summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-08-16populate-volatile.sh: use $ROOT_DIR/var/volatile/tmp as TMPDIRChen Qi1
It's possible that a 'No such directory' error occurs when doing check_requirement in populate-volatile.sh at rootfs time. This is because the $ROOT_DIR/var/tmp might be a dead link. Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this error. [YOCTO #4883] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16udev: remove implicit dependency on initscriptsChen Qi1
At some point, the udev was modified to source the functions from initscripts or lsbinitscripts. This dependency is actually not needed. If we use udev in a system where initscripts from oe-core is not available, there will be errors. This patch fixes this problem by removing the implicit dependency. [YOCTO #4882] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16init-live.sh: make $ROOT_MOUNT/media writable when necessaryChen Qi1
If the live image is mounted as read-only, we cannot make necessary directories under $ROOT_MOUNT/media, so trying to move the mount points lead to errors. So in case that no unification filesystem mechanism is available in kernel and the rootfs is mounted as read-only, we mount tmpfs on $ROOT_MOUNT/media so that it's possible to make necessary directories under it. [YOCTO #4881] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16device_table-minimal.txt: use user/group names instead of uid/gidChen Qi1
Instead of hard coding the uid/gid, we prefer the way of using user/group names. Note the way of using uid/gid is still supported. [YOCTO #1159] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16image.bbclass: create device table after package installationChen Qi1
Now that the makedevs supports using user/group names in the devcie table files, and it uses passwd and group files under the rootfs which is provided by the base-passwd package, we should let package installation finish first, so that makedevs can get a correct mapping from user/group names to uid/gid. The check for existence of ${IMAGE_ROOTFS}/dev is removed. This is because do_rootfs doesn't have 'nostamp' flag any more, so the do_rootfs task will not be rerun for every build. Checking for the existence of ${IMAGE_ROOTFS}/dev is not necessary any more. Besides, as base-files package also installs the /dev directory, this checking does not serve as a good criteria. [YOCTO #1159] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16makedevs: support using user/group names in device table filesChen Qi1
Compared to hard coding the numeric group and user ids in the device table files, the way of using user/group names is preferred. This patch adds the ability to makedevs to correctly deal with device table files with user/group names in them. To maintain backward compatibility, the way of using uid/gid is still supported. [YOCTO #1159] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16wipe-sysroots: don't assume TMPDIR is under BUILDDIRRoss Burton1
The previous code used the environment variable BUILDDIR and assumed that TMPDIR was a subdirectory. This often isn't the case, so instead ask bitbake where the directories we're about to delete are. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16qemu, default-providers: Add mesa as default virtual/eglMartin Jansa2
* it's safer to select it consistently with virtual/libgl* providers Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16cmake.bbclass: Don't use packages from the native build machineStefan Herbrechtsmeier1
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16matchbox-wm: fix icon handling on 64-bit hostsRoss Burton1
Xlib has a historical quirk where 32-bit values are returned in longs (but always hidden through a cast). On 32-bit machines this doesn't matter but on 64-bit this leads to problems. Bump SRCREV to integrate a fix from upstream. Also, drop the conditional configure_fix.patch, it was integrated long ago. [ YOCTO #4917 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16libmatchbox: upgrade to 1.11Ross Burton2
Remove check.m4 as libmatchbox uses the check.pc instead of a m4 file now. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16xrestop: add dependency on ncursesMartin Jansa1
* fails without it | xrestop.c:50:20: fatal error: curses.h: No such file or directory | #include <curses.h> | ^ | compilation terminated. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16xeyes: add dependency on libxrenderMartin Jansa1
* fails without: | configure:10604: error: Package requirements (xrender >= 0.4) were not met: | No package 'xrender' found Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16gst-plugins-gl: add dependency on glewMartin Jansa1
* fails without: | ./gstglshader.h:30:21: fatal error: GL/glew.h: No such file or directory Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16at-spi2-core: add intltool-native dependencyMartin Jansa1
* configure fails without it at-spi2-core/2.8.0-r0/temp/run.do_configure.372: intltoolize: not found Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16nfs-utils: Replace spaces with tabs in shell functionMuhammad Shakeel1
As per OE-Core convention, indentation should be TAB for shell. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16rpcbind: Replace spaces with tabs in shell functionMuhammad Shakeel1
As per OE-Core convention, indentation should be TAB for shell. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16lighttpd: Replace spaces with tabs in shell functionMuhammad Shakeel1
As per OE-Core convention, indentation should be TAB for shell. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-14opkg.inc: remove the obsolete POSTLOG variableChen Qi1
With the current implementation of postinst logging mechanism, the location for log file is configured via the POSTINST_LOGFILE variable. The POSTLOG variable is obsolete now, thus removing it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-14cogl: GL/GLX feature cleanupRoss Burton1
Separate GL and GLX flags don't make sense, as on Linux GL means GLX and GLX means GL. So, default to GLESv2 and GLX if X11 is enabled. EGL on X11 doesn't have feature parity yet so leave it disabled by default. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-14linux-dtb: Use kernel build system to generate the dtb filesOtavio Salvador1
As the Linux kernel, unconditionally, builds the dtc application and it is the compatible version with the DeviceTree files shipped within the kernel it is better to use it and the kernel build system to generate the dtb files. Some DeviceTree files rely on CPP and kernel headers to be able to generate the dtb binary contents and it is harder to replicate it outside of Linux kernel build system so we /use/ it. To comply with these assumptions we need to use the dtb file when calling 'make' instead of pointing to the DeviceTree source file; the code has been made backward compatible but it is advised to move to the new definition to avoid warnings as: ,----[ Original definition ] | KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabresd.dts" `---- Becomes: ,----[ New definition ] | KERNEL_DEVICETREE = "imx6q-sabresd.dtb" `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-14systemtap: upgrade to 2.3Cristiana Voicu2
Disabled javac and jar. Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-14meta-skeleton: layer.conf Should also have .bbappend in exampleSaul Wold1
This will allow for an example recipe with a .bbappend, such as busybox or kernel configure fragments. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13meta-skeleton: Add busybox config fragment exampleSaul Wold2
This shows an example of the config fragment support that both the linux-yocto and busybox recipes use. This example is specific to busybox. By adding busybox CONFIG options into a .cfg file and then adding that .cfg file to SRC_URI the merge_config.sh script will correctly handle these CONFIG options during the do_configure task. The merge_config.sh script uses a last-in wins method. For more details about this, see the Kernel Development Manual Section 2.2.3 http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.html#changing-the-configuration Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-13qemu: Skip it for mips64 targetKhem Raj3
We should not skip it always since same recipes provide qemu-native too so user class-target override to make it only skip for target recipes Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-13dpkg: fix include header caused compile errorKai Kang2
Build dpkg-native on Fedora 19, it fails with: /usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’: /usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with abs(long long __x) { return __builtin_llabs (__x); } ^ /usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here abs(long __i) { return __builtin_labs(__i); } ^ That because header cstdlib is included in a 'extern "C"' block that gcc 4.8 doesn't support. Fix it by move the header file out of the 'extern "C"' block. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13oe-setup-builddir: substitute ##OEROOT## when using templatesRoss Burton1
oe-setup-builddir substitutes ##COREBASE## which seems like it should have the same value as the variable ${COREBASE}. In reality it doesn't as ##COREBASE## is substituted with the value of $OEROOT (the location of the oe-init-build-env script), whereas ${COREBASE} is set by oe-core to the parent directory of meta/. If oe-core's meta/ isn't a top-level directory then ##COREBASE## and ${COREBASE} have different values, which can lead to confusion. To resolve this, deprecate (but still substitute) ##COREBASE## and substitute ##OEROOT# for $OEROOT. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13procps: Add cgroup supportJukka Rissanen2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13blacklist.bbclass: Avoid blacklist specific handle in base.bbclassOtavio Salvador2
base.bbclass had code which handled the PNBLACKLIST in case of multilib use. This is better to be done in the blacklist.bbclass so it has all logic in a single place. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13opkg: Fix possible installation of GPLv3 headerPaul Barker2
opkg is GPLv2+ licensed but it has optional support for sha256 checksums which was GPLv3+ licensed. This code is not built unless '--enable-sha256' is passed to the configure script, the default is equivalent to '--disable-sha256'. However, the header 'sha256.h', which is GPLv3+ licensed, is in the list of header files to be installed and thus could end up in the libopkg-dev package. As this header is installed to '/usr/include/libopkg' it is very unlikely that it will ever be used. However, if you're uncomfortable with GPLv3 code going anywhere near your target filesystem you won't want this to happen. The simplest solution is to replace the sha256 implementation in opkg with the implementation from coreutils-6.9 which is licensed under GPLv2+. This is committed to the opkg subversion repository as r652/r653. The only intervening commit between r650 (previous SRCREV) and this is r651, which integrates 'obsolete_automake_macros.patch' into the opkg sources. Thus this patch isn't needed in oe-core anymore. (Note: Before 873689bbabba25e7be5c12317c04519a7bc8d0ef, this header is only installed if opkg is built in its source tree (ie. ${B}=${S}). After that commit the header will always be installed) Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13kernel.bbclass: Correct post(inst|rm) package associationDarren Hart1
Fixes [YOCTO #4991] The kernel image is installed as part of the kernel-image package, but the symlink creation/removal via alternatives is being done in pkg_post(inst|rm)_kernel-base. Move the postinst alternatives logic into the kernel-image functions. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13groff: Add GPLv2 versionSaul Wold4
Apparrently a LICENSE change was missed, so we add the GPLv2 version back in Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13groff: Fix License to be GPLv3Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13image.bbclass: Move runtime_mapping_rename to avoid conflict w/ multilibMark Hatle1
[YOCTO #4993] Move the runtime_mapping_rename into a prefunc for the do_rootfs function. Otherwise doing it in the python section could occur BEFORE the multilib classes renaming. If the package 'b' is a kernel module, then lib32-b and b should both point to the same package. The runtime_mapping code will do this automatically. Before if you ran: bitbake lib32-<image> It may do: start PACKAGE_INSTALL (a b c) remap (a b c) MULTILIB naming (lib32-a lib32-b lib32-c) What we want is: start PACKAGE_INSTALL (a b c) MULTILIB naming (lib32-a lib32-b lib32-c) remap (lib32-a b lib32-c) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13rpm: Enable compatibility with older RPM packages that have invalid platformsMark Hatle2
Some LSB packages appear to have the platform set to '%{_target_platform}' which is not a valid platform field. This causes a failure of the type: warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform When we detect an invalid platform, fall back and try to construct a new platform name that may be valid based on the arch and os contents of the package. (This should only ever be needed by invalid or older RPM packages.) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13rpm: Change references from RPM_VENDOR_POKY to RPM_VENDOR_OEMark Hatle6
Change the #define references to match RPM_VENDOR_OE. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13linux-dtb.inc: Replace /boot/ with /${KERNEL_IMAGEDEST}/Mike Looijmans1
Devicetree files were installed hard-coded in /boot. When KERNEL_IMAGEDEST is anything else but "boot", the postinstall script and the file locations no longer match and the postinstall will fail. Replace "boot" with "${KERNEL_IMAGEDEST}" to fix this problem, and to allow the devicetree files to be installed in another location. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13grub_0.97: Fix to correctly ship files under /usr/libChen Qi1
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to make grub_0.97 build with automake-1.12. However, it forgot to set up the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib. This in turn resulted in an unworkable grub. This patch fixes this problem by setting up the pkgdatadir correctly. [YOCTO #4997] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13lib/oeqa/runtime: add new systemd testsAlexandru Palalau1
New systemd runtime tests for enable/disable service, start/stop service and list services. Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13lib/oeqa/runtime: rework syslog testStefan Stanacar1
Add separate tests for restarting syslog and using logger, and skip the configuration test for systemd images which always fail because syslog's systemd service doesn't read a config by default (see YB#4860). Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13oeqa/utils/qemurunner: get ip old fashioned way and use tcp serial consoleStefan Stanacar2
The way we read data from the serial console was unreliable and blocking (AutoBuilder seems to hit that often), so change the serial console type from unix socket to tcp and reverse the connection - don't let qemu act as server (wait for a connection). So now the serial console is used to save the boot log and make sure that we reached the login prompt. Until a better way is found this should solve some of the AutoBuilder failures (one being YB#4904). Also we need to use the same method as the old qemuimagetest to get the ip (from the qemu process arguments), because that it's more reliable. The first version used here was to log into the target and use the output of "ip addr show eth0" but then systemd decides that it should rename interfaces, so that was changed to get the ip of the interface that has the default gw, but if there is no default gw we'll get the loopback ip and we end up trying to ssh into the host machine (some recent AutoBuilder runs showed that). Changed in V2: - use -ww for ps, as output might get truncated Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13classes/testimage: create a link for qemu boot logStefan Stanacar1
The full name for the log is confusing when there are multiple files. Also move the ssh log path stuff where it's needed. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13mesa: fix and enable out-of-tree buildsRoss Burton5
One patch (submitted upstream) for when Gallium is enabled, and another (inappropriate for upstream) to fix out-of-tree builds with 0003-EGL-Mutate-NativeDisplayType-depending-on-config. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: set SUMMARY instead of DESCRIPTIONPaul Eggleton1
We only have a short description, so set SUMMARY and DESCRIPTION will be defaulted from it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: enable using yasm during buildPaul Eggleton1
A recipe is now available for this, and it should enhance performance on x86/x86-64. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: merge in bbappend from meta-oePaul Eggleton1
* Enable external libav for better optimisations/additional bugfixes (internal ffmpeg copy is quite old), default enabled but can be disabled using PACKAGECONFIG * Add a PACKAGECONFIG for orc, disabled by default in line with other gstreamer recipes * Bump PR to r7 so the bbappend can be dropped without PR going backwards Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13libav: add from meta-oe, update and tweakPaul Eggleton4
Changes from the meta-oe recipe: * Update stable recipe to 0.8.8 * Update git recipe to the tag for 9.8 (for now) * Switch over to a tarball for the release version recipe * Add LICENSE_FLAGS = "commercial" * Set SUMMARY instead of DESCRIPTION * Add yasm-native to DEPENDS since there is now a recipe for it * Remove libvpx from DEPENDS and add a PACKAGECONFIG option for it, disabled by default since it wasn't actually being enabled * Add a PACKAGECONFIG option for x11 to enable/disable x11grab, and add the proper DEPENDS if so (still defaults to enabled) * Add a number of other PACKAGECONFIG options, replacing some old comments as well as offering the ability to disable x264. * Hide text relocation warning when building for i586 (PIC can't be enabled for 32-bit x86). * Drop PR Notes for the git recipe: * This hasn't been able to be built recently in meta-oe since there was a circular dependency between libav and libpostproc. libpostproc is part of libav 0.8.x but was split out in 9+ and is not needed at all anymore by libav itself, so this dependency was removed. * Additionally the recipe was filtering out the option to enable libpostproc but this option wasn't being added by the inc file and thus the filter wasn't doing anything, so I dropped this as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13x264: add from meta-oe, update and tweakPaul Eggleton2
This is required by the default configuration of libav being brought over from meta-oe. Changes from the meta-oe recipe: * Update to the latest revision from the stable branch (upstream does not seem to provide stable releases.) * Add LICENSE_FLAGS = "commercial" * Enable PIC to fix text relocation warnings and disable warning for i586 (since PIC can't be used there) * Make SUMMARY value slightly shorter * Indent SRC_URI consistently with other recipes in OE-Core Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13yasm: add from meta-oe and tweakPaul Eggleton1
This is needed for x264. Enabling it for libav also improves performance on x86 and x86-64. Two minor changes from the meta-oe recipe: * Set SUMMARY instead of DESCRIPTION * Drop setting of S - it was setting it to the same as the default Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09checkroot.sh: respect the value of ENABLE_ROOTFS_FSCKChen Qi1
Previously, fsck is always disabled because the value of rootcheck in the checkroot.sh script is always set to 'no'. We should respect the value of ENABLE_ROOTFS_FSCK in /etc/default/rcS to allow for filesystem check. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 08:33:56 +0000