| Age | Commit message (Collapse) | Author | Files |
|---|
|
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fix the path for "define %pkg-config-program" in guile-config
* clean the --sysroot in guile-snarf
* add RDEPENDS on pkgconfig
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc 5 defaults to C11 rules about "extern inline": this breaks
any code that includes gmp.h header from gmp 4.2.1 with 'multiple
definition' errors.
disable-stdc patch is no longer required because of this.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 0600 modes were coming from fopen/freopen/etc., because those
don't specify a filesystem mode (just an access mode like "r" or
"w"). Use 0666 & ~umask. (And then the PSEUDO_FS_MODE macro masks
in the 0600 bits we want to be sure are present.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Starting logging thread message is also executed on run() inside
LoggingThread class.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LoggingThread is used for receive console output from QEMU
over TCP, so add filter to only wake poll on read events,
also change the event mask variable name to be more descriptive.
This fixes HIGH CPU consume caused by wake on ready to write
events.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Make image optional for the extensible SDK (auto-determine it based on
the targets the SDK was built for)
* Check that specified recipe is in fact an image
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user is running "devtool build-image" within the extensible SDK
then they probably won't know where to find the resulting output files,
so we should tell them explicitly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We build recipes and include packages into the image, adjust the
terminology used in code and messages accordingly. Also fix a few typos.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we end up printing a message about the build directory being the same
as the source, we should print that first and then print the message
about the recipe file possibly needing to be edited to the end so that
it has slightly more impact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't extract any source (for example, opkg-keyrings). We
were producing a traceback in this case because we weren't checking if
the directory existed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes that use work-shared (such as libgcc) are capable of unpacking
the source, but it doesn't necessarily unpack to ${WORKDIR}/${BP}. Use
the last part of the actual S value instead which is more likely to
work.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unpack task
If you try to use "devtool modify -x" or "devtool extract" on a recipe
where do_unpack has been set as noexec (e.g. glibc-locale), then we get
an error because the expected source wasn't ever unpacked. Do a check up
front for noexec being set on do_unpack and error out with a reasonable
message if that's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The # character in a URI denotes a fragment; we don't care about this
since it is never supposed to be sent to the server, so remove it from
the URI before actually trying to fetch it or use it in SRC_URI within
the recipe.
(This has come up because download links on pypi.python.org seem to have
a fragment containing the md5sum of the download; without stripping this
off the fetcher will choke on it.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a script to run "devtool modify" followed by a build on every target
recipe in the environment (with the option to skip/resume from/only
include specific recipes). This takes far too long to run as an
oe-selftest test but is still something that is useful to be able to
run. There's also a slightly quicker mode that just runs "devtool
extract" on each recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Unfortunately it appears that under certain circumstances, a failed
git am followed by git am --abort won't clean up any changes the patch
might have made - this was seen when running "devtool extract" on the
unzip recipe; unzip-6.0_overflow3.diff has a malformed date as far as
git am is concerned but it triggers this condition. Add a
git reset --hard HEAD followed by git clean -f in order to recover from
this scenario.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The value of the deps varflag for tasks is (unusually) expected to be a
list object rather than a space-separated string, hence we cannot use
appendVarFlag() here. This fixes a traceback when parsing the gcc recipe
with externalsrc enabled, for example.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It turns out that there are folks out there who use externalsrc in
normal builds and don't really need to be warned; additionally within
the extensible SDK or when using devtool, it shouldn't be a warning
situation. Thus, scale it back to a note (we can't use bb.note() here
since that wouldn't actually be piped through to the bitbake UI). Also
touch up the message a little bit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tar has supported a --checkpoint option since version 1.15.91, so it
should be safe to use here to print dots showing that it's still doing
something (technically it's not really progress unless you know how many
dots it's going to print, which even it doesn't know at the start, but
it's better than nothing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide the ability to define a function containing extra configuration
values to be added to the local.conf file that goes into the SDK. For
example, this could be used to set up SSTATE_MIRRORS within the SDK.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
installer with sh
If you ran the extensible SDK installer file with sh (instead of bash),
then the additional call to buildtools environment setup, extension of
PATH to support running devtool, and setting of OE_SKIP_SDK_CHECK
weren't being added to the end of the script. This is because apparently
bash is happy to expand wildcards in the target of a redirection, but
bash running in POSIX sh mode won't (although it apparently does work on
the sh command line rather than within a script run as an argument to
sh). In any case using a wildcard here is a bit of a crutch which we
don't need, so replace it with the proper path to the environment setup
script.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Variables such as SRC_URI which are space-separated may also contain
Python expressions (${@...}) which themselves contain spaces that
shouldn't be split when splitting the value into items. In order to
ensure this we need to use a custom splitting function instead of just
string.split().
This issue could be seen when doing "devtool modify sudo", adding a
commit to the resulting source repository then "devtool update-recipe" -
the Python expression in SRC_URI was being unnecessarily broken onto
multiple lines.
Fixes [YOCTO #8046].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Setting the SRCREVs to import the following changes in the
4.1 kernel tree:
79a31b9d23db hid-core: Avoid uninitialized buffer access
121593d3a0a4 aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined
efa7952a190f Bluetooth: Delay check for conn->smp in smp_conn_security()
69428ec43bd9 cc2520: set the default fifo pin value from platform data
ee0ddf37f3d6 fs/yaffs2: Fix a judgement logic for ACL operations
fff29e47f5c4 yaffs2: remove read and write methods
b3b9d030ad84 yaffs2: replace f_dentry to f_path.dentry
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes b6e64de541b37 "Restore compatibility with previous UBI filesystems"
The multivolume UBI code creates symlinks for each volume. If the volume name
is empty, it will create a symlink that the rootfs code will attempt to
create again later, resulting in a crash like this (unless IMAGE_LINK_NAME
is blank):
ERROR: Error executing a python function in .../recipes-core/images/my-image.bb:
File: '.../oe-core/meta/lib/oe/image.py', lineno: 203, function: _create_symlinks
*** 0203: os.symlink(src, dst)
Exception: OSError: [Errno 17] File exists
To prevent this from happening, only create symlinks to volumes that have
a name, and let the rootfs script create the default symlink later.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed unused imports: unittest, logging, pexpect
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a patch which adds a configuration for the nios2 processor.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The FE_DIVBYZERO is missing on nios2 , add a small patch to pixman
which checks for the presence of FE_DIVBYZERO and disables the test
which depends on it.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add patch to fix excessive greediness of OS/2 check in libtool.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make nios2 kernel depend on libgcc.
In arch/nios2/Makefile, it adds LIBGCC to libs-y:
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
libs-y += $(LIBGCC)
In file Makefile in top directory, libs-y is assigned to to var
KBUILD_VMLINUX_MAIN. It uses script link-vmlinux.sh to link vmlinux.o,
and when execute function vmlinux_link() in link-vmlinux.sh,
KBUILD_VMLINUX_MAIN is passed to ${LD}.
If build without libgcc, the value of LIBGCC is just libgcc.a without
parent directory. linux-yocto fails to build:
| LD vmlinux.o
| nios2-poky-linux-ld.bfd: cannot find libgcc.a: No such file or directory
Add libgcc to nios2 kernel dependency.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add nios2 target to valid arch list definition.
Based on previous work by Walter Goossens <waltergoossens@home.nl>
at https://github.com/wgoossens/meta-nios2 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add nios2-linux info, pulled from OE-Classic [1] as of commit
fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649 .
[1] https://github.com/openembedded/openembedded.git
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support information for the Altera NIOS-II soft processor.
Based on previous work by Walter Goossens <waltergoossens@home.nl>
at https://github.com/wgoossens/meta-nios2 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The logic is supposed to avoid following dependencies when we depend on
a target recipe which depends on a native recipe. The problem is, we were
marking the dep (the native recipe) as already processed when we avoided
traversal, meaning that even when that recipe would be pulled in via
a different dependency, we skipped it there too, and whether it was skipped
entirely depended on the non-deterministic dep processing order. If the first
one to be encountered was via the indirect target dep, it wouldn't end up in
configuredeps, otherwise it would.
As we want to avoid traversing that particular dependency relationship, not
*every* dependency on the native, we should continue, but not add it to done,
so it can be traversed from other avenues.
This fixes an intermittent bug in some of my non-GPLv3 builds, where one
dependency upon gettext-minimal-native was skipped, but others should not have
been, resulting in it being removed from configuredeps entirely, and no
gettext macros being available.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger fails to be invoked to debug other scripts complaining about
not being able to import pkutil, this patch adds pkgutil as a dependency for python3-debugger
fixing the issue.
[YOCTO #8334]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger (pdb) needs importlib as a dependency, if not included
it produces an error when importing pdb, making pdb unusable, this patch
adds importlib dependency fixing the issue.
{YOCT0 #8333]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The libglu requires both opengl (depends on virtual/libgl) and x11
(needs libGL.so which is provided by mesa when x11 in DISTRO_FEATURES),
so let libsdl depends on libglu when both x11 and opengl in
DISTRO_FEATURES.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Get upstream patch from lttng-tools github:
<https://github.com/lttng/lttng-tools>
<commit:700c5a9d4dc7b552926b8ddcbba91cc13312aba0>,
for solving the filtered tracepoint disabling error.
The use of a simple lookup and match on event name is insufficient
to identify the corresponding ust app event.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
