summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2010-11-01bitbake/siggen: Fix finalise call argumentsRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Poky -> Yocto name changeRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation: Update copyright to the Linux FoundationRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation/yocto-qs: Fix references to a poky-qemu package and replace ↵Richard Purdie1
with the yocto toolchain tarball Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Removed text from section 5.1.2.1.1.Scott Rifenbark1
Removed several blocks of text from section 5.1.2.1.1 "Installing and Setting up the Eclipse IDE". This text according to Jessica was no longer needed.
2010-10-27Corrected the package command for Debian-based hosts.Scott Rifenbark1
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev. Also added the package mercurial. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Added package installation requirements.Scott Rifenbark1
Added commands to support package installation of RPM-based host systems to the example. Input based on feedback from Dirk. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-inserted Poky Image as part of the front matter.Scott Rifenbark1
I have inserted the Poky image in the front matter again because the book is a Poky Guide. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation/poky-ref-manual: Fix image makefile to reference the imageRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Moved the Poky image file to the "Figures" folder.Scott Rifenbark1
The image file was in the same directory as the main reference manual files. So I moved the file into subdirectory "Figures" with other figures. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-installed the Poky Handbook image at the top of the manualScott Rifenbark1
I could not get the Yocto Project logo to appear correctly in the book after the title. I also decided that since Poky is by no means going away that this book should have that image associated with it as it is the Poky Reference Manual. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated the yocto-environment picture and added example command edits.Scott Rifenbark2
When scaled to fit the page the picture had a black vertical line artifact to the right. I snipped out the image a little tigher to eliminate this line. I also incorporated Dirk's comments tightening up the sequence of example commands to do the build. I incorporated Fedora 14 note and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27docmentation/yocto-project-qs: Fix Yocto Environment graphicRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Removed first link to openembedded and replaced with more general text.Scott Rifenbark1
The link to openembedded was used to reference Linux distributions supporting Yocto Project. The link has been removed and replaced with more generic text so as to not have to link to openembedded. Text used is "A Host system running a supported Linux distribution (i.e. recent releases of Fedora, OpenSUSE, Debian, and Ubuntu)." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated the first figure in the quick start.Scott Rifenbark1
This conceptual figure has been replaced by a more detailed work flow representing YP. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Corrected link to the yocto website.Scott Rifenbark1
This link was incorrect and has been changed to yoctoproject.com. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated supporting text to reflect new poky-4.0-build directory in exampleScott Rifenbark1
The example commands that build an image were updated to reflect the real 4.0 release. I updated the paragraph after the example commands to refer to the new release used in the command examples. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation-project-qs: Remove stray ]Richard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation/qs-guide: Fix urls for releaseRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Edits as described below:Scott Rifenbark1
1) Wording change based on Darren's input of making Linux kernel sound like the only open source part of YL 2) Removal of the "v" option for the tar command example. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Review changes applied.Scott Rifenbark1
1. Added Richard Purdie's general editing feedback to the "Welcome" and "Introducing the Yocto Project Development Environment" sections. 2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed the order of the sample "cd" and "source" commands since the "source" command builds the directory structure first so changing to the directory before running "source" made no sense, 3) removed the "bitbake qemu-native" command. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated figure.Scott Rifenbark1
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather than "Target." Also that the two inner boxes be "Set of Emulated Devices" and "Target CPU." Final change was the use of "Yocto Project Scripts" rather than "Yocto Linux Scripts." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated this figure to correctly capaitalize opkg, zyper, and app-getScott Rifenbark1
Feedback from Kevin Tian suggested "OPKG" should be lower-case. Also, use of "zypper" instead of "YUM." I also lower-cased "apt-get." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Removed reference to pre-build in section 5.3.2, "Using OprofileUI".Scott Rifenbark1
The "Using OprofileUI" section had a description of how to use a pre-built UI and how to download and build one. Feedback from Jessica Zhang suggested removing the instruction for using a pre-built UI. All that remains in the first paragraph now is instruction on how to download and build the UI. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Added the Anjuta Plug-in informationScott Rifenbark1
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual. This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using the Anjuta Plug-in". This information was in the original Poky Handbook but had been removed by me since I thought it was not going to be supported for the 0.9 Yocto Release. It has now been restored with a note indicating that Anjuta will not be supported post 0.9 release. I did some general text editing in each section for readability. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation/pokt-ref-manual: Update with Yocto brandingRichard Purdie9
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation: Add Yocto quickstart guideRichard Purdie10
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-23rm_work.bbclass: Handle case where pseudo directory doesn't existRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-23bitbake/fetch: When fetchers return errors, ensure any partial download is ↵Richard Purdie1
cleared Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22package_deb: The packaging command itself is run under fakeroot so these ↵Richard Purdie1
lines are totally unneeded Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22Fix adding new contact failure when starting contacts for the 1st timeZhai Edwin2
When contacts called for the 1st time, adding new contact always failed but worked after restart. The reason is e-addressbook-factory used to handle addressbook leads a segmentation fault. Root cause is that factory would create the data base if not exist, but use it without proper initialization. [BUGID #455] got fixed by this. Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
2010-10-22classes: Only enable fakeroot on setscene tasks with packagingRichard Purdie5
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22bitbake/fetch: Make URL checking slightly less verbose (distracting with the ↵Richard Purdie1
sstate code) Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22sstate: Fix mirror handling for file:// urlsRichard Purdie1
The fetcher has special handling for file:// mirror urls, being efficient and just providing an updated path. Unfortunately the sstate fetching code wasn't able to handle this. This patch detects this and injects a symlink to ensure everything works. It also fixes some datastore references to be correct and ensures the sstate download directory exists if it doesn't already. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22documentation/bsp: update to reference FILESEXTRAPATHSJoshua Lock1
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend recipe. Should you need to reference extra files you should use FILESEXTRAPATHS Signed-off-by: Joshua Lock <josh@linux.intel.com>
2010-10-22pseudo/fakeroot: Move the pseudo directory creation into bitbakeRichard Purdie7
If sstate was used to accelerate a build, the pseudo directory might not have been created leading to subsequent task failures. Also, sstate packages were not being installed under pseudo context meaning file permissions could have been lost. Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures exists before running tasks and running the appropriate setscene tasks under fakeroot context. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22package_deb: Fix a typo meaning the debian packaging was not running in the ↵Richard Purdie1
fakeroot evnironment Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22package_rpm: Don't check for the existence of dvar as its never usedRichard Purdie1
If a sstate package exists for the package task but not for the rpm packaging task, the output from the package task will be used. The directory pointed to by dvar will not exist under this scenario. Since the directory is never used by the packaging process remove the check, substituting the pkgd variable which is always present and used. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22base.bbclass: Ensure an empty do_build tasks exists to silence a warningRichard Purdie1
The message "WARNING: Function do_build doesn't exist" doesn't look professional, so fix the underlying problem even if this warning is harmless. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22sstate: Fix broken plaindirs supportRichard Purdie1
When installing a sstate package, directories tracked by plaindirs were being installed to the incorrect location. With the current implementation this was limited to the do_package task. This patch ensures plaindirs tracked files are created in the correct location, fixing the bug where these files would go missing. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-22at: Fix nonstripbinaries.patchMark Hatle1
The commit '0e0d14ed1e88ebff876abb3d00b08627a3879e8d' introduced a new patch nonstripbinaries.patch, the filename format caused the patch to not apply. Simple fix made by correcting the path. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-10-22libtheora: add DEPENDS on liboggDexuan Cui1
This is used to fix the following build failure: checking for oggpackB_read... no | configure: error: newer libogg version (1.1 or later) required Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
2010-10-22base/sstate: Add cleanall task to remove downloads and sstate cached filesRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-21local.conf.sample: Default to not building 32 bit libs on 64 bit systems as ↵Richard Purdie1
most people don't need it and it confuses them Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-21metadata_scm: Ensure that if an SCM isn't present, we dont print a revision ↵Richard Purdie1
of 'fatal:' as it looks bad Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-21busybox/sysklogd: syslog.conf filesMark Hatle4
The format of the syslog.conf files is different between busybox and sysklogd. Use the alternatives method to ensure we get the correct config file for any specific configurations. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-10-21gst-ffmpeg: powerpc build errorsBruce Ashfield1
Fixes [BUGID #501] While building the poky-image-sato target, gst-ffmpeg failed when it attempted to run altivec tests on the host. We can live without this optimization, so the easiest fix is to simply disable it. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2010-10-21mpc8315e-rdb: align PACKAGE_EXTRA_ARCHS with tuningBruce Ashfield1
Fixes [BUGID #500] While the tuning for the mpc8315e is 603e, the PACKAGE_EXTRA_ARCHES was ppce300. This created a mismatch and resulted in rootfs assembly issues due to missing locales. We align both at 603 and can revist a better tuning in the future. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2010-10-21at: remove nonrootinstall patch and modify some relevant filesMei Lei3
remove nonrootinstall patch, and use a patch named nonstripbinaries to modi fy the /at-3.1.10.2/Makefile.in, so it can also handles stripping of the bi naries Fix [BUG 246] Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-10-20gnome-icon-theme: fix buildJoshua Lock2
Duplicate the patch from sato-icon-theme which enables the path to the icon-name-mapping tool to be specified. Signed-off-by: Joshua Lock <josh@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 00:51:55 +0000