summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2014-07-16file: remove dump and filesystemsRobert Yang3
I can't find the reason from the log why we need them, and they are out of date, so remove them, then file would use the one from its package. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16file: fix perl reported as awkRobert Yang2
The awk pattern was checked *before* the Perl pattern, so the perl script with BEGIN{...} would be reported as awk, this patch fixes it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16git: update to v2.0.1Nicolas Dechesne2
Also fetch source code from kernel.org. As per the Git release announcement, see [1], Git source tarball are now located back on kernel.org, at [2]. [1] https://lkml.org/lkml/2014/6/25/760 [2] https://www.kernel.org/pub/software/scm/git/ Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16classes/insane: Show QA check nameChong Lu1
QA errors/warnings would show the name of the QA failure in the error/warning message. The format is listed: <message> [QA check name] You can see which QA check you need to disable if you want to disable it. [YOCTO #6160] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16Remove long-deprecated "task-core" backward compat for packagegroups.Robert P. J. Day18
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16pseudo_1.6.0.bb: uprev to pseudo 1.6Peter Seebach4
This uprevs pseudo to 1.6. This merges in all of the existing fixes, and also adds partial support for extended attributes, including storing arbitrary extended attributes in the database, and also interpreting the posix permissions ACLs as chmod requests. The extended attribute support means we need xattr.h, the simplest way to be sure of this is to build attr before pseudo, which doesn't take long. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16groff: fix PERLPATHRobert Yang1
There is no PERLPATH, but "${USRBINPATH}/env perl". Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16xorg-driver: use PACKAGEFUNCS instead of populate_packages_prependRoss Burton3
The dependency adding function has nothing to do with package splitting, so move it to a PACKAGEFUNC. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16default-versions: remove xf86-video-intelRoss Burton1
Setting PREFERRED_VERSION to the latest version available is redundant, so remove it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16xf86-video-intel: upgrade to 2.99.912Ross Burton2
Drop a backported patch that has been applied. Apply a patch from upstream to add enable/disable options for each DRI level, as .912 won't build if the X server doesn't support DRI3. Add PACKAGECONFIG options for each DRI level and enable DRI1 and DRI2. Add a PACKAGECONFIG option for the client tools, disabled by default as they're only useful on machines with hybrid discrete/integrated GPUs. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16wic: Error on zero-sized partitionsTom Zanussi1
It doesn't make sense to create zero-sized partitions so assume user error and notify the user they should be using a non-zero --size for partitions that don't specify a --source. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16wic: Add kickstart reference to help systemTom Zanussi3
Add a 'wic kickstart' help section to make it easy for users to access the kickstart reference without having to go to an external website. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16wic: Add wic overview to help systemTom Zanussi2
Add a general overview of wic to the help system as 'wic overview', along with some introductory examples. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16wic: Add vfat supportTom Zanussi1
Add vfat as a supported rootfs type (in addition to the current ext2/3/4 and btrfs support). vfat partitions can now be created using --source rootfs along with --fstype=vfat, or without --source but specifying a --size. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16wic: Error on parted non-zero error codeTom Zanussi1
The current code uses msger.debug() to note errors, effectively squelching them if --debug isn't used. Apparently this is because it can return non-zero for some loop device failures. We don't care about loop devices, and not paying attention to the error code actually results in invalid images, so error out on parted failures as we should be. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-11insane: Ensure do_package_qa happens after do_packagedataRichard Purdie1
We're relying on the packagedata being available for this task to work correctly so lets ensure it is with the correct dependency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10lib/oe/image.py: check the rootfs size against IMAGE_ROOTFS_MAXSIZERobert Yang2
* Check the rootfs size against IMAGE_ROOTFS_MAXSIZE (if set) * Add comments for IMAGE_ROOTFS_SIZE to not confuse with IMAGE_ROOTFS_MAXSIZE [YOCTO #2610] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10oeqs/selftest: Added test case decorators for the rest of selftest testcases ↵Lucian Musat4
except toaster Signed-off-by: Lucian Musat <georgex.l.musat@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10xserver-xorg.inc: add PACKAGECONFIG for xmltoHongxu Jia1
Support xmlto for documentation generation and disable it by default. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10xorg-lib-common.inc: add PACKAGECONFIG for xmltoHongxu Jia1
Support xmlto for documentation generation and disable it by default. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10xorg-proto-common.inc: add PACKAGECONFIG for xmltoHongxu Jia1
Support xmlto for documentation generation and disable it by default. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10alsa-utils: add PACKAGECONFIG for xmltoHongxu Jia1
Support xmlto for documentation generation and disable it by default. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10cups.inc: Delete obsolete "PROVIDES" line.Robert P. J. Day1
Remove "PROVIDES =" line that refers back to CUPS version 1.4. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10wic: Add general 'plugins' help topicTom Zanussi2
Add a category for help topics with an initial help topic discussing source plugins. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10wic: Add dummy subcommand and usage stringsTom Zanussi1
In order to reuse the existing subcommand infrastructure to display various general-purpose help topics, add a dummy 'help_topic' subcommand and usage string. This allows users to invoke general help topics by the natural form 'wic help <topic>' even though topic doesn't correspond to a real subcommand. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10wic: Print error if a partition specifies an invalid --sourceTom Zanussi1
If a partition specified in a .wks file specifies a nonexistent --source, print an error to that effect and exit. The error text also points the user to a command listing valid sources, and help on adding a new source plugin. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10wic: Add help text for 'wic list source-plugins'Tom Zanussi1
Add both short and long text for the new 'wic list source-plugins' command. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10wic: Add command to list available source pluginsTom Zanussi2
Add a 'wic list source-plugins' command enabling users to get a list of valid partition --sources. This is useful not only for determining sources to use in .wks partition statements, but also for making sense of errors in .wks partition processing. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10rpm: disable -Wno-override-initRobert Yang3
Fixed rpm-native.do_configure error on CentOS 5.x: cc1: error: unrecognized command line option "-Wno-override-init" The -Wno-override-init was commented in rpm-5.4.9, but commented out in rpm-5.4.14 thus it is failed to build on CentOS 5.x, comment it again to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10libnss-mdns: replace hardcoded /etc with ${sysconfdir}Koen Kooi1
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10libnss-mdns: support ipv6 in lookupsKoen Kooi1
It nothing can resolve the hostname as ipv4 it will also try ipv6. Ideally the mdns4_minimal should get replaced as well, but there's some handwaving on the internet stating it will slow things down if your ipv6 network is misconfigured. Since I can't verify that slowdown I've opted for the safe way and only do ipv6 lookup in the fallback entry. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10libpcap: fix depends on libnlRobert Yang1
Fixed: * libnl1 -> libnl * Remove libnl from DEPENDS since we are using PACKAGECONFIG, the libnl in the DEPENDS didn't affect libpcap since the --without-libnl took effect before this patch, so it is safe to remove it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10Move boot media to /media/realroot for easy access after boot.Brian Lloyd2
There are cases where software after boot may need to know the current boot disk. Under the current system, it is not guaranteed which disk is the boot. While /media/sda is a good guess, it isn't always right, nor is it a good assumption that only one boot disk is in the system. This gives a standard path to the original boot disk mount which can be used to, for instance, update the syslinux file on the boot media with a newer kernel, or updating the boot parameters to add user options for future boots. Knowing which disk is the boot media keeps from updating the non-boot disk when for instance multiple syslinux boot medias are plugged in (ie ensure correct syslinux is updated when the booted system is updated). Signed-off-by: Brian Lloyd <blloyd@familyhonor.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10package.bbclass: add a stub implementation of package_name_hookRoss Burton1
do_package() calls package_name_hook so that e.g. debian-style renaming through debian.bbclass can happen. If there is no class providing a package_name_hook then this causes "WARNING: Function package_name_hook doesn't exist" every time do_package() is executed. Silence this warning by providing an empty package_name_hook in package.bbclass. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10bootimg.bbclass: Add parameter to specify HDDIMG volume IDRicardo Neri1
Users and children of the bootimg class may need to specify at build time the volume ID of the HDDIMG vfat partition. An example of this may be when at runtime the partition is uniquely identified by the volume ID. The HDDIMG_ID is expected to be provided externally. If the variable is not set, mkdosfs will use the default volume-id. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10init-install-efi.sh: improve hard drive searching processDrew Moseley1
(This patch was originally done against init-install.sh in OE-Core rev 358f0584d779825307eec08c023b5ff14e72cf9e) Previously, only unremovable hard drives are searched and are treated as candidates of target disks to intall into. However, it's possible that we're going to install the live image into a removable media such as an USB. This patch enables this possibility. In addition, this patch presents more information about the hard drives so that user may have more knowledge about which hard drive they are going to install their image into. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10init-install-efi.sh: fix to handle the boot partition correctlyDrew Moseley1
(This patch was originally done against init-install.sh in OE-Core rev aa67b1333b4774e1845f562085f7048df65a644f) Previously, the boot partition was created for the target hard drive but there was no corresponding entry for it in /etc/fstab. Besides, even if the boot partition was mounted, it would just result in odd directory hierarchy like /boot/boot/grub. However, what we really need is /boot/grub. This patch fixes this problem. Besides, for future maintance work, this patch also renames some of the intermediate directories. It uses more descriptive names like /tgt_root and /src_root. The name of /ssd is dropped. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10gcc: Ensure c++ includes are in /usr/include/c++/${BINV}Richard Tollerton5
It was observed that code using STLport 4.6 fails to compile under the SDK with the following error message: .../includes/cstddef:38:46: fatal error: ../4.7.2/cstddef: No such file or directory STLport 4.6 (screwily) assumes that the C++ system headers live in a gcc-versioned subdirectory, for gcc>=3.0; cf http://sourceforge.net/p/stlport/code/ci/STLport-4.6-patch/tree/stlport/config/stl_gcc.h#l269. This assumption is *almost always* valid, because that matches the default setting of --with-gxx-include-dir. We can match that behavior by appending "/${BINV}" to our own --with-gxx-include-dir settings. Natinst-CAR-ID: 446449 Natinst-Reviewboard-ID: 57209 Acked-by: Ken Sharp <ken.sharp@ni.com> Acked-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10builder: removed setting of BB_NUMBER_THREADS and PARALLEL_MAKECristian Iorga1
This values are now adjusted automatically, based on underlying hardware CPU cores count, so no need to enable manually. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10weston: make webp explicitly configurableTim Orling2
This patch fixes: weston/weston/latest lost dependency on libwebp weston/weston-examples/latest lost dependency on libwebp from: http://lists.openembedded.org/pipermail/openembedded-core/2014-June/093704.html Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10cogl-1.0: update to 1.18.2Tim Orling2
Announcement: http://lists.freedesktop.org/archives/cogl/2014-July/001689.html Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10init-install.sh: Verify /sys based files exist before displaying themDrew Moseley1
Some mmc cards do not have all the data files in /sys/block populated. Check for existence before displaying the files to avoid erroring out of the install process. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10base-passwd: install passwd and group atomicallyRobert Yang1
Fixed the race issue: util-macros.do_package failed: 'getpwnam(): name not found: root' The error happens when there is a half etc/passwd, fixed by: $ install usr/share/base-passwd/passwd.master etc/passwd.master $ mv etc/passwd.master etc/passwd The "mv" is atomic which will fix this problem. [YOCTO #6124] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10kernel.bbclass: update KERNEL_IMAGE_MAXSIZERobert Yang1
* Make KERNEL_IMAGE_MAXSIZE and IMAGE_ROOTFS_SIZE have the same algorithm: - Use Kbytes as the unit since we use this in other codes. - Use "du" rather than "ls" to figure out the size since we use this in image.py. [YOCTO #2610] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10gzip: move uncompress bin to avoid cross-fs linkSaul Wold2
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10package.bbclass: Generate runtime-rprovides dataRichard Purdie1
Currently, given a list of rdepends its near impossible to figure out which ones are potentially invalid and which might be an RPROVIDES of a package. This problem is simple to solve, we can write lookup data into the pkgdata. This patch does that, accounting for the fact that multiple packages can RPROVIDE the same thing (particularly with locales). Its done with symlinks so the performance overhead is minimal. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10insane: Split do_package_qa into a separate task (from do_package)Richard Purdie1
Its possible to run the package QA checks as a separate task rather than as part of the do_package task. This offers more parallelism but the fact that made me propose this is that ideally we'd like to access pkgdata to help add new tests and to do that, we need to run later in the task list. We also need to add in RDEPENDS to the task which apply to do_package_write_* but not do_package. See the subsequent patches for why this is desireable. If we split into a separate task, we need to add in calls to read the sub package data, build the cache structure used by do_package and cover the task with sstate (which is empty and just acts as a stamp saying it passed package QA). We also need to handle our own dependencies. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10package.bbclass: Rewrite shlib_provider handling to include RPATHRichard Purdie1
Change the do_package shlibs code to account for RPATHS. This means that for library dependency purposes, only libraries in system paths or in any declared RPATH will be seen. This is important to resolve problems people have been having where similarly named libraries in "private" paths were conflicting, e.g. with gstreamer. For now this code assumes the default search path is libdir and base_libdir and places ASSUME_SHLIBS in libdir so they are searched by default. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10package.bbclass: Improve shlibs pkgdata file formatRichard Purdie1
Instead of having a .list file and a .ver file, place the version information into the .list file in a ":" delimited string. Also place the path to the library here, this can then be used to evaluate RPATHs in the shlib dependency code. Since the disk format has changed, the easiest way to avoid build failures in the same TMPDIR is to change the shlibs directory to shlibs2. sstate dependency code with ensure everything rebuilds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10package.bbclass: Rewrite sonames data structure to include library pathRichard Purdie1
In order to do more advanced processing of the shared libraries, we need to know where a given library is located on disk so we can know whether its a system path or a private directory for example. This patch adds this information into the 'sonames' data structure. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 01:52:10 +0000