir} path is not being processed, there's no risk of unexpected matches. https://gitlab.com/armcc/gnutls/commit/478179316bc815e1ad518ae318f46e94a13b0e1f Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23gnutls: merge gnutls.inc into the gnutls recipeAndre McCurdy2
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23oeqa/runtime/ldd: Clean up testRichard Purdie1
* Merge the two tests together as having them separate is pointless * Test that ldd runs correctly * Add in a dependency on the "ldd" package being installed instead of the sdk tools feature Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23u-boot: patch for CVE-2018-1000205Changqing Li3
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23perl: avoid using += with an over-rideAndre McCurdy2
Using += with an over-ride can be a source of confusion so try to avoid the construct in core recipes. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23freetype: Upgrade 2.9 -> 2.9.1Changqing Li2
The -config script can now be disabled from configure. Drop backported patch now merged. Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23libxml-parser-perl: fix "...contains bad RPATH"Jens Rehsack1
The perl distribution "XML-Parser" relies for configuration on the tooling of Devel::CheckLib - which is not aware of sysroot locations nor of reasonable compiler/link definitions from outside. This causes ERROR: libxml-parser-perl-2.44-r0 do_package_qa: QA Issue: package libxml-parser-perl contains bad RPATH ${BUILDDIR}/tmp/work/core2-64-poky-linux/libxml-parser-perl/2.44-r0/recipe-sysroot/usr/lib in file ${BUILDDIR}/tmp/work/core2-64-poky-linux/libxml-parser-perl/2.44-r0/packages-split/libxml-parser-perl/usr/lib/perl/vendor_perl/5.24.4/auto/XML/Parser/Expat/Expat.so package libxml-parser-perl contains bad RPATH ${BUILDDIR}/tmp/work/core2-64-poky-linux/libxml-parser-perl/2.44-r0/recipe-sysroot/usr/lib in file ${BUILDDIR}/tmp/work/core2-64-poky-linux/libxml-parser-perl/2.44-r0/packages-split/libxml-parser-perl/usr/lib/perl/vendor_perl/5.24.4/auto/XML/Parser/Expat/Expat.so [rpaths] ERROR: libxml-parser-perl-2.44-r0 do_package_qa: QA run found fatal errors. Please consider fixing them. ERROR: libxml-parser-perl-2.44-r0 do_package_qa: Function failed: do_package_qa It's strongly encouraged to the maintainer @toddr to rework the toolchain for up to date environments. [RP: Added fix for nativesdk RPATH issues too] Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23cpan.bbclass: adopt to recent EU::MMJens Rehsack1
The modern the time, the improvements in ExtUtils::MakeMaker. Nowadays, .packlist and perllocal.pod aren't touched anymore when appropriate flags set during configure stage. Controlling the flags globally avoids dual-life recipes need share patching. Further: remove prepending ${PERL_ARCHLIB} in PERL5LIB - it's wrong (search order is site_lib, vendor_lib, core) - and ${PERL_ARCHLIB} contains core libpath only ... Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23cryptodev-linux: Fixes a kernel crash observed with cipher-gcm testHongzhi.Song4
The crypto API for AEAD ciphers changed in recent kernels, so that associated data is now part of both source and destination scatter gathers. The source, destination and associated data buffers need to be stiched accordingly for the operations to succeed. Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23u-boot: Fix inconsistent indentationAlexander Hedges1
This removes some extra spaces. Signed-off-by: Alexander Hedges <ahedges@ethz.ch> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23libinput: upgrade 1.11.2 -> 1.11.3Maxin B. John1
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-23acpid: upgrade 2.0.29 -> 2.0.30Maxin B. John1
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-20 23:40:23 +0000