| Age | Commit message (Collapse) | Author | Files |
|---|
|
This reverts commit 43150ab7ec63d804e8a998ecee9d00295b8b2bc7.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It turns out that dd's conv=sparse doesn't look at the file extents, but simply
checks if a "block" is all zero. If the block of zero was meaningful it gets
lost and if the image is subsequently written to media using a sparse-aware
writer then the block of zeros won't be written at all.
This reverts commit 5fd592fbae2e046bcb8c3a6c3ef4993fe0400676.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, do_archive_sources will fail for the gcc tasks where there is
common source and the other tasks are not added as dependencies. The failure
happens when trying to restore these tasks from sstate.
To fix this ensure the sources directory is created as expected by the
sstate code.
[YOCTO #9433]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It only works with qemux86, but mismatched qemux86-64 which caused
runtime errros. (kernel is bigger, can't boot, no output, and so on).
Add '$' in the end to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit cc97d576 moved a bunch of development tools to the -dev
package. glib-compile-schemas is actually used in postinst by
gsettings.bbclass so it needs to be available on target at package
install time: Move the tool back to glib-2.0-utils which
gsettings.bbclass depends on.
Fixes [YOCTO #9431].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the changes introduced to test the eSDK
the runexported test failed during the execution.
This change fix runexported test in the least invasive
way, because of the release cycle.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As more variables were being added it made sense to split this test into two:
one quick test that verifies that the host being 32-bit or 64-bit doesn't impact
the hashes, and another which compares stamps for two builds with several
variables changed and classes inherited.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously util-linux had a lower priority for hwclock than busybox but the
reasoning was lost in the mists of time, with just this enigmatic comment
remaining:
There seems to be problem, atleast on nslu2, with these, until they are
fixed the busybox ones have higher priority.
Chasing the comment back through history it first appeared in the following
oe-classic commit:
commit 5e01906b8433bc6a8c03be2e31758589641124c9
Author: David Karlstrom <daka@thg.se>
Date: Sat Jul 23 13:36:38 2005 +0000
Updated to use update-alternatives and fix some FHS bugs
Which doesn't really give a lot away.
Let's assume that in the past eleven years both hwclock and hardware have
improved, and restore util-linux's hwclock to it's intended priority.
[ YOCTO #9103 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ac_cv_sizeof_off_t was previously in the site cache files, which was breaking
large file support and required a workaround in each recipe that actually wanted
to use large files.
Now that the entry has been removed from the site cache, we can remove the
workarounds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The size of off_t depends on whether large file support is enabled through
preprocessor flags, so we can't cache this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the dependencies injected by this class for recipes in ASSUME_PROVIDED
e.g. tar-native or chrpath-native are ignored. We need to use their "replacement"
names, e.g. tar-replacement-native.
This avoids broken archives and sstate failures with these recipes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise the task hash changes between server and worker context
leading to changing task checksums.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for VirtualBox guest additions.
The additions are built inside the Build Appliance VM.
For this to be possible, the environment for out-of-tree kernel module builds
must be present and set up properly.
A README file with detailed steps on how to build the guest additions is placed
in the home directory of the user "builder" as well.
The main purpose of the guest additions is to allow sharing folders between
the host and Build Appliance VM.
[YOCTO #8073]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It should be possible to override EXTRA_IMAGE_FEATURES in auto.conf,
which is read before local.conf.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a testcase to build a directdisk image and check that the
used disk size is less than the apparent size, as wic now
assembles images as sparse files.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The individual partitions created by wic are sparse but without
this change the assembled image is written as one (potentially
very) large file.
Preserve sparseness in the assembled image by passing the sparse
conversion symbol.
[YOCTO #9099]
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we create hdddirect in the first time, and run bitbake to create
vmimg in the second time, then the previouse created
${IMAGE_LINK_NAME}.hdddirect may can not be found since it contains the
data string which are different. Use IMAGE_LINK_NAME to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
| DEBUG: Executing shell function do_image_elf
| Cannot open `/path/to/tmp/sysroots/qemux86-64/usr/src/kernel/bzImage': (null)
| WARNING: exit code 1 from a shell command.
The bzImage is in DEPLOY_DIR_IMAGE
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default value is 16K which is too big to create image for
core-image-minimal:
rootfs.btrfs is too small to make a usable filesystem
Minimum size for each btrfs device is 41943040.
Use 4K as ext2/3/4 to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code: suppose $1 == 2.7:
verdep=ifelse([$1], [], [], [>= $1])
results in:
verdep=>= 2.7
This is wrong in shell:
bash: 2.7: command not found
Use quotation marks to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Many user/group operations will involve hashes which will include '$'
followed by a number or even possibly an env. variable name. Passing
$opts to flock requires that we take additional precautions to prevent
the unexpected expansion of these instances.
This was found by an image which used usermod operations to set the
password hash for root. The image could not be logged-in to and
examining /etc/shadow clearly showed that $0 and other $* variables
had been expanded unexpectedly. This change returnes the behavior to
what existed prior to commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c
[useradd_base.bbclass: replace retry logic with flock].
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c [useradd_base.bbclass:
replace retry logic with flock] dropped the 3rd (retry) parameter for
these functions. These are simply being ignored now but we should
remove the retry count to avoid confusion.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The constuct rm *.{a,la} is a bashism and as tasks are run under /bin/sh this
may not work as expected. Expand the {a,la} to two separate calls, and remove
the architecture-specific macro deletion as they are not installed in the first
place anymore.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libcrypto.so was explicitly added to FILES_${PN}-dev as part of moving
libcrypto from libdir -> base_libdir to support dhclient [1].
However, the line has been unnecessary since ${base_libdir}/lib*.so
files started to be included in FILES_${PN}-dev by default [2] (and
it's still unnecessary now, after moving libcrypto from back to libdir
to support ntp [3]).
[1] http://git.openembedded.org/openembedded-core/commit/?id=01ea85f7f6c53c66c76d6f832518b28bf06ec072
[2] http://git.openembedded.org/openembedded-core/commit/?id=66c36bcb7d9368718453265e58bd5e3c854c786a
[3] http://git.openembedded.org/openembedded-core/commit/?id=0be2ab32f690a2fcba0e821abe11460958bbc6dc
Also define FILES_libssl using SOLIBS instead of a hardcoded pattern.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The regexs were too strict and didn't allow for trailing whitespace.
[ YOCTO #9337 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when build nativesdk-apr-util:
| gawk: fatal: can't open source file `/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/build-1/make_exports.awk' for reading (No such file or directory)
The ${S} should be ${B}.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
ERROR: nativesdk-bdwgc-7.4.2-r0 do_package: QA Issue: nativesdk-bdwgc: Files/directories were installed but not shipped in any package:
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/porting.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcinterface.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcdescr.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/README.solaris2
[snip]
This was caused by hardcode of datadir.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
ERROR: nativesdk-libsolv-0.6.19-r0 do_package: QA Issue: nativesdk-libsolv: Files/directories were installed but not shipped in any package:
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-constantids.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-history.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-pool.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-bindings.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/mergesolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/testsolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/installcheck.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/dumpsolv.1
It checks ${CMAKE_INSTALL_PREFIX}/share/man when configure, but it may
not exist when crosscompile, for example, when CMAKE_INSTALL_PREFIX="/",
it is OK, but when CMAKE_INSTALL_PREFIX="/some/path/else", then it
doesn't exist, and the man dir would be set to "/usr/man" which is
incorrect.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when len(TMPDIR) == 410:
| ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
| /bin/bash: line 12: 903 Aborted emacs --batch $am__subdir_includes -L
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the DL_DIR and SSTATE_DIR to the toasterconf with defaults set
We now support per project sharing of the DL_DIR and SSTATE_DIR
in toaster.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current code in toaster_buildhistory_dump assumes that bitbake
target doesn't contain task name. It uses target as a part of
path to the files with data that it analizes. It fails to find
files if target contains task name. Stripping task from the
target should solve this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when "blank" is not in PACKAGECONFIG, explicitly set dpms and
screensaver off. The intention here is to make it easier to
create builds that should not blank the screen (just remove
"blank" from x11-common PACKAGECONFIG).
Also remove a unneeded "find -exec rm" from do_install.
Partly fixes [YOCTO #7278].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the user only builds iso + efi only, the syslinux-native which
provides isohybrid is required to build iso, so add syslinux-native to
DEPENDS.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chris Trobridge <christrobridge@hotmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a recipe is added to the workspace, the signatures for the tasks
will change. This means that bitbake must be told to allow the
signatures to be different if they are in locked-sigs.inc.
This is done by creating an unlocked-sigs.inc file which contains all
the recipes in the workspace each time devtool reads the workspace.
So not only will necessary things get added, previously added items will
be removed by virtue of them no longer being in the workspace.
This also makes sure that the extensible sdk picks up unlocked-sigs.inc
as part of the configuration.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to support workflows using devtool where a user might want to
modify tasks that exist in locked-sigs.inc, there must be a way to unlock
recipes.
This patch adds that support by allowing the user to add recipes to
SIGGEN_UNLOCKED_RECIPES. Recipes that exist in that variable will have
all their tasks unlocked, as well as any tasks that depend on that
recipe.
For example if foo->bar->baz, if you unlock baz, it will also unlock bar
so that foo can be rebuilt without explicitly specifying bar as being
unlocked.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the extensible sdk we want there to be an error if a task tries to
run without signatures that match locked-sigs.inc. This patch enables
that error.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous message when signatures didn't match between the metadata
and the locked signatures file, the message output was a bit confusing.
Now the message should be of the form:
The zlib-native:do_install sig is computed to be
53531910a2a7848432da89def942a91a, but the sig is locked to
d25ba9035f7ccb308e51bbe1066e8d27 in SIGGEN_LOCKEDSIGS_t-x86-64
which will hopefully be more useful in understanding the problem.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace
SIGGEN_LOCKEDSIGS_CHECK_LEVEL.
SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a
warning or error if a task's hash in the locked signature file doesn't match
the computed hash from the current metadata.
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a
warning or error if a task that supports sstate is in the locked
signature file, but no sstate exists for the task.
Previously you could only have warning/errors for both controlled by
SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk,
because we know sstate won't exist for certain items in the reverse
dependencies list for tasks. However, we still want to error if task
signatures don't match.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes it self-sufficient with OE-Core
Generate ext4 instead of ext3, most of Qemu
targets in oe-core now use ext4
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Existing compress framework for producing various compressed versions
of images is powerfull enough to be extended for other uses, e.g. to
convert types of images.
It is possible to use it also to produce image checksums at the time
of image generation. This commit adds support for all supported
at the moment coreutils hashing algorithms: md5, sha1, sha224,
sha256, sha384 and sha512
Usage:
IMAGE_FSTYPES_append = " hddimg.sha256sum"
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
NetworkManager can clobber tap devices if left alone, this gives a
note about how to set tap* as unmanaged
[YOCTO #8587]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lt_truncate_bin path is contaminated by the path from the sysroot
directory for the build host.
Steps to reproduce this issue:
$ bitbake -c cleanall libtool
$ bitbake coreutils-native
$ bitbake libtool
$ grep -in "lt_truncate_bin=" tmp/work/*/libtool/*/image/usr/bin/libtool
Signed-off-by: Alexandru Moise <alexandru.moise@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when git > 2.1.0:
$ ./scripts/create-pull-request -r HEAD^ -u contrib -b rbt/git
fatal: Not a valid revision: rbt/git
ERROR: git request-pull reported an error
This is because newer git requires both local and remote branch named as
rbt/git, but usually, we only named the remote branch as rbt/foo, and
foo for local branch.
Add a option '-l' to fix the problem, default is HEAD.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
