summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-04-08scripts/oe-pkgdata-util: find complementary packages for split packagesPaul Eggleton1
Check after getting the original package name (e.g. undoing Debian renaming) if there is a complementary package for that name, e.g. if the glob is *-dev, then libudev0 -> libudev -> libudev-dev. Fixes [YOCTO #4136]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08bluez4: add readline dependencyAlexandru DAMIAN1
bluez4 uses readline to be build, but the dependency is not listed This is listed in the configuration log. So we add it. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08systemd: Set the default firmware path to enable firmware loading in udevHolger Hans Peter Freyther2
After some breakage in udev the kernel gained direct firmware loading. For older kernels (e.g. 3.2 in my case) udev still needs to load the firmware. Firmware loading is enabled once a default firmware path is set. Apply a compile fix from the upstream project. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08tcf-agent: Use kill instead of killproc to stop agentIoana Grigoropol2
When shutting down a core-image-lsb-sdk image, there is a lot of time spend stopping tcf-agent, which slows down the whole process. The reason for this slowdown is the fact that it tries in a loop to kill tcf-agent service by using killproc with the path of the executable and killproc does not seem to available in lsb images. This patch fixes the issue by using "kill" instead of "killproc". [Yocto #3928] Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com> Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08smart: disable CHANNELSDIRBogdan Marinescu2
Make CHANNELSDIR in smart empty, since this causes host contamination issues on some RPM-based hosts on which smart is already installed. [YOCTO #3881] Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08gtk-update-icon-cache-native: create wrapper scriptLaurentiu Palcu1
When using the sstate from another build machine, the path to the pixbuf loader's cache points to a path on the remote machine. Hence, the update of the icon cache fails on host. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08image.bbclass: fix postinstall intercepts fallbackLaurentiu Palcu1
The wrong type of paranthesis was used so 'continue' did nothing (was in another context) and the packages were marked as installed. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08gst-ffmpeg: fix --disable-yasmTom Zanussi1
The gst-ffmpeg build shows the following warning: configure: WARNING: unrecognized options: --disable-yasm which means that the following test in configure always fails and --disable-yasm never gets passed to the embedded ffmpeg build: 'if test "x$disable_yasm" = "xyes"; then' embffmpeg_configure_args="$embffmpeg_configure_args --disable-yasm" commit 4d309730 ['gst-ffmpeg: configure-fix patch used wrong test'] actually fixed the obviously backwards syntax by reversing the test - prior to that, --disable-yasm would always unconditionally be passed into the embedded ffmpeg config. This fixes things so that the variable actually exists and makes the test meaningful. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-08insane.bbclass: Updated MicroBlaze machine definitionsNathan Rossi1
* Removed existing definition with machine 47787, this definition is outdated, a sanity error should occur if an ELF uses this value. * Added new definition with machine 189. This value replaces the existing value since August 2009. See binutils thread for more information. (http://sourceware.org/ml/binutils/2009-08/msg00127.html) Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-06qemuimage-tests/sanity/boot: Increase timeoutRichard Purdie1
As we've increased the parallelisation on the build servers, we've started to see core-image-minimal sanity test boot failures where the network never comes up. We don't see those failures for core-image-sato, its always minimal. Looking at the results, it can take ~100 seconds for the network to come up, even on the sato images if the machine has a high load. The timeout for the boot test is only 120 seconds compared to 400 on every other test. This change makes the timeout equal for all the tests at 400 seconds in the hope that the load on the autobuilder is causing the sanity tests to run slowly and hence triggering the false negatives. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05oe-init-build-env: Make it use the correct $OEROOT with zshPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <pkj@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05oe-setup-builddir: Allow $OECORENOTESCONF to not existPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <pkj@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05curl: backport patch to fix segfaultsMartin Jansa2
* e.g. ecore, efreet segfault a lot without this patch Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05linux-yocto-tiny: Add 3.8.4 recipeDarren Hart1
Bring linux-yocto-tiny up to the latest linux-yocto 3.8.4 version. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05local.conf.sample: Add info about -ptest package groupMaxin B. John1
Add information about ptest package testing in local.conf.sample file. Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05linux-firmware: make the main package depend on all sub-packagesRoss Burton1
Whilst splitting out specific large firmware blobs is a good move for space saving, it makes installing "all the firmware" tricky. Make linux-firmware depend on all of the separated packages so that installing that pulls in all of the sub-packages. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05shadow: add patch to fix crypt: Invalid ArgumentSaul Wold2
This patch came from Slackware and address a change in crypt()'s handling of an invalid seed, which in the past returned an encrypted string and now returns a NULL. [YOCTO #4097] related to tinylogin segfault Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05tinylogin: fix segfault from crypt()Saul Wold2
In glibc 2.17, crypt() now expects 2 valid chars for the seed or it will error out and return a NULL. The tinylogin code took the result from crypt directly into a strcmp() which caused a segfault Tinylogin has been deperacted, busybox now has login support, I will investigate using busybox login support for 1.5. [YOCTO #4097] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05sanity/connman: when connman test fails, dump syslogRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05qemuimage-testlib: add function to fetch the remote syslogRoss Burton1
Add a new function to scp from the target, and another to fetch /var/log/messages and dump it to the console. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05qemuimage-testlib: silence some key warningsRoss Burton1
Set StrictHostKeyChecking to no to silence the fingerprint warnings, and instead of creating a temporary file for the known hosts and then deleting it just use /dev/null. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05connman_test.sh: show all processes when dumping psRoss Burton1
We know the grep failed because the error case is being executed, so don't do the grep again when attempting to help diagnose the problem, as seeing the full process list might be useful. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05lib/oe/classextend.py: avoid extending any kernel packagePaul Eggleton1
For multilib and other uses of classextend, we don't want any dependencies on kernel packages to be extended since there should only be one kernel variant. Fixes [YOCTO #2918] (where kernel-dev was being extended.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05postinst-intercepts, qemu.bbclass: fix issue on 32 bit hostsLaurentiu Palcu3
The intercept scripts fail to run on 32 bit hosts. Apparently, the current approach worked on 64 bit hosts due to the larger virtual address space (probably). On 32 bit hosts, however, calling the target binary like: qemu-arm ld-linux.so --library-path /lib:/usr/lib arm_binary fails with: arm_binary: error while loading shared libraries: arm_binary: failed to map segment from shared object: Operation not permitted When run like this, qemu-arm fails to map the arm_binary executable in memory because it's hitting the lower limit of /proc/sys/vm/mmap_min_addr. That's because it loads the ld-linux.so binary successfully, taking into account mmap_min_addr, runs it, and then ld-linux.so will map the arm_binary at a fixed address but this will fail because it is below mmap_min_addr. The qemu's guest base probing, apparently, doesn't work fine when a program runs inside other. One way around this would be to set mmap_min_addr to 0 (on recent distributions is set to 65536 to avoid "kernel NULL pointer dereference" defects) but this approach is not safe. The other way is to call the binary directly but providing qemu with a prefix (-L option) in order to find the elf interpreter correctly. This way, both the target binary and dynamic loader are mapped into memory under qemu's control and, only after, the dynamic loader is started. [YOCTO #4179] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05site/common-uclibc: add predefined configure vars for coreutilsHenning Heinold1
* this sets some configure vars which will be guessed false in cross-compile case for uclibc Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05qemuimage-testlib-pythonhelper: Fix process mixupsRichard Purdie1
runqemu-internal runs "ldd qemu-system xxx" and the detection code was returning this as the PID of qemu. This patch improves the detection code to avoid this problem, fixing certain race type failures on the autobuilder. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05scripts/sstate-cache-management.sh: fix return value by adding exit 0Henning Heinold1
* usefull for jenkins jobs, which will otherwise fail because 1 was returned Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04site: add endianness information for libmemcachedMarcin Juszkiewicz2
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04dbus: set INHIBIT_UPDATERCD_BBCLASS without sysvinit in featuresMartin Jansa1
* fixes udev configure in run-postinsts failing with: update-rc.d: /etc/init.d/dbus-1: file does not exist because dbus-udev is installed only with sysvinit in features but update-rc.d was always called from PN postinst Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04systemd: set INHIBIT_UPDATERCD_BBCLASS without sysvinit in featuresMartin Jansa1
* fixes udev configure in run-postinsts failing with: update-rc.d: /etc/init.d/systemd-udev: file does not exist because systemd-udev is installed only with sysvinit in features but update-rc.d was always called from PN postinst Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04utils: add helper to get all non-system packagesRoss Burton2
For example if PACKAGES is "foo foo-data foo-dev foo-doc", this will return "foo-data". Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04oe.terminal: add tmux classesChristopher Larson1
This adds two new Terminal classes. It's separated into two, so that opening a split inside a tmux window is preferred to the other terminal types, but opening a tmux session is prioritized only slightly higher than screen. - tmuxrunning: Open a new pane in the current running tmux window. Requires that the TMUX variable be added to the env whitelist to use it. - tmux: Open a new tmux session Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04liberation-fonts: remove 1.06Ross Burton1
1.06 requires fontforge-native to build, which as we don't have this version has never been used. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04libxcb: remove obsolete version 1.1.91Ross Burton1
We have 1.9 and git snapshot recipes, we don't also need this ancient version. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04scripts/qemuimage-testlib: Dump extra info if the network doesn't come upRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04Add file information to package information windowAndrei Dinu2
Removed the package files parsing routine from the packageinfo.bbclass file and added it to the package.bbclass file. Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04linux-dtb: fix whitespace in bash functionsChase Maupin1
* Fix the whitespace in the base functions to use TAB instead of spaces. This is to address feedback from: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04linux-dtb: Add simple DTB symlinks for devicetreeChase Maupin1
* This is similar to the symlinks provided for the kernel image in the /boot directory of a file system. The goal is to have simply named symlinks in /boot that mirror the device tree name in the kernel sources. This is so that programs like U-Boot can easily find the default device tree binary in the /boot directory and use that when booting the kernel. * Use update-alternatives to handle proper creation and removal of the symlinks. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04pointercal: Move override files from 'files' to 'pointercal' directoryOtavio Salvador9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04gcc: add patch to disable texinfo when texinfo is 5.0 or newerMartin Jansa2
* this is needed only for 4.7 series, newer works fine with texinfo-5* [YOCTO #3947] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04qemu: Add 2 patches to fix build with texinfo-5Martin Jansa3
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04qemu: Enabled SDL when compiling for target architectureMihai Prica1
Enables qemu to run images with video output without the need for vncviewer. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04python: adding missing runtime dependency python-io to python-pprintLukas Bulwahn2
When trying to import python-pprint on a minimal image, it reports that the cStringIO python module is missing. This is provided with python-io, so we add python-io as runtime dependency. The complete observed trace was: Python 2.7.3 (default, Apr 4 2013, 07:45:36) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pprint Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/pprint.py", line 40, in <module> from cStringIO import StringIO as _StringIO ImportError: No module named cStringIO Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04libproxy: add dependency on glib-2.0Alexandru DAMIAN1
libproxy uses glib-2.0, but the depends is missing Fixes intermittent build errors. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04rpm-postinsts: Split out run-postinstsSaul Wold2
This patch allows for the run-postinsts script to be provided outside of the rpm package itself and not pull in all the associated build dependencies. [YOCTO 4175] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04gst-ffmpeg: configure-fix patch used wrong testCarlos Rafael Giani1
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04icon-naming-utils: import version 0.8.90 from meta-oePaul Eggleton1
* Use newer version 0.8.90 * Updates to a BBCLASSEXTENDed recipe instead of just a native recipe * Use PV in SRC_URI instead of hardcoded version number In copying over the recipe from meta-oe, some minor changes were made: * Preserve the existing OE-Core nativeperl wrapper usage * Drop setting of S which is effectively the default value Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04xserver-nodm-init: Add xuser to input groupDarren Hart2
Fixes [YOCTO 4164](3/3) Input devices come and go, so a single chmod in this init script is not adequate to ensure rootless X servers can use input devices. The o+rw method also introduces a security hole. The newly added input group and input udev rule address this in a secure way. Ensure the xuser is added to the input group. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Saul Wold <sgw@linux.intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04udev-extraconf: Add rule adding input devices to input groupDarren Hart2
Fixes [YOCTO 4164](2/3) Add all /dev/input/* devices to the input group with g+rw. This is needed for rootless X without adding a security hole by making the device o+rw. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Saul Wold <sgw@linux.intel.com> Cc: Radu Moisan <radu.moisan@intel.com> Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04base-passwd: Add input groupDarren Hart2
Fixes [YOCTO 4164](1/3) Add input group for the /dev/input/* devices. This is needed for rootless X without adding a security hole by making the device o+rw. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Saul Wold <sgw@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 00:26:01 +0000