summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2014-12-21meta-environment: don't mark tasks as nostampPaul Eggleton1
With siggen being changed to alter the signature of nostamp tasks on the fly, having these tasks as nostamp results in the SDK being rebuilt every time, which is not desirable. In any case this is just legacy from the days before we used signatures to take care of ensuring these tasks get re-run when they need to be. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21core-image-sato-sdk: Use kernel-devsrc to ensure kernel module builds workRichard Purdie1
With the move of the kernel source to the kernel-devsrc, we need this package to ensure the kernel module sanity tests made on core-image-sato-sdk continue to pass. Therefore update the name of the package included in the image. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21boot-directdisk: Use kernel from DEPLOY_DIR_IMAGE, not sysrootRichard Purdie1
After the recent kernel changes, this avoids failures like: DEBUG: Executing shell function build_boot_dd install: cannot stat '/home/pokybuild/yocto-autobuilder/yocto-worker/build-appliance/build/build/tmp/sysroots/qemux86-64/usr/src/kernel/bzImage': No such file or directory WARNING: exit code 1 from a shell command. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21bootimg: Use deploy artefacts, not STAGING_KERNEL_DIRRichard Purdie1
bzImage is no longer in STAGING_KERNEL_DIR. Rather than add it back, depend on the kernel deploy task and find it in DEPLOY_DIR_IMAGE. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21kernel: Fix non linux-yocto buildsRichard Purdie1
After the recent kernel changes, non linux-yocto builds stopped working properly for two reasons: a) ${S} was being reset to ${WORKDIR}/git for example and STAGING_KERNEL_DIR did not contain the source b) Most builds were using ${B} == ${S} This patch adds a fixup to the unpack function to handle the case where ${S} != ${STAGING_KERNEL_DIR} and also set up the infrastrcture so that B != S for kernel builds from now on. The kernel build system is one of the best for supporting this and there is no good reason not to take advantage of it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21kernel-devsrc: Ensure we don't race against do_make_scripts from ↵Richard Purdie1
module-base.bbclass do_install for kernel-devsrc can race against do_make_scripts from module-base.bbclass. Since there is a lock there to guard against concurrency already, we can just use it here to avoid a race. Ultimately, this can all likely be much more streamlined but this resolves the immediate build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21kernel-devsrc: Handle ppc crtsaves.o explictly for nowRichard Purdie1
Resolve kernel module build failures for qemuppc by including crtsaves.o. I'm not particularly happy to be doing this, it should perhaps be contained in the kernel-dev package. Until the overlap between kernel-devsrc and kernel-dev is resolved, this at least removed the regressions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20kernel-devsrc: Inherit module-baseRichard Purdie1
As a "normal" recipe, mulitlib would try and extend it for multilibs. By inheriting module-base, we can avoid this since we now look more 'kernel' like. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20kernelsrc.bbclass: Ensure fetch/unpack/patch tasks don't runRichard Purdie1
In particular this removes a race condition where a ${S}/patches directory could be created by do_unpack. This confuses kern-tools. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20linux-libc-headers: Upgrade 3.17 -> 3.17.7Richard Purdie3
Whilst we don't usually take linux-libc-headers point release, 3.17.3 fixes a userspace header issue which caused gdb to fail to build on mips. We therefore may as well upgrade to the latest point release. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20linux-libc-headers: update to 3.17Bruce Ashfield3
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20socat: fix compile erorr against 3.17+ kernel headersBruce Ashfield2
With the linux 3.17 kernel socat's configure detects the wrong include for errqueue.h which results in a compilation error. By backporting the gentoo patch from: http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/socat/files/socat-1.7.2.4-linux-3.17.patch Fixes the build issue Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20linux-yocto/3.14: update to 3.14.26, integrate ltsi and -rt updatesBruce Ashfield3
Updating the 3.14 tree to the latest korg 3.14.26, as well as integrating 3.14 LTSI content, and refreshing preempt-rt. Minor conflict resolutions were performed between ltsi, stable and -rt Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.10: update to v3.10.62Bruce Ashfield3
Updating to the latest korg -stable update for the 3.10 series. Minor merge conflict resolution was done with the standard/ltsi and standard/preempt-rt branches. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.17: update to v3.17.6Bruce Ashfield2
Integrating the latest korg -stable update for v3.17 Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20lttng-modules: fix mm_compaction_isolate_template buildBruce Ashfield2
linux-stable integrated the 3.16 commit f8c9301fa5a2a [mm/compaction: do not count migratepages when unnecessary] with the 3.14.25 update. So we have to update the lttng-module linux version codes to use the new definition in builds greater than 3.14.24 or 3.16. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.14: update to v3.14.24Bruce Ashfield3
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.10: update to v3.10.59Bruce Ashfield3
Updating to the latest 3.10 -korg stable update. We also bring in a meta change for the valley island IO configuration. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.17: update to v3.17.2Bruce Ashfield2
Updating to the korg 3.17.2 -stable release. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20linux-yocto/3.17: update to v3.17.1Bruce Ashfield2
Updating to the kver to the latest korg stable update. This fixes some important bugs (as well as the usual mix of more minor ones), in particular libata bugs and SSD corruption issues are fixed. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20kernel: Clean ${S} before unpackRichard Purdie1
Currently unpack just forces sources over the current files. This change ensures ${S} is cleaned out before sources are unpacked. This resolves issues seen when upgrading to the new kernel class changes. Ultimately, this should probably move to base.bbclass but one step at a time, this solves an immediate problem blocking the other patches from merging. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20sanity: TMPDIR ABI change for kernel processRichard Purdie2
The kernel source is being moved into the sysroot, to do this and preserve previous builds, we need to change the TMPDIR ABI and provide a function to uninstall all kernels from the sysroot. This change adds code to do that and increases the ABI number. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20kernel-yocto: make sure git tags get dereferenced properly in do_patch()Jeff Wang1
Commit 92c1ece6c347030d48995a36f4c67861356e59d3 causes the test in do_patch() in kernel-yocto.bbclass to fail if ${machine_srcrev} is an annotated tag. The check is meant to ensure that ${machine_srcrev} is an ancestor of HEAD, but if ${machine_srcrev} is a tag, then "$(git rev-parse --verify ${machine_srcrev})" evaluates to the SHA of the tag instead of what it's pointing to. Replacing "$(git rev-parse --verify ${machine_srcrev})" with "$(git rev-parse --verify ${machine_srcrev}~0)" fixed the problem by finding the object pointed to by the tag, and not the tag itself. This also works for commit IDs that are not tags, hence is safe in a scenarios. Jeff Wang <jeffrey.wang@ll.mit.edu> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20kernel-yocto: fix non-git buildsBruce Ashfield1
The ability to build non-git repositories was broken by two changes: - The existence of an empty 'patches' directory created during the unpack phase. This dir was incorrectly identified as a valid meta directory and broke the build. By ensuring that it is removed before creating the empty repository, it will no longer be found instead of the real meta directory. - The attempt to reset the git repository to a specific SRCREV when no SRCREV was provided. By checking for a SRCREV of 'INVALID', we avoid any processing and failed git operations. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20lttng/perf: depend on virtual/kernel:do_installBruce Ashfield2
To ensure that the minimal environment has been created for out of tree module builds, perf and lttng should depend on the do_install task of the kernel. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20images: introduce core-image-kernel-devBruce Ashfield1
When building a new kernel, or testing and update to the kernel there are a set of packages that are sensitive to APIs, build system and other changes associated with the kernel. After building this recipe, we can be reasonably sure that a new kernel package and coupled userspace have been built, installed and tested via a single image. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20kerneldev: create kernel-devsrc packagingBruce Ashfield1
kernel-devsrc is responsible for creating and a packaging an environment appropriate for kernel development (on or off target). To create this support, we only need to copy/install the results of the virtual/kernel providers build in the staging dir ... with some minor manipulations to the source tree (.git removal and a clean up). This produces a source tree that is capable of rebuilding the kernel on the target. Installing the kernel-devsrc package on a target (along with a toolchain) is all that remains to be done. $ cd /usr/src/kernel $ make oldconfig $ make -j2 bzImage Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-12-20kernel: fix out of tree module buildsBruce Ashfield1
With the kernel build optimizations, we no longer copy the source from the built kernel into the staging dir, since the kernel is unpacked and built directly from the staging dir. This means that a few build artifacts need to be restored to allow out of tree modules to once again build. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20kernel: Rearrange for 1.8Richard Purdie5
In 1.8 we want to streamline the kernel build process. Basically we currently have multiple copies of the kernel source floating around and the copying/compression/decompression is painful. Lets assume we have a kernel source per machine since in most cases this is true (and we have a sysroot per machine anyway). Basically, instead of extracting a source into WORKDIR, then copying to a sysroot, we now set S to point straight at STAGING_DIR_KERNEL. Anything using kernel source can then just point at it and use: do_configure[depends] += "virtual/kernel:do_patch" to depend on the kernel source being present. Note this is different behaviour to DEPENDS += "virtual/kernel" which equates to do_configure[depends] += "virtual/kernel:do_populate_sysroot". Once we do this, we no longer need the copy operation in do_populate_sysroot, in fact there is nothing to do there (yay). The remaining part of the challenge is to kill off the horrible do_install. This patch splits it off to a different class, the idea here is to have a separate recipe which depends on the virtual/kernel:do_patch and just installs and packages the source needed to build modules on target into a specific package. Right now this code is proof of concept. It builds kernels and kernel modules. perf blows up in do_package with issues on finding the kernel version which can probably be fixed by adding back the right bit of do_install, and adding a dependency of do_package[depends] += "virtual/kernel:do_install" to perf. The whole thing needs a good write up, the corner cases testing and probably a good dose of cleanup to the remaining code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20image: Avoid race over directory creationRichard Purdie1
There is a race over the do_package_qa task and the do_rootfs task since rootfs recreates a directory. This patch disables the task (which isn't used for images) to avoid the race: NOTE: recipe core-image-minimal-1.0-r0: task do_package_qa: Started NOTE: recipe core-image-minimal-1.0-r0: task do_rootfs: Started ERROR: Build of do_package_qa failed ERROR: Traceback (most recent call last): File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 497, in exec_task return _exec_task(fn, task, d, quieterr) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 440, in _exec_task exec_func(func, localdata) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 212, in exec_func exec_func_python(func, d, runfile, cwd=adir) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 237, in exec_func_python os.chdir(cwd) OSError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/build/tmp/work/qemumips-poky-linux/core-image-minimal/1.0-r0/core-image-minimal-1.0' Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20dbus-test: Fix SRC_URI checksum to match dbusRichard Purdie1
If the system fetches dbus first, everything works and the checksum is correct there. If dbus-test fetches first, the checksum is incorrect and wasn't changed with the version upgrade. Fix the checksum. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20report-error: Handle the case no logfile existsRichard Purdie1
If the task fails early, no error log may exist. Currently we crash in that case, this handles the situation more gracefully. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-19security_flags: Fix typo for cupsRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-19busybox-mdev: Support automatic mounting of block devicesmike.looijmans@topic.nl5
Upon inserting a USB stick or similar device, mdev will run an automounter script that mounts valid partitions on /media/<device>. The script first checks /etc/fstab entries so that mounting on UUID or LABEL or using custom mount options is still possible. If /etc/fstab does not contain particular mount options, the script will create (and remove) the mountpoint automatically. The script also supports full disk partitions (devices without partition table). The following environments can be set in /etc/default/mdev: MDEV_AUTOMOUNT=n (Disables automounting completely) MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location) Automatic mounting for a particular device can be disabled by creating a file "/dev/<device>.nomount". This is helpful in scripts that create partitions for example, and want to perform specific actions which require the device to remain unmounted. A more complex variation (using LABEL based mounts) on this script has been in use in OpenPLi for many years now, and I've used this one on many projects already, so it's about time to push this to mainline. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19busybox-mdev: Add hotplug kernel module support to mdev.confmike.looijmans@topic.nl1
Add a line to mdev.conf that tells mdev to load kernel modules when required. For example, if you built wifi support as an external module, inserting a wifi stick into a USB port will now automatically load that module into the kernel and the wlan device will be ready for configuration. Without this patch, you have to load required modules manually or force them to load at system startup. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19busybox/find-touchscreen.sh: Simplify script and recognize USB devicesmike.looijmans@topic.nl1
Simplify the grep expression, use the more common "grep" command instead of "egrep", avoid forking extra processes, join multiple invokations into a single combined expression. Change the touchscreen regex so that it also recognizes various USB touchscreen controllers and the ad7879 i2c device. Based on code used in OpenPLi and meta-topic. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19busybox-mdev: Install missing find-touchscreen.shmike.looijmans@topic.nl1
mdev.conf references the find-touchscreen.sh script, but this file was not being installed. Add the script to the busybox-mdev package. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19powertop: Fix build for !uclibcMartin Jansa1
* EXTRA_LDFLAGS isn't defined for !uclibc and configure fails when it reads it unexpanded, see config.log snippet: configure:4177: checking whether the C compiler works configure:4199: i586-oe-linux-gcc -m32 -march=i586 --sysroot=/OE/sysroots/qemux86 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed ${EXTRA_LDFLAGS} conftest.c >&5 i586-oe-linux-gcc: error: ${EXTRA_LDFLAGS}: No such file or directory configure:4203: $? = 1 configure:4241: result: no Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19common-licenses: add SMAIL_GPLRoss Burton1
This is used by debianutils. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19wic: add globbing support in IMAGE_BOOT_FILES entriesMaciej Borzecki1
Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by glob are by default installed under their basename, as this is likely most common use case. Target name for globbed entries specifies the name of directory in which files will be installed withing the partition. Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19wic: IMAGE_BOOT_FILES format checks in bootimg-partition sourceMaciej Borzecki1
Check for malformed entries in IMAGE_BOOT_FILES, fail early if such entries were found. Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19mesa: add PACKAGECONFIG support for gallium XA state trackerNicolas Dechesne1
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19vala: Add Upstream-Status to patchSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19oprofile: add missing Upstream-StatusRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19which: add missing Upstream-StatusRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19udev-cache: refactor conditionals and error handlingRichard Tollerton1
Most of /etc/init.d/udev-cache is in a conditional block which can be replaced by a `[ ... ] || exit 0` to reduce nesting. This also provides an opportunity to add some additional messages when VERBOSE is set. Capture and report errors encountered in the cache generation process, using set -e and trap EXIT. These errors were previously being ignored. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
2014-12-19udev-cache: Update cache asynchronouslyRichard Tollerton1
Don't hold up the boot while the cache is being updated. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com>
2014-12-19udev-cache: invalidate on rules.d changesRichard Tollerton2
Presently, the cache is not regenerated if udev rules are modified, which may cause the cache to preserve an old configuration. To fix, include the size, mtime, and filename of all udev rules in the system configuration. This change requires `stat`. If busybox supplies stat, CONFIG_FEATURE_STAT_FORMAT must be enabled. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
2014-12-19udev-cache: always warn on console if invalidatedRichard Tollerton1
Failure to use the udev cache is a significant enough impact to the boot time (possibly seconds) that it should always be reported on the console, regardless of the VERBOSE setting. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
2014-12-19udev-cache: Clean up message when cache is invalidatedRichard Tollerton1
Replace a bunch of echo's with a single cat<<EOF. Take this opportunity to more clearly communicate what is going on with the cache and what files are being looked at. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>