summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2015-01-23grub-efi: bump the PRRobert Yang1
Fixed when rebuild: configure: error: source directory already configured; run "make distclean" there first grub doesn't need bump since it always uses autotools (not autotools-brokensep in the past). Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23neard: fix B != SRobert Yang2
And bump PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23neard: fix parallel issueRobert Yang2
There might be no src dir if the src/builtin.h runs earlier, create it to fix the race issue: src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h /bin/sh: src/builtin.h: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23guile: fix installed-vs-shipped errorRobert Yang2
Fixed: guile-2.0.11: guile: Files/directories were installed but not shipped /usr/lib64/libguile-2.0*-gdb.scm [installed-vs-shipped] This is because when there is no file in the directory: for f in libguile-2.0*; do [snip] done The f would be libguile-2.0* itself, use install-exec-hook will fix the problem since it depends on install-libLTLIBRARIES. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23Revert "guile: fixed installed-vs-shipped error"Robert Yang2
This reverts commit 397f27cdceaa4874d8d06aad10cd37a5817d90b8. The fix isn't correct, caused: install: cannot create regular file `/path/to/sysroots/x86_64-linux/usr/lib/libguile-2.0.so.22.7.2': File exists will add a new fix. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23base.bbclass: detect when S has been set incorrectlyPetter Mabäcker1
Currently base.bbclass is creating S if it's not created by unpacking an archive or fetching a repository. If we avoid creating S we can detect when S hasn't been set correctly, since it will not exist. Then we can tell the user that they should set S to a proper value, instead of just failing with odd errors in later tasks. Besides removing the auto-creation of S this change will introduce a warning if S is set incorrectly. The reason for not display an error and return is due to all external layers that might have recipes that will fail otherwise and that might be a bit to hard to start with. So use a warning until people have had a chance to cleanup affected recipes. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23meta: set proper S valuePetter Mabäcker24
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23xorg-minimal-fonts: set and handle S in a proper wayPetter Mabäcker1
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Also do some minor adjustment after changing value of S. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23lsof: handle S in a proper wayPetter Mabäcker1
Since lsof are doing two unpacks and S should be set to match the second unpack of an internal archive, we should let the build system know that we are aware of this. Solve this by temporarily set S like lsof are doing with SRC_URI. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23makedevs: set and handle S in a proper wayPetter Mabäcker1
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Also do some cleanup of code not needed after changing value of S. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-23gnutls: fix sed commandRobert Yang2
The "sed 's/.bak//g'" matchs "bitbake", which would cause strange errors when the S contains "bitbake", fix to "sed 's/\.bak$//'`" Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23python3: fix for cross compilingRobert Yang4
Fixed: * python3 has introduced _PYTHON_PROJECT_BASE which is used for separate B and S, but it doesn't work when compile Modules, the target python3 runs python3-native's sysconfig to get srcdir which is the native's, there would be errors when native's srcdir has been removed, add _PYTHON_PROJECT_SRC to fix the problem. * Check cross_compiling when get FLAGS Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23curl: Add PACKAGECONFIG for sambaMaxin B. John1
curl 7.40.0 added support for the SMB/CIFS protocol. So provide a PACKAGECONFIG option for smb. Reported-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23at-spi2-core: pass correct path to dbus-daemonRoss Burton1
at-spi2-core tries to find the dbus-daemon binary and hard-codes this path in a script. The first dbus-daemon it finds is the one in the target sysroot, so explicitly pass the correct path. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23texi2html: update po_document/Makefile.in.in for new gettextRobert Yang2
* The autotools_do_configure updates po/Makefile.in.in, we also need update po_document and po_messages. Fixed: *** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version 0.18 but the autoconf macros are from gettext version 0.19 * Remove fix_gettext_version.patch, it wasn't a correct fix. * Remove unneeded code from do_configure_append/prepend(). Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23texinfo: update po_document/Makefile.in.in for new gettextRobert Yang1
The autotools_do_configure updates po/Makefile.in.in, we also need update po_document. Fixed: *** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version 0.18 but the autoconf macros are from gettext version 0.19 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23gettext: upgrade to 0.19.4Robert Yang11
* gettext: - Update parallel.patch, we only need a part of it. * gettext-minimal-native: - Update related files from gettext-native. - Remove Makevars.template, we didn't use it. - Remove iconv-m4-remove-the-test-to-convert-euc-jp.patch (can be reverse applied). - Update the COPYING (1995 - 2014). * About upgrade gettext-minimal-native (for future's upgrade): - Build gettext-native - Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and gettext-runtime/po/remove-potcdate.sin from gettext-native. - Update COPYING when needed (usually update the year), do not copy the whole COPYING file from gettext-native. - Go to gettext-native's ${S}/gettext-runtime/m4: > Remove lt*.m4 and libtool.m4 > copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/m4/ > tar czvf /path/to/aclocal.tgz *.m4 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23opkg: fix libtoolize errorRobert Yang2
Fixed: libtoolize: error: AC_CONFIG_MACRO_DIRS([m4]) conflicts with ACLOCAL_AMFLAGS=-I shave. They are already included by configure.ac: AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_MACRO_DIR([shave]) Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23libtool: upgraded to 2.4.4Robert Yang17
* Upgrade: - libtool-native - libtool-cross - nativesdk-libtool - libtool * Remove 2 patches: - respect-fstack-protector.patch: already in the new source. - avoid_absolute_paths_for_general_utils.patch: no general.m4sh any more. - Use inline-source to install libtoolize. * Update other patches * The LIC_FILES_CHKSUM is changed because of the indent, the contents are the same. * The libtool config files are put in libtool/build-aux now, it was libtool/config in the past. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23automake: upgrade to 1.15Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23mklibs-native: upgrade to 0.1.40Robert Yang1
Remove the do_configure_prepend, it never worked since the sed command didn't use '-i'. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23autogen-native: upgrade to 5.18.4Robert Yang1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23grub: remove autogen-native dependency for tarball recipesRoss Burton2
The tarballs of grub ship the files that are generated by autogen, so tarball recipes don't need to depend on autogen-native (and thus guile-native). Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23lib/oe/sdk.py: Add SDKIMAGE_INSTALL_COMPLEMENTARY capabilities to DpkgSdkPau Espin Pedrol1
Creating an SDK by means of do_populate_sdk, complementary packages (SDKIMAGE_FEATURES = "dev-pkgs dbg-pkgs") are not installed when using the deb packaging system. The reason is that the call to install the complementary packages is missing from the deb backend. This patch fixes that. [YOCTO #7160] (From OE-Core rev: 0bcca69ea97ac51acf290f8f1da1bde715ab51c4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-21arch-mips.inc: Add the MIPS ABIEXTENSION to toolchain nameMark Hatle1
[YOCTO #7143] When the system is configured for a multilib SDK, such as: require conf/multilib.conf MULTILIBS = "multilib:lib32 multilib:lib64" DEFAULTTUNE = "mips32r2" DEFAULTTUNE_virtclass-multilib-lib32 = "mips64-n32" DEFAULTTUNE_virtclass-multilib-lib64 = "mips64" Only one of the mips64-n32 or mips64 toolchains is built. Causing the other to be unavailable. This is due to both recipes ending up with the same PN. The toolchain uses the TRANSLATED_TARGET_ARCH in it's name, however the target for mips64 and mips64 n32 were the same, causing the conflict. Avoid this conflict by adding the ABIEXTENSION to the name. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-17depmodwrapper-cross: Update to use STAGING_KERNEL_BUILDDIRRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-16lib/oe/rootfs.py: Fix reference to abiversion file locationRichard Purdie1
With the changes to kernel layout, we need to refer to the correct location of the kernel abiversion file. Thanks to Saul, Randy, Darren and Bruce to figuring out the issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-16xserver-xorg: Always disable systemd-logind.Randy Witt1
Without a dm to handle the session management systemd-logind can make it difficult for X to gain ownership of devices and behave properly. Since X seems to work without enabling systemd-logind, always disable it for now, and we can revisit it if we ever want to try to take advantage of multi-user sessions/seats. [Yocto # 7100] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-16glibc: Fix up minimal build with libc-libmSaul Wold2
This addresses 2 issues discovered trying to build a minimal libc with libm option. By default nscd was always being built and without inet enabled there were missing symbols. [YOCTO #7108] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16msmtp: fix configure optionsRoss Burton1
msmtp moved from gnome-keyring to libsecret, so update EXTRA_OECONF. Also explicitly disable libgsasl to avoid potential non-deterministic builds in the future. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16kexec-tools: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16presentproto: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16rpm: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16icon-naming-utils: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16libfm: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16libfm-extra: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16connman: fix B != SRobert Yang2
And bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16python: fix B != SRobert Yang3
And bump PR to avoid: gcc: error: Parser/tokenizer_pgen.o: No such file or directory gcc: error: Parser/printgrammar.o: No such file or directory gcc: error: Parser/pgenmain.o: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16alsa-utils: fix B != SRobert Yang2
And bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16libcroco: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16gnome-desktop-testing: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16qemu: fix B != SRobert Yang1
And bump PR to avoid: Makefile:16: *** This is an out of tree build but your source tree (/path/to/qemu-2.2.0) seems to have been used for an in-tree build. You can fix this by running "make distclean && rm -rf *-linux-user *-softmmu" in your source tree. Stop. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16apr-util: fix B != SRobert Yang1
And bump PR to avoid: x86_64-linux-libtool: error: 'dbm/apr_dbm_gdbm.la' is not a valid libtool archive Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16expect: separate B and SRobert Yang1
And bump the PR to avoid: install: cannot stat `/path/to/image/usr/lib64/expect5.45/libexpect*.so': No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16oprofile: separate B and SRobert Yang2
And bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16pinentry: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16bash: separate B and SRobert Yang2
It works well now, and bump the PR to avoid: x86_64-poky-linux-ar: shmatch.o: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16gnutls: separate B and SRobert Yang2
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16libgcrypt: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16flac: separate B and SRobert Yang1
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Remove the CLEANBROKEN. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 06:15:51 +0000