summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2015-09-19kern-tools: optimize patching peformanceBruce Ashfield1
Updating the kern-tools SRCREV to integrat the following commit: patching: only validate user supplied patches by default Previously the patching tools would consider both system and user supplied patches in the same manner .. they are simply a series of patches to be applied to a branch, and that the scripts should determine where in the series to start (based on what is already on the branch). This detection was causing a few problems: - time consuming - starting in the middle of a series when intermediate patches were merged to a branch. To solve both the performance and start detection, we instead simply note the transition from system (i.e. already defined features and series) and user/recipe supplied patches. When the transition is noted, the system will start pushing ALL patches without doing autoresume detection. Control in keeping the series up to date is passed to the user, and consistent behaviour/performance is achieved. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-19linux-yocto/4.1: aufs, yaffs2 and driver fixesBruce Ashfield3
Updating the 4.1 SRCREVs to integrate the following changes: f830ab33799d aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined 87df2e93ed65 Bluetooth: Delay check for conn->smp in smp_conn_security() b09c3eab3e50 cc2520: set the default fifo pin value from platform data 62b01c325d42 fs/yaffs2: Fix a judgement logic for ACL operations 1d19c4e95cfc yaffs2: remove read and write methods 2c822dbc43b9 yaffs2: replace f_dentry to f_path.dentry Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16autotools.bbclass: mkdir ${B} -> mkdir -p ${B}Robert Yang1
${B} is the default cwd of tasks, so there might be race issues such as: | mkdir: cannot create directory `${B}': File exists [snip] NOTE: recipe perf-1.0-r9: task do_configure: Failed Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16perf: mkdir ${B} -> mkdir -p ${B}Robert Yang1
${B} is the default cwd of tasks, so there might be race issues such as: | mkdir: cannot create directory `/path/to/work/qemux86-poky-linux/perf/1.0-r9/perf-1.0/': File exists [snip] NOTE: recipe perf-1.0-r9: task do_configure: Failed Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16recipetool: add 'newappend' sub-commandChristopher Larson1
This sub-command creates a bbappend for the specified target and prints the path to the bbappend. The -w argument, as with some of the other recipetool commands, will make a version-independent bbappend. Example usage: recipetool newappend meta-mylayer virtual/kernel [YOCTO #7964] Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16oeqa/sstatetests: Add test for nativesdk stamp invariance with MACHINERichard Purdie1
nativesdk-glbic should not rebuild when you change MACHINE but it was. We've fixed that, now add tests to ensure this doesn't happen again. Rather than add yet another stamps test, extend one of the existing ones to cover this instead. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16glibc: Ensure OVERRIDES doesn't influence sstate checksumRichard Purdie1
Switching MACHINE was causing nativesdk-glibc to rebuild. This was from the use of OVERRIDES in one of the functions. Exclude OVERRIDES from the checksum to avoid this. [patch to oe-selftest to ensure this doesn't regress follows] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16image.py: Ensure base image size is an integerPatrick Williams1
There is a floating point multiplication done of a base image size and an "overhead factor", which is currently rounded up to the next integer. If the multiplication results in a whole number, the value will still be a float. When this float is used to generate a shell script, a buggy script is generated. Fix this by always forcing to an integer. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-16python: Add python-misc as rdependency to python-modulesErkka Kääriä1
Currently python-misc is not included even if python-modules is. This means some python scripts fail even if python-modules is included in the image (for example, get-pip.py at bootrap.pypa.io/get-pip.py). This patch adds python-misc as runtime dependency for python-modules. Signed-off-by: Erkka Kääriä <erkka.kaaria@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16cryptodev-tests: don't use STAGING_KERNEL_DIR, fix re-packaging in ↵Denys Dmytriyenko1
multi-machine builds Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16adwaita-icon-theme: RREPLACE gnome-icon-themeJussi Kukkonen1
RREPLACE, RCONFLICT and RPROVIDE gnome-icon-theme to make on-device upgrades work. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16mkelfimage: fix owner for /usr/sbin/mkelfImageRobert Yang1
Fixed: packages-split/mkelfimage/usr/sbin/mkelfImage is owned by uid 15220, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated] This is because its Makefile uses cp -a to install mkelfImage. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-09-16nspr: fix SRC_URIRobert Yang1
Fixed: WARNING: Failed to fetch URL ftp://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.10.8/src/nspr-4.10.8.tar.gz, attempting MIRRORS if available Its ftp:// doesn't work with wget, but http:// works. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16mkefidisk: Create interactive menu for the scriptBruno Bottazzini1
If it is passed only the image parameter, it will show some interactive options to help to conclude the script. With this patch it will detect devices available in the machine, asking to choose what it is wanted to be flashed. it will suggest the target device. If it is a SD card the suggestion is /dev/mmcblk0. If it is a pendrive it will suggest to use /dev/sda. Signed-off-by: Bruno Bottazzini <bruno.bottazzini@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16image.bbclass: add do_rootfs vardeps for {COMPRESS, IMAGE}_CMD_*Christopher Larson1
We want do_rootfs to rerun if the fstype or compression commands or dependencies change for any of our configured fstypes (IMAGE_FSTYPES). IMAGE_TYPEDEP isn't explicitly handled, as it's traversed already, so the end result will change if it does, and we only really care about the results, not how we got there. This uses oe.image.Image()._get_image_types() to get the info about the image and compression types in use. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16squashfs-tools: make it be able to be compiled by gcc5 with "-O0"Roy Li2
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16linux-firmware: package Broadcom BCM4354 firmwareRomain Perier1
Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16perf: fix the install-python_ext on upstream kernelRoy Li1
The Perf source code between Yocto and upstream are different, like below commit is not in upstream, so broaden the "--root" replacement to Makefile* commit 33e96fb1e2d77541e81eb341ccd3fbe9419e4c9a Author: Tom Zanussi <tom.zanussi@intel.com> Date: Tue Jul 3 13:07:23 2012 -0500 perf: change --root to --prefix for python install Otherwise we get the sysroot path appended to the build path, not what we want. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16systemd: fix missing space in SRC_URI appendMartin Jansa1
* it was introduced in: commit 5196d7bacaef1076c361adaa2867be31759c1b52 Author: Aníbal Limón <anibal.limon@linux.intel.com> Date: Fri Aug 28 11:15:01 2015 -0500 Subject: systemd: Increase devices timeout in QEMU machines to avoid failures on serial-getty Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16python: remove --with-wctype-functions configure optionErkka Kääriä1
This option is causing issues with python unicode support. Several unicode related regression tests are currently failing (test_re and test_codecs for example) and removing this option fixes these. This configure option mostly seems to be historical. Discussion related to python issue 9210 (https://bugs.python.org/issue9210) indicates its original goal was to save memory and that the option should have been deprecated ages ago. Signed-off-by: Erkka Kääriä <erkka.kaaria@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16kmod: fix link creation when base_bindir != /binJoshua Lock1
If base_bindir is not a direct child of / the link creation in do_install_append creates incorrect relative links. Instead pass a full path to the link source too the lnr script to create a relative link. Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16prelink: Move to latest releaseMark Hatle1
[YOCTO #8227] The latest release has a fix for prelinking on ARM with recent binutils. For more information on why the change was necessary, see: https://sourceware.org/ml/binutils/2014-06/msg00228.html Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-16glibc: don't require bash for nscd init scriptRoss Burton2
The nscd init script uses #! /bin/bash but only really uses one bashism (translated strings), so remove them and switch the shell to #! /bin/sh. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-15oeqa/decorators: Added decorator to restart the DUT in case of test hang.Lucian Musat2
Once the DUT is hanged during testing, currently all the following test cases have to wait for default timeout to exit. Using this decorator the user can choose a timeout at case by case basis and what happens when the timeout is reached by overwriting the self.target.restart method. [YOCTO #7853] Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-15init-install-efi.sh: Avoid /mnt/mtab creation if already presentLeonardo Sandoval1
The base-files recipe installs /mnt/mtab (it is a softlink of /proc/mounts), so if an image includes the latter, there is no new to created it again inside the install-efi.sh script, otherwise an error may occur as indicated on the bug's site. [YOCTO #7971] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14qemu: Update to upstream patchesRichard Purdie4
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14qemu: remove redundant lines in smc91c111_fix.patchKai Kang1
Remove redundant lines in smc91c111_fix.patch which caused command patch of lower version fails to work. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14webkitgtk: Add patch to fix gcc5 compile issuesRichard Purdie2
Without this patch, webkitgtk fails to build with gcc5. I found Khem had sent the patch against Qt for the same issue we were seeing on mips/ppc. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14webkitgtk: add a new recipe for latest upstream versionAlexander Kanavin2
Also, add a backported patch that prevents too long command lines from happening. Recipe for the obsolete webkit-gtk 1.8.3 is removed in a separate commit. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-14distutils.bbclass: Handle python-backport modulesAlejandro Hernandez1
When installing backport modules they stumble upon each other, complaining with the following error: ERROR: The recipe python-backports-ssl is trying to install files into a shared area when those files already exist. This is the correct behavior since thats just the way they were designed, all backport modules provide an __init__.py file (the same among all packages), and without it they simply wouldnt work. distutils handles FILES_${PN}* variables for python packages, but it uses wildcards to include the required files, hence removing the __init__.py files from each backport package during build time is impossible since it doenst actually contain that value, this patch simply removes the __init__.py* files from the staging area if they already exist on sysroot, this way, these are not included in FILES_${PN} anymore, fixing the issue mentioned above. [YOCTO #8207] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-14xorg-driver: Fix logical && with bitwise and operationKhem Raj2
This must have been a typo which is a bug infact we should have used bitwise & in first place. (From OE-Core rev: 697c6cba6a3d8d2b942c4758a115a063f65febe9) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14distro: update include files related to webkitgtk and epiphany additionAlexander Kanavin2
This commit fixes recipe metadata in distro_alias, package_regex and upstream_tracking includes. (From OE-Core rev: 3fe3df9ea152d6ec39e114d831be24e1aa529165) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14midori: remove the recipe and replace references to midori with epiphanyAlexander Kanavin5
(From OE-Core rev: b7e14c77ffb3d994d59ddc076d7e0263f39546c1) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14webkit-gtk: remove the recipe for the obsolete version 1.8.3Alexander Kanavin10
webkitgtk 2.8.3 is provided instead and midori browser is replaced by epiphany in separate commits. (From OE-Core rev: 1a72dc9c44c7806c869c3b3afcd5d31bcf2da979) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-14epiphany: add a recipe from meta-gnomeAlexander Kanavin2
Epiphany is replacing midori as the browser in oe-core recipe set and poky distribution. (From OE-Core rev: cf1ad936487d5d068304b6e2565bfd556d81baef) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12image_types.bbclass: Restore compatibility with previous UBI filesystemsMike Looijmans1
Support for multiple ubi images has broken dozens of machine deployment scripts in two ways: Previously, ubi filesystems would be named $IMAGE_NAME as one would expect. The current version would append "_rootfs" to that name for no reason. Fix it so that the name for ubi images remains unchanged if there is only one image to build. Machines would append to IMAGE_CMD_ubi, adding extra image processing of their own. This is broken now that IMAGE_CMD_ubi became a variable instead of a function. Make IMAGE_CMD_ubi a function again, this also makes for more logical quotes (I was surprised to find that " within " would even work). Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12image.py: Allow IMAGE_LINK_NAME to be emptyMike Looijmans1
When IMAGE_LINK_NAME is empty, OE will try to create a "blank" link instead of just skipping it. The code checks for "link_name is not None" which will never evaluate to true. Change the test to a simple "if link_name:" so it no longer attempt to create links when the variable is an empty string. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12as-needed.inc: add babeltrace exceptionNathan Lynch1
The babeltrace command has plugins which it specifies in its link step but on which (in the linker's view) it does not depend, so --as-needed causes some of them to be omitted from the executable's dependencies. This prevents babeltrace on OE-built systems from handling streaming/live tracing sessions. Babeltrace's makefiles already try to prevent this by using --no-as-needed, but --as-needed gets placed afterward in the command line, so it wins. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12gcc: reformat 0063-nativesdk-gcc-support.patchRoy Li1
0063-nativesdk-gcc-support.patch can not be applied to source code due to the buggy patch command on sled11, so reformat it, nothing is changed. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12meta: Fix Upstream-Status statementsRoss Burton94
Fix a variety of problems such as typos, bad punctuations, or incorrect Upstream-Status values. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12testimage: Handle core-image-lsb-sdk qemumips test restrictionRichard Purdie1
On qemumips, some tests are slow to the point of the autobuilder appearing hung. We therefore specifically exclude buildsudoku but to do this, we need to list the tests we expect to work on core-image-lsb-sdk. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12oeqa/targetbuild: Ensure we run gnu-configize so config files are up to dateRichard Purdie1
On aarch64 we need to do this as the versions in the upstream source don't recognise the target triplet causing SDK test failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12populate_sdk_base: Fix aarch64 OLDEST_KERNEL sdk issuesRichard Purdie1
aarch64 sets OLDEST_KERNEL to 3.14. This stops the aarch64 SDK installing on anything with an older kernel which is clearly incorrect. I attempted to extract the correct non-overridden version from the data store but it proved problematic and I was running into data store issues. Those are a separate problem but there isn't time to fix this right now. Instead just code the SDK kernel version separately to work around this for now (and fix the autobuilder tests and SDK usage). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12testimage: Fix SDK extraction error handlingRichard Purdie1
Currently if the SDK fails to extract, no error is shown and the test is marked as passed! Clearly this is incorrect, fix it to correctly raise an error. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12devtool: update-recipe: get srcuri parameters with decodeurl()Markus Lehtonen1
Use already existing bb.fetch.decodeurl() for getting the parameters for a URI. This is more fault tolerant and maintainable. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12Revert "ptest: use fakeroot for do_install_ptest_base"Ross Burton1
This reverts commit 56c5fa106eeccda2ca92dbeb73ff01ba40992e7d. (This fix was incorrect and there is a better fix due to be merged) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12u-boot.inc: Add host compiler flags and openssl-native dependencyNathan Rossi1
U-Boot will compile its own tools during the build, with specific configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools require openssl. This patch adds 'openssl' as a PACKAGECONFIG that enables the use of openssl-native as a dependency and also adds the HOSTCC flags that U-Boot uses when compiling the host tools. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12build-compare: add support for examining deb and ipk packagesPaul Eggleton2
This is just rudimentary support at the moment as we'd potentially want to compare the control files a bit more specifically than this does, but it's a start. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-12classes/sstate: break out function to get sstate manifest filenamePaul Eggleton2
It is useful in a few different contexts to see which files have been written out by an sstate task; break out a function that lets us get the path to the manifest file easily. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-12runqemu: avoid image file name mismatchesPatrick Ohly1
Giving anything with -image in it as bootparams or in qemuparams (for example, an additional -drive parameter with an image file or an "-initrd .../core-image-minimal-initramfs-qemux86.cpio.gz") caused runqemu to treat these parameters as names of the rootfs image file. Matching *-image) after checking the current argument for more specific cases like bootparams and qemuparams avoids this misinterpretation of the command line parameters. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-12 00:09:53 +0000