summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2016-03-20linux-yocto/4.1: usb backports for Apollo Lake/BroxtonBruce Ashfield3
Importing a series of mainline backports to support USB on a couple of Intel platforms: b5f6aa9957dd usb: otg: add usb_otg_caps structure for otg capabilities bbce8fe2cc42 usb: dwc3: pci: add support for Intel Broxton SOC e734e1d9f827 usb: dwc3: pci: Set enblslpm quirk for Synopsys platforms 1c6bb6694d50 usb: dwc3: Add dis_enblslpm_quirk 1c6be99e56b8 usb: dwc3: pci: trivial: Formatting 2f2b89764b97 usb: dwc3: pci: passing forward the ACPI companion ea4b3c72d976 usb: dwc3: core: convert to unified device property interface dc670b52c69a usb: common: of_usb_get_dr_mode to usb_get_dr_mode 586fc5174649 usb: dwc3: st: prepare the driver for generic usb_get_dr_mode function 0624bd9af7ef usb: common: of_usb_get_maximum_speed to usb_get_maximum_speed e65bc5467e07 usb: dwc3: Add frame length adjustment quirk a90954c5d267 usb: musb: dsps: control musb speed based on dts setting b48ff160a993 usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS d1c59752195e usb: chipidea: set usb otg capabilities 733eada2cdec usb: common: add API to update usb otg capabilities by device tree 7ab2108dd82b usb: dwc3: core: avoid NULL pointer dereference 1aedb48b7dc9 usb: dwc3: add ULPI interface support 07e42a29fb7e usb: dwc3: pci: add quirk for Baytrails 065917252622 usb: dwc3: add hsphy_interface property b2bb32a363a3 usb: dwc3: setup phys earlier bf6bb0a6ebb5 usb: dwc3: soft reset to it's own function d481da949476 usb: dwc3: cache hwparams earlier 9ac66262a201 usb: dwc3: store driver data earlier 5f940588938c usb: dwc3: ULPI or UTMI+ select 04fdce097f83 usb: dwc3: USB2 PHY register access bits b7209213cc05 usb: add bus type for USB ULPI Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-20recipetool: create: don't create extra files directory unconditionallyPaul Eggleton2
The extra directory next to the recipe should only be created if there are files to put into it; currently only the npm plugin does this. I didn't notice the issue earlier because the test was actually able to succeed under these circumstances if the recipe file came first in the directory listing, which was a fault in my original oe-selftest test; apparently on some YP autobuilder machines the order came out reversed. With this change we can put the oe-selftest test that highlighted the issue back to the way it was, with an extra check to reinforce that only a single file should be created. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-13local.conf.sample: Disable prelink by defaultRichard Purdie1
prelink is having issues with IFUNC symbols such as tha for fork() in libpthread. Disable prelink for now until we can get to the bottom of the issue. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-13oeqa/selftest/recipetool: Fix test_recipetool_create_simpleRichard Purdie1
Correctly handle the any other files/directories that may exist during the test. ====================================================================== FAIL: test_recipetool_create_simple (oeqa.selftest.recipetool.RecipetoolTests) ---------------------------------------------------------------------- Traceback (most recent call last): File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/utils/decorators.py", line 106, in wrapped_f return func(*args, **kwargs) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/recipetool.py", line 414, in test_recipetool_create_simple self.fail('recipetool did not create recipe file; output:\n%s\ndirlist:\n%s' % (result.output, str(dirlist))) AssertionError: recipetool did not create recipe file; output: NOTE: Fetching http://www.dest-unreach.org/socat/download/socat-1.7.3.0.tar.bz2... NOTE: Unpacking /srv/www/vhosts/autobuilder.yoctoproject.org/current_sources/socat-1.7.3.0.tar.bz2 to /tmp/recipetool-Uj7MIh/ NOTE: Recipe /tmp/recipetoolqaebTo9s/recipe/socat_1.7.3.0.bb has been created; further editing may be required to make it fully functional dirlist: ['socat', 'socat_1.7.3.0.bb'] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-13Revert "packagegroup-core-x11-sato: add python-pygobject and gtk+3"Richard Purdie1
This reverts commit 7b60964d87698572f2f13d8dfa966a85f169b698. OE-Core defaults to no opengl in DISTRO_FEATURES and this would break sato with the default DISTRO settings. Need to revisit as Sato moves to gtk+3 but unbreak the builds for now as this change isn't essential.
2016-03-13oeqa/recipetool: Fix syntax errorRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12oeqa/recipetool: Improve debugging output by adding dirlistRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12uninative: Add a fix for icu-native to use the correct ABIRichard Purdie1
If no -std= option is passed to icu's configure, it defaults to CXX11. This isn't what we want for uninative, so pass an explicit option which selects an older ABI on newer versions of g++. This avoids the __cxa_bad_array_new_length@CXXABI_1.3.8 symbol being used. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12scripts/oe-selftest: Add short names to most common optionsHumberto Ibarra1
Add short names to most common options in oe-selftest. The options changed were --run-tests, --run-all-tests, --list-tests and --list-modules. [Yocto #9079] Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12gcc: Fix the license on GNU OpenMPHelio Chissini de Castro1
Poky jethro has libgomp ( GNU OpenMP ) license marked as GPL-3.0, where's in fact the correct is GPL-3.0 with GCC Library Runtime Exception As stated on https://github.com/gcc-mirror/gcc/blob/master/libgomp/libgomp.h header license: ... Under Section 7 of GPL version 3, you are granted additional permissions described in the GCC Runtime Library Exception, version 3.1, as published by the Free Software Foundation. ... Signed-off-by: Helio Chissini de Castro <helio.castro@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12Revert "gcc: Fix the license on GNU OpenMP"Ross Burton1
This reverts commit 892fbe373c5cff7b2f28b58aa2508b47e53d3e63.
2016-03-12perl: fix missing dependency for perl-miscCatalin Enache1
"perl-misc" package is adding tens of perl utilities which have depencies on perl-modules. For example, in order for "prove" to work correctly following modules are needed: RDEPENDS_perl-misc += "perl perl-module-app-prove perl-module-overloading perl-module-tap-base perl-module-file-glob perl-module-tap-formatter-console perl-module-tap-formatter-base perl-module-tap-formatter-file perl-module-tap-formatter-session perl-module-tap-parser perl-module-tap-parser-aggregator perl-module-tap-parser-scheduler" If we compile a list of modules needed by the utilities added by "perl-misc" we may end up having to add hundreds of modules to RDEPENDS_perl-misc. Rather than adding hundreds of dependencies only perl-modules was added. Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12classes/buildhistory: record a few more variables for extensible SDKPaul Eggleton1
We've recently added SDK_EXT_TYPE and SDK_RECRDEP_TASKS and these will have an effect on the size and functionality of the SDK, so record them in sdk-info.txt. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12package-deb: Ignore circular dependenciesRicardo Ribalda Delgado1
If a package depends on itself apt-get fails to install it with the error attached to this patch. This patch checks for this conditions and notifies the user so the recipe maintainer can fix his RDEPENDS variable. root@qt5022:~# apt-get install perl-module-cpan Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: perl-module-cpan 0 upgraded, 640 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/5964 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] E: Internal error: MaxLoopCount reached in SmartUnPack (2) for perl-module-cpan:amd64, aborting E: Internal error, packages left unconfigured. perl-module-cpan:amd64 root@qt5022:~# apt-get install perl-modules Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12package_deb: Fix python runtime errorRicardo Ribalda Delgado1
The dictionary cannot be used for iteration if its size may change during the loop. ERROR: Error executing a python function in /home/ricardo/curro/qt5022/build-qt5022/repo/yocto/meta/recipes-devtools/perl/perl_5.22.0.bb: Exception: RuntimeError: dictionary changed size during iteration Acked-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12python-numpy: fix buildpaths QA issueHongxu Jia2
Remove build path in comments: Without the fix: ... |This file is generated by /buildarea/raid0/hjia/build-20160225-yocto- buildpath/tmp/work/core2-64-poky-linux/python-numpy/1.10.4-r0/numpy -1.10.4/setup.py ... With the fix: ... |This file is generated by /numpy-1.10.4/setup.py ... [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12python: move ast module into python-coreRoss Burton4
The compile() method returns objects that inherit from ast.AST so it's best that python-core contains this class. [YOCTO #8684] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12xserver: require sufficiently new libdrmJohannes Pointner2
This fixes the check of the libdrm version in the configure script. Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12package_manager.py: Fix race condition in OpkgIndexer.write_index()Mariano Lopez1
When writing the index using ipk packages there could be a race condition when populate the index. This happens because the architectures are repeated (specially all) and the commands generated to write the index run in parallel. This change avoid the duplication of commands using a set instead of a list. [YOCTO #8924] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12scripts/oe-selftest: Add search expression matching to run/list optionsHumberto Ibarra1
The oe-selftest script required an exact matching for the parameters passed to its run-tests-by and list-tests-by options. Many tests can be retrieved here and filtering is a must. This patch add this filtering functionality by enabling the use of wildcards such as "*". [Yocto #8916] Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12glib-2.0: relocate the GIO module directory for native buildsRoss Burton2
Glib hard-codes the install path in search path for GIO modules, which causes problems when glib-2.0-native is restored from sstate with a different build directory. In the future we should relocate symbols directly using the same system that the eSDK uses, but for now use dladdr() to look up where the library was loaded from to build the search path. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12image-buildinfo.bbclass: fix performance problemsPatrick Ohly1
Inheriting image-buildinfo.bbclass primarily slowed down image building for two reasons: 1. The content of the shell command "buildinfo" gets expanded multiple times, each time again checking the state of all layers. 2. When expanded as part of the actual image creation, git is invoked under pseudo, which makes the check quite a bit slower (from a few seconds to a minute with many layers). To fix this, buildinfo now is a Python method which calls the checks only when really executed. Pseudo is told to unload itself when starting git. In addition, "git diff" is invoked with "--quiet", which avoids producing output that is just getting thrown away. As before, any kind of problem or output causes the layer to be marked as "modified". [Revision 2 of the change with some dead code removed] Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12linux-yocto/4.4: gpio-pca953x: add "drive" propertyBruce Ashfield3
Integrating the following commit for the 4.4 kernel: [ gpio-pca953x: add "drive" property Galileo gen 2 has support for setting GPIO modes. Expose these properties through the GPIO sysfs interface. This approach is bit hacky, since it changes the interface semantics. The original patch was by Josef Ahmad <josef.ahmad@linux.intel.com> and made on top of kernel 3.8. ] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python3: fix do_configure check platform triplet errorHongxu Jia2
For p1022ds bsp, the MULTIARCH is powerpc-linux-gnuspev1 and python3 did not recognize the extra 'v1' which caused python3 configure error for the platform triplet. Q:Why Python3 check platform triplet? A:Under Linux, GNU/KFreeBSD and the Hurd, C extensions now include the architecture triplet in the extension name, to make it easy to test builds for different ABIs in the same working tree. vim config.log ... EXT_SUFFIX='.cpython-35m-powerpc-linux-gnuspe.so' ... Here is the generated C extensions which take platform triplet into account. ... |image/usr/lib/python3.5/lib-dynload/_datetime.cpython-35m-powerpc-linux-gnuspe.so ... https://bugs.python.org/issue22980 https://www.python.org/dev/peps/pep-3149/ https://bugs.python.org/review/22980/patch/14593/54808 [YOCTO #9226] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12ncurses_6: Fix an install race conditionJuro Bystricky2
Both targets install.libs and install.includes install the same files, resulting in a race condition when running parallel make. This race is addressed in a patch file, making sure only one of the targets (install.includes) installes the include files. This will work properly (i.e.ncurses will install as intended by the recipe) as long as we always install both targets. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12build-appliance: make the inclusion of downloaded sources optionalJoshua Lock1
Including the entirety of DL_DIR in the generated build appliance image adds a significant amount of space and makes the build appliance image more awkward to distribute. Add a configuration option to make the inclusion of sources option and default to disabling this functionality. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12builder: remove hob from autostartJoshua Lock3
hob has been removed so don't try and autostart it with the mini-x session in the build appliance. Remove the please_wait_dialog program which informed the user to wait for Hob to start. Rename the mini-x autostart file to reflect the removal of hob, we now just start a matchbox-terminal with the environment configured. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12Revert "gstreamer1.0-plugins-XXX: move inherit gettext into common .inc file"Peter Kjellerstedt5
Do not assume that the recipes in OE-Core are the only ones using gstreamer1.0-plugins.inc or that all GStreamer plugins support localization. Without this reversal, all our GStreamer plugin recipes started spewing out: configure: WARNING: unrecognized options: --disable-nls This reverts commit 282fa5ff059db6f6daa108d5ec4ea3d0bfbe0fe2. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12musl: disable building of gobject introspection dataAlexander Kanavin1
When musl is in use, GLib binaries crash on assertion failures under qemu Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12machine/include/arch-x86: Make x32 ABI not supporting gobject-introspection-dataRichard Purdie1
x32 isn't supported by user mode qemu so we can't build gobject-introspection-data, so disable it in this case. (From OE-Core rev: 4ee1eb8ddd3fbe144fbaeb32e07b66e191aa7548) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12bitbake.conf: add 'gobject-introspection-data' to ↵Alexander Kanavin1
DISTRO/MACHINE_FEATURES_BACKFILL This means that introspection data will be generated using qemu by default. If this causes trouble (qemu does not always emulate target architectures perfectly), then add MACHINE_FEATURES_BACKFILL_CONSIDERED = "gobject-introspection-data" to machine configuration or DISTRO_FEATURES_BACKFILL_CONSIDERED = "gobject-introspection-data" to distro configuration. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12packagegroup-core-x11-sato: add python-pygobject and gtk+3Alexander Kanavin1
This allows easy testing of introspection for example using http://python-gtk-3-tutorial.readthedocs.org/en/latest/introduction.html Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12webkitgtk: enable gobject introspectionAlexander Kanavin4
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12recipes-gnome: fix introspection supportAlexander Kanavin17
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python-pygobject: update to 3.18.2Alexander Kanavin4
The new version of pygobject relies in gobject introspection; this has prevented the update previously. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gnomebase.bbclass: do not disable gobject introspectionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gstreamer: enable gobject introspectionAlexander Kanavin16
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12libsoup-2.4: enable gobject introspectionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12clutter: enable gobject introspectionAlexander Kanavin5
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk+3: enable gobject-introspectionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk+: enable gobject introspectionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12avahi: enable gobject-introspectionAlexander Kanavin2
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python-pygtk: remove the recipeAlexander Kanavin11
python-pygtk hasn't been updated in several years, is incompatible with the current version of pygobject, and is generally obsolete as all modern python gtk apps use introspection directly. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12avahi-ui: remove the dependency on python-pygtk by disabling avahi-discoverAlexander Kanavin1
python-pygtk is removed in a separate commit; the reasons for that are explained in that commit's message. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12vala.bbclass: remove pre-packaged vapigen.m4 from tarballsAlexander Kanavin1
We need to make sure that our fixed vapigen.m4 is used instead. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12vala: enable the use of vapigen by packages with vala supportAlexander Kanavin3
Now that gobject-introspection is supported, generation of .vapi files for develeloping Vala code against gobject-based libraries should be supported as well. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection.bbclass: add a class that enables gobject introspectionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk-doc-stub: remove introspection stubsAlexander Kanavin2
As we provide the full introspection support, we need to remove the stubs from this package that conflict with it. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection: Override GIO_MODULE_DIR when scanningRichard Purdie1
This is to stop GLib linking to GConf and other modules (e.g gnutls). If for example gconf is installed in the sysroot then GLib will use it by default for the GSettings backend. This will pull a lot more libraries into the scanner processes and expands the potential for runtime issues since dependencies may be missing of change since they're not in the dependency chain. Use an invalid modules directory so we avoid loading any modules or the libraries they link against which the system may be in the process of rebuilding. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection: add the recipeAlexander Kanavin5
The recipe has comments that explain what is going on and why. Also, there are patches necessary to make it work in Yocto cross-compilation environment; they will be submitted upstream. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 07:43:50 +0000