summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-09-11classes/package_rpm: remove unsed outdir variableStefan Stanacar1
Not only outdir had the wrong value, it wasn't used actually used in that function. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11ptest-runner: trivial fixes and refineRoy Li1
1. ptest files may be installed under /usr/lib64/ for 64bit filesystem or under /usr/lib/ for 64bit multilib filesystem, so we should check both directories 2. If a soft link is linking to a directory under the same directory, we only run once. [YOCTO #5125] [YOCTO #5126] Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11libcroco: disable Bsymbolic if it is not supported on some hostsTing Liu1
When trying to build on my Centos 5.5 machine, got below error: | checking for gtkdoc-mkpdf... no | checking whether to build gtk-doc documentation... no | checking for CROCO... yes | checking if gcc supports "-Wl,-Bsymbolic-functions" flag... | configure: error: -Bsymbolic requested but not supported by ld. Use --disable-Bsymbolic to disable | Configure failed. The contents of all config.log files follows to aid debugging | | configure: exit 1 | ERROR: oe_runconf failed Set --enable-Bsymbolic=auto to disable it when it is not suppported. Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11python-smartpm: Add an attempt install modeMark Hatle3
[ YOCTO #3723 ] Add a mode to smart that will allow an installation to continue, instead of failure in the case that one or more items is uninstallable. Uninstallable packages are simply ignored, and no error is generated. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11uclibc: Add missing DEPENDS on kern-tools-nativeRichard Purdie2
This is needed for the kconfig handling and the merge-config.sh script. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11image/populate_sdk: Ensure symlinks in target sysroot are relativeRichard Purdie2
In the target sysroot of an SDK we can have target system absolute links which don't make sense. This adds a script which fixes them up to become relative paths instead. [YOCTO #5020] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11qemu: only depend on mesa-driver-swrast if opengl is enabledRoss Burton3
As Mesa refuses to compile if the "opengl" DISTRO_FEATURE isn't enabled, mesa-driver-swrast has to be conditional in the QEMU machine defintions too. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11init-live.sh: distinguish between a read-only image and a read-write imageChen Qi1
The iso and hddimg share a common concept of 'live image', and they use the same initramfs and thus the same init. However, that init script in initramfs made a wrong assumption that the rootfs image was read-only by itself. This is apparently not true for hddimg. To make things work as expected, this init script should at least distinguish between a read-only rootfs image and a read-write one. This patch adds this ability to the init script. After this change, the init script would be able to check whether the rootfs image is read-only or not. If the rootfs image is read-write, the image will be mounted and then booted directly. No union mounts will be attempted in this case. [YOCTO #5164] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-11midori: excluded from mips64 temporarilyKai Kang1
Exclude midori from mips64 temporarily. Becuase midori depends on webkit-gtk which could not build for mips64 with 64bits userspace now. [YOCTO #5141] Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10systemd.bbclass: get the correct /lib directorySaul Wold1
By using os.path.dirname(systemd_unitdir) we get the correct /lib directory instead of dealing with possibly multilib directories. This address a QA Error for shipped/not installed /lib with multilib and x32. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10systemd: Remove base_libdir if installed only for systemd_unitdirMuhammad Shakeel1
If a recipe installs systemd_unitdir and it is a non-systemd build than systemd.bbclass deletes systemd_unitdir (/lib/systemd/) but not base_libdir (/lib). In this case if base_libdir is empty than following QA Issue is reported. ERROR: QA Issue: openssh: Files/directories were installed but not shipped /lib If base_libdir was installed due to systemd_unitdir installation than for non-systemd build it should also be removed. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10nfs-utils: Add systemd supportMuhammad Shakeel5
- Remove dependency on meta-systemd Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10rpcbind: Add systemd supportMuhammad Shakeel3
- Remove dependency on meta-systemd Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10lighttpd: Add systemd supportMuhammad Shakeel2
- Remove dependency on meta-systemd Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10openssh: Add systemd supportMuhammad Shakeel4
-Remove dependency on meta-systemd Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10avahi: use correct names in SYSTEMD_SERVICE_* variablesRoss Burton1
Don't hard-code full package names in SYSTEMD_SERVICE_*, because in multilib they'll be changed. [ YOCTO #4803 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10dbus-ptest: fix populate_sdk errorMaxin B. John1
When we enable "ptest", populate_sdk fails with the following error: # bitbake core-image-minimal -c populate_sdk .. Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies for dbus-ptest-dev: * dbus-ptest (= 1.6.10-r0) * * opkg_install_cmd: Cannot install package dbus-ptest-dev. Disable that dependency. Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10initscripts: filter out empty lines from volatiles in check_requirements()Ming Liu1
So far the rules of check_requirements() is too strict to lead mismatch when empty lines exist in volatiles. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10btrfs-tools: fix a parallel build issueRoy Li2
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10mount.sh: automount cdrom device even if no ID_FS_TYPE availableChen Qi1
This script was modified to check whether $ID_FS_TYPE is empty before automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not set, yet the device should be mounted. Otherwise, when booting an iso image with runqemu, the boot process hangs at 'waiting for removable media'. This patch fixes this problem by first checking whether the block device is a cdrom. [YOCTO #4487] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10gstreamer-plugins: Change anonymous python structureSaul Wold1
This change ensures that the SRC_URI is set before base.bbclass code is called. This will also ensure that the xz-native depends is set correct. [YOCTO #5127] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10cmake.bbclass: ensure CMAKE_SYSTEM_NAME is correctSaul Wold1
Using TARGET_OS can add the ABIEXTENSION so ensure that is is removed for the Linux TARGET_OS, we might have other TARGET_OSes so don't hard code CMAKE_SYSTEM_NAME [YOCTO #5145] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10adt-installer: allow installation of other machinesLaurentiu Palcu5
Currently, adt-installer allows only the installation of qemu target sysroots. The changes in this patch do the following: * add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for each target architecture. For example, for arm we can choose to use a qemuarm sysroot or a beagleboard sysroot. By default, only the qemu target sysroots are selected (current behavior); * change adt_installer scripts to allow installing the correct meta-environment package for the selected machine; * remove some left-over commented lines; * use packagegroup-cross-canadian-${MACHINE} when installing the cross canadian packages instead of doing it separately for each package; * change the opkg config files in order to be able to find the packagegroup package, which is allarch; [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10meta-toolchain-qt: include the proper cross-canadian packageLaurentiu Palcu1
packagegroup-cross-canadian package name was changed to contain MACHINE. Make the necessary changes here too. [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10populate_sdk_base.bbclass: select the proper cross-canadian packageLaurentiu Palcu1
Since packagegroup-cross-canadian package name has MACHINE in it, make the necessary changes here. [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10packagegroup-cross-canadian: change package name to include MACHINELaurentiu Palcu1
Since meta-environment package name was changed to contain MACHINE, change packagegroup-cross-canadian package name too, in order to be able to select the proper environment files for a certain machine. Also, remove the RPROVIDES since adt-installer doesn't really need it. [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10meta-environment: change package name to include MACHINELaurentiu Palcu1
Currently, the package name contains just the TRANSLATED_TARGET_ARCH. When compiling the toolchain for two machines, belonging to the same architecture (for example: qemuarm and beagleboard), this package gets overwritten and adt-installer repo will contain just one meta-environment package... This leads to situations like installing the toolchain for qemuarm and end up with meta-environment package with beagleboard cpu options. [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10linux-yocto/3.10: bump kver to 3.10.11Bruce Ashfield3
Bumping to the 3.10.11 -stable release. Of note in this update is the timer_list fix, which broke ssh access in the previous 3.10 series of updates: timer_list: correct the iterator for timer_list commit 84a78a6504f5c5394a8e558702e5b54131f01d14 upstream. With this, we can revert the two temporary fixes for timer lists. ssh access has been directly tested after this update. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10u-boot, u-boot-fw-utils-cross, u-boot-mkimage: Upgrade to 2013.07Otavio Salvador15
This upgrades the U-Boot based recipes for 2013.07 release. This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a single one in core. The following recipes has been upgraded: - u-boot (remove old versions) - u-boot-mkimage (remove old versions) - u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked) The u-boot-fw-utils-cross recipe has been reworked as it uses the UBOOT_MACHINE to find default environment for use so it is indeed a cross binary and not a native one. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10systemd: Fix build with multilibKhem Raj1
rpm macros should be independent of libdir Fixes errors seen when multilib is turned on it shows up since then libdir != usr/lib Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10systemd: update patch header and commentsRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10xf86-video-intel: allow builds without opengl, add more optionsRoss Burton1
Allow builds without the opengl DISTRO_FEATURE by disabling DRI. Also add new options for UXA (not default upstream, requires DRI) and udev (enabled by default) Finally remove a few obsolete dependencies. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10mesa: use distro_features_check to abort build without opengl featureRoss Burton1
Stop mesa from building on distributions without the "opengl" DISTRO_FEATURE. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10kmod: avoid parallel-testsTudor Florea2
Avoid parallel-tests for kmod as it remove buildtest-TESTS and runtest-TESTS targets required by ptest. Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10lttng-modules: Update to version 2.3.0Paul Woegerer1
Signed-off-by: Paul Woegerer <paul_woegerer@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10lttng-tools: Update to version 2.3.0Paul Woegerer1
Signed-off-by: Paul Woegerer <paul_woegerer@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10lttng-ust: Update to version 2.3.0Paul Woegerer1
Signed-off-by: Paul Woegerer <paul_woegerer@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10ptest.bbclass: add cleandirs flag to do_install_ptest_baseChen Qi1
The do_install_ptest_base task should have cleandirs flag, just like the do_install task. The ${D}${PTEST_PATH} directory should be cleaned, Otherwise, there would be similar errors like below if the do_install_ptest_base task is rerun. ln: failed to create symbolic link `xxx': File exists [YOCTO #5129] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10ptest.bbclass: fix error on ubuntu hostChen Qi1
The do_install_ptest_base function uses 'type -t' command to check whether do_install_ptest is a function and acts correspondingly. However, the 'type' command is a shell builtin and its behavior is not all the same across Linux distros. On ubuntu, if we use #!/bin/sh as the interpreter for the scripts, as in the case of our intermediate scripts, the '-t' option for the 'type' command is not supported. So the check always fails and the do_install_ptest function, even if defined, is not run. The same problem also applies to the do_configure_ptest_base and the do_compile_ptest_base functions. This patch fixes this problem by avoiding using the 'type' builtin command. [YOCTO #5128] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-09qemu.inc: remove apm as a MACHINE_FEATURESaul Wold1
APM is not only obsolete, but requires a kernel config enabled and is meaningless for QEMU VM [YOCTO #5121] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-08cmake: set system name correctlyRichard Purdie1
For unknown reasons, the cmake class is using SDK_OS as the target system OS. This makes no sense but only shows up as a problem when you try a different SDK OS. Fix it to use TARGET_OS which is the correct thing to do. For the vast majority of users this will make no difference. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06package.bbclass: skip already-stripped QA test if asked forKhem Raj1
Some packages like grub have already stripped binaries e.g. ERROR: QA Issue: File '/boot/grub/kernel.img' from grub was already stripped, this will prevent future debugging! ERROR: QA run found fatal errors. Please consider fixing them. We would like to have a possibility to skip it using something like INSANE_SKIP_${PN} = "already-stripped" This adds the logic to do so it acts at PN level and not at package level. so something like INSANE_SKIP_${PN}-misc = "already-stripped" wont work. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06ghostscript: Add missing dependency to resolve parallel make issueRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06uboot-config.bbclass: Allow choose of U-Boot config for machineOtavio Salvador1
Some machines provide several possible configurations and until now there was no easy way for user to override the default setting. This class provides a system similar to PACKAGECONFIG but for U-Boot. The format is: UBOOT_CONFIG ??= <default> UBOOT_CONFIG[foo] = "config,images" There are two possible parameters: - config: it is used to set UBOOT_MACHINE - images: it is used to append onto IMAGE_FSTYPES Below there's an usage example: ,----[ i.MX6Q SABRE AUTO based example ] | UBOOT_CONFIG ??= "sd" | UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard" | UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config" | UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs" | UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config" `---- User can, from local.conf or environment, use UBOOT_CONFIG=nand and override the default setting, as: ,----[ Override example from command line ] | MACHINE=imx6qsabreauto UBOOT_CONFIG=nand bitbake core-image-base `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06linux-firmware: Update SRCREV, pull in iwlwifi-7260 supportDarren Hart1
Fixes [YOCTO #5110] Add support for the iwlwifi 7260 adapters. This creates a new package and includes support in the default linux-firmware (everything) package. Update the iwlwifi and radeon license checksums. Extensions to the copyright date ranges were the only change to the LICENSE files. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: yunguo.wei@windriver.com Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06kern-tools: support no author patchesBruce Ashfield1
Updating the kern-toosl SRCREV to pick up the following fix: previous versions of the kern-tools supported the ability to import a bare patch, with no From: Subject: or other identifying fields that are typically in a full commit. The same type of commit with kgit-s2q will prompt for a author ID, just as git-quilt-import does. In build system environment that leads to an infinite loop and the commit is never pushed. To fix this issue, we add an interactive flag (-i), that when passed the prompt based behaviour is used. When it isn't passed (the default), the following name and email will be used for the git author: GIT_AUTHOR_NAME="invalid_git config" GIT_AUTHOR_EMAIL="<unknown@unknown>" And a bare/incomplete header patch will be applied. [YOCTO #5100] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06kernel-yocto: improve error checking on non-git reposBruce Ashfield1
While non-git kernel repos are not the preferred format for a kernel upstream, they are supported. Depending on the creator of the archive the expanded source directory name varies. If the recipe for the kernel doesn't properly set S to the right value, a cryptic git error message is produced. We can detect the situation and offer some advice on how to fix the issue. A second check is also added in this commit for archive based kernel repos which won't have a SRCREV to validate. If we have no SRCREV or SRCREV is INVALID, we can exit the branch validation step immediately. This saves yet another cryptic git error message and simplifies a custom tgz based recipe. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06linux-yocto/3.10: update meta SRCREV for beagleboard config changesBruce Ashfield3
Updating the beagleboard configuration to match the 3.10 kernel changes. With this, the beagle* boards boot out of the box, with no additional changes required. Simarpreet Singh <simar@linux.com> Signed-off-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06bluez5: Rename tests package to testtoolsMihai Prica1
Bluez5 ships some tools that can be used to test its functionality. The installation can be tested using "make check" and this should be included in a ptest package. [YB #5028] Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06bluez5: Install the bluetooth libraryMihai Prica1
Bluez5 doesn't install libbluetooth by default. This is required by connman, ofono or other packages. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 07:20:04 +0000