summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-03-01package_rpm.bbclass: name postinst files with package nameKang Kai1
When create rootfs, some post install scripts need be run on device. They are saved under directory /etc/rpm-postinst and named with numbers such as 100, 101 etc. Update to name the postinst script file with its package name instead of just number. That may be more easy to debug when there is a error. [YOCTO #3218] Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01perl-nativesdk:fix toolchain relocation issuesHongxu Jia1
1, Use create_wrapper to create perl wrapper in the SDK. 2, Add perl.real to perl-nativesdk package. [YOCTO #3338] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01populate_sdk_base.bbclass:fix toolchain relocation issuesHongxu Jia1
When run "autoreconf" in toolchain, there is an error if the host's perl's version is not the same as the one in the SDK, the error says that the executable perl mismatches the perl lib's version. This is because most of the autotools' scripts use the "#!/usr/bin/perl -w" which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to the SDK which causes the mismatch. We can make all the perl scripts to use the host perl or the SDK perl to fix this problem. [YOCTO #3338] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01matchbox-session-sato: do not rdepend on initscriptsChen Qi1
Previously, matchbox-session-sato depended on initscripts, thus resulting in initscripts package built and installed in case of systemd init manager. But there is actually no dependency between them. So this patch removes the dependency. [YOCTO #3940] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01shadow: remove grpconv argc checkMartin Donnelly1
The patched version of grpconv takes arguments but the check on argc was not removed. This patch removes this check which otherwise results in a spurious warning during rootfs creation. Signed-off-by: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01kernel.bbclass: Add missing modules.order and modules.builtinsMark Hatle1
When running depmod, from kmod, warnings about missing modules.order and modules.builtins occur. Looking back it is not clear why these files were being ignored, other then nobody knew what to do with them. Add the files into the kernel-base package, if they exist, ensuring they will always get installed if at least one module is installed. [ YOCTO #3963 ] Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01Update pseudo to 1.5.1Peter Seebach2
pseudo 1.5's enable-force-async works great, unless you use a host where, inexplicably, stat(2) reports inconsistent and changing values for a file's size or times for some time unless a file has been fsynced, in which case you might want a way to cause an fsync to work. Also noticed that some recent changes never made it into the docs, so I did a little cleanup there. And changed the way NDEBUG suppresses pseudo's debug messages, so arguments to them with possible side effects (like calls into functions in another translation unit) can be omitted, which should drastically reduce computational time if anyone ever uses NDEBUG. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01v86d: compile against userspace safe kernel headersBruce Ashfield1
v86d was building directly against the staged kernel in the target sysroot. This has been fine in the past, but with recent (3.7) changes to user headers into the "uapi" include structure, there are no longer Without the preprocesor protection, v86d fails to build against any kernel with uapi header files. v86d doesn't actually need the whole kernel tree, the exported headers are enough to build a working binary. This change sets the v86d variable to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the end of KDIR, we have a valid include path to the target sysroot headers. This also works for pre-uapi kernel headers, so the change is safe for most (if not all) kernel's with properly exported headers. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01linux-yocto/3.4: remove cedartrail machineBruce Ashfield3
The cedartrail BSP is no longer support from yocto 1.4, so we remove it from the tree. Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01kernel-yocto: allow building from fetcher source dirBruce Ashfield1
The linux-yocto recipes themselves always set S="${WORKDIR}/linux" and arrange for the fetcher default of ${WORKDIR}/git to be renamed before building. Part of this rename involves an assumption that the directory used by the fetcher can be removed as part of the renaming process, or in fact that renaming is required. If a derived recipe uses S="${WORKDIR}/git", the checkout phase fails since the kernel source is removed as part of the processing. To fix this the code now detects this situation and does not clean the source directory before renaming the fetcher default (and in fact does not rename it at all). Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01kernel-yocto: respect SRC_URI modified branch selectionBruce Ashfield1
Although the setting of KBRANCH is the suggested/primary way to interact with the yocto kern-tools and the fetcher, some users may be more comfortable modifying the SRC_URI branch parameter directly. If they do, the tools will not force their branch and build output will be different then they expect, in non obvious ways. It's easy enough to detect this scenario, but checking the SRC_URI in the same way that the git fetcher checks for the branch (and SRCREV). If we take the value from the SRC_URI and use it directly in the patch/validate/update routines, we'll stay consistent with KBRANCH if it is used, and also automatically adapt to a manually changed branch parameter on the SRC_URI. For all other users, there are no visible or behavioural changes as a result of this change Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01iproute2: don't use the kernel header treeSaul Wold1
This should compile against the userspace safe kernel headers Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01connman: add header to define in6_addrSaul Wold2
Needed because the 3.8 if_bridge.h uses in6_addr before it's defined Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01insane.bbclass: Merge linux-gnu entries in machine dictionary and add sh4 ↵Kyle Farnsworth1
machine. Signed-off-by: Kyle Farnsworth <kyle@farnsworthtech.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01rootfs_rpm: move run-postinsts scripts to rpm recipeKang Kai2
Move run-postinsts scripts from rootfs_rpm.bbclass to rpm recipe. That is the same way for dpkg and opkg to deal the post install scripts. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01systemd.bbclass: fix bb.errorMartin Jansa1
NOTE: recipe avahi-ui-0.6.31-r7.0: task do_package: Started ERROR: %s does not appear in package list, please add it avahi-ui-daemon ERROR: %s does not appear in package list, please add it avahi-ui-dnsconfd Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01systemd: systemd uses libkmod instead of modprobe, remove dependenciesRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-01rootfs_deb: remove run-postinsts from ROOTFS_PKGMANAGEKang Kai1
Remove package run-postinsts from ROOTFS_PKGMANAGE. run-postinsts has already added in ROOTFS_PKGMANAGE_BOOTSTRAP and then added to rootfs conditionally by checking image feature "package-management". Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28sudo : upgrade to 1.8.6p6Andrei Dinu1
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28gconf: update to 3.2.6Saul Wold3
remove automake patch as it been fixed upstream Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28minicom: upgrade to 2.6.2Cristian Iorga4
- all patches removed; - fixes already integrated in source code; - gcc4-scope.patch removed as was not enabled; Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28libassuan: upgrade to 2.1.0Constantin Musca2
- license checksum change due to addition of "Copyright (C) 2001, 2002, 2012, 2013 g10 Code GmbH" libassuan-add-pkgconfig-support.patch: adapted to the new version Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28kconfig-frontends: Update to 3.8Saul Wold1
Upstream changed numbering to remove '-', so extend PV to patch. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28resolvconf: Update to 1.70Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28file: Update to 5.13Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28lsbinitscripts: Update to 9.44Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28man-pages: Update to 3.47Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28boost: Update to 1.53.0Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28socat: Update to 1.7.2.1Saul Wold1
Changed LIC_FILES_CHKSUM due to whitespace and GNU address difference Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28nspr: Update to 4.9.5Saul Wold1
Changed LIC_FILES_CHKSUM line numebrs, no license change Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28qt4-embedded: Enable Linux Input supportOtavio Salvador1
This allow use of Linux Input directly so being able to use 'evdev' driver for keyboard use. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28binutils: Delete recipes for 2.22Khem Raj37
We have 2.23.1 as default now. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28binutils: Fix build with newer texinfo 5.0+Khem Raj4
[Yocto #3943] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28packagegroup-core-tools-testapps: connman-client addedCristian Iorga1
connman-client is now part of tools-testapps Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28mini-x-session: Fix starting of x-sessionSaul Wold2
We need to use sudo semantics since it does not start correctly with su. Added RDEPENDS to ensure it's present on target. The SESSION_DIR test was constructed incorrectly, so fixed it. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28sqlite: rename version to match upstream versioning changeSaul Wold1
Upstream changed to a single grouped number, change our numbering to match thiers. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28connman: enable connman clientCristian Iorga1
connmanctl is available in a new package: connman-client Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28parted: fix several integer overflowsMing Liu2
Integer overflows were found in libparted/labels/dvh.c, while attemptting to assign unsigned int values to int types in some places. These overflows only can be observed on BE platforms like MIPS, when the "WORDS_BIGENDIAN" macro is defined in parted. Defined by unsigned int instead. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28dbus: set correct address when using --address=systemd:Ross Burton2
Patch taken from upstream 1.7 branch. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28lsbtest: sync test suite packages versionKang Kai2
Update file packages_list after sync test suite packages version with upstream. Check date: Feb 20, 2103 Bump up PR. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28sstate-cache-management.sh: don't hardcode available sstate_suffixesHongxu Jia1
Don't hardcode available sstate_suffixes(it misses `packagedata'), find them dynamically in $sstate_list. [YOCTO #3635] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28sstate-cache-management.sh:fix the incorrect usage of option `-d'Hongxu Jia1
The description of option `-d' is not correct in useage. It is used to remove duplicate and debug at the same time. Use option `-D' to control debug info output and the option `-d' to flag remove duplicate. [YOCTO #3635] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28sstate-cache-management.sh: fix remove duplicate failed when multiple archsHongxu Jia1
The implementation of `--remove-duplicated' has been modified by the commit: http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=0740f82aea92da0195524e37c372f9981e7f5e6d In above commit, sstate cache files with multiple archs are not considered duplicate and don't need to be removed as duplicated any more. Update the description of `--remove-duplicated' in usage to keep consistent with implementation. [YOCTO #3635] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28distrodata: added some corner cases for svn and git reposEmilia Ciobanu1
distrodata.bbclass: git tags can include only one digit, therefore the regex that matches the latest version should also include this case. For some svn repos, using the http protocol than using the svn protocol to get infomation about revisions works better. Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28Add kernel arch variable in SDK environment variable list for supporting ↵Jessica Zhang1
build external kernel module using SDK Signed-off-by: Jessica Zhang <jessica.zhang@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28iproute2: upgraded to 3.8.0Cristian Iorga2
- cross-compiling patch adapted to new source code Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28dbus-glib : upgrade to 1.100.2Andrei Dinu5
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28e2fsprogs : upgrade to 1.42.7Andrei Dinu5
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28archive-*-source.bbclass: Handle all package classesMuhammad Shakeel3
* Add archiver tasks correctly for any 'IMAGE_PKGTYPE'. [YOCTO #3449] Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28archiver class: Use tasks with sstate instead of pre/post funcsMuhammad Shakeel4
* Add tasks to move sources, script/logs and diff/env files in deploy directory. * Enable SSTATE for 'do_archive_scripts_logs' task * Enable SSTATE for 'do_dumpdata_create_diff_gz' task * SSTATE is not used for sources/patches archiver task because source archive package can result into a very large file. It will be an unnecessary overhead to keep sources in DL_DIR and cached-binaries. * If 'SOURCE_ARCHIVE_PACKAGE_TYPE' is 'srpm' then use pre/post functions because in this case we do not want to use tasks to move sources/logs in DEPLOY_DIR. 'do_package_write_rpm' is responsible for handling archiver packages. [YOCTO #3449] Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 08:04:13 +0000